How to find the list of queries currently running in the Database with User Login Information.
Since my database application is running slow, to find the slow queries.
Hi
I'm trying to create a login (Sql Server 2005) that can only connect from a specified host. Im sure this is
possible but i cant seem to find the option anywhere.
eg. a login that can only connect from localhost or maybe an address range like 192.168.0.%.
Thanks
How to find out the list of all tables and views owned by a particular user in any database by querying the system tables?Thanks.
View 2 Replies View Relatedhi my local host cannot open the connection to my database, whilst testing with vwd seems to be able to do this? other server side functions work (response.write("hello world"))
in my iis the version of .net it says its running reads: 2.0.50727, though when i go to add / remove programmes i have 3.5 there? maybe its nothing to do with .net versions?
thanks in advance for your help
pete
I need to search for such SPs in my database in which the queries for update a table contains where clause which uses non primary key while updating rows in table.
If employee table have empId as primary key and an Update query is using empName in where clause to update employee record then such SP should be listed. so there would be hundreds of tables with their primary key and thousands of SPs in a database. How can I find them where the "where" clause is using some other column than its primary key.
If there is any other hint or query to identify such queries that lock tables, I only found the above few queries that are not using primary key in where clause.
i'm using the Enterpirse library logger to write logs into a database.
When choosing connection string i choose the database i want in the "connection properties" dialog box and
push 'Test connection' button.
everything goes well.
then i open the SQL Server Management studio express and connect to the databse to check some things,
from that point on , when i push the 'Test Connection' button in the Enterprise library i get the error:
"cannot open user default database. Login failed. login failed for user My'server/MyuserName'"
even when i close the sql server manager , it is still stuck - the connection test doesn't work anymore....
it only work when i restart the computer.
why ?
Hi,
Im getting this error when attempting to retrieve data from an sql database.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Cannot open database requested in login 'projectAllocations'. Login fails. Login failed for user 'sa'.
Source Error:
Line 13: objConn = New SqlConnection( "Server=LAB303-066NETSDK; Database=projectAllocations; User ID=sa;Password=mypassword")
Line 14: objCmd = New SqlCommand("SELECT * FROM project_descriptions", objConn)
Line 15: objConn.Open()
Line 16: objRdr = objCmd.ExecuteReader()
Line 17: While objRdr.Read()
Source File: C:finalyearproject2sample.aspx Line: 15
Please Help!! Im a beginner to this, so if anyone knows the answer, take baby steps when explaining. Thanks
Been looking through the forums for a solution to this problem.I already tried granting access through statements such as:exec sp_grantloginaccess N1'machineNameASPNET'But they don't seem to work.. i vaguely remember seeing somewhere a DOS command line statement that grants access to the ASPNET_WP and that fixed my problem before on another computer.. but this is a new computer and i forgot to write down the command.Can anyone help explain and propose a solution to my problem. Many thanxs.
View 9 Replies View RelatedI am using the MSDE to connect to my ASP.NET application. I get this error after clicking the login button of my login page. Anyone know why this would happen?
Thanks for any help,
Cannot open database requested in login 'DataSQL'. Login fails. Login failed for user 'serverASPNET'.
how to find the names of the tables owned by the particular user in sql server and how to display the distinct object types owned by the particular user.
View 1 Replies View RelatedHi everyone,
I have an instance with many databases in it. I am looking for the easiest way to see which of those databases a user has a login on. What is the most efficient way of doing this?
Thanks,
Anil
Hi when i try and open a database in sql server management studio i get the error "Cannot open user default database. Login failed. Login failed for user 'DOMAINUser'. (.Net SqlClient Data Provider)", what can i do to rectify this, i have googled around and still havent found no answers.
View 4 Replies View RelatedI try to find out how many jobs where run in parallel on my server in an interval of time. For example: between 1:00 AM and 2:00 AM there were MAX 66 jobs that run in parallel and MIN 4 jobs. I am not sure if I can find this info out from a system view or I need to play with sysjobhistory view.
View 10 Replies View RelatedOur system administrator set up an NT server group in order to allowour users to login to our application via https to our sql server.The group appears as a User in SQL Server when you look at it inEnterprise Manager. That said, I can not see the users associatedwith the group from Enterprise Manager, but know they can login to thedatabase.The problem is this. When we login via the web we get access to thedatabase without problem, but when you look at the current_user whatyou see is the login Name the user entered and NOT the name of thegroup/User. That is to say, I can see a UserID which is not listed asa User in SQL Server and can't see the name of the group, which islisted as a user in SQL Server.I need to know who's logging in order to direct them to theappropriate web page via their role. Before the admin set up thegroup, I was using sp_helpuser to get the role, but then again I hadthe userID to do this.The question I have now, is there any way to see what thegroup/user is who logged in i.e. the goup listed as the User inEnterprise Manager? Otherwise I have to build a table of userIDs andtheir group/User name, which seems to defeat the purpose of having heserver authenticate users.Thanks,Tom
View 2 Replies View RelatedEarlier one of my team member has created a user login and password but forgot the password after few days and now we need to know the password of that login. Some of the application are using this login so we can delete and create a new login with the same name hence is there any possibility or script to find out the password of the existing login.
Note: The login is not 'sa'
Hey Microsoft: this affects development that will eventually sell a lot of seats on SharePoint Server 2007. If you guys and gals can't straighten out this mess, you can't expect custom solutions with custom web parts. So pay attention for your own good. Yes, SPS 2007 is what this is all about. I've created simpe web parts and deployed them, same VS 2005, but I need local development and debugging for more complex stuff. I'm really disappointed that you have no solution for this problem.
I've seen other posts on this, but the result seems to be the same: if you fix it, it's by accident, not by design.
1. I created a blank ASP.NET web site
2. I added a web part manager
3. I added a web part zone
I get the error described above. I have no idea why SQL Server settings are so screwed up.
I've tried all the stuff in the other posts - security settings, command line installation, etc. None of those worked.
The default template(s) don't copy anything into App_Data, nor create an empty folder. I don't know why that is. I have other web sites working just fine, but they use remote SQL databases, or local ones I created, and didn't need profile management (no forms authentication, no web parts, no web zones).
I've also started out with a local database, using SQL Authentication, later moving it to a remote server, and never had any problems. The SQL Server developer edition and Express seem to work just fine. I can also debug stored procs when the .mdf is in App_Data. So the problem isn't one of connectivity.
What would cause the default screw-up? This would seem to point from all directions to a problem with Visual Studio (2005)? The installation is defalt - perhaps some extras included (copy local), but nothing unusual. AJAX for ASP.net is installed, but not used in the above "default web site" trial. Likewise Syncfusion's tools, which work fine on other developer workstations at this same location, all of which are from the same image (purchased at the same time & imaged). That web parts work on other boxes, running all the same management tools (anti-virus, remote sys admin/sms etc.) makes none of those suspect.
I think Microsoft needs to have a clean problem solution and publish it. SP1 certainly doesn't fix it. What's worse is the stupid, lame error message. "I can't open the default database". Well, what did you try? What do you think the default is? What settings are you using? Why is there no debugging information other than the usual worthless trace information showing it's all deep within the ProviderBase and SqlClient namespace code? How is that supposed to be helpful?
If anyone has anything solid, not guesses, I'd like to know.
I have created table called Login in sql server where i have column usercode, email and login_date (login_date is datetime type)So, i created web application using .net. whenever user logged in, i am allowing based userLoged table and  i am inserting into login table.
login table usercode email    login_date
001      a@gmail.com   2015-11-18 22:02:41.153
001      a@gmail.com   xxx
.
.
.
I have another table called userLoged where i have column usercode,email and web_accessÂ
UserLoged table usercode email     web_access
001     a@gmail.com  Y
Now, if a@gmail.com (001) is not logged in for 45 days, i need to update web_access to be 'N' how to know if he /she not logged for 45 days.
Hi I have asp.net2 app using SQLExpress which works fine in VS2005.
When I compile it and try to run it from IIS on the same machine using the same
sql server database with:
connectionstring="server=.SQLEXPRESS;Database=abc.mdf;Trusted_Connection=yes"/>
I get the following error.
Cannot open database abc.mdf requested by login. The login failed. Login failed for user 'machinenameASPNET'
Any help much appreciated
Thanks
David
Hi all,
Iam getting this error
System.Data.SqlClient.SqlException: Cannot open database "XYZ" requested by the login. The login failed.Login failed for user 'xyz-abcASPNET'.
when trying to open the page....
http://localhost:1807/projectname/WebFormName.aspx
as
http://localhost/projectname/WebFormName.aspx
Couldnt figure out the solution.Please help
Soujanya
Hi, I have the following error logged in SQL Server's error log whenever I run a query on a particular database :
2002-01-04 22:54:02.46 spid11 Error: 823, Severity: 24, State: 1 2002-01-04 22:54:02.46 spid11 I/O error 1117(The request could not be performed because of an I/O device error.) detected during read of BUF pointer = 0x14eac480, page ptr = 0x73c94000, pageid = (0x1:0x158c89), dbid = 8, status = 0x801, file = d:mssql7datamydb.mdf..
2002-01-05 05:54:22.01 kernel SQL Server terminating because of system shutdown. 2002-01-05 05:54:22.14 kernel LogEvent: Failed to report the current event. Operating system error = 31(A device attached to the system is not functioning.).
and get this error in the Results pane of Query analyzer : Server: Msg 823, Level 24, State 1, Line 1 I/O error 1117(The request could not be performed because of an I/O device error.) detected during read of BUF pointer = 0x14ace4c0, page ptr = 0x35df6000, pageid = (0x1:0x44b73), dbid = 14, status = 0x801, file = d:MSSQL7DATAmydb.mdf.
Connection Broken
select @@version returns, Microsoft SQL Server 7.00 - 7.00.961 (Intel X86) Oct 24 2000 18:39:12 Copyright (c) 1988-1998 Microsoft Corporation Standard Edition on Windows NT 5.0 (Build 2195: Service Pack 2)
Books Online Help on Error 823 indicates that it is a disk problem and suggests that DBCC checkdb needs to be run on the database. But, hardware diagnostics on the server do not report any disk problems and dbcc checkdb also returns no errors.
Help on the cause of error 823 would be greatly appreciated. Thank you, Praveena
How to find last login date/time for user DML acitivity on databases on Instance?
Is there any way we can find our the last login date/time for databases?
Note: 1. We can find if the SQL Trace is running and store.This is not good solution
        2. Audit logins off/on is also not good solution.
       3. Using DMV's also not good option, if reboot sql server instance then historical values can not see.
hi,
so i have a new box and I'm trying to get my websites and SQL Server 2005 Standard Edition working on it, but the pages give me the following error when I try to load them:
"Cannot Open Database "XXXX" requested by login. The login failed. Login failed for user 'xxx'"
Everything seems exactly the same settings and user-wise from my old box to my new one, but nevertheless everything I've tried gives me the same error.
I've tried creating new users in SQL Server and giving them appropriate permissions to my database. I've even tried just using the built in 'sa' account. Nothing seems to change the error, except when I give it the incorrect password then it just says 'login failed'
This leads me to believe that i'm successfully logging into the SQL Server, but it doesn't want to give me access to the database I'm requesting access too. But "apparently" the account i'm using should have access to the database. If nothing else the 'sa' account should, but that didn't work either.
I'm stumped. Any ideas?
I Guys
I am trying to create an application that writes data to a SQL database (studio express).
The application works fine but as soon as I open the table with the SQL server management studio express the application does not work any more displaying the following message:
€œCannot open user default database. Login failed. Login failed for user€¦€?
If I siwtch off and on the computer the problem disappear till the table will be open with the database management studio express!!!!!
How can I solve this annoying problem?
Cheers
An general question.
A database table contains a textfield with queries. Is it possible to run them with another query.
Code:
----ID----|-------------SQL------------------
0 |"Select * from table0
1 |"Select * from table2 where x = 3
or so?
Does any one know? It would be nice if possible very dynamic but perhaps not so safe?
Suppose you have a simple DML "execute as..." trigger that looks like this:
CREATE TRIGGER dbo.myTrigger
 ON dbo.myTable
 WITH Execute As Owner
 AFTER INSERT
AS
[code]...
which runs as "owner" so that the user inserting into "myTable" won't have the privs to edit the audit table.How does one capture the identity of the user whose insert statement caused the trigger to fire? I've tried "current_user" and "system_user" without success when "execute as ..." is used: they each return a value not related to the identity of the user running the original insert.without an "execute as" clause, what prevents a user from adding to or editing the audit table directly?
Cannot open user default database. Login failed.Login failed for user
'NT AUTHORITYNETWORK SERVICE'. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: Cannot open user default database. Login
failed.Login failed for user 'NT AUTHORITYNETWORK SERVICE'. I have This Error When i try to log into My online web site, i have no idea how to fix it,one day it was working and the next it wasnt, is there any way to find out what database the default is and if it's either incorrect or not present change the web.config in a way that will make my system work. i have the NT Authority/Network Service in my Server Properties Permissions, its given the type login and is granted Connect SQL by sa i have 3 colder copies of the web site on my server my question is, how would i use of of these to restore the original site configuration is there a way to restore the original configuration to undo whatever it is i've done to break the system ChrisStressed
Hi, I'm new to SQL Express 2005.
I found information regarding : "Cannot open user default database. Login failed."on this forum but I think that in my case it's a bit different issue.
I have a website (ASP.NET 2.0) accessing DB, in the mean time Windows Service tries to update some data in the same DB (Service runs as NT AUTHORITYLOCAL SYSTEM). The second connection is rejected: "Cannot open user default database. Login failed.Login failed for user ....".
Problem occurs only when both: service and website are running at the same time. So service and website are running without problems when they are connecting DB exclusively.
My connection string is:
"Data Source=.SQLEXPRESS;AttachDbFilename="|DataDirectory|spider-lab.mdf";Integrated Security=True;User Instance=True"
I would be grateful if you can help me
Running a report on sqlserver RS 2008 R2 that uses a data source that looks at a database on a sql express 2012 server.
I can run the report in preview mode from bits on the sql 2008 r2 server.
I have tested the connection of the  deployed data source on the sql 2008 R2 reporting services web page and connection has been successful.
I can logon to sql express 2012 using  management studio and logon as the user and access the database run stored procedures etc.
windows server 2003, sql server 2008 R2 reporting services server.
windows server 2012 sql express 2012 data source database location.
How can we get most frequent queries that are running against to a table in our database?
View 3 Replies View RelatedIn SSMS, I connect Object Explorer to a partially contained database using a contained user login with password. This user has a database role of dbdatareader. When I try to expand the Tables in the database, I get the error:Â
The SELECT permission was denied on the object 'extended_properties', database 'mssqlsystemresource', schema 'sys'. (Microsoft SQL Server, Error: 229)
Is there a way to set permissions for the contained user so that this could be done?
Hi,
I'm sorry if this is simple, I'm no DBA but have been tasked with solving this problem...
We have a website that connects via ODBC to SQL Server (2k sp1) and at the moment I am getting back about every other time:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC SQL Server Driver][SQL Server]Cannot open user default database. Login failed.
So this is NOT happening every single time. Now I have seen Microsoft KB - 307864 and I can see that none of the databases are marked as suspect, the database I am trying to connect to does exist and is attached and, I have run the command to switch the database to multi-user mode.
The probable cause of this problem is that a while ago we had a hard-drive failure and I was forced to reattach some old datafiles (mdf,ldf) as the database. This seemed ok and I can view data etc in enterprise manager no problem.
I have checked for orphaned users and the user I am logging in with from the webpage is not listed.
So does anyone have a clue as to why this is happening, and more frustratingly for me, why is it only happening some of the time.
Thanks for your help, appreciated.
James.
Hi,
I was wondering if there was a SQL query I could run that would list all the current jobs in a SQL 2005 database? I would like to check to ensure a job exists before I call it, but was having trouble finding a way to determine if it existed.
Thanks for any advice!
-Flea#
As a part of DBA, I used to execute various SQL files. Most of the time, it is like a manual effort to execute the files individually.
I am looking to automate the process, like a single click to execute all the .SQL files.
The main hurdle I have is, some files needs to be executed in A1 database, some in B1 database and some other SQL files need to be executed in C1 database. In this scenario, I need to pass the DBName information to the powershell query dynamically.
My design for this requirement is, say each .SQL file need to contain a template like
@DBName = 'your Database name'
@Executeon = 'When to execute'
In this case, the powershell first need to read the SQL file and finds the value for @DBName and replace it in the powershell query and execute the SQL files automatically.
Is it feasible ? Or any other alternate easier way to proceed.