Transact SQL :: Query To Get Date Span Between Dates
May 23, 2015
I need to calculate the amount of time between each visit. I am pulling the Row Number for my visits and now I need the date span that goes between each day. I also need a new column that returns a Yes or a No if the date span exceeds 3 years.
SELECT
ROW_NUMBER ( ) OVER ( PARTITION BY pv.PatientProfileId ORDER BY pv.Visit ASC ) AS RN
, CONVERT ( VARCHAR ( 20 ) , pv.Visit , 101 ) AS Visit
, pv.TicketNumber
, vstatus.Description AS VisitStatus
, doc.ListName AS Doctor
[Code] ....
View 3 Replies
ADVERTISEMENT
Aug 22, 2015
i have a table like below
CREATE TABLE #Test (FromDate DATE,ToDate DATE)
insert into #Test VALUES ('2015-08-08','2015-08-11')
insert into #Test VALUES ('2015-08-13','2015-08-16')
insert into #Test VALUES ('2015-08-19','2015-08-21')
SELECT * from #Test
drop TABLE #Test
i need to display the dates as single column between from and todate.my expected result is like below
CREATE TABLE #Result (ResDate DATE)
insert into #Result VALUES ('2015-08-08')
insert into #Result VALUES ('2015-08-09')
insert into #Result VALUES ('2015-08-10')
insert into #Result VALUES ('2015-08-11')
[code]....
View 2 Replies
View Related
Aug 20, 2015
Basically, I have a membership table that lists each member with an effective period, Eff_Period, that indicates a month when a member was active. So, if a member is active from Jan to Mar, there will be three rows with Eff_Periods of 201501, 201502 and 201503.
All well and good.But, a member may not necessarily have continuous months for active membership. They might have only been active for Jan, Feb and Jun. That would still give them three rows, but with noncontinuous Eff_Periods; they'd be 201501, 201502 and 201506.There is also a table that logs member activity. It has an Activity_Date that holds the date of the activity - betcha didn't see that comin'. What I'm trying to do is determine if an activity took place during a period when the member was active.
My original thought was to count how many rows a member has in the Membership table and compare that number to the number of months between the MIN(Eff_Period) and the MAX(Eff_Period). If the numbers didn't matchup, then I knew that the member had a disconnect somewhere; he became inactive, then active again. But, then I thought of the scenario I detailed above and realized that the counts could match, but still have a discontinuity.So, is there a nifty little SQL shortcut that could determine if a target month is contained within a continuous or discontinuous list of months?
View 14 Replies
View Related
Sep 25, 2015
I want a difference in days
Select datediff(dd,Target_Date,Achv_Date)
Now , checks are
1] when target date greater than achv_Date the difference should be greater than 0
means for FileID 77608
Select datediff(dd,'2015-09-24 00:00:00.000','2015-09-24 10:42:32.823')
i am getting -6 it should be 6 cant switch Target_Date and Achv_Date in datediff else i will get opposite result in first four records basically, i want a two column TAT and Status beside achv_date based on the values of two dates difference see above ..and also want a result of (No. of Yes in status / No. of Files that has achv_date )i.e. result= (7/8) = 87%
View 6 Replies
View Related
May 7, 2015
In a stored procedure I have 2 dates that I need to combine parts of into a third date. I need the year from date1 and the month/day from date2.
Date1 = '2015/6/1'
Date2 = '2016/1/1'
Date3 needs to be '2015/1/1'
I have been messing around with datepart and dateadd with no luck.
View 3 Replies
View Related
Jun 3, 2015
I have a simple following table which is having only one date column.
CREATE TABLE TEST_DATE
(
InputDate DATE
)
GO
INSERT INTO TEST_DATE VALUES('01-01-2015')
INSERT INTO TEST_DATE VALUES('06-25-2015')
INSERT INTO TEST_DATE VALUES('11-23-2014')
GO
SELECT * FROM TEST_DATE;
And the expected out put would be as follows:
I want to derive a Four Quarter End Date based on Date selected.
For Example if i select 01-01-2015 then
First Quarter End Date would be Previous Quarter End Date
Second Quarter End Date would be Current Quarter End Date
Third Quarter End Date would be Next Quarter End Date
Fourth Quarter End Date would be Next +1 Quarter End Date Like that
View 9 Replies
View Related
Sep 10, 2015
I want generating Valid date ranges from any list of dates.
The List of Dates could be generated from the below TSQL -
SELECT '2015-06-02' [Date] UNION ALL
SELECT '2015-06-13' UNION ALL
SELECT '2015-06-14' UNION ALL
SELECT '2015-06-15' UNION ALL
SELECT '2015-06-16' UNION ALL
SELECT '2015-06-22' UNION ALL
SELECT '2015-06-23' UNION ALL
SELECT '2015-06-24'
And the expected output should look like -
SELECT '2015-06-02' FromDate, '2015-06-02' ToDate UNION ALL
SELECT '2015-06-13' FromDate, '2015-06-16' ToDate UNION ALL
SELECT '2015-06-22' FromDate, '2015-06-24' ToDate
View 2 Replies
View Related
Nov 17, 2015
My scenario is: a person has many events, all based on a date. I need to aggregate the person to show min and max dates for a period, the period being defined as ending when there is not an event following the next date.
DECLARE @Events TABLE
(
PK_EventINTIDENTITY(1,1) PRIMARY KEY
,FK_UserINTNOT NULL
,EventDateDATENOT NULL
)
DECLARE @User TABLE
[Code] ....
I would expect the groups to look something like below:
Is this where a recursive CTE may be used?
View 6 Replies
View Related
Nov 19, 2015
I need a boost to understand how to get started on solving this SQL Query.
TicketId Seq StatusDateTime
T10001 1 2015-05-04 15:54:00.000
T10001 2 2015-05-04 16:35:00.000
T10001 3 2015-05-04 16:42:00.000
T10001 4 2015-05-05 08:19:00.000
T10002 1 2015-05-04 15:56:00.000
T10002 2 2015-05-04 15:57:00.000
I need to find the total StatusDateTime for each TicketId
I need to find the average StatusDateTime for all TicketIDs
Ex. TicketId, "T10001", has 4 records based on the Seq column.
By using this, I should be able to find the amount of time between the first Seq and the last Seq to get a total time span for Ticket.
Expanding on this, I should be able to add up all of the Ticket's calculated time spans and divide by the number of tickets to get the average time span.
View 6 Replies
View Related
Oct 19, 2015
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
[code]....
I am trying to display all records older then 5 Mondays span..so far I got this and it is working fine but it is excluding the records with Id 2 and 4 (Sundays) I would like to include these records as well.
View 4 Replies
View Related
Oct 14, 2015
Here I have 2 Dates. CreatedDttm & ModifiedDttm.
I want - DATEDIFF(Day,CreatedDttm,ModifiedDttm) and I have to exclude the Weekend days from that query result.
View 10 Replies
View Related
Dec 18, 2007
I need a formula to calculate the time (let's say in minutes) between two dates/times.
The problem is that I have to exclude the time between 06 PM and 06 AM and also exclude the time in the weekend (Saturday and Sunday).
I will use this in a couple of reports made in Reporting Services.
If anyone have an algoritm that could be modified for this and is willing to share this I would be very grateful.
Many thanks!
/Per Lissel
View 3 Replies
View Related
Oct 18, 2015
IF OBJECT_ID('tempdb..#OverLappingDates') IS NOT NULL
DROP TABLE #OverLappingDates
CREATE TABLE #OverLappingDates
(
MemberID Varchar (50),
ClaimID Varchar(50),
StartDate DateTime,
EndDate DateTime
)
[Code] ....
I need to select only records where dates are over lapping for the same memberid...For this scenario i need an output First 2 records (MemberID 1 has 2 claiims overlapping dates).
View 2 Replies
View Related
Feb 8, 2006
Hi,
I have the following table:
Table name Employee
===============
emp_id,
emp_name,
emp_city
Table name EmpStatusReport
===================
emp_id,
action
date
I need to write a sql query to get the emp_name, emp_city and the recent date when the user has sent status report over last 30 days. The user has sent a status report if action field in the empStatusReport is set to 'reported'. This table gets filled everytime user sends report.
I tried to the do the following:
select e.emp_name, e.emp_city, esr.date from employee e, EmpStatusReport esr where e.emp_id and esr.emp_id and
/* esr.date = max(esr.date) and esr.date > currentDate - 30 and esr <= currentDate */
I am not able to write a correct login for date part. Any help in this will be highly appreciated.
Thanks!
View 4 Replies
View Related
Sep 29, 2015
how to write a query to get current date or end of month date if we pass year and month as input
Eg: if today date is 2015-09-29
if we pass year =2015 and month=09 then we have to get 2015-09-29
if we pass year =2015 and month=08 then we have to get 2015-08-31(for previous months we have to get EOMonth date & for current month we have to get current date).
View 3 Replies
View Related
Jun 23, 2015
I need query to get the Max date of CODE.
OID CODE Current_date
3710 250 01/01/1997
3910 250 03/03/1998
4100 250 01/01/2014
1200 251 01/01/2013
1301 252 01/01/2001
1450 252 01/01/2014
1451 252 01/01/2015
Expected result after taking max(effdate) of CODE
OID CODE Current_date
4100 250 01/01/2014
1200 251 01/01/2013
1451 252 01/01/2015
View 7 Replies
View Related
Oct 15, 2015
I have the follwing function in my SQL data base which is hosted in Azure.
All date and time field in my db are store as UTC and I have a function define as below :
ALTER FUNCTION [dbo].[func_GetCurrentLocalTimeFromUTC]
(
)
RETURNS datetime
AS
BEGIN
DECLARE @OffSet as int = 1
DECLARE @CurrentDate as datetime = getUTCdate()
[Code] ...
Now what I have trying to do is to perform a select statement on a table where I have a dateTime value field and add the proper offset value to the field in order it is display based on where user will run the query. For example if I run this simple query :
SELECT INVENTORYDATE from Inventory
Will return the UTC dateTime value.
How can I use the select statement in order to get the field format with proper offset based on user pc timezone/. Please note that the query will be called from a rrs.
View 5 Replies
View Related
Oct 14, 2015
This one is making my head hurt! Trying to figure out how to query for records between date range. The records have a start_date and an end_date field. The end_date field maybe null.
For example, say you wanted to see the records of everyone checked into a hotel during a given date range. You need to account for the people that checked in before you @start_date parameter and may check out after your @end_date parameter.
fyi- As for the null end_date field, think of this as they have checked in and not sure when they will checkout yet.
View 7 Replies
View Related
Dec 2, 2015
I have a table of errors with a DateTime field for when the error occurred. I want to query the table for a given date range omitting the time portion. What is the most efficient way to perform this query?
View 5 Replies
View Related
Aug 18, 2015
I have a table with multiple rows per staff person. Each of these rows has staff_id, start_date, and end_date. Per staff, if any start_date comes between the start_date and end_date of a different row, or if any end_date comes between the start_date and end_date of a different row, then I have to flag these records as being identical.
How can I do this? I have tried doing a Cross Apply because I thought that would do Cartesian product (comparing every row), and I've also tried temp tables. But I haven't gotten either of these to work. Here is some dummy data:
if exists (select * from tempdb.dbo.sysobjects o where o.xtype in ('U') and o.id = object_id(N'tempdb..#staff_records')
) DROP TABLE #staff_records;
create table #staff_records
(
staff_id varchar(max),
[Code] ....
View 12 Replies
View Related
Aug 4, 2015
I'm trying to translate this portion of VFP code into LINQ query:
select COUNT(ID) as conflicts
from dbo.max4sale where <<thisform.cWhere>>
AND Start_Time >= <<VFP2SQL(m.ltBegin + m.lnStartTime)>>
and Start_time <= <<VFP2SQL(m.ltEnd)>>
AND CONVERT(varchar(5),Start_Time,108) <= <<VFP2SQL(m.lcEndTime)>>
AND CONVERT(varchar(5),End_Time,108) >= <<VFP2SQL(m.lcStartTime)>>
<<m.lcDays>>
Here is my non-working attempt:
var startTime = new DateTime(1900, 1, 1, beginDateTime.Hour, beginDateTime.Minute, 0);
var endTime = new DateTime(1900, 1, 1, endDateTime.Hour, endDateTime.Minute, 0);
var daysOfWeek = dailyLimits.Where(dl => dl.Selected == true).Select(ds => ds.WeekDay).ToList();
if (daysOfWeek.Count() < 7) // not all days of the week selected
[Code] .......
First of all, I see a bug in my logic now as the first part of the query I need to do all the time and only the second part if the count < 7. But that's not my problem - I can not figure out how to make times comparison only using LINQ. Ideally I think I'd like to have cast(start_time as time) >= @p1 as a result to be executed by LINQ.
BTW, I am only getting the error in run-time that Parse can not be interpreted. So, I need to figure out another way of making LINQ recognize my intent of checking time portion of the date only.
View 9 Replies
View Related
Jun 18, 2015
I simply need to list the most recent value for each employee here... the value at each person's maximum date
Sample Detail Data:
EmpID Date Value
1 1/1/14 27
1 2/12/15 333
2 5/5/15 255
3 5/4/15 110
3 1/1/13 67
3 3/2/14 80
[Code] ....
What is the most efficient way to display the most recent value for each employee ID via MS SQL.?
View 4 Replies
View Related
May 12, 2015
Given the data below, I have a couple needs:
1) Query to determine if any date ranges overlap (regardless of category, e.g., row ids 6 & 7 below)
2) Query to determine if any date ranges of the same category overlap
declare @t1 table (id int primary key, category int, start_date datetime, end_date datetime)
insert @t1 select 1, 1, '1/1/2015 12:00:00 AM', '1/15/2015 12:59:59 PM'
insert @t1 select 2, 1, '1/16/2015 12:00:00 AM', '1/31/2015 12:59:59 PM'
insert @t1 select 3, 1, '2/1/2015 12:00:00 AM', '2/15/2015 12:59:59 PM'
insert @t1 select 4, 1, '2/16/2015 12:00:00 AM', '2/28/2015 12:59:59 PM'
insert @t1 select 5, 1, '3/1/2015 12:00:00 AM', '3/15/2015 12:59:59 PM'
[code]....
View 7 Replies
View Related
May 21, 2015
I have a data structure like this
UID , Name, amount, start date End Date
1 A 10 2015-05-01 00:00:00 2015-05-01 23:59:59
2 A 10 2015-05-02 00:00:00 2015-05-02 23:59:59
3 A 10 2015-05-03 00:00:00 2015-05-03 23:59:59
4 A 10 2015-05-04 00:00:00 2015-05-04 23:59:59
5 B 10 2015-05-05 00:00:00 2015-05-05 23:59:59
[code]...
View 5 Replies
View Related
Oct 30, 2015
Lets say I have a table, tblPersons
FirstName | LastName | DateofBirth
----------------------------------------
Thomas | Alva Edison | 10-10-2015
Benjamin | Franklin | 10-10-2015
Thomas | More | 11-10-2015
Thomas | Jefferson | 12-10-2015
Suppose today's date is 09-10-2015 in (dd-MM-yyyy format), I want to perform a query in such a way that I should get the data from the table above WHERE DateofBirth is tomorrow, so I could get the following result.
FirstName | LastName | DateofBirth
----------------------------------------
Thomas | Alva Edison | 10-10-2015
Benjamin | Franklin | 10-10-2015
View 15 Replies
View Related
Jan 11, 2006
hello
how can i select all dates upto todays date and include the first next future date in a given data base
say todays date was the 01/06/2006 (MM,DD,YYYY)
below is a mock data base
id date (MM,DD,YYYY)
1 01/02/2006
2 01/04/2006
3 01/06/2006
4 01/09/2006
5 01/20/2006
i want to select all dates equal or less that 01/06/2006 and include the first next future date .. and in this case it would be 01/09/2006
so the results would return
1 01/02/2006
2 01/04/2006
3 01/06/2006
4 01/09/2006
View 2 Replies
View Related
Aug 22, 2006
have a table with students details in it, i want to select all the students who joined a class on a particular day and then i need another query to select all students who joined classes over the course of date range eg 03/12/2003 to 12/12/2003.
i have tried with the following query, i need help putting my queries together
select * from tblstudents where classID='1' and studentstartdate between ('03/12/2004') and ('03/12/2004')
when i run this query i get this message
Server: Msg 242, Level 16, State 3, Line 1
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
the studentstartdate field is set as datetime 8 and the date looks like this in the table 03/12/2004 03:12:15
please help
mustfa
View 6 Replies
View Related
May 29, 2015
I want to sum all the dates and show the total date sum. How can I do that in SQL
For these dates
00:35
00.40
00.55
03.50
View 5 Replies
View Related
Aug 4, 2015
I have a date comparison situation in which I will have a column with a date and will have another value containing a GETDATE() minus two weeks. I want to be able to compare both dates and get the MIN date between the two. I'm not sure how to use the MIN(Date) in this scenario since the comparison won't be between two different columns, but between one column and a random date generated by the GETDATE() minus two weeks.
View 6 Replies
View Related
Sep 18, 2015
I have a Column CCExp Varchar(7) that stores data like below
NULL
'01/15'
'02/15'
'03/15'
'04/15'
'05/15'
[Code] ...
I am trying to get all expired cards which means, I am trying to get all cards which are behind sept 2015..like when I query I would like to get 8/15 and so on expired cards I am able to get the year , but with the below query I am getting all months less then 9 but i am missing 10,11,12 months cards values also I am having Conversion failed when converting the varchar value '#N' to data type int.
SELECT CustomerBillingInfoID ,
CCExp
FROM CustomerBillingInfo
WHERE LEFT( CCExp, 2) < MONTH(GETDATE())
AND RIGHT( CCExp, 2) <= RIGHT(YEAR(GETDATE()), 2)
and CCExp NOT LIKE '#%'
and CCExp not like 'NULL'
View 8 Replies
View Related
Oct 10, 2015
I have three date columns startdate,enddate,rmd
I need to write a query like get all the rows by comparing rmd with system todaydate and these must be with in startdate and enddate
id startdate enddate rmd
1 10-oct-15 16-oct-15 11-oct-15
2 11-oct-15 14-oct-15 11-oct-15
3 09-oct-15 11-oct-15 10-oct-15
4 07-oct-15 08-ot-15 07-oct-15
5
if sysdate(today) is 11-oct-15 then i need to get all the rows of 1, 2,3
View 5 Replies
View Related
Oct 15, 2015
TSQL statement, it should select the first date of the month at 11:59 PM as Firstdate and Closedate as 10 days later at 11:59 PM.
View 14 Replies
View Related
Nov 18, 2015
I have a table with 3 columns , let say (PatientID int, AppointmentDate date, PatientName varchar(30))
My source data looks in below way..
PatientID AppointmentDate PatientName
1 01/01/2012 Tom
2 01/10/2012 Sam
3 02/15/2012 John
I need output in below way..
PatientID AppointmentDate PatientName
1 01/01/2012 Tom (actual patient record)
null 01/10/2012 Tom
null 02/15/2012 Tom
null 01/01/2012 Sam
2 01/10/2012 Sam (actual patient record)
null 02/15/2012 Sam
null 01/01/2012 John
null 01/10/2012 John
3 02/15/2012 John (actual patient record)
I need t-sql to get above output. Basically the appointment dates are repeatedly assigned to each patient but only difference is patientid will be not null for actual patient record.
Create table sample (PatientID int null, AppointmentDate date null, PatientName varchar(30) null)
Insert sample values (1,'01/01/2012' ,'Tom'),
(2,'01/10/2012','Sam'),
(3,'02/15/2012','John')
View 2 Replies
View Related
