Transact SQL :: Passing Several Values In One Parameter
Nov 12, 2015
In t-sql 2012, I want to run a query where the value is normally an int value. I want to supply a large volume of custID values that are normally int values. I have tried to use a cast and convert values and that does not work. The query that I am trying to use is the following:
DECLAREÂ @custID varchar(200)
set @custID = '72793,60546,91069'
select * from table
where in (@custID)
Thus can you show me the t-sql 2012 that I can use to accomplish my goal?
View 12 Replies
ADVERTISEMENT
Feb 17, 2005
Hi...
I'm creating a procedure to fetch rows from table. One field will come come as IN(). Its the condition. That field is numeric field (note down), i would like to pass the In values as parameter.
eg: procedurename @fieldvalue varchar(100)
as
begin
...
WHERE fieldname IN(@fieldvalue)
while executing the procedure how to pass the value... or procedure itself has problem...?
Help me...
Tx in Advance...
View 2 Replies
View Related
Aug 6, 2015
In temp table there rae data which start with 1 and 2.I want to select only those record which start with 1 Zone is a parameter to the Execute sql task in ssis package..I have created sample code to test when I am running my query I am not getting anything
create table #temp
( zoneid bigint
)
insert into #temp values(100000000000000000)
insert into #temp values(100000000000000000)
insert into #temp values(100000000000000000)
insert into #temp values(100000000000000000)
insert into #temp values(200000000000000000)
insert into #temp values(200000000000000000)
[code]...
View 6 Replies
View Related
Nov 3, 2015
I have a function which accepts table parmeter. i have created a view and i need to use this function.
How can i do it. how can i pass dim table into the @table variable
select * from dim cross apply fnc_user(@table variable)
View 4 Replies
View Related
Aug 4, 2015
I am simplifying things here. Basically I have:
SELECT ......... (my selection criteria)
   where Id in (@Haulers);
@Haulers is supposed to be a comma delimited list.  What do I need to do to make it filter correctly? Â
View 13 Replies
View Related
Oct 16, 2007
Hello,
I have a stored procedure that accepts one parameter called @SemesterParam. I can pass one string value such as €˜Fall2007€™ but what if I have multiple values separated by a comma such as 'Fall2007','Fall2006','Fall2005'. I still would like to include those multiple values in the @SemesterParam parameter. I would be curious to hear from some more experienced developers how to deal with this since I am sure someone had to that before.
Thanks a lot for any feedback!
View 6 Replies
View Related
Jul 2, 2015
I have a sp where query is as below.
DECLARE @ServerCIName varchar(5000)
SELECT * FROMÂ dbo.INC
WHERE Status in ('Assigned','In Progress','Pending')
and Description like '%' + (Select * from SplitDelimiterString(@ServerName,',')) + '%'
and (select DATEADD(dd, DATEDIFF(dd, 0, (Submit_Date)), 0)) = (select DATEADD(dd, DATEDIFF(dd, 0, getdate()), 0))
In place of "and Description like '%' + (Select * from SplitDelimiterString(@ServerName,',')) + '%' ", if I use "and Description like '%' + @ServerName + '%' " and pass a single value, it works.
But @ServerName contains multiple values and it is dynamic (not constant).
How do I query the data?
View 6 Replies
View Related
Oct 24, 2006
I thought this would be quite simple but can't find the correct syntax:ALTER Procedure usp_Product_Search_Artist_ProductTitle
(@ProductTitle varchar(255))
AS
SELECT ProductTitle
FROM tbl_Product
WHERE CONTAINS(dbo.tbl_Product.ProductTitle, @ProductTitle)
My problem is that if I pass "LCD Flat Screen" as teh @ProductTitle parameter the query falls over as it contains spaces. Guess i'm looking for something like: WHERE CONTAINS(dbo.tbl_Product.ProductTitle, '"' + @ProductTitle + "'")Thanks in advance.R
View 4 Replies
View Related
Jul 21, 2015
CREATE TABLE Test
(
EDate Datetime,
Code varchar(255),
Cdate int,
Price int
);
[Code] ....
Now I have to pass multiple param values to it. I was trying this but didnt get any success
exec
[SP_test]'LOC','LOP'
View 10 Replies
View Related
Sep 10, 2015
Table : incident
----------------
incident_id usr_id item_id Inc_Date
10059926 191 61006 8-22-2015
10054444 222 3232 6-7-2015
Table: act_reg
--------------
act_reg_id act_type_id incident_id usr_id act_type_sc
454244 1 10059926 191 ASSIGN
471938 115 10059926 191 TRAVEL TIME
473379 40 10059926 191 FOLLOW UP
477652 115 10059926 191 TRAVEL TIME
489091 504 10059926 191 ADD_ATTCHMNTS
477653 504 10054444 222 ADD_ATTCHMNTSParameter: @attach (value=1, Label=Yes & Value=0, Label=No)
Result (While I am selecting 'Yes' in dropdown)
----------------------------------------------
incident_id usr_id item_id
10059926 191 61006
10054444 222 3232
SELECT incident.incident_id,incident.usr_id,incident.item_id
FROM incident
where exists (How i can write query here to check the act_type_sc=ADD_ATTCHMNTS is exists)
View 7 Replies
View Related
Jun 1, 2015
Below is the query for my procedureÂ
ALTER PROC [dbo].[sp_GetInvitationStatusTest]
(
@invited_by NVARCHAR (50)
)
AS
BEGIN
-- SELECT * FROM dbo.Merck_Acronym_Invitations WHERE invited_by=@invited_by
select distinct t1.invited_isid as 'ISID', t1.invited_name as 'NAME',t1.invitation_status as 'STATUS',
[Code] ....
If you look at the where clause i have invited by , i get the desired output if i just provide 1 name in the execution such as exec [dbo].[sp_GetInvitationStatusTest] 'marfilj' But my requirement is to make the procedure work with more than one input variable such as exec [dbo].[sp_GetInvitationStatusTest] 'marfilj','sujith' now i should get the output for 2 people but if i run this i receive the following error Procedure or function sp_GetInvitationStatusTest has too many arguments specified.
how to make my procedure work with more than 1 input variable?
View 4 Replies
View Related
Jun 7, 2015
Below is the stored procedure i have it works fine if i have 1 value passed to @invited_by but i want to modify but i want this code to be working for multiple inputs .Lets say if i do
exec [dbo].[sp_GetInvitationStatusTest] 'Test1 . I get the desired output but i want this procedure to work for
exec [dbo].[sp_GetInvitationStatusTest] 'Test1,Test2'.
USE [merck_acronyms]
GO
[code]....
View 2 Replies
View Related
Jul 29, 2015
I have two report , first is main report which is matrix and have one parameter User_ids which is multi value selection and my second report is basic chart of user_wise performance.
Now, my main report (matrix ) works fine for Multiple selection of users and i have putted one textbox on main report chart which has action properties set for chart report, when user click on chart button it must goes to chart with user selected in main report. Now , i have used expression for parameter to send it like ..
=join(parameter!user_id!value,",") which pass selected value to chartÂ
And when I am selecting single user it passing that value to chart parameter list but , when it is more than one user it errors with conversion failed when converting the nvarchar value '121,128' to data type int. But my chart also works when passing 121,128 in user parameter in preview of report .
View 2 Replies
View Related
Dec 3, 2015
Using SQL Server 2008R2 and Report Builder 3.0..I have an action set in a text box of a table. My intent is to pass the value of that text box (which is variable) to a sub-report in a popup window. Here's my code: URL....The parameter of the report I'm trying to open is @SONum.I'm guessing my error is involved in the formatting of how the value of the parameter is being passed. I've also seen examples where the report server and report values were parameterized, but I don't know where to define
Parameters!ServerAddress.Value anywhere.Do I need to have something set up a certain way within the report I'm opening? Here's the report Parameter settings on the report I'm trying to open.
View 3 Replies
View Related
Oct 15, 2007
Hi,
I have parameters in my report. The user can choose the year, month and date (3 parameters).
Now I want to set default vaules for the parameters , so that the user sees the report for example for the current day without selecting the parameters. I tried to set the type of the parameters to DateTime and the default value for example for the year to "=Today().Year" . But when I execute the report an error occures . Something like : no validValue for this parameter.
My Attributes for the year month and date are from an Analyis Services Cube from a Server Time dimension .
Does somebody know how to make it possible to set default values for this parameters?
Other question :
Does somebody know how I can reduce the values for a parameter. For Example I have a parameter "year" from a server time dimension from a cube. The values which are available are "Year 2004", "Year 2005", "Year 2006", "Year 2007".
But I want that the user only can choose "Year 2006" or "Year 2007" ant not every Year or "All".
Or Other Example: The User should only choose a Date that is int the past or Today but not a Date in the future.
Thanks !
JF
View 7 Replies
View Related
Aug 11, 2005
Is it possible to fill a parameter list with values based on another parameter value?
Here's what I have so far (which hasn't worked)...
I'd like to generate a report listing information for a student. The report viewer would first select a school from the first drop-down menu, and then the second drop-down menu would populate with the list of students at that school.
I have a dataset that calls a sp which returns a list of schools (SchoolID and SchoolName fields from the database table).
I have another dataset that calls a sp (with SchoolID as the parameter) which returns a list of students for that school.
Both datasets return the appropriate data when tested individually, but when I set up the Report Parameters and build the report, these errors come up...
The value expression for the query parameter '@SchoolID' refers to a non-existing report parameter 'SchoolID'.
The report parameter 'Student' has a DefaultValue or a ValidValue that depends on the report parameter "SchoolID". Forward dependencies are not valid.
...Is it possible for the reoprt to generate a list of available parameter values based on the value selected for another parameter?
Any help you can give me would be great!! Thank you
View 5 Replies
View Related
Apr 11, 2008
I have my stored procedure set to
Territory_code IN (@Territory)
, now , how do i enter in more then one value. When i select the multi value check box, it gives me more spaces. But then doesnt recognize the values when i put in more then one. am i doing something wrong?
The field is a Varchar 20
View 1 Replies
View Related
Jul 28, 2015
I have a string variable
string str1="1,2,3,4,5";
I have to use the above comma separated values into a SQL Search query whose datatype is integer. How would i do this Search query in the IN Operator of SQL Server. My query is :
declare @id varchar(50)
set @id= '3,4,6,7'
set @id=(select replace(@id,'''',''))-- in below select query Id is of Integer datatype
select *from ehsservice where id in(@id)
But this query throws following error message:
Conversion failed when converting the varchar value '3,4,6,7' to data type int.
View 4 Replies
View Related
Aug 26, 2015
I developed the following T-SQL query that runs successfully, but I was looking for a more efficient and concise way to do this. Is there a CTE that can replace all of these case statements? I've updated my query as below. Although this sample query works, it's not working for my real data. Instead, I get an error. At the bottom is the error part of my real query.I copied all of the tables from the first query block below. But when I wrote the bottom query block, it underlined in red the words "answer" and "question." It says "Invalid column name".Â
if exists (select * from tempdb.dbo.sysobjects o where o.xtype in ('U') and o.id = object_id(N'tempdb..#hard_values')
) DROP TABLE #hard_values;
if exists (select * from tempdb.dbo.sysobjects o where o.xtype in ('U') and o.id = object_id(N'tempdb..#dummy_data')
) DROP TABLE #dummy_data;
if exists (select * from tempdb.dbo.sysobjects o where o.xtype in ('U') and o.id = object_id(N'tempdb..#temp')
[code]...
View 13 Replies
View Related
Apr 30, 2007
Hi All.
I have a parameter (hidden) that gets its value using an expression base on another parameter.
When in the designer, the first time when the designer loads I can select the Parameter that controls the child parameter (expression lies in the default value section). The value changes.
When I change the parent parameter again, the value of the child parameter does not seem to change.
How can I make this parameter change automatically when the parent is changed ?
Any help will be appreciated.
Thanks,
Neil
View 3 Replies
View Related
Jan 18, 2002
Hi,
I have a stored proc as follows:
Create stored procedure sp_test
@Cno nvarchar (1000) AS
SELECT * FROM Contracts WHERE Cno IN (@Cno)
How do I actually pass the parameters to the stored proc?
sp_test "'cn01','cn02','cn03','cn04'" doesn't work.
In VB.NET this doesn't work either:
dim s as string = "'cn01','cn02','cn03','cn04'"
cmd.parameters.add(new sqlparameter("@Cno",nvarchar,1000))
cmd.parameters("@Cno").value = s
I don't want to parse the string inside the proc and then Exec the parsed string.
TIA
Jeremy Holt
View 5 Replies
View Related
Apr 9, 2008
Hi ,
I have this situation,I need to store results of a Select Count(*) from TableA to a parameter and only if the value of the count(*) is greater than 50,000,a notification mail would be sent out to the table owner.Currently this is what I have done:
1) Use SQL task to include "Select Count(*) from TableA"
2) In parameter mapping tab of SQL Task, define the following
Parameter name : Table::Count
Direction: Input
Data Type: Numeric
Parameter Name : @Count
3) I have connected the SQL Task to a Send Mail Task [ Only If @count>50 000, then a mail should be sent out]
4) The constraints has been set as
Evaluation Operation : Expression and Constraints
Value: Success
Expression : @Count >"50000"
In SSIS tab > Variable
I have set the following
Variable Name : Count
DataType : Int32
Can someone advise me where I am going wrong, as when I execute the SQL Task turns greens and ends.Even when the count of tableA is greater than 50 000, no mails I sent out[send mail task does not get executed]
Thank You in Advance
View 12 Replies
View Related
Mar 18, 2008
how can i pass report parameter via URL?
my jump to URL link is:
http://itreportsme096/Reports/Pages/Report.aspx?ItemPath=%2fDevelopment%2fhoneylette%2fdetailed+phone+calls
and i want to pass two parameters: billingmonth and phoneno
how can i do that?
View 7 Replies
View Related
Jul 23, 2005
I have a stored procedure named "processInventory" like the following.Depending on the passed in parameters, I would like to add a WHEREclause for "select" action. For example, if any varchar type ofparameter is passed in, the where clause would use "LIKE" operator. Forexample, "Select * from Main where [s/n] like @Serial. All other typeswill use "=" operator. For example, "Select * from Main where MAKE =@Make and Type = @type".How could this be achieved? Thanks.CREATE PROCEDURE processInventory@Action varchar(7),@ControlNumber int = null,@AssetTag int = null,@Serial varchar(50) = null,@Description varchar(50) = null,@Make int = null,@Type int = null,@Model int = null,@Status int = null,@Networked bit = null,@LoginName varchar(50) = null,@Shared bit = null,@Org varchar(15) = null,@RecordDate datetime = null,@LastUpdate datetime = null,@ManufactureDate datetime = null,@Comment ntext = nullASdeclare @processError intset @processError = 0if @Action = 'Select' goto selectInventoryelseIf @Action = 'Update'beginif @ControlNumber = null return(1) --Required parameter value notspecifiedelsegoto updateInventoryendelseif @Action = 'Insert'beginif @Serial = null return(1) --Required parameter value notspecifiedelsegoto InsertInventoryendelseif @Action = 'Delete'beginif @ControlNumber = null return(1) --Required parameter valuenot specifiedelse goto deleteInventoryendselectInventory:if @Serial <> nullbeginselect * from Main where [S/N] like @Serialif @@Error<>0beginset @processError = @@Errorreturn @processErrorendendelseif @ControlNumber <> nullbeginselect * from Main where ControlNumber = @ControlNumberif @@Error <>0beginset @processError = @@Errorreturn @processErrorendendelseselect top 100* from MainupdateInventory:update MAINset [Org Asset Tag] = @AssetTag, [S/N] = @Serial, [Description]= @Description, Make = @Make, Type = @Type,Model = @Model, Status = @Status, Networked = @Networked,LoginName = @LoginName, Shared = @Shared,Org = @Org, [Date Of Record] = @RecordDate, [Date LastUpdated] = @LastUpdate, [Manuf Date] = @ManufactureDate,Comments = @Commentwhere ControlNumber = @ControlNumberif @@ERROR <> 0beginset @processError = @@ERRORreturn @processErrorendelsereturn(0) -- successful updateinsertInventory:insert MAIN([Org Asset Tag], [S/N], [Description], Make, Type,Model, Status, Networked, LoginName, Shared,Org, [Date Of Record], [Date Last Updated], [ManufDate],Comments)values(@AssetTag, @Serial, @Description, @Make, @Type, @Model,@Status, @Networked, @LoginName, @Shared,@Org, @RecordDate, @LastUpdate, @ManufactureDate,@Comment)if @@ERROR <> 0beginset @processError = @@ERRORreturn @processErrorendelse return(0) -- successful insertdeleteInventory:delete MAIN where ControlNumber = @ControlNumberif @@ERROR <> 0beginset @processError = @@ERRORreturn @processErrorendelse return(0) -- successful deleteGO
View 4 Replies
View Related
Jun 17, 2005
I don't understand how to pass a parameter to a dts package from another. In SQL 2000 you can map a variable with a variable of the package you will call.
View 10 Replies
View Related
May 11, 2006
Hi all
I need to pass parameters when I call a .SQL file.
Is there a way to do this in SQL Server?
thanks!!!!
View 5 Replies
View Related
Dec 21, 2006
Hi guys...
As of now I'm working on a certian report which needs to pass a certain parameter to another dataset... I'm refering to the dataset of the same report. Can anyone tell me how this is done? I really need to know it to finish my report...
Thanks a bunch in advance!
View 4 Replies
View Related
Jan 9, 2007
Request is to have a Requirement number from the requirement form generate a report in Reporting Services with the requirement number as a filter.
I can set up the parameter - how does the value get there? Should I be asking this question in the Visual C# group?
Thanks!
Terry B
View 1 Replies
View Related
Sep 14, 2006
My data table contains a column (a foreign key) with numbers from 0 and up. (it could be null or a number. I used ISNULL to convert it.) I want to be able to select in three ways. 1) equals zero (or is null)2) greater than zero (or is not null)3) equal to a specific number.How do I do this?My application setup is Presentation Layer, BLL, DAL and Sql Server.I don't want to create another Query because this is only part of a larger query with other parameters.If I could just do something like @IDOperator @IDValue in the Filter of the Sql it would be great.
View 2 Replies
View Related
Aug 9, 2004
Hello,
Can someone kindly point out what is wrong with the following code file. I'm trying to:
- fill a dropdown from a db on page load (this works!)
- when user selects from the list and hits a button, pass the dropdown value to a second query
- use the second query to make another call to the db and fill a data grid
In the code below, if I swap an actual value (eg '1005') into the command and comment out the .Parameter.Add statements, the dategrid is filled sucessfully. Otherwise, when the button is pressed, nothing is displayed.
Thanks
PS comments about my coding approach are welcome - I'm new to aspx...
<%@ Language="VBScript" Debug="true"%>
<%@ Import Namespace="System.Data" %>
<%@ Import Namespace="System.data.SqlClient" %>
<html>
<head>
<script language="vb" runat="server">
Dim dbConnection As SqlConnection
Dim ds_Teams,ds_Agents As DataSet
Dim sqlCmd_Teams,sqlCmd_Agents As SqlDataAdapter
Dim dbConn = "server=csacd01;uid=mpierce;pwd=cabledog;database=clearviewacd"
Dim sql_select_teams = "" & _
"SELECT team_no, team_name " & _
"FROM dbo.team " & _
"WHERE (team_status = 'Curr')"
Dim sql_select_agents = "" & _
"SELECT last_name + ', ' + first_name AS name, agent_no " & _
"FROM dbo.users " & _
"WHERE (team_no = @Team) AND (NOT (agent_no = '1029')) " & _
" AND (NOT (last_name IS NULL)) " & _
" AND (NOT (first_name IS NULL)) " & _
" AND (NOT (first_name = 'FirstName')) " & _
"ORDER BY last_name"
Dim teamList = "teamList"
Dim agentList = "agentList"
Sub Page_Load(Sender As Object, E As EventArgs)
if not (IsPostBack)
ds_Teams = new DataSet()
dbConnection = New SqlConnection(dbConn)
sqlCmd_Teams = New SqlDataAdapter(sql_select_teams, dbConnection)
sqlCmd_Teams.Fill(ds_Teams, teamList)
dbConnection.close()
dropdownlist_Teams.DataSource=ds_Teams.Tables(teamList).DefaultView
dropdownlist_Teams.DataBind()
end if
End Sub
sub Get_Agents(Sender As Object, E As EventArgs)
ds_Agents = new DataSet()
dbConnection = New SqlConnection(dbConn)
sqlCmd_Agents = new SqlDataAdapter(sql_select_agents, dbConnection)
sqlCmd_Agents.SelectCommand.Parameters.Add(new SqlParameter("@Team", SqlDbType.NVarChar,4))
sqlCmd_Agents.SelectCommand.Parameters("@Team").Value = dropdownlist_Teams.DataValueField
sqlCmd_Agents.Fill(ds_Agents,agentList)
dbConnection.close()
datagrid_Agents.DataSource=ds_Agents.Tables(agentList).DefaultView
datagrid_Agents.DataBind()
end sub
</script>
</head>
<body>
<form runat="server">
<asp:DropDownList id="dropdownlist_Teams" runat="server"
DataTextField="team_name"
DataValueField="team_no">
</asp:DropDownList>
<input type="submit" onserverclick="Get_Agents" value="Get Agents" runat="server"><br />
<ASP:DataGrid id="datagrid_Agents" runat="server"
Width="500"
BackColor="#ccccff"
BorderColor="black"
ShowFooter="false"
CellPadding=3
CellSpacing="0"
Font-Name="Verdana"
Font-Size="8pt"
HeaderStyle-BackColor="#aaaadd"
EnableViewState="false"
/>
</form>
</body>
</html>
View 1 Replies
View Related
Dec 17, 2005
Interesting problem, selecting and updating (with reference to a Form View) works great. Whenever I try to delete I get this error:Must declare the variable '@template_id'.
Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Must declare the variable '@template_id'.
Here is my code:<asp:SqlDataSource ID="SqlTemplateDS" runat="server"SelectCommand="SELECT [template_id], [client_id], [language], [label], [email_default], [email_template], [event_template] FROM [CMT] ORDER BY [template_id]"DeleteCommand="DELETE FROM CMT WHERE (template_id = @template_id)" ConnectionString="<%$ ConnectionStrings:BrandMSConnectionString %>"> </asp:SqlDataSource><asp:GridView ID="grdTemplates" runat="server" AutoGenerateColumns="False" DataKeyNames="template_id" DataSourceID="SqlTemplateDS" Font-Names="Verdana" Font-Size="Small" ForeColor="Black" Width="100%" OnSelectedIndexChanged="grdTemplates_SelectedIndexChanged" CellPadding="2"> <Columns> <asp:BoundField DataField="template_id" HeaderText="ID" ReadOnly="True" SortExpression="template_id" /><asp:BoundField DataField="client_id" HeaderText="Client" SortExpression="client_id" /><asp:BoundField DataField="language" HeaderText="Language" SortExpression="language" /><asp:BoundField DataField="label" HeaderText="Label" SortExpression="label" /><asp:CheckBoxField DataField="email_default" HeaderText="Default" SortExpression="email_default" /><asp:CheckBoxField DataField="email_template" HeaderText="Email" SortExpression="email_template" /><asp:CheckBoxField DataField="event_template" HeaderText="Event" SortExpression="event_template" /> <asp:TemplateField HeaderText="Options"><ItemTemplate> <asp:LinkButton ID="btnModify" CommandName="Select" runat="server" ForeColor="Blue">Edit</asp:LinkButton> | <asp:LinkButton ID="btnDelete" CommandName="Delete" runat="server" ForeColor="Blue">Delete</asp:LinkButton></ItemTemplate></asp:TemplateField> </Columns><HeaderStyle BackColor="Khaki" /><AlternatingRowStyle BackColor="Beige" /></asp:GridView>Any ideas?Chris
View 1 Replies
View Related
Apr 28, 2006
why this wont work?error: Exception Details: System.Data.SqlClient.SqlException: Procedure or Function 'test1' expects parameter '@cid', which was not supplied..................................................................................ASPX CODE: string cid12; cid12 = "user5"; // Connection ConnectionStringSettings mysettings; mysettings = System.Configuration.ConfigurationManager.ConnectionStrings["dbase1_connection"]; string myConnectionString = mysettings.ConnectionString; SqlConnection conn1 = new SqlConnection(myConnectionString); SqlCommand cmd = new SqlCommand(); cmd.Connection = conn1; cmd.CommandText = "test1"; cmd.CommandType = CommandType.StoredProcedure; SqlParameter param = cmd.Parameters.Add("@cid", SqlDbType.NChar, 20); param.Direction = ParameterDirection.Input; param.Value = cid12; conn1.Open(); cmd.ExecuteNonQuery(); conn1.Close();.................................................................................STORED PROCEDURE:ALTER PROCEDURE dbo.test1 ( @cid nvarchar(20) )AS /* SET NOCOUNT ON */ select tech_id, customer_id, issue_main from [case] where customer_id = @cid --GO RETURN.................................................................................im using asp.net, C#, and sql expressforgive me. im new to this .netPLS HELP
View 1 Replies
View Related
Jul 19, 2004
possible to pass in a query as a parameter to a stored proc?
Number of constraints right now would make it a lot easier if I could pass in a query that selects all the ID's, tried but couldn't come up w/anything, just have a simple proc that does the deletes on 1 ID @ a time...since there are up to 100 that will need to be deleted, the qry as a param would be much more convenient. below is the proc...Thx for any help.
Code:
CREATE PROCEDURE [dbo].[s_DeletePeople]
@PeopleID int
/* single id to be deleted, tried just passing
* in a query that resembled a string and using it
* but it didn't work either.
*/
AS
Deletefrom tProjectManager
whereManager_ID in (@PeopleID)
Deletefrom tMerchandiser
whereID in (@PeopleID)
Deletefrom tProjectCall
wheremerchandiser_id in (@PeopleID)
Delete from tManager
whereID in (@PeopleID)
Deletefrom tDistrictManager
whereID in (@PeopleID)
Deletefrom tPeople
whereID in (@PeopleID)
....and on and on
GO
View 2 Replies
View Related
