Transact SQL :: Query Fails To Retrieve Full Dataset Using Datetime After Successful Execution Of SSIS Package?
Jun 16, 2015
I have an SSIS Package which Retreives Data using a  SQL Query like belowÂ
select  a.* from dbo.test a (nolock)
JOIN dbo.test1 b (nolock)
ON a.DetailsId = b.DetailsId
JOIN dbo.test c (nolock) on c.DetailsLineId = b.DetailsLineId
where convert(date,c.CpPlacedDate)>?
and convert(date,c.CpPlacedDate) Â < convert(date,GETDATE())Â
and c.PartnerCode in ('akakak07')
The CpPlacedDate DataType is Datetime. After the Successfull Execution of SSIS Package the final output results in destination is lesser than source. Â
The Maximum of cpplaceddate in the Destination for a particular date is '2015-06-13 23:46:08.923'
The Maximum of cpplaceddate in the Source for a particular date is '2015-06-13 23:59:14.873'Â
I have a dts package migrated from sql server 2000 to sql server 2005 clustered server using migration wizard without any problem.
I have created a new job on sql server 2005 and one of the steps involves executing the SSIS package. It keeps failing with the error message "package execution failed". I have logged in here as a domain administrator (as also a local administrator).
I have an SSIS ETL Package that runs perfectly in debugger.
It is saved to the local SQL Server using "rely on server security".
The SQL Server Agent job runs at night and the job fails right at the last step. It is actually loading the data, because I write a record with row counts to an audit table, and they are successfully incrementing.
The real issue to me is that it is failing randomly, sometimes it will run 7 times then fail once, others it will go 2 or 3 days then fail. The job runs at the same time every night, and takes within a minute or two variance.
I've looked at the logs, and done a trace, and I can't seem to find anything that would cause the failure. The closest thing to an error is a join parameter note in the trace that's on tthe MSDB database.
Not a lot to work with, I know... but does anybody have any advice for me? Thank you in advance!
when i run the job using network service account credentials job is failing. But when i run the package individually, it is tasting success. when it runs as job, this is the error message i am getting
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
I have changed to 32-Bit run time and ran the excel package, even then it is failing...i tried to use my credentials (i am admin on the box), even then it is failing...please suggest
I have created a simple SSIS package using BIDS which does data copy from SQL Server to a excel file
I'm able to execute it using dtexec command locally connecting to the remote db server.
We have a file shared server where we are keeping the dtsx files.
Our DB server is located on another server.
We have another file shared server where Tidal agent is installed and we have created a batch file which has the dtsexec command and this batch is kept here.
Now when I create a job and run it it gives us the following outputCode: 0xC0014019 Source: tidal_jobtest Description: The connection manager "dbserver.database.db_user" will not acquire a connection because the package OfflineMode property is TRUE. When the OfflineMode is TRUE, connections cannot be acquired. End Error Error: 2007-05-04 09:09:58.06 Code: 0xC020801C Source: Data Flow Task OLE DB Source [1] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "dbserver.database.db_user" failed with error code 0xC0014019. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error: 2007-05-04 09:09:58.06 Code: 0xC004701A Source: Data Flow Task DTS.Pipeline Description: component "OLE DB Source" (1) failed the pre-execute phase and returned error code 0xC020801C. End Error
I have checked the SSIS package properties and the offline mode property is set to false but still i get the same error.
Also Can anyone let me know how to check whether we are using 32bit or 64bit drivers in connection or for dtsexec command
I have an SSIS package authored in SSDT for VS 2013 that cancels itself immediately after validation completes and execution commences. This behavior occurs when executed either in VS 2013 or from within SQL Server. No error messages are thrown in either the debug window or the log output (log is capturing everything). The only thing that occurs differently on this package as compared to another package I am able to execute successfully is that a command line window briefly flashes when the package cancels itself—but it is gone so fast I cannot read it. The last several lines of the debug output are as follows:
----------------- Information: 0x40043006 at Merge Info, SSIS.Pipeline: Prepare for Execute phase is beginning. Information: 0x40043007 at Merge Info, SSIS.Pipeline: Pre-Execute phase is beginning. Information: 0x402090DC at Merge Info, All Users CSV [2]: The processing of file "C:...AllUsers.csv" has started. Information: 0x400490F4 at Merge Info, Lookup Org [47]: Lookup Org has cached 957 rows. Information: 0x400490F5 at Merge Info, Lookup Org [47]: Lookup Org has cached a total of 26719 rows.
[Code] ....
What circumstances an SSIS package would cancel itself without throwing any errors?
I got this Error, Query Execution for Dataset 'Source'.
When i try to run a report that is actually a drillthrough from another report. It runs fine in Report Designer, and when i deploy to my Local server. But when i deploy it to my virtual Report Server, I get this error messege. Why is it doing this? and where can i see errors for this type of stuff, so i can figure this out. This uses the same Datasource as the report linked from it. That report works fine, why wont this one? any ideas?
One of the step in sql agent job is to execute the SSIS package to copy files from remote shared location to local server where sql server is installed. The account on which SQL agent runs as has access to remote shared location. However SSIS package always fails with following error:
An error occurred with the following error message: "Access to the path '\sharedlocationBCKTST105092008.csv' is denied.".
We have tried using proxies but same issue come with proxy also. When using proxy, we created a proxy for a user who has access on that shared folder on Windows server(from which files are to be copied). If we login to SSIS server with the above user and execute SSIS package manually it works fine. However if we login with different user and run the job via SQL agent using proxy of the above user, then job fails throwing same above mentioned error
Scenarion: 1.- SSIS Package execute tasks on 2000 SQL Server Database 2.- Execution takes places using Business Intelligence Studio Question: 1.- How can I tracked that SQl 2000 tasks took place using a SSIS Package?
Which is the best way to execute SSIS packages? I have no problem to use dtexec command but I want it to run every night. Is this going to be done through the SQL Server (SQL Server Agent under Jobs)? Is the type going to be Operating System (CmdExec) or Transact Sql? How exactly is the command written there?
Hi all, I am Hazara. I am trying to call a SSIS package from a web service. But package.execute() method is returning 'failure'. Though I am able to execute the same package from a normal .Net project and it is working fine (using the same code that i have used in web service).
I have also tried to execute it through stored procedure for which firstly I created a .dll in c#(which is perfectly working) and then I registered this .dll in sqlserver-2005 using following command.
CREATE ASSEMBLY asmPackageExecuter FROM 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727PackageExecuter.dll' WITH PERMISSION_SET = UNSAFE GO Now on calling the method of .dll (which is responsible to execute the package) I am getting the DTSExecResult as 'success' but data is not getting transfered from one able to other as was expected from the package.
Please help me. I have searched it everywhere on net but didn't get any solution. I want to execute package only through web-service or stored-procedure
DECLARE @PN_INC INT, @POSITION_DESC VARCHAR(15) SELECT @PN_INC= MAX(PositionNumberInc) FROM dbo.tblPosition WHERE LTRIM(RTRIM(UPPER(PositionDescription)))=LTRIM(RTRIM(UPPER(@POSITION_DESC))); SELECT @PN_INC is returning null when there is no record in the table;
1. how can I make it return 0 when @PN_INC is null else it should pick the MAX(PositionNumberInc) value
2. I have written the below query to return 0 when @PN_INC is null but I need query to select the MAX(PositionNumberInc) value when @PN_INC is not nullÂ
SELECT @PN_INC= coalesce(MAX(PositionNumberInc), 0) FROM dbo.tblPosition WHERE LTRIM(RTRIM(UPPER(PositionDescription)))=LTRIM(RTRIM(UPPER(@POSITION_DESC)));
I need help from you. I am working on SSIS packages for ETL purpose. The version of SQL Server i am using is SQL Server 2005.
In Brief , the working of current ETL is as follows.
In ODS database i have 2 tables i.e Table_A & Table_B which gets loaded from another 2 staging tables A & B. And using this 2 tables data will be loaded into a target table i.e Trg_A.
The ETL packages are executed by stored procedures by creating a job within the stored procedure.
The loading of the trg table is little tricky. Before that loading of Table_A is implemented in a single SSIS package. and loading of Table_B is been implemented in another SSIS package.
In the trg table there are two columns which will be getting updated as and when each table is loaded. so for the first time if i run the package which is resposible for loading Table_A, it loads values into Table_A and once done it will updates (col1) in the target table.
Once after the complete of the execution of Package1. Now i will kick off the second ssis package which loads the data into Table_B and updates the trg table's columns (col2).
Now the actual problem what i am facing is:
For loading Table_A and updating the col1 in Trg table i will be receving more than 5 excel file every month on weekly basis. I cannot even gather all the files and run using a For-Loop counter. So presently i am loading data excel file per week .
Similarly loading of table_B.
For a week if i am executing both the packages which loads the Table_A and updates the Trg(col1) and Table_B and updates Trg(col2), then i am getting a Deadlock Error and the entire ETL is getting messed up.
Now my requirement is , Eventhough the 2 packages are run in parallel , there could certain milli seconds time difference while start of the execution in Job Monitor. I need to implement a Queing Mechanism which takes care of running the packages in a sequential manner rather than in parallel. i .e i need to ensure only one SSIS package is running in Job Monitor. Only after successful execution of either one the package, then only the second package should start its execution.
If we can implement such a queing mechanism , then my problem is solvedl.
I need some suggestions on this regard in implementing the Queing mechanism in a programatic approach using SQL Server Job Related MetaData Tables. or else is there in server parameter or initialization parameters which can be set at Database level which suffice my requirement.
Any suggestions would be greatly appreciated. Looking for sincere comments on this regards.
This not a problem but here i wan to give u my some trial on package execution from C# code.
i just want to make sure whether this is right way or not?
I need to upload some processed text file into table using SSIS packages. I m calling these packages in runtime for different source text files passed to it.
I first created package on my machine and deployed packages on Sql server using default protection level. So when i m tryng to execute it from integration services it wont work giving some exception in AquireConnectionCall() , its coz all the sensitive information is stroed inside package is not available to that machine.
In C#
Now i m loading this package using LoadFromSqlServer(). I am creating connection manager object for each of source and destination type and then setting all sensitve information from my solution's config file. Set the protection level of package and available connection managers to DontSaveSensitve.
by using this method m able to execute any package created on any machine with default protection level.
Can any one of tell me -ve aspects of this approach?
I am wondering something, once we've created a job that executes a package at a given time interval, does that package get recompiled each time the job spins up and executes the package? Or is the package compiled once and then that compiled code is executed each run after the first run?
What I'm seein is this; I have a package that reads data from flat text files and then dumps that data into the database. The package will take 3 minutes to execute when executing on a single file, but when it's looping through ~50 files, it will take ~30 minutes to execute, that is less than a minute per file. Why is this?
Hopefully I'm just forgetting something and not setting a checkbox or radio button somewhere. The job is set up as an SSIS job, not as a command line job.
Thanks in advance for any help you can give me.
Wayne E. Pfeffer Sr. Systems Analyst Hutchinson Technolgy Inc.
I am currently experiencing a 30 second delay when starting an SSIS package from a query window or stored procedure in SQL 2005 Management Studio, using xp_cmdshell and dtexec.
When I run the package in BI Dev the execution results state an elapsed time of 4.82 sec, at a command prompt using dtexec the elapsed time is 3.48 sec, from MStudio the elapsed time is 33.86 sec, this test was run using the same configuration and databases. For the MStudio run, if I look at the DTS log file I€™m creating or the PC Application log, it states the package doesn't actually start until 31 sec after the execute button is pressed. I€™ve tried executing the package as both a SQL package and a file package without any difference in elapsed times. I have also set DelayValidation = True for every Task, ConnectionManager and the package itself.
When I look at the package log one difference I see is that the Management Studio executes using €˜NT AUTHORITYSYSTEM€™, BI Dev and the cmd prompt use the local user €˜[Server]Administrator€™, which in this case is the administrator. From this I have to believe it is some kind of user rights problem. I think SQL or the OS is waiting for something and after it times out at 30 sec, it allows the package to run. If this is the case I€™m not sure what it might be or how to find it.
I also tried making an xp_cmdshell_proxy_account with admin rights but this didn€™t seem to work either. I€™ve included the query code below. Any ideas, help or solutions are greatly appreciated.
While executing the SSIS package from visial studio it is running. If we execute from Integration services - - -> stored packages - - - -> msdb - - - -package name, the package gets executed.
But when scheduled through jobs it gives the following error in history
"Execution as user. <user name > The command line parameters are invalid. the step failed"
Hi, I have a SSIS package runnig trough my sql server 2005 schedule job every one hr. it is a simple package to pull some data from a table and transfer this data into a text file. it was runnign smoothly since long time, but today its not executing through my job and giving me the following error.
Executed as user: GYRODATAGyroDBA. ...n 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:13:27 PM Error: 2008-04-10 13:13:28.18 Code: 0xC001401E Source: Package1 Connection manager "DestinationConnectionFlatFile" Description: The file name "\Gyrow2kefw001PURCHASESPOOLsupplier.txt" specified in the connection was not valid. End Error Error: 2008-04-10 13:13:28.18 Code: 0xC001401D Source: Package1 Description: Connection "DestinationConnectionFlatFile" failed validation. End Error Progress: 2008-04-10 13:13:28.20 Source: Data Flow Task Validating: 0% complete End Progress Progress: 2008-04-10 13:13:28.34 Source: Data Flow Task Validating: 50% complete End Progress Progress: 2008-04-10 13:13:28.34 Source: Data Flow Task Validating: 100% complete End Progress DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:13:27 PM Finis... The package execution fa... The step failed.
If i try to execute the same package trough business development studio its working f9. anyone have any idea whats the problem is? masroor
I have a question - is it possible to visualize an execution of the SSIS package when it is being run from SQL Agent? "Visualize" means to show a data-flow "live" - similair to the visualization provided by BI Dev.Studio when you run a package there, with coloured boxes, blinking etc.
I searched the Web but found nothing - neither MS-related nor utilities from third parties. Is it possible in any way?
Thanks in advance,
Andrey.
P.S. Parsing log-files is an option, but we would like to try first something less "painfull" and more universal...
I have two packages which is having parent child relationship.
Package1 is calling Package2, Package2 will download the input files from remote server using COZYROC SFTP Task. then Package1 will execute.
It is working fine in BIDS and SQL Agent job in "DEV" Server. But it is not wroking when i deployed the packages and it's config files and then created a SQL Agent JOB to "QA" Server.
The Error is:
Description: The connection type "SSH" specified for connection manager "LG-AUS" is not recognized as a valid connectionmanager type. This error is returned when an attempt is made to create a connection manager for an unknown connect ion type. Check the spelling in the connection type name. End Error Error: 2008-04-23 05:33:57.26 Code: 0xC0010018 Source:
Description: Error loading value "<DTS:ConnectionManager xmlnsTS="www.micro soft.com/SqlServer/Dts"><DTSroperty DTS:Name="DelayValidation">0</DTSroperty ><DTSroperty DTS:Name="ObjectName">SFTP-CMS</DTSroperty><DTSroperty DTS:Na me="DTSID">{49D115FA-B208-4BFC-928D-7CC0964E743A}</DT" from node "DTS:Connection Manager". End Error Error: 2008-04-23 05:33:57.29 Code: 0xC00220DE Source: EPT Calling LG_Inbound
Description: Error 0xC0010014 while loading package file "C:QATestLG-SFTPInbound.dtsx". One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors. . End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 5:33:55 AM Finished: 5:33:57 AM Elapsed: 1.359 seconds
I currently need help on an issue I can't find the solution.
I developed a package and I when I run it from the Integration Service directly it runs and ends correctly, deletes/creates tables on the db on the server the package is running and copy the data from the other db.
I want to specify that I use two db in different domain as source and destination.
When I schedule it using the Sql scheduler it fail reporting the following error:
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "DBname" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Can anyone of you give me a clue about the issue I have?
Can I roll back certain query(insert/update) execution in one page if query (insert/update) in other page execution fails in asp.net.( I am using sqlserver 2000 as back end) scenario In a webpage1, I have insert query into master table and Page2 I have insert query to store data in sub table. I need to rollback the insert command execution for sub table ,if insert command to master table in web page1 is failed. (Query in webpage2 executes first, then only the query in webpage1) Can I use System. Transaction to solve this? Thanks in advance
I am attempting to write a Windows service that watches a database for uploaded files to import. When a new file is found, the corresponding SSIS package is run from the file system with variables passed through. I started development as a Windows app and copied the functionality to a service.
The app runs fine. The service does not. I get a "Failure" each time a package is executed. Everything is identical behind the scenes with the obvious exceptions that OnStart and OnStop handlers are buttons in the app. I added a script task at the beginning of one of the SSIS packages to notify me that it is even running at all. It doesn't even hit that initial task.
Again, the app will run all packages just fine. The data is imported and the results return as "Success."
The following is the code executing the package. Any help is appreciated. I've been banging my head on this one for a few days now. (Is there a tag to format a code sample?)
Dim pkgLocation As String Dim pkg As New Package Dim app As New Application Dim pkgResults As DTSExecResult
Hello friends! I have one query regarding execution of SSIS package through Stored Procedure.
I have created SSIS package which extract data from database and put that into various text files.Here I am using two global variables one is for Department ID and another is path where I wanna to place my text files as per departments.When I ran it through command prompt it works fine but now I want that dtsx package to run from stored procedure with same input parameters
Source: {8A27E8DF-051B-4F6B-9538-85BED1F161D8} Description: Unable to load the package as XML because of package does not have a valid XML format. A specific XML parser error will be posted. End Error Error: 2007-02-22 11:31:37.32 Code: 0xC0011002 Source: {8A27E8DF-051B-4F6B-9538-85BED1F161D8} Description: Failed to open package file "C:setupSSIS PackagesSSIS Package File Extract DataSSIS Package File Extract DatainDataExtract.dtsx" due to error 0x80070003 "The system cannot find the path specified.". This happens when loadin g a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format. End Error Could not load package "C:setupSSIS PackagesSSIS Package File Extract DataSSIS Package File Extract DatainDataExtract.dtsx" because of error 0xC0011002. Description: Failed to open package file "C:setupSSIS PackagesSSIS Package File Extract DataSSIS Package File Extract DatainDataExtract.dtsx" due to error 0x80070003 "The system cannot find the path specified.". This happens when loading a package and the file cannot be opened or loaded correctly into the XML document. This can be the result of either providing an incorrect file name was specified when calling LoadPackage or the XML file was specified and has an incorrect format.
And also I am not understand where i should pass my two input parameters which I used in SSIS package variables???????
I am using SSIS packages for transfering data from a legacy SQL server to a new one. The database has around 700 Tables. Out of which, data from 20 tables need to be transfered. I have created 20 data flows for that. The SSIS package is executed using a utility program that i've written using c#. I capture all the events and use them for some post processing. I look at the status of each of the data flows (whether failed, complete, etc.. ) and take decisions appropriately.
There should be a provision built-into(my utility) the application that allows users to suspend the execution of the package and restart it later.. I cannot use the package's suspend function here as suspend functionality in my case means that the user could even reboot the comp. He may then restart the execution of the package from the last logical point. My initially thinking was, that i would (somehow) store the number of records transfered to the target for a dataflow and later when the user restarts the execution, i would change the SQL query in the dataflow to start from the records > than the one i've saved. But how do i get the row number?? T-SQL supports row_number() but it seems that it cant be used with the WHERE clause. Does anyone know how to deal with this problem ??
Is it possible to save the current execution state of a package in file and restart it at a later point (even after reboot)?
If I set the for loop to loop just once, the package is executed fine. Any more than once and only one instance of the package is executed.
Does anyone know what I am doing wrong? I know it is possible to execute the two package instances simultaneously because you can use DTexecUI.exe on two clients to do this.
When I veiw the exexcution/progress results for a package they show in order of the name of the task, is there anyway to see this tree view in order of the execution?
I have been trying to schedule a package I design to run off hour, but unable to do so. Here is a strange issue:
1. I was able to fully run and complete the package through VSS. My package has three steps and I have on complete arrows from one step to the next... When I run it, it does what I expected in SSIS designer.
2. I was able to deploy and run the actual package by double click on the file system and it runs successfully through Execute Package Utility.
So my package does loop through a file folder and insert records from within the folder through execute SQL task to a SQL table...etc. Typically it takes a while to run....
However, when I put the package under SQL agent and run it as a job (through setting up the sql job to call a package on the file system). It runs and completed within a few seconds.... Somehow, it didn't give me an error, but it doesn't seem like it acutally runs the package.
Does the execution of the package somehow sends success message back prematurely to SQL job? Why does it not successful run?
Is there any configuration setting that I am missing here? How can I find out if it actually runs the package and why does it returns so quickly and claim successful, yet it didn't do anything??
