I want to populate a datetime column on the fly within a stored procedure. Below is the query that I currently have that does same but slows down query performance.
CREATE TABLE #TaxVal
(
ID INT
, PaidDate DATETIME
, CustID INT
, CompID INT
[code]...
Which is the best way to write this query for better performance?
How can I calculate a DateTime column by merging values from a Date column and only the time part of a DateTime column?
View 5 Replies View RelatedI have a TableA where data get inserted from Excel(IMPORT/EXPORT wizard)
TableA;
ID(identity) Date (NOT NULL Defaulyt Getdate() )
Name Phone
1 2014-06-17 17:28:21.190
Nick 12345678910
2 2014-05-17 17:28:21.190
Stan 00045678910
3 2015-08-17 17:28:21.190
Kim 11111678910
4 2015-08-17 17:28:21.190
Tom NUll
3,4 are the rows i have inserted now , you can see by date, likewise i have 100,000 rows(old and new combination) and now the data from excel to TableA can be imported/exported daily , hourly, weekly basis.
Now i want to find out only the rows which are imported to tableA today, or hours back, or yesterday .....
the reason is ,
Step1:get data from excel and import to tableA( this is a manual Step) and i know when the data is inserted with exact date and time.
Step2: get newly inserted rows from TableA and pass them as Parameters in Stored Procedure.( i may run step 2 after 1 hour, or after 1 day or after 1 week ,but i want only rows that are inserted )
I tried with using where Datecreated, but did work.
I need to set only the date part of tblEventStaffRequired.StartTime to tblEvents.EventDate while maintaining the time part in tblEventStaffRequired.StartTime.
UPDATE tblEventStaffRequired
SET StartTime = <expression here>
FROM tblEvents INNER JOIN
tblEventStaffRequired ON tblEvents.ID = tblEventStaffRequired.EventID
I just need the date, hour, and minute...not the micro seconds. Do I have to DATEPART and concatenate each or is there any way to simply truncate the milliseconds from it? Or is there a date format to put extract and report on it as...
MM/DD/CCYY HH:MM:SS AM
I see there is a format 131 that puts it in..
DD/MM/YYYY HH:MM:SS:MMMAM
Please help!
I am designing an SSIS package and need to change the value of a DateTime global variable with the value returned from an Execute SQL task. The queary is as follows:
Select Versiondate = dateadd(dd,+1,Max(CreateDate)) from msdb..sysdtspackages p with(nolock)
where name = '@name'
The error message is as follows:
SSIS package "Package.dtsx" starting.
Error: 0xC002F210 at VersionDate_Set, Execute SQL Task: Executing the query "Select Versiondate = dateadd(dd,+1,Max(CreateDate)) from msdb..sysdtspackages p with(nolock)
where name = '@name'" failed with the following error: "The type of the value being assigned to variable "User::VersionDate" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: VersionDate_Set
SSIS package "Package.dtsx" finished: Success.
The variable is set to data type DateTime, but the value will not change. Any ideas?
I am trying to pull the records which are being affected i.e, comparing the values and if not same then populating the record.
I am using the below condition in where clause however i am getting runt time error as "Conversion failure when converting date and/or time from character string"
Condition in Where clause:
cast(isNull(tab1.Col1,'') as datetime) <> cast(isNull(tab2.col1,'') as datetime)
Note: Both col1 columns are of type nvarchar
Have two tables: table1 and table2
Working with two main columns in both tables: D_ID and C_ID.
Table1 has D_ID populated and C_ID is not.
Table2 is a cross reference table with both D_ID and C_ID values within.
Looking for best way to populate C_ID in table1 from C_ID values in table2 where table1.D_ID = table2.D_ID.
There are too many values to do a case in stored procedure which has been my best practice. Trying to up my game with using SSIS 2012 as well.
I have a table with two columns:
OwnerName Owner
John;Smith
Mary;Smith
OwnerName is populated. Owner is not.
I want to populate the Owner column with the OwnerName in alphabetical order. I have already created a function to do this.
Select fnGetOwner(OwnerName) from OwnerTable. This returns:
Smith, John
Smith, Mary
How do I populate the blank Owner field beside the OwnerName in the OwnerTable?
Hello, all.
I am new to SQL querying and I came across an issue while experimenting.
Say, I have two tables like the following, a Users table at the top, and a Roles table at the bottom (drawing the issue as I'm not fluent in English to explain):
(Users table)
UserId | RoleId | RoleOldId
-------+--------+----------
1......|x.......|11........
2......|y.......|22........
3......|z.......|22........
(Roles table)
RoleId | RoleOldId | RoleName
-------+-----------+-------------
10.....|11.........|Anonymous....
20.....|22.........|Superuser....
30.....|33.........|Administrator
The Roles table was changed to include a new column Roles.RoleId and the old column is named Roles.RoleOldId. Same is done for Users table.
Assume these are not foreign and/or primary keys. How can I fill Users.RoleId with new Roles.RoleIds, matching RoleOldIds at each tables? The resulting (x, y, z) set of Users table will be (10, 20, 20).
Thank you for your time.
Sorry I'm pretty new to SQL so I don't know if this is a simple question. I have a table, and I am trying to add a column to the table and populate this column using what would be called an 'IF' function in Excel.
Basically 'column A' has numbers in it. I want SQL to look at 'column A' and if the first 5 digits of the number in 'column A' are 00001, then put 'description A' into new column 'column B'. If the first 5 digits of the number in 'column A' are 00002, then put 'description B' into 'column A' etc.
Any ideas?
I have a table of id numbers that I wish to mask. My thought was to create a new column for this new id number and populate it with a unique sequential value - start at 1 and go as high as needed. My problem is that I cannot recall how to populate that column with a number...
View 4 Replies View RelatedI'm having some issues getting OLE DB Data Sources to work w stored procs in SSIS. Here's the situation.
I have an OLE DB Data Source set up to call a stored proc w no parameters. The stored procedure loops through a set of databases and inserts data from each database into a results table. I'm attempting to return the results table to SSIS, but the Available External Columns are not populating. However, previewing the query in SSIS does show results. The insert in to the results table is done by a call to sp_executesql.
I've tried setting the results table up as a temp table, table variable, and static table. I have NOCOUNT set ON and am only returning one recordset. I've seen the other threads in here about similar problems, but none of their solutions seem to work for me.
Any help would be much appreciated....
Hi,
I'm inserting a datetime values into sql server 2000 from c#
SQL server table details
Table nameate_test
columnname datatype
No int
date_t DateTime
C# coding
SqlConnection connectionToDatabase = new SqlConnection("Data Source=.\SQLEXPRESS;Initial Catalog=testdb;Integrated Security=SSPI");
connectionToDatabase.Open();
DataTable dt1 = new DataTable();
dt1.Columns.Add("no",typeof(System.Int16));
dt1.Columns.Add("date_t", typeof(System.DateTime));
DataRow dr = dt1.NewRow();
dr["no"] = 1;
dr["date_t"] = DateTime.Now;
dt1.Rows.Add(dr);
for(int i=0;i<dt1.Rows.Count;i++)
{
string str=dt1.Rows["no"].ToString();
DateTime dt=(DateTime)dt1.Rows["date_t"];
string insertQuery = "insert into date_test values(" + str + ",'" + dt + "')";
SqlCommand cmd = new SqlCommand(insertQuery, connectionToDatabase);
cmd.ExecuteNonQuery();
MessageBox.Show("saved");
}
When I run the above code, data is inserted into the table
The value in the date_t column is 2007-07-09 22:10:11 000.The milliseconds value is always 000 only.I need the millisecond values also in date_t column.
Is there any conversion needed for millisecond values?
thanks,
Mani
I have a table that has a unique ID and a datetime of when something changed.
See example:
ID TimeStamp
16094 2013-11-25 11:46:38.357
16095 2013-11-25 11:46:38.430
16096 2013-11-25 11:46:38.713
16097 2013-11-25 11:46:38.717
16098 2013-11-25 11:46:38.780
[Code] ....
Is there a way I can calculate the difference between row 16106 and 16105 and enter it in line 10601.
I am trying to make a stored procedure in SQLServer Express.The question is related to this stored procedure / transact - sql. I think i am doing something wrong with datetime.Here is the stored procedure.The error i am getting is that:Msg 241, Level 16, State 1, Line 20Syntax error converting datetime from character string. ===================================== DECLARE @websiteID intDECLARE @dateFrom datetimeDECLARE @dateTo datetimeDECLARE @sortbystring varchar (20)set @websiteID = 1set @dateFrom = Convert(datetime, '2007-02-07 12:01:00')set @dateTo = Convert(datetime, '2007-03-07 11:59:00')set @sortbystring = 'Campaign'IF ISNULL(@dateTo, '') = ''begin SET @dateTo = @dateFromendSET @dateTo = DATEADD(d, 1, @dateTo)DECLARE @str CHAR(400)LINE 20: SET @str = 'SELECT dateEntry, c.name as Campaign, e.firstname as FirstName FROM entry e, campaign c WHERE e.campaignID = c.id ' + 'AND c.websiteID = @websiteID' + 'AND (ISNULL(' + @dateFrom + ', '''') = '''' OR e.dateEntry BETWEEN '' + @dateFrom + '' AND '' + @dateTo + '') ' + 'AND e.IP NOT IN (SELECT IP FROM IP) ' + ' ORDER BY dateEntry DESC'print (@str)===============================================
View 9 Replies View RelatedHow do you cast 0 as DateTime? Is this possible to do.I am using UNION to combine two tables. I get an error when doing so...
Msg 206, Level 16, State 2, Line 1
Operand type clash: int is incompatible with date
SELECT TOP (100) PERCENT
Opportunity_Name
,Status
,Closed_Status
[code]....
I understand what is causing the error. In the top select statement both Closed_Status AND Expected_Close_Date are datetime values. But in the bottom statement they are int.
I understand what is causing the error. In the top select statement both Closed_Status AND Expected_Close_Date are datetime values. In the bottom statement they are int. So I tried CASTing them as datetime, that didn’t work and I get this error.<o:p></o:p> Conversion failed when converting the varchar value 'Open' to data type int.Is there a way to CAST 0 as a DateTime
I have this datetime: '2002-12-20 11:59:59'
I want to convert this to date (yyyy-mm-dd) to integer
This works fine for: SELECT CONVERT(INT, GETDATE())
But it doesn't work here: SELECT CONVERT(INT, '2002-12-20 11:59:59')
I want to convert date to integer without passing through any varchar conversion/result.
I have below string, which is a datetime value
I want to convert it into datetime data type and insert into table
DECLARE @Date VARCHAR(100)
SET @Date='10312013122642'
I am trying to automate a load of insert cmd but some of them contain date times so i am trying to insert the following but keep getting
Msg 241, Level 16, State 1, Line 1
Conversion failed when converting date and/or time from character string.
What is wrong with the cmd??
INSERT INTO client VALUES (100, NULL, NULL, NULL, NULL, 1, NULL, 0, 0, 0, 0, 0, NULL,Cast( '2013-03-11 10:54:46.529' as datetime))
I have a datetime stamp and I want to round off the the time to 11:00 if the timestamp is between 5AM and 5PM. If it is beyond then round off to 23:00. I don't use date I only use timestamp in my query so I just want to round off the timestamp. Is there is function to do that.
View 3 Replies View RelatedI have a data column coming in from a 3rd party vendor in the format of CCYYMMDDHHMMSS. How can I convert this data to a [datetime] format?
CAST(CAST([TransactionDate] AS CHAR(14)) AS datetime)
Is that correct?
Any easier way to do what I am trying, without having a table with all the dates and week numbers.
Scenario: Week number of a DateTime Field where the year does not start on January 01<sup>st</sup> but April 1<sup>st</sup> to 31 Mach.
Issue: A week always starts on a Monday so if the 1<sup>st</sup> is on Tuesday, the first week is Tuesday – Sunday, if the 1<sup>st</sup> April is on Friday, the 1<sup>st</sup> week is Friday – Sunday and 7 day periods from there.
CREATE
TABLE [dbo].[DailyCanx](
[ID] [int] IDENTITY(1,1)
NOT NULL,
[DateCancelled] [datetime] NULL
)
ON [PRIMARY]
[code]....
I could create a table with all the start date and end dates of all the week numbers but I think there must be a better way. using SQL Server 2008 R2.
I have the following table
Table Name EmployeeInformation
EmployeeID EmployeeFirstName EmployeeLastName
1 |John |Baker
2 |Carl |Lennon
3 |Marion |Herbert
Table Name PeriodInformation
PeriodID PeriodStart PeriodEnd
1 |1/1/14 |12/30/14
2 |1/1/15 |12/30/15
[code]...
I want a query to join all this tables based on EmployeeID, PeriodID and LeaveTypeID sum of LeaveEntitlement.LeaveEntitlementDaysNumber based on LeaveTypeID AS EntitleAnnaul and AS EntitleSick and sum AssignedLeave.AssignedLeaveDaysNumber based on LeaveTypeID AS AssignedAnnaul and AS AssignedSick and subtract EntitleAnnaul from AssignedAnnual based on LeaveTypeID AS AnnualBalance and subtract EntitleSick from AssignedSick based on LeaveTypeID AS SickBalance
and the table should be shown as below after executing the query
EmployeeID, EmployeeFirstName, EmployeeLastName, PeriodID, PeriodStart, PeriodEnd, EntitleAnnual, AssignedAnnual, AnnualBalance, EntitleSick, AssignedSick, SickBalance
I have a table of errors with a DateTime field for when the error occurred. I want to query the table for a given date range omitting the time portion. What is the most efficient way to perform this query?
View 5 Replies View RelatedI have a datetime field for e.g 2015-09-15 00:00:00.000 and an integer field for e.g.100809.
The integer field is actually a time value as in hours,minutes,seconds. For e.g. the value
100809 means
10-hours
08-minutes
09-seconds
I need to combine the datetime and the int field to get the output as below
2015-09-15 10:08:09
I have a view in my database detailing the expiry date of each credential for each employee. The view is designed as to display one record per employee and in that record is the expiry date of each credential and the days remaining. So the columns are as follows:-
Employee CodeExpiry Date (x8 columns) (named as credential e.g. [Passport])
Days Remaining (x8 columns) (named as "TS_" + Credential)
I'm trying to use the CASE function to compare each DATETIME column with one another and retrieve the minimum. How can I return the minimum date as a run-time column and sort the view by this column? My code is as follows:-
SELECT [Passport],[TS_Passport],[Visa],[TS_Visa],[Civil_ID],[TS_Civil_ID],[KOC_Pass],[TS_KOC_Pass],[JO_Pass],[TS_JO_Pass],
[Ratqa_Pass],[TS_Ratqa_Pass],[Driving_License],[TS_Driving_License],[Health_Book],[TS_Health_Book], CASE
WHEN Passport <= Visa AND Passport <= Civil_ID AND Passport <= KOC_Pass AND Passport <= JO_Pass AND
[code]....
I've been told that this is the most efficient given the number of records in my database. The Min_Date is always NULL. I need the minimum of the 8 dates to be the Min_Date.
I am trying to spilt records into days by the start - End datetime.
I would send an image and data but because I am new to the forum, I am blocked sending images.
"Body text cannot contain images or links until we are able to verify your account"
How I can forward an image.
I am having issues trying to write a query that would provide me the unique GUID numbers associated with a distinct PID if the unique GUID's > 1. To summarize, I need a query that just shows which PID's have more than one unique GUID. A PID could have multiple GUID's that are the same, I'm looking for the PID's that have multiple GUID's that are different/unique.
Table1
GUID PID
GUID1 PID1
GUID1 PID1
GUID1 PID1
GUID2 PID1
GUID3 PID2
GUID3 PID2
GUID3 PID2
The result of the query would only have PID1 because it has two unique GUID's. PID2 would not be listed has it has the same GUID3 in each row.
Result:
PID1
My CTE is failing and I don't know why...Is there a Common Table Expression column name length restriction???
View 2 Replies View RelatedI have a SQL Query issue you can find in SQL Fiddle
SQL FIDDLE for Demo
My query was like this
For Insert
Insert into Employee values('aa', 'T', 'qqq')
Insert into Employee values('aa' , 'F' , 'qqq')
Insert into Employee values('bb', 'F' , 'eee')
Insert into Employee values('cc' , 'T' , 'rrr')
Insert into Employee values('cc' , 'pp' , 'aaa')
Insert into Employee values('cc' , 'Zz' , 'bab')
Insert into Employee values('cc' , 'ZZ' , 'bac')
For select
select col1,MAX(col2) as Col2,Max(Col3) as Col3
from Employee
group by Col1
I supposed to get last row as
cc Zz bab
Instead I am getting
cc Zz rrr
which is wrong
#EMAIL_ADDRESSES which hold records similar to the following (CREATE code below):
View 6 Replies View RelatedIs there a way we can get Table and Column name in separate column using PIVOT or something?Right now what i have is:
Text QueryPlan Plan_handle
Name Value
select id,name,Address from person <showPlznXML... 010101 Table Person
select id,name,Address from person <showPlznXML... 010101 column id
select id,name,Address from person <showPlznXML... 010101 Table Person
[code]....