I have 2 tables which with one-many relation. Table B has three child records based on Table A. I want to update value in Table from one of the records in table B.
Right now I am thinking of creating 2 temp table importing values there but does not seem to work. Can someone please help thanks. Armoghan
I have a temp table like this
CREATE TABLE #Temp
(
ID int,
Source varchar(50),
Date datetime,
CID varchar(50),
Segments int,
Air_Date datetime,
[code]....
Getting Error
Msg 102, Level 15, State 1, Procedure PublishToDestination, Line 34 Incorrect syntax near 'd'.
I would like to update the flag of the promotion ID should the promotion ID date range overlap with Promotion ID(All) Date Range. The general logic is as below.
Update TableName
SET PromotionID Flag = 1 AND Reason = 'Overlap with row ID(Overlap row ID number)'
Where EACH ROW(Except with Promotion ID ALL) Date Range Overlap with ROW(with promotion ID ALL) Date range
Note: ROW is Partition By ColumnA,ColumnB
TableName: PromotionList
ID PromotionID StartDate EndDate ColumnA ColumnB Flag Reason
1 1 2015-04-05 2015-05-28 NULL NULL 0 NULL
2 1 2015-04-05 2015-04-23 2 3 0 NULL
3 2 2015-05-04 2015-07-07 2 3 0 NULL
4 ALL 2015-04-05 2015-04-28 NULL NULL 0 NULL
5 ALL 2015-07-06 2015-07-10 2 3 0 NULL
6 1 2015-02-03 2015-03-03 NULL NULL 0 NULL
Expected outcome after performing update on the table
ID PromotionID StartDate EndDate ColumnA ColumnB Flag Reason
1 1 2015-04-05 2015-05-28 NULL NULL 1 Overlap with row ID 4
2 1 2015-04-05 2015-04-23 2 3 0 NULL
3 2 2015-05-04 2015-07-07 2 3 Overlap with row ID 5
4 ALL 2015-04-05 2015-04-28 NULL NULL 0 NULL
5 ALL 2015-07-06 2015-07-10 2 3 0 NULL
6 1 2015-02-03 2015-03-03 NULL NULL 0 NULL
I have a table called ADSCHL which contains the school_code as Primary key and other two table as
RGDEGR(common field as SCHOOl_code) and RGENRl( Original_school_code) which are refrencing the ADSCHL. if a school_code will be updated both the table RGDEGR (school_code) and RGERNL ( original_schoolcode) has to be updated as well. I have been provided a new data that i have imported to SQL server using SSIS with table name as TESTCEP which has a column name school_code. I have been assigned a task to update the old school_code vale ( ADSCHL) with new school_code ( TESTCEP) and make sure the changes happen across all 3 tables.
I tried using Merge Update function not sure if this is going to work.
Update dbo.ADSCHL
SET dbo.ADSCHL.SCHOOL_CODE = FD.SCHOOL_Code
FROM dbo.ADSCHL AD
INNER JOIN TESTCEP FD
ON AD.SCHOOL_NAME = FD.School_Name
Is it possible to check/notify if something (record) has changed in the linked table (from linked server) and automatically update table in local one?
View 4 Replies View RelatedI have a daily record table (has field Date1, field2Update) and have another table(has field Date2, Flag (value: 0 and non 0 values)
I want to update table1 and set field2Update as somevalue where table2.Flag <> 0
Matrix table has ID column and data below.
ID Flag TestDate Value Comment
111 2 12/15/2014 7.5 null
222 2 Null 10 received
Matrix_Current table could have 1 or multiple rows as below.
ID Flag TestDate Value Comment
111 2 01/26/2015 7.9
111 2 02/23/2015 7.9
111 2 04/07/2015 6.8
222 1 null 8 test comment 1
222 3 null 9 test comment 2
When I run below update
UPDATE AM
SET M.Flag = MC.Flag, M.TestDate = MC.TestDate,
M.Value = MC.Value, M.comment = MC.Comment
FROM dbo.Matrix M inner join dbo.Matrix_Current MC on M.ID = MC.ID
Matrix table has value below:
ID Flag TestDate Value Comment
111 2 01/26/2015 7.9
222 1 Null 8 test comment 1
I want to update Matrix table from all row from Matrix_Current, final table would like below:
ID Flag TestDate Value Comment
111 2 04/07/2015 6.8
222 3 Null 9 test comment 2
How to update tblA with records from tblB (see below expected results) when they have common column DrawingNo?
View 4 Replies View RelatedI have two table i want to update one table using other table.query given below
--table 1
create table #temp_P
(P_id int null,
p_name varchar(50),
h_id int)
--table 2
which is to be updated,check the p_name from above table( like 1 has same name like 4 so 1 will replace by 4)
create table #temp_t
(t_id int null,
p_id varchar(50),
r_id int)
[code]...
I have a table where table row gets updated multiple times(each column will be filled) based on telephone call in data.
Initially, I have implemented after insert trigger on ROW level thinking that the whole row is inserted into table will all column values at a time. But the issue is all columns are values are not filled at once, but observed that while telephone call in data, there are multiple updates to the row (i.e multiple updates in the sense - column data in row is updated step by step),
I thought to implement after update trigger , but when it comes to the performance will be decreased for each and every hit while row update.
I need to implement after update trigger that should be fired on column level instead of Row level to improve the performance?
I have two tables A(uname,address,full_name) and B(uname,full_name). I want to update table A for all matching case of uname in table B.
View 5 Replies View RelatedI am trying to do a simple update in one sql table from another where a certain condition in both tables are met.I am missing something basic and have tried numerous posted examples, without success.Here is my code (that does not update) :
opdragaliasnaaminsit.Connection = konneksie
opdragaliasnaaminsit.CommandText = "UPDATE vyfjaarontledings " & _
"SET aliasnaam = T2.aliasnaam" & _
" FROM vyfjaarontledings T1" & _
" INNER " & _
"JOIN blokke T2 " & _
" ON T1.plaasno = T2.plaasno " & _
"WHERE T1.plaasno = T2.plaasno"
opdragaliasnaaminsit.ExecuteNonQuery()
I am trying to update aliasnaam in vyfjaarontledings from blokke.
I have two tables i have to update table2 using table1 without using while loop.
example given below.
Table1
rid
id
amt
firdate
lastdate
1
1
500
[code]....
I have following T-SQL statement:-
insert into [dbo].[tbl_FG_Alert_Count_All_Report] ([Date] ,[Count] ,[Rule Type])
SELECT TOP 10 [Date]
,[Count]
,[Rule Type]
FROM [dbo].[tbl_FG_Alert_Count_All] where Count <>'0' and DATEDIFF(dy,date,GETDATE()) = 1 order by Date desc
When I ran this T-SQL statement in SSMS; I don't get any error and as expected, I can see new data in [dbo].
[tbl_FG_Alert_Count_All_Report] table.
Now I created one job with same T-SQL Statement. Job completes successfully with out giving any error message; But unfortunately I don't see any new data in [dbo].[tbl_FG_Alert_Count_All_Report] table. What would be the reason that I don't see new data when job completes successfully but I can see new data after executing same T-SQL statement in SSMS?
Every day the timestamp is changed on all rows in one of the table(table has 1 mio records).
What is the best way to find out which query is doing this?
Could be also query which updates only one record(or couple of them) but is executed for each record once.
I have been looking sys.dm_exec_query_stats and sys.dm_exec_sql_text for past but couldn't find.
I can't use event notifications since there is service broker disabled.
I am having challenge to update the redemption table from the multiple card activation table. I want to update the redemption table with the activation date closest to the redeem date.
For example: Redeem date 20071223, I need to update the top row Date, Year, Period fields from the Card activation table.
Redeem date 20071228, I want to refer to the second row in the Card activation table date 20071228.
Redeem date 20080316 or later, I want to use the last row in the card activation table date 20080316.
How to modify the update query to select the right activation row accordingly?
Below is my partial code I used but it always pick the 20071223 date to update my redemption table.
CREATE TABLE #Card
(
[CardNumber] varchar(20)
,[ Date] int
,[ Year] int
,[ Month] int
,[ Period] int
)
[Code] ....
I upload data from a Txt File(Txt_Temp) where I have VinNumber with 6 digits. Another table name Resrve_Temp1 where I have Vinumber with 17 digit. Now I need to update the vinnumber 6 digit to 17 digit or to new column in Txt_temp.
Txt_Temp - Table
I tried this code with no succes and only one row is updating
update Txt_Temp Set Txt_Temp.Vinnumber=dbo.R_ResrvStock.Vin
from dbo.R_ResrvStock inner join Txt_Temp on Right (dbo.R_ResrvStock.Vin,6)=Txt_Temp.VinNumber
OR Add this code in view
Select dbo.R_ResrvStock.Vin,R_Txt_Temp.Vinnumber,R_Txt_Te mp.Model_Code
from dbo.R_ResrvStock inner join R_Txt_Temp on Right (dbo.R_ResrvStock.Vin,6)=R_Txt_Temp.VinNumber
Vin
123456
123123
123789
Resrve_Temp1 - Table
asddfghjklk123654
asddfghjklk123456
asddfghjklk321564
asddfghjklk123123
asddfghjklk123789
asddfghjklk654655
asddfghjklk456465
My Result can be in Txt_Temp table or new table or with one or two columns
asddfghjklk123456 123456
asddfghjklk123123 123123
asddfghjklk123789 123789
I have table A with colums ID and Product. I have table B with ID (same as table A) and revenue of product.
I need to update the field Product of table A with the revenue of table B.
I'm confuse with the update joining both tables. I tried this, but obviously has an error:
Update A set Product=B.Revenue where A.ID=B.ID
I need to update more than one record at once. I have ~ 100 records that I have to update and don't want to execute query 100 times.
My query looks like this:
Update Table1
Set Table1.field1 = ( select Table2.field1 from Table2 where Table2.field2 IN ('a', 'b', 'c')
where Table1.field2 IN ( 'a', 'b', 'c')
It obviously failed because subquery returned more than one value and error message stated that I can't use '=' operator in this case.
My question: how could I update the same column from many records in one execution?
I have been wrestling with the code all day to accomplish the following: I need to update a table based on values from another table. So far, I have been able to do the below:
DECLARE @LookUpTerm VARCHAR(25)
, @SearchCol VARCHAR(255)
, @LogonIDToProcess VARCHAR(50)
, @Matched CHAR
, @Cycle INT = 1
IF OBJECT_ID('tempdb..#Glossary','U') IS NOT NULL DROP TABLE #Glossary
IF OBJECT_ID('tempdb..#Employees','U') IS NOT NULL DROP TABLE #Employees
[code]...
I have a table with the following fields:
ID (int, identity)
Name (nvarchar(255))
Block (nvarchar(50))
Street (nvarchar(255))
Floor (nvarchar(50))
Unit (nvarchar(50))
Address1 (nvarchar(255))
Address2 (nvarchar(255))
I want to iterate through the table and populate Address1 as [Block] [Street] #[Floor]-[Unit].If the 'Floor' field contain a number < 10 (e.g., '8'), I want to add a '0' before it (e.g., '08'). Same for Unit.How would I do this using cursors (or other recommended method)?
I am dynamically creating a job using sql script and it does work fine(It creates the job and when it's done it gets deleted as it's created dynamically. so I won't be having any job history at all in the system.). I want to update an existing table if the jobs fails and I am not sure how I can do that using t-sql script. Is that possible?I have an idea but not sure whether it works. In the job create script, can I include the code for if the job fails then go to step 2 and update the table column with the error??? If so, how can I retrieve the error???
View 3 Replies View RelatedI want to update the STATUS column based on min date in my table.
For example – If minimum BOOKING_DATE of any RecieptID is below to 2015-10-01, then Status of that RecieptID should be 0 for all records pertaining to dedicated RecieptID So I need an output in this way.
I'm trying to Update a column table based on values from another table but I need these values are random.My query looks like this and doesn´t work
DECLARE @Rowini int,
DECLARE @lastrow int
SET @Rowini = 1
SET @Lastrow = 80000
[code]...
I have 3 columns. I would like to update a table based on job_cd and permit_nbr column. if we have same job_cd and permit_nbr, reference number should be same else it should take max(reference number) from the table +1 for all rows where reference_nbr column is null
job_cd permit_nbr reference_nbr
ABC1 990 100002
ABC1 990 100002
ABC1 991 100003
ABC1 992 100004
ABC1 993 100005
ABC2 880 100006
ABC2 881 100007
ABC2 881 100007
ABC2 882 100008
ABC2 882 100008
I have been tasked with writing an update query to update a table with more than 150 million rows of data. Here are the table structures:
Source Tables :
OC
CREATE TABLE [dbo].[OC](
[OC] [nvarchar](255) NULL,
[DATE DEBUT] [date] NULL,
[DATE FIN] [date] NULL,
[Code Article] [nvarchar](255) NULL,
[INSERTION] [nvarchar](255) NULL,
[Code] ....
The update requirement is as follows:
DECLARE @Counter INT=0 --This causes the @@rowcount to be > 0
while @@rowcount>0
BEGIN
SET rowcount 10000
update r
set Comp=t.Comp
[Code] ....
The update took more than 48h and didn't terminate , how to accelerate it ?
We have control table which will be useful whether we need to start the job or not. If we are starting the Job we will make it to 1.
Below is the Table Structure.
Table Name IN_USE_FG
CUST_D 0
PROD_D 0
GEO_D 0
DATE_D 0
Now we have different packages for 4 tables data loading. These 4 packages will start at a time. Before going to load the data we have to make the Flag to 1 and after that we have to load it. Because of this we have written Update statement to update the Value to 1 in respective Package.
Now we are getting dead lock because we are using same table at a same time. Because we are updating different records.
I am trying to build a DIM table using a source table that has the following setup...
CREATE TABLE [dbo].[APPL_STATUSES](
[APPLICATIONS_ID] [varchar](10) NOT NULL,
[POS] [decimal](10, 0) NOT NULL,
[APPL_STATUS] [varchar](5) NULL,
[APPL_STATUS_DATE] [datetime] NULL,
[APPL_APPLICANT] [varchar](10) NULL)
GO
[code]....
What I am trying to do is to break out the APPL_STATUS_DATE into a STATUS_START_DATE and an STATUS_END_DATE in a new table. I also need to be able to update the STATUS_END_DATE based on the previous day's date. Like so...
CREATE TABLE [dbo].[APPL_APPLICANT_STATUSES](
[APPLICATIONS_ID] [varchar](10) NOT NULL,
[POS] [decimal](10, 0) NOT NULL,
[APPL_STATUS] [varchar](5) NULL,
[STATUS_START_DATE] [datetime] NULL,
[STATUS_END_DATE] [datetime] NULL,
[APPL_APPLICANT] [varchar](10) NULL)
GO
[code]...
I want to create index for hash table (#TEMPJOIN2) to reduce the update query run time. But I am getting "Warning!
The maximum key length is 900 bytes. The index 'R5IDX_TMP' has maximum length of 1013 bytes. For some combination of large values, the insert/update operation will fail". What is the right way to create index on temporary table.
Update query is running(without index) for 6 hours 30 minutes. My aim to reduce the run time by creating index.
And also I am not sure, whether creating index in more columns will create issue or not.
Attached the update query and index query.
CREATE NONCLUSTERED INDEX [R5IDX_TMP] ON #TEMPJOIN2
(
[PART] ASC,
[ORG] ASC,
[SPLRNAME] ASC,
[REPITEM] ASC,
[RFQ] ASC,
[Code] ....
Hi,I have table with three columns as belowtable name:expNo(int) name(char) refno(int)I have data as belowNo name refno1 a2 b3 cI need to update the refno with no values I write a query as belowupdate exp set refno=(select no from exp)when i run the query i got error asSubquery returned more than 1 value. This is not permitted when thesubquery follows =, !=, <, <= , >, >= or when the subquery is used asan expression.I need to update one colum with other column value.What is the correct query for this ?Thanks,Mani
View 3 Replies View RelatedI have created a table as below mentioned. Then I want to alter the ID column as identity(1,1) without dropping the table as well as losing the data.
create table dbo.IdentityTest
(
id int not null,
descript varchar(255) null,
T_date datetime not null
)
I am looking for a Sql query to verify the inserted values from one table(in CSV file) with another table(in sql database)
For example: I have below Values column that is present in once CSV file, after my data migration the values get stored in Results table under Message column.
I need to very whether values(1X,1Y) are inserted in Message record "successfully inserted value 1X"
Values (CSV)
1X
1Y
Results Table(SQL)
CreatedDate Message
2015-08-04 08:45:29.203 successfully inserted value 1X
2015-08-04 08:44:29.103 TEst pass
2015-08-04 08:43:29.103 successfully inserted value 1X
2015-08-04 08:42:29.203 test point
2015-08-04 08:35:29.203 successfully inserted value 1Y
2015-08-04 08:30:29.203 Test Pass
2015-08-04 08:28:29.203 successfully inserted value 1Y
If all values are inserted:
Output:
All values from values table are inserted successfully
Total count of values inserted: 2
If only few values are inserted, example only 1X from Values table is inserted in Message
Example:
Results Table CreatedDate Message
2015-08-04 08:45:29.203 successfully inserted value 1X
2015-08-04 08:44:29.103 TEst pass
2015-08-04 08:43:29.103 successfully inserted value 1X
2015-08-04 08:42:29.203 test point
Output:
All values from values are not inserted successfully in result table.
Total count of values inserted: 1
Missing Values not inserted in results table are: 1Y
convert my table(like picture) to hierarchical structure in SQL. actually i want to make a table from my data in SQL for a TreeList control datasource in VB.net application directly.
ProjectID is 1st Parent
Type_1 is 2nd Parent
Type_2 is 3rd Parent
Type_3 is 4ed Parent