Transact SQL :: Pull First And Last Transaction
Nov 5, 2015
I have a table that i'm trying to pull the first transaction and last transaction per prodid. The first transaction, the ctrid should be 'TOPPEntry'.
sample raw data result
prodid--------lineid------itemid---------ctrid----------createddate--
=================================================================
TOP02296228--Line15-----TTC3071-IR------TOPPEntry------2015-01-03 07:45:31.000--input
TOP02296228--Line15-----TTC3071-IR------TOPCBFG--------2015-01-07 16:18:26.000--fg--done processing
TOP02296229--Line15-----TTC3071-IR------TOPPEntry------2015-01-04 07:45:31.000--input
TOP02296229--Line15-----TTC3071-IR------TOPLens--------2015-01-05 12:12:31.000--wip--wip means still in process
TOP02296230--Line15-----TTC3071-IR------TOPPEntry------2015-01-05 08:45:31.000--input
TOP02296230--Line15-----TTC3071-IR------TOPCBSCP-------2015-01-06 14:18:42.000--scrap--done processing
[code]...
View 12 Replies
ADVERTISEMENT
Feb 8, 2007
I'm trying to initialize a subscriber from a backup for a pull subscription. The publisher was started before the full backup was made. I followed the instructions @ Books Online topic "Initializing a Transactional Subscription Without a Snapshot" http://msdn2.microsoft.com/en-us/library/ms151705.aspx and How to: Initialize a Transactional Subscriber from a Backup (Replication Transact-SQL Programming) http://msdn2.microsoft.com/it-it/library/ms147834.aspx . I initialized the subscriber by restoring the db before I run the create subscriber scripts. All agents run successfully except for the following:
The network setup is that the publisher and the subscriber are in 2 different domains with the distribution database at the publisher. The subscriber agent is able to connect and run however the error on the subscriber side is:
"Agent message code 14080. The remote server "subscriber" does not exist, or has not been designated as a valid Publisher, or you may not have permission to see available Publishers."
The warning on the publisher side is in the Replication Monitor where in the status it says Uninitialized Subscription.
Any ideas on why it says it isn't initialized? Is there a StoredProc that I have to execute to initialize from backup?
View 5 Replies
View Related
Oct 3, 2007
I created transactional replication on a database and setup pull subscriptions on each subscriber to run at a scheduled time once a day. The scheduled start time on each subscriber can differ. The transaction log on the publishing database will eventually consume all possible disk space. Is it possible (and safe) to shrink or truncate the transaction log file for the publishing database before all the subscribers completed running its daily pull subscription? If not, how can I manage disk space for the transaction log on the publishing database and ensure all transaction are replicated to the subscriber?
Thanks in advance.
View 1 Replies
View Related
Apr 21, 2015
I have two tables and I am trying to pull a value closest to another date. There could be instances where the Eval_date in TableA matches the date in TableB so how would that be handled?
TableA
PA_IDEval_Date
12015-01-08 00:00:00.000
22015-01-25 00:00:00.000
TableB
IDPA_IDDate Stat
112015-01-15 00:00:00.000 14
222015-01-28 00:00:00.000 8
312015-01-16 00:00:00.000 2
422015-01-029 00:00:00.000 3
512015-01-09 00:00:00.000 11
612015-03-14 00:00:00.000 14
Expected Results
PA_IDDate Stat
12015-01-09 00:00:00.000 11
22015-01-28 00:00:00.000 8
View 8 Replies
View Related
Jun 10, 2015
I need to pull dates from a DB2 database via TSQL (Linked server - IBM DB2 for i IBMDASQL OLE DB Provider) and compare it to today for a less than or greater than type comparison.
Database: DB2, Customer information housed here
Columns:
UTOFMM - Month (2 character, numeric)
UTOFDD - Day (2 character, numeric)
UTOFYY - Year (2 character, numeric. Problem: years from 2000 to 2009 are stored as 0, 1, 2, ... etc)
UTOFCV - Century Value (2 char, numeric. 0 = before 2000, 1 = in or after 2000)
I need to concatenate the date to be "sql" friendly, and then compare to today's date. It's to find any customer with date values in the fields above, and then differentiate between dates before today and after today.Here is the snippet of what I'm trying to fix. This portion of a nightly job is just checking for <u>any</u> value in the UTOFMM column of the current record.
Add Customer ID
Update [responder].[Temp_RX_CUSTOMERS]
set CustomerID = lf.UTCSID
from [responder].[Temp_RX_CUSTOMERS] LEFT Outer Join
[HTEDTA].[THOR].[HTEDTA].UT210AP lf ON [responder].[Temp_RX_CUSTOMERS].LocationID = lf.UTLCID
where lf.UTOFMM = 0
GO
View 4 Replies
View Related
Aug 7, 2015
I'm trying to pull all records from one table and just a single record from another. I have this join, (see below). It works ok, but the problem is if a blog record doesn't have a corresponding image record it doesn't return. The end result should be the blog record and a single corresponding image record. But always a blog record.
SELECT
[Blogs].[ID],
[Blogs].[BlogTitle],
[Blogs].[BlogType],
[Blogs].[BlogText],
[code]...
View 6 Replies
View Related
Sep 14, 2015
I have 3 tables.
Table 1:
ID Name Description
1 ABc xyz
2 ABC XYZ
Table 2:
RoleID Role
1 Admin
2 QA
Table 3:
ID RoleID Time
1 1 09:14
2 1 09:15
1 2 09:16
Now I want all the records which belongs to RoleID 1 but if same ID is belongs to RoleID 2 than i don't want that ID.From above tables ID 1 belongs to RoleID 1 and 2 so i don't want ID 1.
View 4 Replies
View Related
Jun 16, 2015
I am looking to pull all records for current & previous calendar year in one query. I know how to pull the current calendar year, but how would I pull current & previous?
select id, list_date
from tableA
where list_date > DATEADD(year,-1,GETDATE())
View 5 Replies
View Related
Apr 25, 2007
Hi all,
I have following problem:
I'm developing a Windows Mobile application, which is using RDA Pull for retrieving data from SQL Server 2005 database to PDA. Please, see the example:
Code Snippet
using (SqlCeEngine engine = new SqlCeEngine(connStr))
{
engine.CreateDatabase();
}
serverConnStr="Provider=SQLOLEDB;Data Source=.;User ID=sa;Initial Catalog=Demo;Password=xxx";
using (SqlCeRemoteDataAccess rda = new SqlCeRemoteDataAccess(
Configuration.Default.SyncServerAddress, "", "", connStr))
{
rda.Pull("MyTable", "SELECT * FROM mytable", serverConnStr, RdaTrackOption.TrackingOffWithIndexes, "ErrorTable");
}
Everythink works fine, when I use 'sa' user account in serverConnStr.
But, when I change conn string to:
"Provider=SQLOLEDB;Data Source=.;User ID=test;Initial Catalog=Demo;Password=test"
the sqlcesa30.dll cannot connect to SQL Server database.
In the sqlcesa30.log then I found following line:
Code Snippet
2007/04/17 10:43:31 Thread=1EE30 RSCB=16 Command=PULL Hr=80040E4D Login failed for user 'test'. 18456
The user 'test' is member of db_owner, db_datareader and public roles for the Demo database and in SQL Server Management Studio I'm able to login to the Demo database with using the 'test' users credentials and I'm able to run the select command on 'mytable'.
So, what's wrong? Why the sqlcesa30.dll process cannot login to the Demo database, and from another application with using the SAME connection string it works?
Please help.
Thank you.
Fipil.
View 10 Replies
View Related
Jun 4, 2015
Is it possible to take any type of backup during transaction or we can say in b/w the transaction?
View 9 Replies
View Related
Nov 23, 2015
select TOP 10 rec_id,trans_id,number_id,card_no,message_id,trans_datetimefrom [dbo].[trans_log]
order by trans_datetime desc101, 1,34343, 99999, 200, 2015-11-23 12:27:25.710101,2,34343,99999,210,2015-11-23
12:27:26.710102,3,43434,88888,200,2015-11-23 12:28:26.714102,4,43434,88888,233,2015-11-23 12:28:27.710expected result:34343,99999,datediff(ss,'2015-11-23 12:27:26.710','2015-11-23 12:27:25.710') --difference between row 2 and row 143434,88888,datediff(ss,'2015-11-23 12:28:26.714','2015-11-23 12:28:27.710') --
difference between row 4 and row 3difference between row 6 and row 5...In the above query, I always want to find the difference in transaction date time between second and first row in a moving window.I have the unique id as rec_id to compare the next row with the previous row.
View 3 Replies
View Related
Nov 4, 2015
My data is in 4 columns and multiple rows, like this
PartNo Quantity TransactionType TransactionDate
aaa 25 Incoming 2015-03-01
aaa 25 Incoming 2015-03-01
aaa 50 Transfer 2015-03-02
bbb 30 Incoming 2015-03-03
bbb 30 Transfer 2015-03-03
ccc 50 Incoming 2015-05-15
ccc 75 Incoming 2015-05-20
ccc 50 Transfer 2015-05-18
ccc 75 Transfer 2015-05-21
What I need to achieve is sum the quantities for a given transaction type, group it by Part Number and add an additional column where the Transaction Date for Transfer Type rows would become the Transfer Date. Each part would have one row. The resulting data would look like this.
PartNo Quantity IncomingDate TransferDate
aaa 50 2015-03-01 2015-03-02
bbb 30 2015-03-03 2015-03-03
ccc 125 2015-05-15 2015-05-21
How to achieve this goal.
View 5 Replies
View Related
Oct 22, 2015
I have heard about fn_dblog() function, Is it possible to find a transaction in a backup using fn_dblog() function?
View 3 Replies
View Related
Apr 20, 2015
Im working on Partition purge process, where I need to specify following statement:
SET @cmd = 'ALTER PARTITION FUNCTION ' + @function_name + '() MERGE RANGE (@range)'
EXEC (@cmd);
SET @cmd1 = 'ALTER DATABASE '+ db_name()+ ' REMOVE FILE ' + @partition_file
EXEC (cmd1);
I want to put this statement in Begin Tran /Commit statement but getting error that it is not allowed. "ALTER DATABASE statement not allowed within multi-statement transaction"..what are my options to rollback in case there is a failure.
View 4 Replies
View Related
Jul 22, 2015
I have a transaction number in my mapping table. I have a matching transaction number in my PDHist table. Sometimes I have matching transaction numbers in my PD table, but not always. This is causing no records to be returned. I have a One to Many relationship between my mapping table and both PD and PDHist.
Also, I need to check for nulls in my foreign exchange table.I can’t post the SQL because this is a classified project. However, it should be something like this, I think.
IIf(IsNull([Redem]![FX Rate]),([PDHist]![Remaining Balance]+[PD]![Closing Balance(TC)]).
The addition isn’t working. I think with a small push I can get this straightened out.
View 6 Replies
View Related
May 18, 2015
I have one SP in which I am opening transaction and on fail I am rolling back transaction.
Is there any way I can preserve data in temp table before failing record.
I means to say At record no 21 get failed I need to see 20 records in any temp tables.
View 11 Replies
View Related
Nov 12, 2015
I am working with SQL 2012 Express and I have a table with all transactions of invoices and payments for each customer. I am looking to find the last transaction detail of either two particular types of transactions (but not both) for each customer. So far I have tried various combinations around
SELECT MAX([sbt::dte]) OVER (PARTITION BY [sbt::code]) AS LastPayment, [sbt::folio], [sbt::typ], [sbt::net]
FROM dbo.tblSalbatTxn
WHERE ([sbt::typ] = 13 OR [sbt::typ] = 17)
Then there are some cases where customers have made more than the one of the same transaction type on that same last day which I would then like to sum the net value for that day of that transaction type.
I have also worked around this but it filtered the transaction type after it found the last transaction for each customer irrespective of it's transaction type.
SELECT TOP (100) PERCENT a.[cl::code], a.[cl::alpha], b.[sbt::folio], b.[sbt::typ]
FROM dbo.tblSalAccounts AS a INNER JOIN
dbo.tblSalbatTxn AS b ON a.[cl::code] = b.[sbt::code]
WHERE (b.[sbt::dte] =
(SELECT MAX([sbt::dte]) AS Expr1
FROM dbo.tblSalbatTxn
WHERE (b.[sbt::typ] = 11 OR
b.[sbt::typ] = 17) AND ([sbt::code] = b.[sbt::code])))
View 8 Replies
View Related
Aug 4, 2015
I built the following query to add the position of a record based on a certain date of the transaction of a customer:
select
CustomerID
, Product
, purchasedate
[code]....
View 6 Replies
View Related
Aug 11, 2015
I am new to T-SQL programming. I need to write a main procedures to execute multiple transactions. How could I structure the program so that each transaction will not abort if failed. Instead, the next transaction will keep running. At the very end the procedure will output the error and report them back to the main program in the output parameters. Looking for pseudo code.
View 6 Replies
View Related
May 20, 2015
I need to group by transactions at line item level. As the each item in the transaction may belong to different category and I'musing case statement to identify particular category for one column , I'm using sub-query to retrieve the results at item level.
Here is the code:
SELECT
fs.TransactionId
,fs.DateKey
,dc.FirstName
,dc.LastName
,dc.Company
[code]....
Due to case by statement and having multiple category I have to use multiple group by.
select TransactionId
,DateKey
,FirstName
,LastName
,Company
,City
,Sum(CategoryAPurchase) CategoryAPurchase
[code]....
View 5 Replies
View Related
Sep 16, 2015
We have a required to run multiple procedures in Single Go . And Error Occurred in any Procedure the it will rollback all the changes( Either all Proc run or None)
DECLARE @StartTime DATETIME=getdate(), @EndTime DATETIME=getdate()-1 , @Message VARCHAR(400)
BEGIN TRY
SET XACT_ABORT ON
BEGIN TRANSACTION
EXEC PROC1 @StartTime,@EndTime,@Message OUTPUT --[ Error Handling done here]
EXEC PROC2 @StartTime,@EndTime,@Message OUTPUT --[ Error Handling done here]
[Code] ....
Problem Statement is its not capturing the Error Message from Either Proc1 or Proc 2., its Capturing the Flat Message (The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction). How do i capture the Error Occurred in Proc 1 or Proc 2 into Log Tables.
View 7 Replies
View Related
Jun 11, 2015
I have a transaction table to store all the transaction happened on a single day. as per my requirement I wrote the query like this select Currency Code,TransactionCode,TransactionAmount,COUNT(TransactionCode) as [No. Of Trans] from TransactionDetails where TransactionCode in ('BNT' ,'BCN','BTC','STC','SCN','SNT') group by TransactionCode,CurrencyCode,TransactionAmount order by CurrencyCode..I got the result like this
My I want to show this result like this
ARS
BNT 0 0
BCN 0 0
SCN 1 12
BTC 0 0
STC 0 0
SNT 0 0
[code]...
and so on for all the the currency lists.how can I achieve like this .
View 6 Replies
View Related
Oct 18, 2015
I want to append the column to the transaction table(60 million records in it.) ..
Our transaction table is being used in production.. but i have very less amount of time ..
Instead of alter table.. (IF we use the alter to take backup of table and do the processing it will take more time). Is there any way to append the column to the transaction table ..
View 8 Replies
View Related
Jul 10, 2015
I have this sql stored procedure in SQL Server 2012:
ALTER PROCEDURE [dbo].[CreateBatchAndSaveExternalCodes]
@newBatches as dbo.CreateBatchList READONLY
, @productId int
, @cLevelRatio int
, @nLevelRatio int
AS
set nocount on;
[Code] ....
View 4 Replies
View Related
Jul 17, 2015
I'm trying to create a report which would give the latest transaction on a database, which all sit on different servers. I wanted to know if there is an a simple way tracking the latest transactions instead of getting the information from the database tables.
View 3 Replies
View Related
Nov 30, 2015
We have a service that inserts some rows into a parent table (P) and child table (C). This operation is atomic and performed within a transaction.
We also have a service that queries these tables such that rows are (should only be) returned from P where there are no children for that parent.
The SQL that performs this is simplified below:
SELECT P.SomeCol
FROM P
LEFT OUTER JOIN C ON P.PKofP_Value = C.PkofP_Value
WHERE
C.PkofPValue IS NULL
AND P.SomeOtherCol=0
Our expectation is that the query service should only return rows from P where there are no rows in C.
However, this seems not to be the case, and occasionally we find that rows from P are returned where there are matching rows in C.
We are sure that the process that inserts rows into P and C does so within a single transaction.
We have traced this with SQLTrace and can see the txn stag and committing and all operations using the same transactionid within the transaction.
We are running the default isolation level committed.
In SQLTrace we can see the query process start, the inserter process start and complete and then the query process continue (after presumably being blocked).
So how can the query process "miss" the child rows and return the parent from the above query?
Is it possible that, in this isolation level, the inserter process can block the query process such that when the inserter process commits and when the query process continues it does not see the child rows inserted because they were inserted in the table/index "behind" where the query process has already read - some kind of phantom phenomenon?
View 3 Replies
View Related
Oct 5, 2015
In t-sql 2012, I have the following sql that I would like the following to occur:
1. commit or rollback a transaction based upon the results of a calculation listed below,
2. I would like to have a message appear if the commit was successful or the rollback needed to occur. I basically want a way to be able to tell from messages if a rollback occurred or a commit happened.
DECLARE @TransactionName varchar(20) = 'Transaction1';
@STARTLOCKERCNT INT = 0, @LOCKDIFCNT INT = 0, @ENDLOCKERCNT INT = 0
DECLARE @lockmap TABLE (lockID int NOT NULL PRIMARY KEY,
schoolID int NOT NULL,
UNIQUE(schoolID,lockID)
)
[Code] ....
Thus can you modify the sql I just listed above so that I meet the goals that I just listed above?
View 5 Replies
View Related
Sep 18, 2015
I am getting an error about "Cannot perform a shrinkfile operation inside a user transaction", but I don't have a shrinkfile command in my procedure. Does SQL hang on to that command if it was received earlier in a different procedure?
View 5 Replies
View Related
Aug 19, 2015
I am getting an exception. And i don't know whether this exception is from the C# coding or SQL SERVER."Cannot roll back InsertRxs. No transaction or savepoint of that name was found.Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1.A transaction that was started in a MARS batch is still active at the end of the batch. The transaction is rolled back."
View 2 Replies
View Related
May 31, 2008
Hi All
I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.
If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.
I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.
set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN
It's got me stumped, so any ideas gratefully received.Thx
View 1 Replies
View Related
Feb 22, 2007
I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.
for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.
I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.
if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
and
Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.
Please help me it's very urgent.
View 3 Replies
View Related
Feb 6, 2007
I am getting this error :Distributed transaction completed. Either enlist this session in a new
transaction or the NULL transaction. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: Distributed transaction completed. Either
enlist this session in a new transaction or the NULL transaction.have anybody idea?!
View 1 Replies
View Related
Dec 22, 2006
i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.
Message is like this:
Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
View 8 Replies
View Related
