Transact SQL :: Query Based On Date - Get Data From Table Above WHERE DateofBirth Is Tomorrow
Oct 30, 2015
Lets say I have a table, tblPersons
FirstName | LastName | DateofBirth
----------------------------------------
Thomas | Alva Edison | 10-10-2015
Benjamin | Franklin | 10-10-2015
Thomas | More | 11-10-2015
Thomas | Jefferson | 12-10-2015
Suppose today's date is 09-10-2015 in (dd-MM-yyyy format), I want to perform a query in such a way that I should get the data from the table above WHERE DateofBirth is tomorrow, so I could get the following result.
FirstName | LastName | DateofBirth
----------------------------------------
Thomas | Alva Edison | 10-10-2015
Benjamin | Franklin | 10-10-2015
View 15 Replies
ADVERTISEMENT
Dec 2, 2015
I would like to update the flag of the promotion ID should the promotion ID date range overlap with Promotion ID(All) Date Range. The general logic is as below.
Update TableName
SET PromotionID Flag = 1 AND Reason = 'Overlap with row ID(Overlap row ID number)'
Where EACH ROW(Except with Promotion ID ALL) Date Range Overlap with ROW(with promotion ID ALL) Date range
Note: ROW is Partition By ColumnA,ColumnB
TableName: PromotionList
ID PromotionID StartDate EndDate ColumnA ColumnB Flag Reason
1 1 2015-04-05 2015-05-28 NULL NULL 0 NULL
2 1 2015-04-05 2015-04-23 2 3 0 NULL
3 2 2015-05-04 2015-07-07 2 3 0 NULL
4 ALL 2015-04-05 2015-04-28 NULL NULL 0 NULL
5 ALL 2015-07-06 2015-07-10 2 3 0 NULL
6 1 2015-02-03 2015-03-03 NULL NULL 0 NULL
Expected outcome after performing update on the table
ID PromotionID StartDate EndDate ColumnA ColumnB Flag Reason
1 1 2015-04-05 2015-05-28 NULL NULL 1 Overlap with row ID 4
2 1 2015-04-05 2015-04-23 2 3 0 NULL
3 2 2015-05-04 2015-07-07 2 3 Overlap with row ID 5
4 ALL 2015-04-05 2015-04-28 NULL NULL 0 NULL
5 ALL 2015-07-06 2015-07-10 2 3 0 NULL
6 1 2015-02-03 2015-03-03 NULL NULL 0 NULL
View 4 Replies
View Related
Jun 18, 2015
I simply need to list the most recent value for each employee here... the value at each person's maximum date
Sample Detail Data:
EmpID Date Value
1 1/1/14 27
1 2/12/15 333
2 5/5/15 255
3 5/4/15 110
3 1/1/13 67
3 3/2/14 80
[Code] ....
What is the most efficient way to display the most recent value for each employee ID via MS SQL.?
View 4 Replies
View Related
May 21, 2015
I have a data structure like this
UID , Name, amount, start date End Date
1 A 10 2015-05-01 00:00:00 2015-05-01 23:59:59
2 A 10 2015-05-02 00:00:00 2015-05-02 23:59:59
3 A 10 2015-05-03 00:00:00 2015-05-03 23:59:59
4 A 10 2015-05-04 00:00:00 2015-05-04 23:59:59
5 B 10 2015-05-05 00:00:00 2015-05-05 23:59:59
[code]...
View 5 Replies
View Related
Apr 21, 2015
In the below scenario we are inserting some time related fields in Temp table.But its data type is varchar. Once data loading is finished in the temp table (Data is loading by source team SQOOP and they are unable to load if the source datatype is having Date or datetime) we have to alter the column datatypes. somehow, some character data in inserted in date columns (look at into 3rd insert statement). while altering the table it is failing. Can we do any alternative for this (Means if any varchar data that is non convertible to date can we make as null)
INSERT INTO ##TEMP_TEST
SELECT '2014-09-30','2017-10-06','Nov 6 2014 6:11AM','Nov 6 2014 6:11AM'
UNION SELECT '2014-09-29','2017-10-06','Nov 6 2014 6:11AM','Nov 6 2014 6:11AM'
UNION SELECT '2014-09-28','2017-10-06','Nov 6 2014 6:11AM','Nov 6 2014 6:11AM'
GO
INSERT INTO ##TEMP_TEST SELECT NULL,NULL,NULL,NULL
[Code] ....
View 6 Replies
View Related
Aug 21, 2000
Hi all,
Really appreciate any insight into this as I'm out of ideas
My developers want to include an and clause like:
and dr_ready_dt <= '2000-08-22 10:00.000am'
easy, except they want the date as a variable(always 10am tomorrow)
Thanks!
Pete Karhatsu
View 3 Replies
View Related
Nov 13, 2014
I have table called AbsData with one field called Servicedate which is Datetime filed.. like date is stored as 2014-11-12 10:03:00.000 etc..
When I trying to retrieve data from that table using below query I am not getting any data
select * from AbsData where Servicedate = '2014-11-12'
Even I used
select * from AbsData where Servicedate = 2014-11-12 00:00:00.000'
select * from AbsData where Servicedate = 2014-11-12 00:00:00'
none of this query is worked..
How to get all the data from table where date is equal to 11/12/2014
View 1 Replies
View Related
Aug 16, 2006
Hi,
I use MS certificate server to request/make server certs but the "not before", or start date is tomorrow for a 1 year cert. I dont care how long but I want the cert to start immediately (today).
Regards,
Simon.
View 7 Replies
View Related
Jul 28, 2014
I need to get previous month data in the table based on current date.
In case of execution of each month, the data for previous month should come with date as between
create table TestDate
(Sno Int,
Name varchar(100),
DateofJoin datetime)
insert into TestDate values (1,'Raj', '2/21/2014')
insert into TestDate values (1,'Britto', '6/12/2014')
insert into TestDate values (1,'Kumar', '5/14/2014')
insert into TestDate values (1,'Selva', '6/27/2014')
insert into TestDate values (1,'Ravi', '5/2/2014')
insert into TestDate values (1,'Gopu', '6/2/2014')
/*
if I execute in month July ( ie: today)
select * from TestDate where dateofjoin between 1-june-2014 and 30-june-2014
Result
5 Ravi 2014-05-02 00:00:00.000
3 Kumar 2014-05-14 00:00:00.000
if I execute in month June
select * from TestDate where dateofjoin between 1-may-2014 and 30-may-2014
Result
6Gopu2014-06-02 00:00:00.000
2Britto2014-06-12 00:00:00.000
4Selva2014-06-27 00:00:00.000
/*
View 1 Replies
View Related
Aug 29, 2015
create table mst_reg
(id int not null identity(1,1),
Name varchar(80),
Lastname varchar(80),
Fathername varchar(80),
Qualifiaction varchar(80),
Emailid varchar(80),
Phno int
)
insert into mst_reg values('aqib','javid','nijamudeen','BTechIT','aqib55@live.com',965557017796)
While executing the query to insert the data ito the table it shows
"Msg 8115, Level 16, State 2, Line 1
Arithmetic overflow error converting expression to data type int.
The statement has been terminated."
View 2 Replies
View Related
Jun 18, 2015
I have conducted a thorough search in the forums and cannot quite find my answer. I have a date field called open_date. If the open_date is more than 30 days old, I need to count it. I have started with the following code:
SELECT 'Older_Than_30Days' =
CASE
WHEN open.date >= 30 THEN '1'
ELSE '0"
END
My problem is the WHEN.
View 6 Replies
View Related
Jun 3, 2015
I have a simple following table which is having only one date column.
CREATE TABLE TEST_DATE
(
InputDate DATE
)
GO
INSERT INTO TEST_DATE VALUES('01-01-2015')
INSERT INTO TEST_DATE VALUES('06-25-2015')
INSERT INTO TEST_DATE VALUES('11-23-2014')
GO
SELECT * FROM TEST_DATE;
And the expected out put would be as follows:
I want to derive a Four Quarter End Date based on Date selected.
For Example if i select 01-01-2015 then
First Quarter End Date would be Previous Quarter End Date
Second Quarter End Date would be Current Quarter End Date
Third Quarter End Date would be Next Quarter End Date
Fourth Quarter End Date would be Next +1 Quarter End Date Like that
View 9 Replies
View Related
Aug 4, 2015
I built the following query to add the position of a record based on a certain date of the transaction of a customer:
select
CustomerID
, Product
, purchasedate
[code]....
View 6 Replies
View Related
Jul 28, 2015
I have a requirement where i want to delete the records based on the Date column. I have table which contain the columns like machinename ,lasthardwarescandate
I want to delete the records based on the max(Lasthardwarescandate) i.e. latest one, column where the machine name is duplicate menace it repeats. So how would i remove the duplicate machine names based on the Lasthardwarescandate column(There are multiple entries for the Lasthardwarescandate so i want to fetch the latest date column).
Note: Duplication should be removed based on “Last Hardware Scan” date.
Only latest date should be considered from multiple records for the same system. "
View 4 Replies
View Related
Jul 2, 2015
I have a scenario to fetch records for each ID on 2 conditions. There are 2 types of Product type for each ID. PFE and PRI. I need only latest active PFE and at the same time all the latest PRI should be closed. (meaning, only PFE should be in Active status currently)
1.) Latest Product type PFE should be A (active) status for the particular ID
2.) At the same time ALL the latest PRI should be C(closed) status for the same ID
I have give example with 3 scenarios and desired output
1.) For ID 101, Latest PFE is active and all latest PRI is closed ----> Should come in result
2.) For ID 102, Latest PFE is Closed and all latest PRI is closed ---->Should NOT come in result
View 5 Replies
View Related
Sep 2, 2015
Below is the SQL Query i am currently having
SELECT IG_FinancialTransactionSummary.ClaimNum,IG_FinancialTransactionSummary.TransactionCode,
IG_FinancialTransactionSummary.TransactionDate,IG_FinancialTransactionSummary.Username,
FinancialTransactionSummaryTest.ClaimNum,FinancialTransactionSummaryTest.TransactionAmount,
FinancialTransactionSummaryTest.UserName--,FinancialTransactionSummaryTest.TransactionDate
[Code] ....
And here is the result dataset
ClaimNumTransactionDateUsername ClaimNum TransactionAmountUserName
2000074 20150209jerry.witt 2000074 -10000DATAFIX INSERTED ON 20150626 AT 162152493 LOCAL
2000074 20150626DATAFIX INSERTED ON 20150626 AT 162152493 LOCAL 2000074 -10000DATAFIX INSERTED ON 20150626 AT 162152493 LOCAL
[Code] .....
So,if we look at the result set, we notice 2 conditions where the IG_FinancialTransactionSummary.Username is like 'Data' and if we see the transaction date then sometimes that is the max transaction date or sometimes there are transactions that happened after but that doesn't have like '%data%' in username . So, i need to add a new column to my sql query which should basically verify if the username is like '%data%' and if that is the max(transaction date) or even if there are any transactions after that doesn't have like '%data%' then YES else No.
View 13 Replies
View Related
Sep 17, 2015
I have been tasked with writing an update query to update a table with more than 150 million rows of data. Here are the table structures:
Source Tables :
OC
CREATE TABLE [dbo].[OC](
[OC] [nvarchar](255) NULL,
[DATE DEBUT] [date] NULL,
[DATE FIN] [date] NULL,
[Code Article] [nvarchar](255) NULL,
[INSERTION] [nvarchar](255) NULL,
[Code] ....
The update requirement is as follows:
DECLARE @Counter INT=0 --This causes the @@rowcount to be > 0
while @@rowcount>0
BEGIN
SET rowcount 10000
update r
set Comp=t.Comp
[Code] ....
The update took more than 48h and didn't terminate , how to accelerate it ?
View 6 Replies
View Related
Sep 29, 2015
how to write a query to get current date or end of month date if we pass year and month as input
Eg: if today date is 2015-09-29
if we pass year =2015 and month=09 then we have to get 2015-09-29
if we pass year =2015 and month=08 then we have to get 2015-08-31(for previous months we have to get EOMonth date & for current month we have to get current date).
View 3 Replies
View Related
Nov 17, 2015
I have a daily record table (has field Date1, field2Update) and have another table(has field Date2, Flag (value: 0 and non 0 values)
I want to update table1 and set field2Update as somevalue where table2.Flag <> 0
View 4 Replies
View Related
Aug 31, 2015
So my data column [EODPosting].[MatchDate] is defined as a DATE column. I am trying to SELECT from my table where [EODPosting].[MatchDate] is today's date.
SELECT*
FROM[dbo].[EODPosting]
WHERE[EODPosting].[MatchDate]=GETDATE()
Is this not working because GETDATE() is like a timestamp format? How can I get this to work to return those rows where [EODPosting].[MatchDate] is equal to today's date?
View 2 Replies
View Related
Aug 3, 2015
I'm trying to return a query based on the dateadd function. I have a column in the database called date_added which is am successfully using the the DATEADD function above as date1. The Var1 variable I need to populate from the database too from a column called life_span which is an int data type. The error I get is An expression of non-boolean type specified in context where a condition is expected near select
My query is as follows: select guid, dateadd(day,life_span,date_added) as datepayday. From User_table
View 5 Replies
View Related
Sep 7, 2015
I have table A with colums ID and Product. I have table B with ID (same as table A) and revenue of product.
I need to update the field Product of table A with the revenue of table B.
I'm confuse with the update joining both tables. I tried this, but obviously has an error:
Update A set Product=B.Revenue where A.ID=B.ID
View 6 Replies
View Related
Jan 18, 2008
A happy belated New Year to all!
Can someone please help me with the following. How do I, in SS 2000, use a value to label a column?
example
Col A Col B Col C Col D
CA '12/1/07' '11/1/07' '10/1/07'
I want to use the month and year of the date to rename the column.
Col A 12-2007 11-2007 10-2007
CA '12/1/07' '11/1/07' '10/1/07'
Thank you in advance for any help you can offer.
TMendez
View 5 Replies
View Related
Jun 4, 2015
I have a table "PrintArea" with below table structure.
The Details column have " " separated data.
CREATE TABLE [dbo].[PrintArea](
[ID] [int] IDENTITY(1,1) NOT NULL,
[AccessDate] [datetime] NULL,
[IPAddress] [varchar](16) NULL,
[SerialNum] [varchar](256) NULL,
[Description] [varchar](256) NULL,
[Details] [varchar](2048) NULL,
)
This is how the data lookis like.
INSERT [dbo].[PrintArea] ([ID], [AccessDate], [IPAddress], [SerialNum], [Description], [Details]) VALUES (104280, CAST(0x0000A28A00A88310 AS DateTime), N'70.89.39.161', N'InSign-f529c824-85a6-4a64-8c59-e9f786d718f3-YM2AS31367,BFEBFBFF000306A9', N'Printing', N'Headboard_Insert_4
1
1
7938
5579
[Code] ...
I want to calculate totalAreaPrinted based on below formula from Details column.
View 2 Replies
View Related
Oct 12, 2015
I've been able to get this select query to work, but I'm not sure how to modify it to turn it into a DELETE query:
USE QSCTestENG
select p.[testid], COUNT(c.[testid])
FROM [dbo].[tblTestHeader] p
left outer join [dbo].[tblTestMeasurements] c ON p.[testid]=c.[testid]
where p.[model] = 'XPPowerCLC125US12'
group by p.[testid]
having COUNT(c.[testid]) <>48;
View 2 Replies
View Related
Sep 1, 2015
I have the following report I need to create with 2 parameters. An equal OR not equal. I need the report to have a drop down that has equal to '1024' or a drop down option that IS NOT equal to '1024'. I also need the WHERE clause to return the equal or not equal based on the user selection inside of SSRS.
SELECT user1 AS [Company], reference AS [PAI_REF], statenumber,
LEFT(user4, 7) AS [Supplier Code],
user4 AS [Company Information],
user8 AS [Transaction Type], user2 AS[Invoice Number],
--CONVERT(VARCHAR,CONVERT(Date, user3, 103),101) AS [Invoice Date],
[routeName] AS [Route], username AS [User Name]
[Code] ....
View 2 Replies
View Related
Jul 9, 2015
I basically want to select all GRNID's from one table but they have to be between dates in another table.So I want all GRN's between two dates found in the ABSPeriodEndDate table. To find out the start date for the between clause I need to find the MAX Period then minus 1 and the max year. To find the end date of the between clause I want I need to find both the max period and year. But I want the DateStamp column to return the results for the between clause. My query is below:
SELECT tblGRNItem.GRNID
FROM tblGRNItem
INNER JOIN ABSPeriodEndDates ON tblGRNItem.DateCreated = ABSPeriodEndDates.DateStamp
WHERE tblGRNItem.DateCreated BETWEEN
(SELECT ABSPeriodEndDates.DateStamp FROM ABSPeriodEndDates WHERE ABSPeriodEndDates.DateStamp = (SELECT
[code]....
View 6 Replies
View Related
Nov 6, 2015
I have 2 tables A, B with 1 to many relationship
Table A(ProductID), TableB(ProductID, FileID)
I need to find only the records in Table A that may have more than one FileIDs in Table B, since some ProductIDS have multiple FileIDs in Table B...
View 8 Replies
View Related
Jul 26, 2015
I have the following 2 tables:
Table: classes Columns: classID, hp
Table: char_active Columns: name, classID, hp
The classes table is already populated.
What I want to do is insert a new row into char_active using the name and classID column, and have the HP column auto populate based on the corresponding value in the classes table. This is the trigger I wrote but I'm getting the error
Incorrect syntax near 'inserted'.
I'm new to sql, this is actually the first trigger I've tried writing.
create trigger new_hp on curr_chars.char_active
instead of insert
as
declare @hp tinyint
select @hp=lists.classes.hp from lists.classes where lists.classes.classID=inserted.classID
insert into curr_chars.char_active (name, classID, hp) inserted.name, inserted.classID, @hp
go
View 4 Replies
View Related
Oct 31, 2015
I have 5 different tables with same structure. Each table has an account column and another column count. I am trying to generate a report based of the columns in each table. Account is same in all tables with same account numbers but count will be different.
Eg:
Table 1 has Account Count
Table 2 has Account Count
Table 3 has Account Count
Table 4 has Account Count
Table 5 has Account Count
I want output as:
Account Count Account Count Account Count Account Count Account Count
View 4 Replies
View Related
Oct 27, 2015
I'm trying to Update a column table based on values from another table but I need these values are random.My query looks like this and doesn´t work
DECLARE @Rowini int,
DECLARE @lastrow int
SET @Rowini = 1
SET @Lastrow = 80000
[code]...
View 8 Replies
View Related
Sep 15, 2015
I have 3 columns. I would like to update a table based on job_cd and permit_nbr column. if we have same job_cd and permit_nbr, reference number should be same else it should take max(reference number) from the table +1 for all rows where reference_nbr column is null
job_cd permit_nbr reference_nbr
ABC1 990 100002
ABC1 990 100002
ABC1 991 100003
ABC1 992 100004
ABC1 993 100005
ABC2 880 100006
ABC2 881 100007
ABC2 881 100007
ABC2 882 100008
ABC2 882 100008
View 3 Replies
View Related
Aug 16, 2014
I need to get 3 rows per set based on a date given (must be this date) but I want the rows to be based on this date as...
1 ( row where the date from the date column is the next date after given date )
0 ( row where the date is the closest date prior to the date given )
-1 ( prior to the date at 0 )
And add a column with the relative number.
** The dates for the same name and item will never repeat.
For example, a set of rows...
Row ID, Name, Item, Number, Date
1 Andy, Item1, 12030, 2014-06-30
2 Andy, Item1, 62030, 2014-03-31
3 Andy, Item1, 30300, 2013-12-31
4 Andy, Item1, 40030, 2013-10-31
5 Andy, Item1, 50030, 2013-08-30
6 John, Item2, 50240, 2014-04-30
7 John, Item2, 41400, 2014-03-31
8 John, Item2, 40509, 2014-01-31
9 Andy, Item2, 24004, 2014-03-31
10 Andy, Item2, 20144, 2013-12-31
11 Andy, Item2, 20450, 2013-09-30
12 Andy, Item2, 25515, 2013-06-30
If I have 2014-03-15 as the date and search for 'Andy', I expect...
Row ID, Item, Date, Relative Date
2, Item1, 2014-03-31, 1
3, Item1, 2013-12-31, 0
4, Item1, 2013-10-31, -1
9, Item2, 2014-03-31, 1
10, Item2, 2013-12-31, 0
11, Item2, 2013-09-30, -1
This is what I'm using which I have no issues switching if necessary...
DATEDIFF( quarter, 2014-03-31, date )
date BETWEEN DATEADD( quarter, -1, '20140315' ) AND
DATEADD( day, 1 ( DATEADD ( quarter, 2, '20140315' ) )
which returns...
Row ID, Item, Date, Relative Date
2, Item1, 2014-06-30, 1
3, Item1, 2014-03-31, 0
4, Item1, 2013-12-31, -1
9, Item2, 2014-03-31, 0
10, Item2, 2013-12-31, -1
Not sure if date math is the best option here. Perhaps using row_number() in some way?
I'm trying to avoid having to process the entire table programmatically given the size of the data set.
View 8 Replies
View Related