Transact SQL :: Query To Calculate In Array Like Excel
Nov 4, 2015
I am trying to create a "Loan Ledger Card" in SSRS which does the calculation up to report extracting time. I was able to create it on Excel (Click to download the Excel file) as we can calculate amounts for each installment based on Row and Column name. You can test it by putting any amount (Here it should be below 62000 as it is the total balance of loan) in "Amount Paid" yellow cell and see the effect.
I have made a selection in SQL (attached query and result in screenshot). It calculates the total paid amount by now on the first row, and all due amounts in other rows. Basically, It should first deduct the interest from first row, then principle, same process for second row and so on until it covers the whole paid amount.
SELECT
'0' As RN
,memrepay.lnr
,'Repayment' AS Type
,SYSDATETIME() AS NOW
,SUM(memrepay.mprinc) As PrincPaid
,SUM(memrepay.mint) As IntPaid
[Code] .....
How can I do the similar calculation of Excel file in "SQL query" or "SSRS custom code"?
View 2 Replies
ADVERTISEMENT
Jan 25, 2007
All,
I am using Reporting Services 2005. One of my reports is getting the following error when I try to export to Excel. It will export to .CSV though.
"Destination array was not long enough. Check destIndex and length, and the array's lower bounds."
Any suggestions would be greatly appreciated. Please copy me at machelle.a.chandler@intel.com.
Machelle
View 10 Replies
View Related
May 12, 2015
I am trying to update my SQL table using an update query in powershell from an excel sheet.
The query is as follows,
#building name from excelsheet
$TCell=$reader.GetValue(8);
#update query is as,
$CreateScript1= "UPDATE $DestinationTable SET $DestinationTable.Phone = '$SCell' WHERE RoomNumber = '$FCell' and buildingname
like ''$TCell'%'"
I want to use like operator in the query to compare building name from excel sheet with the building name in sql table. I am facing an error in the highlighted part. I am not sure if my query is right or wrong.
View 2 Replies
View Related
Jul 9, 2015
I am trying to fetch records from excel sheet using Select Query but I am getting the error message saying
"Msg 7302, Level 16, State 1, Line 1
Cannot create an instance of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "(null)"."
Here is my Query,
sp_configure 'show advanced options',1
reconfigure with override
go
sp_configure 'Ad Hoc Distributed Queries',1
reconfigure with override
go
reconfigure
SELECT *
FROM OPENROWSET
('Microsoft.Jet.OLEDB.4.0', 'Excel 8.0;Database=C:M2MworkedworkedBOS.xlsx;HDR=YES', 'select * from [Sheet1$]') AS A;
View 5 Replies
View Related
Aug 13, 2015
I have to send an array, which are generated in C++ (or C#) to an SQL-INSERT. Something like this:
INSERT INTO Table1
(Col1,Col2)
VALUES(:a,:b)
// a and b are my arrays//:a=A,B,C,D.....//:b=1,2,3,...
Is there any way to do something like my prototype in MS SQL Server? If yes how should be my INSERT?
View 3 Replies
View Related
Jun 17, 2015
Need calculating the count of events on each day. I have an event log table as shown below.
DECLARE @EventLog TABLE ( event_id int, status_id varchar(20) , dttm datetime )
INSERT INTO @EventLog
SELECT '100','Inplace','01/05/2015 05:00' UNION ALL
SELECT '100','Removed','03/05/2015 10:00' UNION ALL
SELECT '100','Inplace','05/05/2015 10:41' UNION ALL
[Code] ....
I need an output to look like on each day how many events were in place.
E.g.: for the month on May , Event_id 100 was inplace on 1st and removed on 3rd , so on 1st may 2 event_ids (100, 103) hence 2 .
event_ids - 103 / 104 and inplace the whole month and not removed. so its calculated the count as 2 til towards teh end of the month.
So I need to count of all each event_id in place for each day in may.
How to calculate the missing dates to ...
View 7 Replies
View Related
Oct 28, 2015
How do I author a SQL Query which meets the following requirement: Display a ratio of (instances where status is a success)/(instances where status is a success or instance is a failure). The below syntax is incorrect. However, I hope to beter explain what I am trying to accomplish using the incorrect SQL query below.
SELECT SUM(Case When Status = "SUCCESS")/SUM( Case When Status = "FALLBACK")
FROM ruleResults;
View 2 Replies
View Related
Oct 8, 2015
I have the following store procedure :
SELECT APHIST.ReturnDate AS ATDATE
,API_HIST.[ActionPlanItemID]
,API_HIST.[ActionPlanID]
,PIT.[ProductItemID]
,PIT.ProductItemCode
,PIT.Name,
[code]....
What I am trying to get is a RunningStock level column which is able to display stock level as describe below :
If ItemStatus value is 0, that means that the item has been taken out from stock.
So based on that the first row running Stock level is calclulated as
(ProductQuantity * ItemUnitWeight)-ItemQuantity=9...
For the second record, ItemsStatus=1 which means the item return to stock, at the time the running stock value calculation should be the previous row Running Stok value (=9 ) +(ItemQuantity*ItemUnitWeight)When the ItemStatus=2, that means the item is definitely out and will be never back to current stock. Is there a way to get that calculation field ?
View 6 Replies
View Related
Sep 16, 2015
I have table named #table and three columns. SinGroup(it does not matter, can be anything), Column1, and Column2.
CREATE TABLE #table(
sinGroup NVARCHAR(10)
,column1 INT
,column2 int
);
And i have some data:
INSERT INTO #table(sinGroup,column1,column2) VALUES
('y1',100,0),
('y2',0,60),
('y3',40,20),
('z1',150,0),
('z2',0,50),
('z3',0,50)
I want to know how to get this result set (c1 - c2 and group by Y and Z and the result shown under the column 1):
SinGroup C1 C2
y1 100 0
y2 0 60
y3 40 20
Y 60 0
z1 150 0
z2 0 50
z3 0 50
Z 50 0
And also result like this (c1-c2 and grop by each row,the result show under the column 1):
SinGroup C1 C2
y1 100 0
y1 100 0
y2 0 60
y2 -60 0
y3 40 20
y3 20 0
z1 150 0
z1 150 0
z2 0 50
z2 -50 0
z3 0 50
z3 -50 0
View 5 Replies
View Related
Sep 30, 2015
I would like to INSERT an array of integer into a table in MSSQL Server, then count the number of rows in the table with c++ using ODBC. Here you find my code to do this task:
#include <windows.h>
#include <stdlib.h>
#include <stdio.h>
#include<tchar.h>
#include <sql.h>
#include <sqlext.h>
#include<sqltypes.h>
[Code] ....
In my code, I would like to Insert the array and then count the number of rows:
SQLTCHAR Statement[] = _T("INSERT INTO information1(Wert1,Wert2) VALUES(?,?) select count(*) as a from information1 ") ;
Problem : My expectation is, that first 9 rows are inserted into table then comes 9 as result to user (if the table is empty) but this code returns me 1 if first the table is empty. If the table is not empty, it returns 1+number of existing rows in the table. If I take a look inside the table, the 9 rows are successfully inserted in it. Only the number of rows in the table is wrong.
Hint : If I monitor the database using SQL Profiler. It looks like this:
Why this statement doesn't work correctly?
View 7 Replies
View Related
Aug 19, 2015
I have 2 tables as follows:
table A-NewParts
PartNumber
Description
LaunchDate
a123
product a
4/1/2009
[code].....
I want to get end result as sales for each new product for a rolling period from Launch date as year1 sales,year2 sales...and so on which I got through case statements.I am stuck on how to get the total Sales for all products (including new products) in the same rolling period based on the different launch dates for each new product.
PartNumber
Description
LaunchDate
Yr1 Sales
Total Yr1 Sales
Yr2 Sales
Total Yr2 Sales
a123
[code].....
View 3 Replies
View Related
Nov 16, 2015
I need to build a query to calculate the size of all tables in a database ...
View 5 Replies
View Related
Mar 27, 2014
I am on SQL Server 2008 R2. I have a table that contains a field called [Location]. In that field is a UNC path to the physical file on the repository. Is there a way in SQL Server that I can say give me the select sum([Location] UNC file) where criteria? I saw some posts about xp_filesize or xp_GetFileDetails, but I do not see them in master. I am unable to add anything and wondering if there is any native functionality that would allow me to accomplish this!?
View 4 Replies
View Related
Jun 17, 2015
I have a table which has name,Speciality,start date and end date. So each person may have 1/more rows .They will have more if they change their specialities. For example if you look at the data below.
AdjusterNameSpecialtyDatestartDateEnd
Test Inside Property2009-08-29 2010-07-31
Test Management2010-08-012012-07-31
If we see at the data above Test has 2 rows because he changed his specialty in the middle.My requirement is to calculate the total number of employees in each month for last 2 years in each speciality. For example if we look at the example above, Test was in Inside property from 2009 Aug to 2010 Aug but if i use just the date start and take the month for each adjuster it gives me the number of adjusters started in that year and month but what i want is Test should be counted in all the months for Inside property until 2010 07 month. Which means i want to have the total number of adjusters present by each speciality for each month of last 2 years .
View 2 Replies
View Related
Jul 14, 2015
I have a data set as -
ID Set Date DB Date
100 Null 07/01/15
100 07/05/15 07/02/15
100 07/10/15 07/08/15
I want to able to get 2 unique dates
1. 07/02/15 - As I want the DB date for ID - 100 when set date changed from a null value to non null value.
2. 07/08/15 - As I want the DB date for ID - 100 when a non null set date changes.
The table has such records for lot of different ID's.
View 29 Replies
View Related
Oct 30, 2015
Col1 Col2 Col3 Col4
54763.00 21 0 0
--Row1
59574.00 23 0 0
--Row2
64085.00 20 0 0
--Row3
0.0 0.00 0 0 0
--Row4
I'm trying to calculate Average of Col1 of above table based on below scenario:
CASE WHEN all the columns in the above table are “0” (as highlighted) THEN I want AVERAGE of Col1 as (Row1+Row2+Row3)/3
ELSE if at least one of the column of highlighted row has value other than “0”, THEN I want the AVERAGE of Col1 to be (Row1+Row2+Row3+Row4)/4
View 7 Replies
View Related
Nov 4, 2015
How to calculate estimated completion time of a job and what is the variance/difference in time based on previous job history. Looking for tsql query which can accomplish this.For example)...Daily a job is taking 10 mins to complete. However, today due to some reason, the job is running over an hour and still running. It could be a blocking issue or some performance issue on the server due to which the job is still running.
In such cases, using a tsql query or a stored proc which monitor these jobs every 3 mins (Configurable value), so every 3 mins , query has to check, if they are any jobs which are taking more time than its usual completion time/avg completion time in that case shoot an email using dbmail functionality i.e. sp_Senddbmail .. From there, DBA can dig further using waits or sql trace etc...
View 7 Replies
View Related
Jun 4, 2015
I have a table "PrintArea" with below table structure.
The Details column have " " separated data.
CREATE TABLE [dbo].[PrintArea](
[ID] [int] IDENTITY(1,1) NOT NULL,
[AccessDate] [datetime] NULL,
[IPAddress] [varchar](16) NULL,
[SerialNum] [varchar](256) NULL,
[Description] [varchar](256) NULL,
[Details] [varchar](2048) NULL,
)
This is how the data lookis like.
INSERT [dbo].[PrintArea] ([ID], [AccessDate], [IPAddress], [SerialNum], [Description], [Details]) VALUES (104280, CAST(0x0000A28A00A88310 AS DateTime), N'70.89.39.161', N'InSign-f529c824-85a6-4a64-8c59-e9f786d718f3-YM2AS31367,BFEBFBFF000306A9', N'Printing', N'Headboard_Insert_4
1
1
7938
5579
[Code] ...
I want to calculate totalAreaPrinted based on below formula from Details column.
View 2 Replies
View Related
May 9, 2015
I needed to create a stored procedure to lock a user who makes 3 incorect entries of his password. I did it successfully. Now the problem what i have is that i want to lock the user only if he makes the 3 incorrect entries within 30 minutes.
I created a field named "FirstEntryTime" of type datetime that saves the date of the first incorrect entry. I tried to make an if statement:
if (@timesOfEntry <=2 AND DATEDIFF(MINUTE, firstEntryTime,GETDATE()) <= 30)
Begin
Update myTable set ...
End
View 6 Replies
View Related
May 16, 2015
I have a table like below
i need to calculate total working time against 'AttID' (where I - intime, O - OutTime)
ex :
AttID TotalTime
1 08:02:00
2 07:45:00
View 7 Replies
View Related
Jun 7, 2015
Iam trying to calculate the number of working days between two dates. Iam getting the uouput as only 1 02 r working days??
select building_number as SchoolID,building_name as Campus, count( distinct( CASE WHEN(( DATEPART(dw, CurDate) + @@DATEFIRST)%7 NOT IN (0,1)) tHEN 1 ELSE 0 END)) as NumberofDaysServed from Sales sl join Buildings b on sl.Building_Num =b.Building_number join students2 s on s.Student_Number= sl.Student_Num join Sale_Items SI on si.UID = sl.UID where CONVERT(CHAR(10),CurDate,120) between '2015-05-01' and '2015-05-07' and VoidReview <> 'v' and SI.INum = '1' group by building_number,building_name order by building_number,Building_Name;
View 8 Replies
View Related
Oct 22, 2015
I have a table Product2 as the attachment at the bottom. Now i want to create a Column "Purchasing rate" over Product and Region like this. I tried some Code but it gave me still Error.
createtableProduct2
(
[product] [varchar](255),
[Region] [varchar](15),
[Subregion] [varchar](25),
[Code] ....
View 5 Replies
View Related
Jan 31, 2007
I want to do a query on an SQL Server 2005 db and have the results returned into aarray or collection in vb.net... how do I do this? I know the basicconnection and stuff.. just not how to get the result to an array thanks!
View 1 Replies
View Related
Jun 25, 2007
I have a stored procedure that has a paramter that accepts a string of values. At the user interface, I use a StringBuilder to concatenate the values (2,4,34,35,etc.) I would send these value to the stored procedure. The problem is that the stored procedure doesn't allow it to be query with the parameter because the Fieldname, "Officer_UID" is an integer data type, which can't be query against parameter string type.
What would I need to do to convert it to an Integer array?
@OfficerIDs as varchar(200)
Select Officer_UID From Officers Where Officer_UID in (@OfficerIDs)
Thanks
View 5 Replies
View Related
Oct 17, 2006
Hi.
I have a VB.NET function that returns an array of Integers.
Say, FunArray = [2, 3, 5, 8, 6, 23, 1, 10, 20 , 4, 54]
One characteristic of the array is that no two numbers
repeat - it reflects the IDs of my Users table. And, that
it is not ascending or descending.
What I would like to know is how do I sort my query in
the order of the integers in this array? Ideally, I
would like to use ORDER BY for this query.
thanks in advance.
View 2 Replies
View Related
May 23, 2007
I'm looking for a way to pass an array of values as a parameter to a query in a table adapter. For example I want to run a query something like:SELECT * FROM menu WHERE menu_role IN (@roles)And I could pass something like 'RegisteredUser, SuperUser, OtherUser' to the @roles parameter.For some reason I can't figure out a way to do this. Any help would be greatly appericated.Thanks,Ryan.
View 6 Replies
View Related
Jan 31, 2008
how to pass array(query parameter) into stored procudure. with this array i need to retrive data,with another array i have to retrive another set of data.
eg: suppose @param1 contains chapter1,Chapter2,Chapter3,
@param2 contains unit1.1,unit2.1,unit2.2,unit3.1,unit3.6
how can i do in stored procedure
love all
View 1 Replies
View Related
Jul 28, 2015
I have a string variable and following data.
Declare @ServiceID varchar(200)
set @ServiceID='change chock','change starter','wiring for lights','servicing'
when I assign values in @ServiceID in the above manner then it shows error. How to get string array in @ServiceID variable so that i can go ahead.
View 8 Replies
View Related
Nov 29, 2013
I am trying to calculate an average within a query:
coalesce(field1, 0) + coalesce(field2], 0) + coalesce(field3, 0)/Count [AVG]
It seems to be subtracting the value of field3 from the total of 3 fields at some points instead of giving me the average.Some of the results are here:
Count Field1 Field2 Field3 Total Average
===== ====== ====== ====== ===== =======
2NULL6NULL66
11NULL28134129
10NULL33NULL3333
3NULL12NULL1212
[code]....
View 4 Replies
View Related
Aug 29, 2007
hello,
Does anybody knows how to calculate cost of query ? Any help link or something.
--kneel
View 6 Replies
View Related
Aug 18, 2015
How I can calculate the 'SUM of 100' of EDSUM column for EDCOST column. Every EDCOST should have sum of 100 on the calculation of EDSUM. I just want to know which is the EDCOST which has <>sum of 100.
Create table #sum (ED numeric, EDCOST numeric, EDName char(6), EDSum numeric, EDCode char(2))
Insert into #sum values (121, 2000,'HLMO',98,'DT')
Insert into #sum values (122, 2000,'HLMT',2,'DT')
Insert into #sum values (123, 2001,'HLMO',100,'DT')
Insert into #sum values (124, 2002,'HLMD',97,'DT')
[Code] ...
Expeced Output:
ED EDCOST EDName EDSum EDCode
126 2003 HLMR 98 DT
130 2005 HLMR 98 DT
View 7 Replies
View Related
Dec 24, 2014
I have to caculate the fifo inventory aging from purchase date, for example I have one item with 100 units in stock, and purchase this month 20 units, and 200 units three month ago, this item has 20 units this month and 80 units from 3 month ago.
Data is as follows:
<<<<< ORIGINAL DATA >>>>>>>>>>>>>>>>
Code:
Code StockPO Date PO_Qty
ao0-123100OC001010-08-2014 8
ao0-123100OC001110-08-2014 4
ao0-123100OC002011-10-2014 50
ao0-123100OC002111-10-2014 2
ao0-123100OC002211-10-2014 20
ao0-123100OC003012-11-2014 10
ao0-123100OC003112-11-2014 1
ao0-123100OC003212-11-2014 20
And the reuslt must be something like this:
<<<<< ORIGINAL DATA >>>>>>>>>>>>>>>> <<<<< CALCULATED DATA >>>>>>
Code:
Code Stock PO Date PO_QtyDays_Old Qty_From_PO Residue
ao0-123100OC001010-08-2014 8 135 8 92
ao0-123100OC001110-08-2014 4 135 4 88
ao0-123100OC002011-10-2014 50 73 50 38
ao0-123100OC002111-10-2014 2 73 2 36
ao0-123100OC002211-10-2014 20 73 20 16
ao0-123100OC003012-11-2014 10 41 10 6
ao0-123100OC003112-11-2014 1 41 1 5
ao0-123100OC003212-11-2014 20 41 5 0
I need to built a select to make this calculation, not using cursors, and build a view, only a basic select.
View 4 Replies
View Related
Apr 15, 2010
I have a requirement where i need to calculate the age of a work order excluding the Weekends (Sat,Sun) in an SQL table, this i need to updated as a formula for a particulay column in the SQl table so when a task startdate is enterred and submitted the Age field gets populated with the number of working days.
Example:
startdate = '04/09/2010'
currentdate = '04/12/2010'
the result should show 1 day and not 3 days.
View 20 Replies
View Related
