Transact SQL :: Same Query Returns Different Result?
Jul 13, 2015
I am facing a problem that following query give me different result whenever I execute the query, it returns me same number of records but not all the rows are same everytime it is executed.
Select[Field1]
From
(
SelectRow_number() Over(Partition By [Field2], [Field3] Order By [Field2], [Field3], [Field4] Desc) ID, *
From[dbo].[Table1]
) A
WhereID > 1
OrderBy [Field1]
Those highlighted in yellow colours are duplicate records, I need to remove one of them.
This is my syntax, and if I print the value that is stored in each variable @goodtries = 120 @badtries = 25 but when I run the syntax below it gives me 0.00
Declare @goodtries as int, @badtries as int select @goodtries = convert(decimal(18,4),count(userID)) from table1 WHERE logintype IN ('Valid', 'Success') select @badtries = convert(decimal(18,4),count(userID))
I have a query that returns material(items) that are used in an event on a certain day.
SELECT C.categoryName, count(I.itemID) AS InMission from items as I RIGHT JOIN Categories AS C on I.categoryID = C.categoryID INNER JOIN LinkMissionItem as LM on I.itemID = LM.itemID INNER JOIN Missions as M on LM.missionID = M.MissionID where '2015/12/19' BETWEEN M.freightLeave and M.freightReturn AND isReturned = 0 GROUP BY C.categoryName, C.categoryID ORDER BY C.categoryID
There are a total of 20 categories and I would like all the categories listed in the result even though there are no items booked in a mission. At the moment, I can only get the categories that have items in that category booked in a mission. I hoped that the RIGHT JOIN on the categories table would do the trick but it doesn't.
I have a column colC in a table myTable that has a value (e.g. '0X'). The position of a non-zero character in column colC refers to the ordinal position of another column in the table myTable (in the aforementioned example, colB).
To get a column name (i.e., colA or colB) from table myTable, I can join ("ON cte.pos = cn.ORDINAL_POSITION") to INFORMATION_SCHEMA.COLUMNS for that table catalog, schema and name. But I want to show the value of what is in that column (e.g., 'ABC'), not just the name. Hoping for:
COLUMN_NAME Value ----------- ----- colB 123 colA XYZ
I've tried dynamic SQL to no success, probably not executing the concept correctly...
I have a script that produce a result set that is almost complete. I have a new requirement come up to put a Total at the button of the result set of my Query.
I'm using SQL Server 2008 ;WITH CTE AS ( SELECT Case WHen left(MONTHDate,3)='Jan' Then '01' WHen left(MONTHDate,3)='Feb' Then '02' WHen left(MONTHDate,3)='Mar' Then '03' WHen left(MONTHDate,3)='Apr' Then '04' WHen left(MONTHDate,3)='May' Then '05'
I have some data which is vertical...I want to create a pivot query in SQL that will give me a result that is horizontal like this. I cannot find a way of doing it without lots of IF or CASE statements?
My stored procedure works perfectly when I run Query Analyser, but when I run my VB program I get the eror: I get the message : An SqlParameter with ParameterName '@total' is not contained by this SqlParameterCollection. Here is my stored Proc and my VB program is right below I- Stored Proc: CREATE PROCEDURE dbo.totalsub @account bigint,@total bigint outputASselect total=sum(SubPhnNmbr) from tblsub where SubAccNmbr=@accountreturnGO II- And my pogram in VB is: Dim totsub As Int64 Dim cm As New SqlCommand Dim cn As New MyConnection cn.open 'my connection is defined by me don't worry about it cm.CommandType = CommandType.StoredProcedure cm.CommandText = "totalsub" cm.Connection = cn Dim pm As SqlParameter pm = cm.Parameters.Add(New System.Data.SqlClient.SqlParameter("@Account", System.Data.SqlDbType.BigInt)) pm.Value = 100000165 pm = cm.Parameters.Add(New System.Data.SqlClient.SqlParameter("total", System.Data.SqlDbType.BigInt, 4)) pm.Direction = ParameterDirection.Output totsub = cm.Parameters("total").Value cm.ExecuteScalar() totsub = cm.Parameters("total").Value I also tried using @total instead of total and I tried ParameterDirection.ReturmValue instead of ParameterDirection.Output No Luck, someone pls can help
The following is my table whereby i have joined projects table with issue table (this is 1 to many relationship).
I have the following query: SELECT odf.mbb_sector sectorid,
SUM(case when odf.mbb_projecttype = 'lkp_val_appl' then 1 else 0 end) total_appl, SUM(case when odf.mbb_projecttype = 'lkp_val_infrastructure' then 1 else 0 end) total_infra, SUM(case when odf.mbb_projecttype = 'lkp_val_eval' then 1 else 0 end) total_eval, SUM(case when odf.mbb_projecttype = 'lkp_val_subproject' then 1 else 0 end) total_subprj, SUM(case when odf.mbb_projecttype = 'lkp_val_nonit' then 1 else 0 end) total_nonit, SUM(case when odf.mbb_projecttype = 'lkp_val_adhocrptdataextract' or odf.mbb_projecttype = 'lkp_val_productionproblem' or odf.mbb_projecttype = 'lkp_val_maintwoprogchange' then 1 else 0 end) total_others, COUNT(distinct prj.prid) total_prj
FROM PRJ_PROJECTS AS PRJ, SRM_PROJECTS AS SRM, ODF_CA_PROJECT AS ODF
LEFT JOIN RIM_RISKS_AND_ISSUES AS RRI ON RRI.pk_id = odf.id
WHERE prj.prid = srm.id AND srm.id = odf.id AND srm.is_active =1 AND odf.mbb_projecttype not in ('lkp_val_budget','lkp_val_itpc') AND odf.mbb_funcunit = 'lkp_val_operation'
GROUP BY odf.mbb_sector which returns me the following result : .
The problem is at the lkp_val_infosystem where it returns 3 instead of 1 in the total_infra column. How do I correct my case stmt to return the correct no of projects breakdown by different project type? Currently, only the total_prj which returns correct data.
Hi there everyone. I have a stored procedure called “PagingTable�? that I use for performing searches and specifying how many results to show per ‘page’ and which page I want to see. This allows me to do my paging on the server-side (the database tier) and only the results that actually get shown on the webpage fly across from my database server to my web server. The code might look something like this:
The problem is the stored procedure actually returns two result sets. The first result set contains information regarding the total number of results founds, the number of pages and the current page. The second result set contains the data to be shown (the columns specified). In ‘classic’ ASP I did this like this.
'Open the recordset rsItems.Open strSQL, conn, 0, 1
'Get the values required for drawing the paging table intCurrentPage = rsItems.Fields("CurrentPage").Value intTotalPages = rsItems.Fields("TotalPages").Value intTotalRows = rsItems.Fields("TotalRows").Value
'Advance to the next recordset Set rsItems = rsItems.NextRecordset
I am trying to do this now in ASP.NET 2.0 using the datasource control and the repeater control. Any idea how I can accomplish two things:
A) Bind the repeater control to the second resultset B) Build a “pager�? of some sort using the values from the first resultset
/*Subject: How to build a procedure that returns differentnumbers of columns as a result based on a parameter.You can copy/paste this whole post in SQL Query Analyzeror Management Studio and run it once you've made surethere is no harmful code.Currently we have several stored procedures which finalresult is a select with several joins that returns manycolumns (150 in one case, maybe around 50 the average).We have analyzed our application and found out that mostof the time not all the columns are used. We haveidentified 3 different sets of columns needed indifferent parts of the application.Let's identify and name these sets as:1- simple set, return the employee list for example2- common set, return the employee information (whichinclude the simple set)3- extended set, return the employee information (whichinlude the common set which itself includes the simpleset) + additional information from other tables, maybeeven some SUM aggregates and so on (I don't know forexample, how much sales the employee did so far).So the bigger sets contain the smaller ones. Please keepreading all the way to the bottom to better understandtechnically what we are trying.Here is a code sample of how our current procedureswork. Please note that the passing parameter we can eitherpass a Unique Identifier (PK) to retrieve a single record,or if we pass for example -1 or NULL we retrieve all theemployee records.*/create table a ( apk int primary key, af1 int, af2 int, af3 int, af4int, af5 int, af6 int)create table b ( bpk int primary key, bf1 int, bf2 int, bf3 int, bf4int, bf5 int, bf6 int)create table c ( cpk int primary key, cf1 int, cf2 int, cf3 int, cf4int, cf5 int, cf6 int)create table d ( dpk int primary key, df1 int, df2 int, df3 int, df4int, df5 int, df6 int)insert a values (1,1111,1112,1113,1114,1115,1116)insert a values (2,1211,1212,1213,1214,1215,1216)insert a values (3,1311,1312,1313,1314,1315,1316)insert a values (4,1411,1412,1413,1431,1415,1416)insert a values (5,1511,1512,1513,1514,1515,1516)insert a values (6,1611,1612,1613,1614,1615,1616)insert b values (1,2111,2112,2113,2114,2115,2116)insert b values (2,2211,2212,2213,2214,2215,2216)insert b values (3,2311,2312,2313,2314,2315,2316)insert b values (4,2411,2412,2413,2431,2415,2416)insert b values (5,2511,2512,2513,2514,2515,2516)insert b values (6,2611,2612,2613,2614,2615,2616)insert c values (1,3111,3112,3113,3114,3115,3116)insert c values (2,3211,3212,3213,3214,3215,3216)insert c values (3,3311,3312,3313,3314,3315,3316)insert c values (4,3411,3412,3413,3431,3415,3416)insert c values (5,3511,3512,3513,3514,3515,3516)insert c values (6,3611,3612,3613,3614,3615,3616)insert d values (1,4111,4112,4113,4114,4115,4116)insert d values (2,4211,4212,4213,4214,4215,4216)insert d values (3,4311,4312,4313,4314,4315,4316)insert d values (4,4411,4412,4413,4431,4415,4416)insert d values (5,4511,4512,4513,4514,4515,4516)insert d values (6,4611,4612,4613,4614,4615,4616)gocreate procedure original_proc @pk int asif @pk = -1set @pk = nullselecta.af1, a.af2, a.af3, a.af4, b.bf1, b.bf2, b.bf3, b.bf4, c.cf1, c.cf2,c.cf3, c.cf4, d.df1, d.df2, d.df3, d.df4fromajoin b on a.apk = b.bpkjoin c on b.bpk = c.cpkjoin d on c.cpk = d.dpkwherea.apk = ISNULL(@pk, a.apk)goexec original_proc 1go/*Currently the above SP is a single SP that is basicallyreturning ALL possible needed data. However most of thetime we might need to call and retrieve a simple employeelist.So we thought about modifying the stored procedure byadding an extra parameter that will indicate which setof columns to return.For modifying the stored procedure in order to get avariable name of columns returned and avoidingrepeating code, we built 4 objects: the storedprocedure being called, one table function and 2 views.One table function so that we are able to pass a parameter.The views since they do not accept parameters they arealways joined at least with the inline table function.The stored procedure generates in its body a dynamicSQL statement, where it queries the table function andthe views, depending which set is required. Here is acode sample of our current design (you need to run theprevious code in order for this to work).*/create function _1_set(@pk int)returns tableas return(select a.apk, a.af1, a.af2, a.af3, a.af4, b.bf1, b.bf2from ajoin b on a.apk = b.bpkwhere a.apk = ISNULL(@pk, a.apk))gocreate view _2_set asselect b.bpk, b.bf3, b.bf4, c.cf1, c.cf2from bjoin c on b.bpk = c.cpkgocreate view _3_set asselect c.cpk, c.cf3, c.cf4, d.df1, d.df2, d.df3, d.df4from cjoin d on c.cpk = d.dpkgocreate procedure new_proc @pk int, @set int asdeclare @sql nvarchar(4000)if @pk = -1set @pk = nullset @sql = 'select * from _1_set(@pk) fs 'if @set 1set @sql = @sql + 'join _2_set ss on fs.apk = ss.bpk 'if @set 2set @sql = @sql + 'join _3_set ts on ss.bpk = ts.cpk 'exec sp_executesql @sql, N'@pk int', @pkgoexec new_proc 1, 3go/*For executing the new procedure, we pass parameter 1for the smaller set, 2 for the medium size set or 3for the complete set.For example when we want to retrieve the common setwe pass the Unique Identifier of the employee to theSP and then we pass the type of set we want to useas the second parameter (1 for simple set, 2 forcommon set and 3 for extended set).The SP has the IF and dynamic SQL to add more JOINs.We would like to know what you think of this approachand if you know a simpler way of doing it.For cleaning up the test objects run the following code.*/drop procedure original_procdrop procedure new_procdrop function _1_setdrop view _2_setdrop view _3_setdrop table adrop table bdrop table cdrop table dAs always I would appreciate any feedback, opinion,comments, ideas and suggestions.Thank you
com.microsoft.sqlserver.jdbc.SQLServer Exception: A server cursor cannot be opened on the given statement or statements . Use a default result set or client cursor.
If a SP doesnt have a temp table, then there is no issue, SP executes perfectly, but if a SP has a temp table, this error occurs.
SP :
create proc testProcedure @countrCode varchar(3) as
select countryname INTO #TMPCOU from country where countryCode = @countrCode SELECT COUNTRYNAME FROM #TMPCOU
I have a query that based 2 tables. I wrote a query with a left join on the base table but the result set returns multiple rows for each occurrence in the second table because of the left join. I want but to return all records from on table A and only matching records from table B which id but I would wan tit to keep return them vertically as the because it make it difficult to read when put in a spreadsheet. It want it to return the values horizontally so the rows are not increasing for each occurrence on table b.
HI, I ran a select * from customers where state ='va', this is the result...
(29 row(s) affected) The following file has been saved successfully: C:outputcustomers.rpt 10826 bytes
I choose Query select to a file then when I tried to open the customer.rpt from the c drive I got this error message. I am not sure why this happend invalid TLV record
As the topic suggests I need the end results to show a list of shows and their dates ordered by date DESC. Tables I have are structured as follows:
SHOWS showID showTitle
SHOWACCESS showID remoteID
VIDEOS videoDate showID
SQL is as follows:
SELECT shows.showID AS showID, shows.showTitle AS showTitle, (SELECT MAX(videos.videoFilmDate) AS vidDate FROM videos WHERE videos.showID = shows.showID) FROM shows, showAccess WHERE shows.showID = showAccess.showID AND showAccess.remoteID=21 ORDER BY vidDate DESC;
I had it ordering by showTitle and it worked fine, but I need it to order by vidDate. Can anyone shed some light on where I am going wrong?
We run std 2008 r2. I haven't looked at my friend's function closely yet bur he showed me that when he selects from the function with one column and the same where clause he uses on same func with select *, he gets no data under the column he requested.
But when he selects * he gets a single row.
I took a peek and see a bunch of left joins followed by a bunch of outer applies in his func. I suppose (thinking out load) if anything random like the order of rows returned or sql decisions on how query runs can affect his function, that might explain it.
SQL Ver: 2008 (not r2) Problem: The following code returns correct results when moving variable declarations and update statement outside a stored procedure, but fails to return a value other than zero for the "COMPANY TOTAL" records. The "DEPT TOTAL" result works fine both in and outside the sp.This may have to do with handling NULL values since I was getting warning message earlier involving a value being eliminated by an aggregate function involving a NULL. I only got this message when running inside the sp, not when running standalone. I wrapped the values inside the SUM functions with an ISNULL, and now return a zero rather than NULL for the "COMPANY TOTAL" records when running inside SP.All variable values are correct when running.
SQL CODE: DECLARE @WIPMonthCurrent date = (SELECT TOP 1 WIPMonth FROM budxcWIPMonths WHERE ActiveWIPPeriod = 'Y') select @WIPMonthCurrent as WIPMonthCurrent
I've written sql code which takes a date and finds the Last Day of the Month one year ago. For example, it takes the date '2015-04-17' and returns the date '2014-04-30'. The code works fine in a query. Now I'm trying to turn this into a function. However, when I try to create the function I get the error:
Operand type clash: date is incompatible with int
Why is this error being returned?
Here is my function:
CREATE FUNCTION dbo.zEOM_LY_D(@Input Date) RETURNS date AS BEGIN; DECLARE @Result date; SET @Result = convert(DATE, DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,dateadd(m, -11, @Input)+1),0)),101) RETURN @Result; END;
We have multiple employees assigned to the same assignment sometimes, and my query is skewed as that if there are 2 people assigned to the ssame assigment I can only see the amt of time worked for the 1st person. What should I do to remedy this?
I created a view which gave me the TOP1000 Companies we do consulting work for.
It includes their name, rank, year, companyID. I wanted to then link this view to the address table. I was able to do this, but because one company might have multiple addresses my result set was large when I started out by just adding city to my view. How can I take my result set and just choose the first DISTINCT value in the result set? Here's an example of the result set:
Name Rank Year CompanyID City
Bill's Fish 22 2015 779 Sunrise Bill's Fish 22 2015 779 Billings
select name,number,city from student where name='abcd' now name='abcd' is not there in student table so result is no record.
I need record for this query, all the columns as null or empty. how to do this one? Because am using this query in report so this query as null or empty i will replace as 0 for rows.
I need a query to publish the front page of a blog. Each blog post needs to show BlogTitle, BlogText, PublishDate, PublishBy, Primary Image and number of comments. I would like to be able to do this in one sql statement, if possible.
The table structure is below, you can assume the first image returned from the image table is the primary image.
Periodically throughout the day a report is manually pulled from a SQL Server database. Is their a way w/o me adding a field to the database to have the result set return the "new" results? For example, lets say this is our DDL
Create Table OneTwoThree ( id int ,date11 datetime ,firefly varchar(10) )
Prior I could use this syntax, but that was only with needing to generate 1 result set.
Select id, convert(varchar(10), date11, 101) As [Date], firefly from onetwothree where CONVERT(varchar(10), date11, 101) < CONVERT(varchar(10), GetDate(), 101)
Looking at my datetime values, let's say the 1st was generated at 18:45, obviously the 1st two records in the table would be returned. And let's say a 2nd time I need to generate I want to exclude the 1st two entries as they have already been verified. How can I do such w/o adding a field to the table?
When I was using a simple query using select statement with where clauses, I can get the results. When I use AND to specify more conditions. It returns no row even though I get the result when query seperately. What should be the possible cause of this. I am using SQL Server 6.5. Thank you
I am tying to join tables to get the result but it is not showing any data,i have shipping address column in both tables I want to show data in single column I don't know how to display.
select r1.ProductID,r1.ProductName,r1.PMNO ,r.ShippingInfo,r.ShippingAddress ,rs.ShippingAddress from R2InventoryTable r1 inner join RecycleComponents1Table r on r1.ProductID=r.ProductID inner join ReSaleorReStock1Table rs on r1.ProductID=rs.ProductID where r1.HazMat='No' order by ProductID
If I join two tables it is showing data
select r1.ProductID,r1.ProductName,r1.PMNO ,r.ShippingInfo,r.ShippingAddress from R2InventoryTable r1 inner join RecycleComponents1Table r on r1.ProductID=r.ProductID
I have a criteria where i want to join table 1 with table 2 , table 1 consists of products which were given to salesman to sell and table 2 has the sales data which salesman has sold out. Now i want to know left over products of each sales with join .Below is my data, here is what i am trying to do, but it return only salesman 1 data.
CREATE TABLE Salesman_Product ( SalesManID int, ProductID int ) INSERT INTO Salesman_Product (SalesManID,ProductID) Values (1,1),(1,2),(1,3),(1,4) INSERT INTO Salesman_Product (SalesManID,ProductID) Values (2,1),(2,2),(2,3),(2,4)
I use new query to execute my store procedure but didnt return any value is that any error for my sql statement??
USE [Pharmacy_posicnet] GO /****** Object: StoredProcedure [dbo].[usp_sysconf] Script Date: 22/07/2015 4:01:38 PM ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER procedure [dbo].[usp_sysconf]
I have a query to check the records of job has received after 4pm Monday to Friday and it has completed before 9am next day and also weekend it should be Friday after 4pm and before Monday 10am for particular financial year period. I have my job table which has full date but it doesn't show the date exactly Monday to Friday it shows only as 12-12-2014 like that.
I am trying to compare Sales value of year 2015 with sales value of 2016 and the difference stored in alias column as Sales_growth for year 2016 , for year 2015 the alias column be as '1' similarly difference between margin of 2015 and 2016 and result stored in alias column as margin_rate in year 2016for 2015 as 1 but when there is no record for year 2015 and record present in 2016 for a given (month, SM,SG,CUST,SP) then the alias column sales_growth and margin_rate should be 100
last record : as there is no record for year 2015 and record present in 2016 for a given (month, SM,SG,CUST,SP) then the alias column sales_growth and margin_rate should be 100
