How I can get the desired result using query. I don't want any
'@' variable in the result.
DECLARE @ST AS varchar(10)='AA'
DECLARE @desc AS int=8
DECLARE @STID AS int=4
DECLARE @PP AS int=63
DECLARE @SS AS int=22
/* Desired Result */
Update #RT Set ST='AA', desc=8, STID=4 Where PP=63 and SS=22
I have a stored procedure in which I'll select some rows based on a condition and I need to update the status of those rows within the same stored procedure.For e.g.
Create Procedure [dbo].[myProcedure] As BEGIN BEGIN TRAN T1 SET NOCOUNT ON SELECT TOP 5 * INTO #TempTable FROM myTable WHERE ENABLED = 1 AND FetchDate<=GetDate(); UPDATE myTable SET [Status] = 'Locked' From myTable Inner Join on #TempTable myTable.id = #TempTable.id; SELECT * FROM #TempTable; DROP Table #TempTable; COMMIT TRAN T1 END
The Stored Procedure works fine when I debug in SQL. I'm accessing the StoredProcedure through C# like this.
private ProcessData[] ReadFromDb(string StoredProcedure, SqlConnection Connection) { List<ProcessData> Data = new List<ProcessData>(); SqlCommand Command = new SqlCommand(StoredProcedure, Connection); Command.CommandType = System.Data.CommandType.StoredProcedure; try { Command.CommandTimeout = CONNECTION_TIMEOUT;
[code]....
The problem is I'm getting the required rows in C# but the update query in stored procedure is not working.
i am using visual web developer 2005 and SQL 2005 with VB as the code behindi am using INSERT command like this Dim test As New SqlDataSource() test.ConnectionString = ConfigurationManager.ConnectionStrings("DatabaseConnectionString1").ToString() test.InsertCommandType = SqlDataSourceCommandType.Text test.InsertCommand = "INSERT INTO try (roll,name, age, email) VALUES (@roll,@name, @age, @email) " test.InsertParameters.Add("roll", TextBox1.Text) test.InsertParameters.Add("name", TextBox2.Text) test.InsertParameters.Add("age", TextBox3.Text) test.InsertParameters.Add("email", TextBox4.Text) test.Insert() i am using UPDATE command like this Dim test As New SqlDataSource() test.ConnectionString = ConfigurationManager.ConnectionStrings("DatabaseConnectionString").ToString() test.UpdateCommandType = SqlDataSourceCommandType.Text test.UpdateCommand = "UPDATE try SET name = '" + myname + "' , age = '" + myage + "' , email = '" + myemail + "' WHERE roll 123 " test.Update()but i have to use the SELECT command like this which is completely different from INSERT and UPDATE commands Dim tblData As New Data.DataTable() Dim conn As New Data.SqlClient.SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Database.mdf;Integrated Security=True;User Instance=True") Dim Command As New Data.SqlClient.SqlCommand("SELECT * FROM try WHERE age = '100' ", conn) Dim da As New Data.SqlClient.SqlDataAdapter(Command) da.Fill(tblData) conn.Close() TextBox4.Text = tblData.Rows(1).Item("name").ToString() TextBox5.Text = tblData.Rows(1).Item("age").ToString() TextBox6.Text = tblData.Rows(1).Item("email").ToString() for INSERT and UPDATE commands defining the command,commandtype and connectionstring is samebut for the SELECT command it is completely different. why ?can i define the command,commandtype and connectionstring for SELECT command similar to INSERT and UPDATE ?if its possible how to do ?please help me
View 2 Replies View RelatedI want to calculate the Total_Cost and get the result of the formula from SELECT Query. Following is the formula of Total_Cost. I have declared variables for formula. How I can create SELECT/RUN query successfully for mathematical calculation to calculate the Total_Cost.
--Formula of Total_Cost = [min (price, Pay1) x Interest1 + max (min (price - Pay1, Pay2), 0) x Interest2 + Max ((price - Pay2), 0) x Interest3, LMT]
declare @price numeric(18,7)=255550
declare @Pay1 numeric(18,7)=645500
declare @Pay2 numeric(18,7)=235000
declare @Interest1 numeric(18,7)=0.05500
declare @Interest2 numeric(18,7)=0.03533
declare @Interest3 numeric(18,7)=1.00000
declare @LMT numeric(18,7)=10000.00
Select [min (@price, @Pay1) x @Interest1 + max (min (@price - @Pay1, @Pay2), 0) x @Interest2 + Max ((@price - @Pay2), 0) x @Interest3, LMT] as Total_Cost
way to insert a summary row where there are no query results - in effect a row to say there were no results for today. I am using SQL Server 2008.
I have created a report which uses 2 tables to store all daily transactions & a one row summary of those daily transactions for upto 4 countries - both tables are updated nightly by 2 SP and the unique identifier is a field called ID which contains the country code and date;
table1_detail;
store all daily transactions for 4 countries and the unique identifier is an ID which stores the country code and date (XX_ddmmyy) eg GB_280513. There may be transactions for upto 4 countries(GB/FR/IE/DE) per day or there may be none.
Table1:
Code:
ID DATE CUST VALUE ERROR ...etc
GB_280513 280513 101 10.50 YES
GB_280513 280513 102 90.00 NO
FR_280513 280513 201 25.00 NO
IE_280513 280513 301 60.00 NO
FR_280513 280513 202 10.50 YES
FR_280513 280513 203 10.50 NO
GB_280513 280513 103 20.00 YES
GB_280513 280513 104 5.00 YES
table2_summary;
summary of daily transactions per unique identifier (XX_ddmmyy) in table1_detail. When there are transactions per unique identifier in table1 the SP inserts a row summarising quantity, value, error count etc.
Table2:
Code:
ID DATE NO OF TRANS VALUE NO OF ERROR ...etc
GB_280513 280513 4 125.50 3
FR_280513 280513 3 46.00 1
IE_280513 280513 1 60.00 0
I need the insert into table2_summary to be able to insert a row everyday for each country showing zeros where there were no transactions for that day (ID) in table1;
Table2 expected results:
Code:
ID DATE NO OF TRANS VALUE NO OF ERROR ...etc
GB_280513 280513 4 125.50 3
FR_280513 280513 3 46.00 1
IE_280513 280513 1 60.00 0
DE_280513 280513 0 0.00 0
When there are no transactions in table1 for a day (ID) then the summary needs 4 zero rows inserted.
Hi all,
I have this store procedure as follows:
Create Proc UpdateProblem@ProblemID int,@CompanyName varchar (50),@Firstname varchar (50),@Lastname Varchar (50),@Address varchar (50),@Postcode varchar (50),@City varchar (50),@Phone varchar (50),@Cutype varchar (50),@ProDescript varchar (50),@Sol varchar (50),@Email varchar (50)
as Update Problemset CompanyName = @CompanyName,Firstname = @Firstname,Lastname = @Lastname,Address = @Address,PostCode = @Postcode,City = @City,Phone = @Phone,Cutype = @Cutype,ProDescript = @ProDescript,Sol = @Sol,Email = @Email
where ProblemID = @ProblemID
when I test the querry
exec UpdateProblem10004, 'Toro AS','Mike','Tullas','Togo Street','G34 5TT','New York','06582531','Private','Machine is dead','Replace motherboard','goo@ht.com'
what happen is that when I ran the querry instead of updating the specifc row of 1004 the querry will just update the whole rows in the table with the same data.
Please help. I have set the ProblemID as the Primary key.
Update statement based on the results from this SELECT:
SELECT RELQ_REL_VERSION_NM,
RELQ_RELEASE_Q_ID,
RELQ_STATUS_CD,
RELSP_RELEASE_STEP_ID,
RELSP_STEP_TYPE_CD,
RELSP_STATUS_CD
FROM RELEASE_QUEUE WITH (NOLOCK)
[Code] ....
I need to update all records where the
RELEASE_STEPS.RELSP_STATUS_CD = 'SKPD'TORELEASE_STEPS.RELSP_STATUS_CD = 'CMPS'
I imagine that the UPDATE statement will be something like:
UPDATE RELEASE_STEPS SET dbo.RELEASE_STEPS.RELSP_STATUS_CD = 'CMPS'
WHERE (
SELECT RELQ_REL_VERSION_NM,
RELQ_RELEASE_Q_ID,
RELQ_STATUS_CD,
RELSP_RELEASE_STEP_ID,
RELSP_STEP_TYPE_CD,
[Code] .....
We have a issue with a MDS server that have been over us for a couple of days, the original error msg from SQL Server Engine is the one "The query processor could not produce a query plan" but the ones we get on the Excel-Addin are "Sequece contains no elements" or "The value cannot be null" T
• Using Microsoft SQL Server 2012 (SP1) - 11.0.3393.0 (X64) for 6months on this server without issues
• Two weeks ago we started to have 2 errors: "Sequence Contains No Elements" | "The Value Cannot Be Null"
• We are using the last version of Excel Add-in
• We try to reinstall the MDS feature
• If I backup/restore MDS database to other server it works
• We updated to SQL 2012 SP2 + CU4 but the error persisted ...
Looking at the MDSTraceLog we are routed to the this msg
SQL Error Debug Info: Number: 8624, Message: Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services., Server: bbdvsql03inst01, Proc: udpMetadataEntityGetDetailsXML, Line: 28
At line 28 udpMetadataEntityGetDetailsXML is calling udfMetadataEntityGetDetailsXML … and here is where we stopped
** Error found when try to get data from a entity using Excel add-in **
===================================
Sequence contains no elements
------------------------------
Program Location:
at Microsoft.MasterDataServices.AsyncEssentials.AsyncResultBase.EndInvoke()
at Microsoft.MasterDataServices.ExcelAddInCore.AsyncProviderBase`1.EndOperation(IAsyncResult ar)
[code]....
Hi Everyone:
*Before* I actually call up Microsoft SQL Customer Support Services and ask them, I wanted to ping other people to see if you have ever ran into this exact error
"Internal Query Processor Error: The query processor could not produce a query plan. For more information, contact Customer Support Services."
I would have searched the forums myself, but at this moment in time, search is broken :(
If anyone has run into this error before, what conditions would exist that this could happen? That is, if I can sniff this out with suggestions from the community, I would be happy to do so.
It is an oddity because if I alter a couple subqueries in the where clause [ i.e., where tab.Col = (select val from tab2 where id='122') ]to not have subqueries [hand coded values], then the t-sql result is fine. It's not as if subqueries are oddities... I've used them when appropriate.
fwiw - Not a newbie t-sql guy. ISV working almost daily with t-sql since MS SQL 2000. I have never seen this message before...at least I don't recall ever seeing it.
Thanks in advance for other suggested examination paths.
I have a stored proc which evaluates a table of 'tasks' to return the task with the highest priority for a given user - at the same time, once that task has been found - I want to allocate that user to the task.
I have created a stored proc that works...however I'm sure this requirement /pattern is common & I would like some best practice for this pattern of update and select within a transaction.
Here is some sample data:
use tempdb;
go
if OBJECT_ID('Tasks', 'U') is not null
drop table tasks;
go
create table tasks (
TaskId int identity primary key,
[Code] ....
And here's what my current stored proc looks like;
if OBJECT_ID('pGetNextTask', 'P') is not null
drop proc pGetNextTask;
go
create proc pGetNextTask (
@UserID char(10),
@TaskID int output
)
[Code] ....
I have a query that performs a comparison between 2 different databases and returns the results of the comparison. It returns 2 columns. The 1st column is the value of the object being compared, and the 2nd column is a number representing any discrepancies.What I would like to do is use the results from this 1st query in the where clause of another separate query so that this 2nd query will only run for any primary values from the 1st query where a secondary value in the 1st query is not equal to zero.I was thinking of using an "IN" function in the 2nd query to pull data from the 1st column in the 1st query where the 2nd column in the 1st query != 0, but I'm having trouble ironing out the correct syntax, and conceptualizing this optimally.
While I would prefer to only return values from the 1st query where the comparison value != 0 in order to have a concise list to work with, I am having difficulty in that the comparison value is a mathematical calculation of 2 different tables in 2 different databases, and so far I've been forced to include it in the select criteria because the where clause does not accept it.Also, I am not a DBA by trade. I am a system administrator writing SQL code for reporting data from an application I support.
I have a column colC in a table myTable that has a value (e.g. '0X'). The position of a non-zero character in column colC refers to the ordinal position of another column in the table myTable (in the aforementioned example, colB).
To get a column name (i.e., colA or colB) from table myTable, I can join ("ON cte.pos = cn.ORDINAL_POSITION") to INFORMATION_SCHEMA.COLUMNS for that table catalog, schema and name. But I want to show the value of what is in that column (e.g., 'ABC'), not just the name. Hoping for:
COLUMN_NAME Value
----------- -----
colB 123
colA XYZ
I've tried dynamic SQL to no success, probably not executing the concept correctly...
Below is what I have:
CREATE TABLE myTable (colA VARCHAR(3), colB VARCHAR(3), colC VARCHAR(3))
INSERT INTO myTable (colA, colB, colC) VALUES ('ABC', '123', '0X')
INSERT INTO myTable (colA, colB, colC) VALUES ('XYZ', '789', 'X0')
;WITH cte AS
(
SELECT CAST(PATINDEX('%[^0]%', colC) AS SMALLINT) pos, STUFF(colC, 1, PATINDEX('%[^0]%', colC), '') colC
[Code] ....
I want to update the NewVol1 and NewVol2 in table #Rec2 from NewVol1 and NewVol2 of table #Rec1. It is some tricky because the value is NULL in some records of NewVol1 and NewVol2.
Update query. SAP, Code, Code1, Code2 and SAPdate are keyfield when join both table to update the NewVol1 and NewVol2 in table #Rec2 from NewVol1 and NewVol2 of table #Rec1.
Create table #Rec1 (SAP char(10), Code char(6), Code1 char(6), Code2 char(6), SAPDate datetime, NewVol1 char(20), NewVol2 char(20))
insert into #Rec1 values ('SATRIP','AAA','AA','A','2014-01-01','838.88484884',NULL)
insert into #Rec1 values ('SATRIP','AAA','BB','B','2014-01-01','839.88484884',NULL)
insert into #Rec1 values ('SATRIP','AAA','CC','C','2014-01-01','848.88484884',NULL)
insert into #Rec1 values ('SATRIP','BBB','AA','A','2014-01-01',NULL,'383.48377373')
insert into #Rec1 values ('SATRIP','BBB','BB','B','2014-01-01',NULL,'385.48377333')
insert into #Rec1 values ('SATRIP','BBB','CC','C','2014-01-01',NULL,'675.48377234')
[code]....
I am trying to add to a query to produce a report in Apex. Currently I have this
SELECT
RE_EZPAY_AT_AGENCY_DAILY.WAITING_TO_BILL AS "WTB",
VE_MEMBER.TITLE,
VE_MEMBER.FIRSTNAME,
VE_MEMBER.SURNAME,
VE_MEMBER.ADDRESS_1,
[Code] ....
I want to add 'OR FOLLOW_UP_DATE <= SYSDATE'. How do I add another OR statement?
I have a table A and lookup table B.
table A:
| ID | FRUIT | VEGETABLE | GOOD |
--------------------------------------------
| 1 | orange | cabbage | no |
| 1 | apple | lettuce | yes |
| 1 | kiwi | broccoli | no |
| 1 | pear | kale | yes |
table B:
| ID | FRUIT | VEGETABLE |
-------------------------------
| 1 | apple | lettuce |
| 2 | pear | kale |
If the fruit and vegetable in table A is found in table B, then set the GOOD column = yes, else no.
This is what I have so far.
update tableA
set GOOD =
(case when tableA.id = C.id then 'yes'
else 'no'
end
)
from
(select tableA.id as id
from tableA A
left join tableB B on B.fruit = A.fruit
and B.vegetable = A.vegetable) C
join three tables and wont be duplicate records.
I have tried and attached the computed results and also expecting results.
IF OBJECT_ID('tempdb..#tmpExam1')IS NOT NULL DROP TABLE #tmpExam1
IF OBJECT_ID('tempdb..#tmpExam2')IS NOT NULL DROP TABLE #tmpExam2
IF OBJECT_ID('tempdb..#tmpExam3')IS NOT NULL DROP TABLE #tmpExam3
[Code]....
I have created a sample Table with inserting below data,
ID Subject CreatedDate
1 Test 2015-09-20 22:59:07.373
2 Test 2015-09-21 09:16:58.290
3 Test 2015-09-21 09:18:17.500
I am loading a dropdown with Subject. The dropdown list shows the 3 items with same subject name since i have three records with same subject. I need a SQL select query for - if subject 'Test' is selected from the dropdown, need to be able to pull its corresponding associated ID from the table based on CreatedDate?
I'm trying to make a summary daily production report on the data below:Want to summarize the data with the sum of the Correct Weight between start and end date.
eg. of summary.
Recipe Name Total Weight
Hedge Shears - Lasher/kudu
500
Grass Slasher
200
eg.
But it needs to summarize when selected between start and end date.
RecipeName
CorrectWeight
CurDateTime
Weight
[code]....
I am trying to update my SQL table using an update query in powershell from an excel sheet.
The query is as follows,
#building name from excelsheet
$TCell=$reader.GetValue(8);
#update query is as,
$CreateScript1= "UPDATE $DestinationTable SET $DestinationTable.Phone = '$SCell' WHERE RoomNumber = '$FCell' and buildingname
like ''$TCell'%'"
I want to use like operator in the query to compare building name from excel sheet with the building name in sql table. I am facing an error in the highlighted part. I am not sure if my query is right or wrong.
I need a query to produce permutation combination.
declare @t2 as table (tab varchar(100))
insert into @t2 values ('V')
insert into @t2 values ('VL')
insert into @t2 values ('1099')
insert into @t2 values ('VOI')
declare @t1 as table (tab varchar(100))
insert into @t1 values ('I')
insert into @t1 values ('U') from the above I need following output (attached output),
Aim –To produce a unique line by month for the FDMSAccountNo
I have created the following query (see below) which produces the following result set
FDMSAccountNo AvgValCard_TypePence_Percentfee_wholesale_date BegMonthDate
8780000018820.012900000CreditPercent2009-07-082009-07-01 00:00:00.000
8780000018820.015700000CreditPercent2011-02-242011-02-01 00:00:00.000
8780000018820.014700000CreditPercent
2011-02-252011-02-01 00:00:00.000
SELECT
[FDMSAccountNo],
AVG([fee_retail_amt]*1.0) AS AvgVal,
Card_Type,
[Pence_Percent],
[fee_wholesale_date],
DATEADD(mm,DATEDIFF(mm,0,[fee_wholesale_date]),0) AS BegMonthDate
[Code] ....
Desired results
FDMSAccountNoAvgValCard_TypePence_Percentfee_wholesale_date
8780000018820.012900000CreditPercent2009-07-08
8780000018820.012900000CreditPercent2009-08-08
8780000018820.012900000CreditPercent2009-09-08
8780000018820.012900000CreditPercent2009-10-08
8780000018820.012900000CreditPercent2009-11-08
[Code] ....
I have the follwing function in my SQL data base which is hosted in Azure.
All date and time field in my db are store as UTC and I have a function define as below :
ALTER FUNCTION [dbo].[func_GetCurrentLocalTimeFromUTC]
(
)
RETURNS datetime
AS
BEGIN
DECLARE @OffSet as int = 1
DECLARE @CurrentDate as datetime = getUTCdate()
[Code] ...
Now what I have trying to do is to perform a select statement on a table where I have a dateTime value field and add the proper offset value to the field in order it is display based on where user will run the query. For example if I run this simple query :
SELECT INVENTORYDATE from Inventory
Will return the UTC dateTime value.
How can I use the select statement in order to get the field format with proper offset based on user pc timezone/. Please note that the query will be called from a rrs.
How Can I select Table Dynamically from in Side SQL Query
i.e.,
Select * from (Here I want Select the Dynamically from other Query)
I have been tasked with writing an update query to update a table with more than 150 million rows of data. Here are the table structures:
Source Tables :
OC
CREATE TABLE [dbo].[OC](
[OC] [nvarchar](255) NULL,
[DATE DEBUT] [date] NULL,
[DATE FIN] [date] NULL,
[Code Article] [nvarchar](255) NULL,
[INSERTION] [nvarchar](255) NULL,
[Code] ....
The update requirement is as follows:
DECLARE @Counter INT=0 --This causes the @@rowcount to be > 0
while @@rowcount>0
BEGIN
SET rowcount 10000
update r
set Comp=t.Comp
[Code] ....
The update took more than 48h and didn't terminate , how to accelerate it ?
Please help!!!!
Need to produce a query that show the cities and the number of people per city?
simple table
firstname
lastname
age
location
location shows the dif cities and the sql query will show cities will a count of people per city
how do you do this?
I'm using an SqlDependency so I'll get an alert when the data under a query changes. When the query does not meet the criteria spelled out here http://msdn2.microsoft.com/en-us/library/aewzkxxh.aspx then I immediately get a SqlNotificationEventArgs event with the "Invalid" note. This is good.
I would like to know that a query is invalid before I try it with my ASP.NET application. Is there a sproc I can give to my SQL developers so they can test that they haven't used any stuff that would invalidate SqlDependency? What I'm hoping is that there's already a system sproc which could be called...
exec sp_QueryInvalidForNotification "exec myTestSproc 99"
Does such a sproc exist? Or does anyone know how to write one?
I have a SELECT query that also needs to call a sproc with a column name passed in as a parameter.
Unfortunately I cannot use a TVF, as the sproc code references a TVF on a linked server.
What is the best option?
SELECT
u.UserID,
u.Username,
u.Address,
EXEC dbo.[GetResult] u.UserID AS 'Result'
FROM dbo.UserTests u
i want to select a data from a employee table and update that select data to attendlog1 table with match Eid
this is a employee data
EID----------bid
26478---------2
this is a attendlog data
EID-------------EBID
26478------------NULL
i want this type of result
EID-------------EBID
26478------------2
BID and EBID fields are change but values are same.
i am selecting the top 25 records from a table for processing. i would like to set the processstatus field to 3 as soon as i select the records.
is there a way to do this in one query?
Hi Friends,
I need a select query to identify how many records violate the basic dateformat, later on i update the junkdata with null.
Initially I have a database, in which one field(for Date) is given as Varchar, now as we know varchar accepts all types of data, when migrating the same data to another server, i am using Date as datatype for the new field and want to remove all other format's of data (Junk data) entered to that field and want to ratain only the general format i.e, MM/DD/YYYY or MM/DD/YYYY, this query should also support MM<=12, DD<=31
Regards,
Prasad K
I have a table with only one row to get unique ID-numbers. To get the nextID-number I have to increase the number in the row: first, get the numberfrom the database, and then do the update.Some ASP-code:Set rs = db.execute("SELECT id FROM tbl_id")id = rs("id")db.execute("UPDATE tbl_id SET id ="& id + 1 &"")This is not safe: two different sessions cat get the same ID.Is it possible to increase the value of id in tbl_id and get the value atthe same time? Or is there any other way?/matte
View 6 Replies View RelatedHI Guys,
I have two table t1 and t2
t1 has a,b,c columns(no primary key defined)
t2 has a,b columns (a is primary key)
I want to update the table t2 with follwin query
update t2 set b=(select avg(b) from t1 group by a) where a=(select a from t1 group by a)
Is it possible to update table of result of other query?
or give me other solution for that how can i do that thing...?
I want to create index for hash table (#TEMPJOIN2) to reduce the update query run time. But I am getting "Warning!
The maximum key length is 900 bytes. The index 'R5IDX_TMP' has maximum length of 1013 bytes. For some combination of large values, the insert/update operation will fail". What is the right way to create index on temporary table.
Update query is running(without index) for 6 hours 30 minutes. My aim to reduce the run time by creating index.
And also I am not sure, whether creating index in more columns will create issue or not.
Attached the update query and index query.
CREATE NONCLUSTERED INDEX [R5IDX_TMP] ON #TEMPJOIN2
(
[PART] ASC,
[ORG] ASC,
[SPLRNAME] ASC,
[REPITEM] ASC,
[RFQ] ASC,
[Code] ....