user data saved in db select distinct UserID,Name from Userss Where IsActive=1 and order by UserID and i want to just calculate no of days in month based on year and month name supplied by user. one way i can do it. first i will create a temporary table and in loop add many columns to that table and later dump user data to specific column.
I have a column which stores a set of dates. I want to tell how many days left of a date till it’s month end. It should be noted that month ends are taken from the date series, not a calendar month end.
I have two tables Costtable (Id,ResourceId, Amount,Date) and ResourceTable (ResourceId,Name) which shows output as below.
I want to show 0 amount for rest of the name in case of September. For e.g. if rest of the Resources does not appear in cost table they should appear 0 in amount
My Desired output
My current query
SELECT RG.Id AS Id, RG.Name AS Name, ISNULL(SUM(AC.Amount), 0) AS Amount, RIGHT(CONVERT(varchar(10), AC.[Date], 105), 7) AS [YearMonth]
I have a query that counts the number of pay checks received in a month, but I need to compare that to the number of actual paydays in a month. If we were on a set pay schedule (i.e. the 15th of each month) it would be easy. Unfortunately that's not the case. We are paid biweekly on Fridays and our last pay day was April 4th.
So I need to know how many pay periods were in a specified month. For example, April would have 2 (April 4th and 18th), May would have 3 (May 2nd, 16th, and 30th), etc.
I am trying to determine the amount of days in a month to prorate a month end estimate. We measure service calls and need to approximate how many we will have at month end. I would like to automate a query to post on our web and need to know how many days are in the current month.
A possible solution would be to piece together a datetime variable using getdate and dateadd then use a datepart. However , I don't know how to create a datetime variable this way.
I have 3 month of record in my table. if i pass 2 and 10, i need to select the record of between 2 and 10 days of record of every month. if i pass 10 and 20, it should select the record between 10 and 20 of every month. How to query for that?
I want to find the first weekend day, second weekend day, third weekend day and fourth weekend day per month using sql query. This is getting from recurring appointment. If weekdays = 65 means it accepts only saturday and sunday. So I want first, second, third and fourth weekend days for a month using query in sql server 2008...
I want to find out count of same UserID used within 7 days for that month.
For example, in below scenario, UserID 458's 1st TTo is 8/26/2015 and it used again on 8/28/2015 which is less than 7 so result should be 1. (DateDiff between 1st TTo and 2nd Tfrom should be less than 7) This is for month of Aug.
I am new to sql server query. I am trying to write a query for an application and I want user to enter number of over due days for payment.Below is my query and I am getting an error: An expression of non-boolean type specified in a context where a condition is expected, near 'Group'.
SELECT (P.FirstName+', '+P.LastName) As PA, Px.PRespDate,Px.DateFrom WHERE Px.Hide = 0 AND Px.Total <> Px.Payments AND Px.PRespDate IS NOT NULL AND PE.Hide = 0 AND PE.BillReady = 1 AND DATEDIFF(DAY, Px.DateFrom, PRespDate) LIKE 'Enter # of days |%% ' Group By (P.FirstName+', '+P.LastName), Px.PRespDate,Px.DateFrom
We have a stored procedure which currently accepts the following parameter: exec dbo.PurgeOldData <'yyyy-mm-dd'...We want to schedule this sp to run once a (first day of the month) going back to say today's date (or the date when this sp is called to run) minus 365 or purging 12 months data. Basically, the function should convert the today's date minus xxx number of days to yyyy-mm-dd so that the sp accept it as the correct parameter and purges the data successfully. So, if the sp is run on 2015-08-06, it will purge data going back to 2014-08-06 or earlier with the following parameter:
exec dbo.PurgeOldData <'2014-08-06'>
which means, all the data prior to the above date will be purged. Even the sp was run on 2015-08-06, the converted value of 2014-08-06' is entered as the sp parameter.
SQL express 2012. I am trying to case in the where part and having a syntax errors - This is what i am trying to do:
select all the days in week number x including last year if necessary... so if the year start not at the beginning of the week then look in last year as well ( for the same week number of this year and last week nu of last year)
declare @yyyy int = 2014,-- THE YEAR @mm int = 1,-- THE MONTH @week1No int = 1,-- THE WEEK NUMBER IN THE YEAR @week2No int = 37-- THE last WEEK NUMBER IN last YEAR select count(tblDay.start)-- tblDay.start IS smallDatetime
I am trying to case in the where part and having a syntax errors - this is what i am trying to do:
Select all the days in week number x including last year if necessary... so if the year start not at the beginning of the week then look in last year as well ( for the same week number of this year and last week nu of last year)
declare @yyyy int = 2014,-- THE YEAR @mm int = 1,-- THE MONTH @week1No int = 1,-- THE WEEK NUMBER IN THE YEAR @week2No int = 37-- THE last WEEK NUMBER IN last YEAR select count(tblDay.start)-- tblDay.start IS smallDatetime
I have a table which has name,Speciality,start date and end date. So each person may have 1/more rows .They will have more if they change their specialities. For example if you look at the data below.
AdjusterNameSpecialtyDatestartDateEnd Test Inside Property2009-08-29 2010-07-31 Test Management2010-08-012012-07-31
If we see at the data above Test has 2 rows because he changed his specialty in the middle.My requirement is to calculate the total number of employees in each month for last 2 years in each speciality. For example if we look at the example above, Test was in Inside property from 2009 Aug to 2010 Aug but if i use just the date start and take the month for each adjuster it gives me the number of adjusters started in that year and month but what i want is Test should be counted in all the months for Inside property until 2010 07 month. Which means i want to have the total number of adjusters present by each speciality for each month of last 2 years .
i'm trying to capture data for every hour and would like to display the hours of the day in a column.
select case when (datepart(hh,calldate) between 0 and 7AM then 1 else 0 end as [12-7AM], case when (datepart(hh,calldate) = 8 then 1 else 0 end as [8AM] from table1 where cast(calldate as date) = cast(calldate as date)
I made a select query which shows following output as shown in picture .
Now I want to add one more column in this query to show current bags and Bags in these 2 columns i want to show calculation like in first rows currentbags column (Receivedbags-DeleiveredBags) and in currentWeight column RecivedWeight+loss-gain-Deliverdweight) which is 1400 and 697.5 after that in secound row i want to add frist rows currentbags value+ second rows (Receivedbags-DeleiveredBags) and same in weight like daily stock register so output looked like below image
There is one more column common date according to which i have to make calculation like
rid commondate recdate recbags recweight loss gain delbags delwght
I'm wanting to create reports in SSDT 2012 which is connected to a 2008R2 database. I want to have parameters on for my reports where a user is able to select a year such as 2014. Unfortunate my table containing the data has two columns with a date value. the first is of the int type and contains an epoch formatted date. The second is a varchar type and shows the date as 2015-07-01 08:00:00. I would like to be able to write a query to return the year, monthnumber and daynumber from either of these columns.
I'm using SQL Server 2012 and I need to run a query against my database that will output the difference between 2 dates (namely, DateOfArrival and DateOfDeparture) into the correct month column in the output.
Both DateOfArrival and DateOfDeparture are in the same table (let's say GuestStay). I will also need some other fields from this table and do some joins on some other tables but I will simplify things so as to solve my main problem here. Let's say the fields needed from the GuestStay table looks like below:
I need my query to output in the following format:
I have a Users Table. It is full of users already and I would like to start using the UserPIN in the software (this is an nvarchar column).
I would like to update the UserPIN column with the row_number. All of my efforts have resulted in setting the UserPIN to 1 for every record. I just want an update query that fill the UserPIN column in sequential order.
I am pretty much brand new to reporting services so I apologize for any simple questions I may ask.
I have created a call report that shows data broken down by day and grouped by week. Everything works great. However, if there is no data on a certain day is does not show me that day on the report. Is there a way I can make it display the day even if there is not data for that day and just give me 0 values? Or do I need to modify my query?
Hi, I just want to know, is there anything more better solution than this one to find out the no of days in a month ? I have done this but I am not satisfied,anybody has a smarter solution? Plz comment..
My Solution :
/* check leap year*/ if year(getdate())%4<>0 set @noofdays=(select case month(getdate())-1 when 1 then 31 when 2 then 28 when 3 then 31 when 4 then 30 when 5 then 31 when 6 then 30 when 7 then 31 when 8 then 31 when 9 then 30 when 10 then 31 when 11 then 30 when 12 then 31 end ) else set @noofdays=(select case month(getdate())-1 when 1 then 31 when 2 then 29 when 3 then 31 when 4 then 30 when 5 then 31 when 6 then 30 when 7 then 31 when 8 then 31 when 9 then 30 when 10 then 31 when 11 then 30 when 12 then 31 end)
So Im trying to find the number of days in a certain month I know how I want to do but cant figure out how to code it
i want to take the first date of the getadate() and then ad a month then subtract 1 day and ill have the number of days in a month how would i code that?
I have 3 columns. I would like to update a table based on job_cd and permit_nbr column. if we have same job_cd and permit_nbr, reference number should be same else it should take max(reference number) from the table +1 for all rows where reference_nbr column is null
How can I calculate the no. of days in a month.I know it is a simple question but I am not able to find any code to calculate that. Can someone help me?
