In the above example, I want to swap Value 202 and 203 but its not straight forward. I want to swap in a way that, I need to group by Name column and check if 203 comes first in the group then swap else don't.
In the above example, I need to swap the values for name2 but not for name1. Below query is performing a straight forward swap.
UPDATE TblTest
SET Value
=
CASE
WHEN
Value
=202
THEN203
ELSE202
END
In a table I have some rows with flag A & B for a scode, some scode with only A and some are only B flags.
I would like to fetch all rows with flag A when both flags are present, no rows with B should be fetched. Fetch all rows when only single flags are present for a scode.How to achieve this using TSQL code.
I have the following variables VehicleID, TransactDate, TransactTime, OdometerReading, TransactCity, TransactState.
VehicleID is the unique vehicle ID, OdometerReading is the Odometer Reading, and the others are information related to the transaction time and location of the fuel card (similar to a credit card).
The records will be first grouped and sorted by VehicleID, TransactDate, TransactTime and OdometerReading. Then all records where the Vehicle ID and TransactDate is same for consecutive rows, AND TransactCity or TransactState are different for consecutive rows should be printed.
I also would like to add two derived variables.
1. Miles will be a derived variable that is the difference between consecutive odometer readings for the same Vehicle ID.
2. TimeDiff will be the second derived variable that will categorize the time difference for a particular vehicle on the same day.
My report should look like:
VehID TrDt TrTime TimeDiff Odometer Miles TrCity TrState 1296 1/30/2008 08:22:42 0:00:00 18301 000 Omaha NE 1296 1/30/2008 15:22:46 7:00:04 18560 259 KEARNEY NE
I am trying to audit data quality based on some defined data quality rules. The rules are stored in tables and processed using stored procedures. I am facing a problem while generating audits. Let's say I am trying to audit data in OrderDetail table. The table design is mentioned below...I inserted some sample data into the table using RedGate data generator.The audit table output I am expecting is as mentioned in the screenshot below
Its the PrimaryKeyAttributeValues column I am facing problems with. I am using STUFF function within a dynamic SQL query to get the primary key's as a list of comma separated values.
I'm stuck. I have a table that I want to pull some info from that I don''t know how to.
There are two colomuns, one is the call_id column which is not unique and the other is the call_status column which again is not unique. The call_status column can have several values, they are ('1 NEW','3 3RD RESPONDED','7 3RD RESOLVED','6 PENDING','3 SEC RESPONDED','7 SEC RESOLVED').
The call_id could be any number, I only want the 6 PENDING rows where there are other rows for that call_id which have either 3 3RD RESPONDED or 7 3RD RESOLVED. If someone knows how it would be a great help.
I need to swap two rows in a table so that i can give the user a choice to move the row data up and down. The top and bottom row values may not be in the serial order. I am using MS Sql 2000. Is there any way to do that or its really difficult big process. I really stuck with this problem can you help me out, please friends.. Your help will greatly appreciated.. Thank you very much
> SELECT tranno ,mrno medrecno ,createdon,createdat,no_of_trans nooftrans FROM mytab WHERE mrno = 'MR1514' and tranno = 1111 ORDER BY no_of_trans tranno medrecno createdon createdat nooftrans
I have either 2 or 1 row for each customer number I want to write a SQL to pull data into 1 table based on same CustomerNumber, if only one row is present for the particular customer number it should pull null in FName2,LName2,DOB2 columns.
example: CustNumber Fanme Lname DOB 1 Sam tiller 08/26/1981 1 Joe timy 01/02/1986 2 jack niks 09/09/1990
Result I want: CustNumber Fname1 Lname1 DOB1 Fname2 Lname2 DOB2 1 Sam Tiller 08/26/1981 Joe timy 01/02/1986 2 Jack niks 09/09/1990 null null null
I have the following report I need to create with 2 parameters. An equal OR not equal. I need the report to have a drop down that has equal to '1024' or a drop down option that IS NOT equal to '1024'. I also need the WHERE clause to return the equal or not equal based on the user selection inside of SSRS.
SELECT user1 AS [Company], reference AS [PAI_REF], statenumber, LEFT(user4, 7) AS [Supplier Code], user4 AS [Company Information], user8 AS [Transaction Type], user2 AS[Invoice Number], --CONVERT(VARCHAR,CONVERT(Date, user3, 103),101) AS [Invoice Date], [routeName] AS [Route], username AS [User Name]
This is on SQL Server 2008. Please find a detailed description and the file of the data, that I am working on.
Requirements:
1. If 'Channel' is not equal to "Omnibus" where the 'Trans Description'is equal to "Purchase" and "Redemption" for one purchase and one redemption that match on 'System' , 'Account TA Number' , 'Product Name' , 'Settled Date' , and where the 'Trade Amount' of the purchase and redemption is within 5%, then display those set of records.
2. If deemed wash trades, allow user to update the purchase and redemption pair 'Trans Description' from "Purchase" to "Exchange In" and 'Trans Description' from "Redemption" with "Exchange out"
System Channel Dealer Name Firm Name Product Cusip Product Name Product Share Class Trade ID Settled Date Account TA Number Trans Description Trade Amount
SCHWABPORTAL US - ASG MILLIMAN MILLIMAN 64128K777 Strategic Income Fund A 29806259 30-Jan-15 000BY00F2RW Redemption $ 25,68,458.15
I have a form to assign JOB SITES to previously created PROJECT. The JOB SITES appear in the DataList as it varies based on customer. It can be 3 to 50 JOB SITES per PROJECT. I have "PROJECT" table with all necessary fields for project information and "JOBSITES" table for job sites. I also created a new table called "PROJECTSITES" which has only 2 columns: "ProjectId" and "SiteId". What I am trying to do is to insert multiple rows into that "PROJECTSITES" table based on which checkbox was checked. The checkbox is located next to each site and I want to be able to select only the ones I need. Btw the Datalist is located inside of a formview and has it's own datasource which already distincts which JOBSITES to display. Sample: ProjectId - SiteId 1 - 5 1 - 9 1 - 16 1 - 18 1 - 20 1 - 27 1 - 31 ProjectId stays the same, only values for SiteId are being different. I hope I explaining it right. Do I have to use some sort of loop to go through the automatically populated DataList records and how do I make a multiple inserts to database table? We use SQL Server 2005 and VB for code behind. Please ask if I missed on some information. Thank you in advance.
I have a table with PO#,Days_to_travel, and Days_warehouse fields. I take the distinct Days_in_warehouse values in the table and insert them into a temp table. I want a script that will insert all of the values in the Days_in_warehouse field from the temp table into the Days_in_warehouse_batch row in table 1 by PO# duplicating the PO records until all of the POs have a record per distinct value.
Example:
Temp table: (Contains only one field with all distinct values in table 1) Days_in_warehouse 20 30 40
I am working on a sql data that has a list of product names, shipment type and the count of shipments. The values are listed as rows in the database. it will be in the below format.I want to transpose only the shipment type and the corresponding count of each product name in the below format.I tried to do this but i am not able to achieve in the correct format.
I have 2 tables each containing a material type. Table 1 contains material from their 3D application. Table 2 contains material with specific values that is not ours and we cannot rename or edit the data. I need a type of junction or mapping table that can connect the user material to the preset material. for example:
User Material = Wood-MDF Preset Material = MDF Panel
I figured that i would make this table with 3 fields (ID, UserMaterialID, PresetMaterialID).How would i then construct a query view / Stored procedure that would return the Preset data values based on the user material id?
I have a table that is used to build rules. The rules point to other columns in other tables and usually contain only one value (i.e. ABC). But one of the options is to add a comma-separated list of SSNs (i.e. 123123123,012012012,112231122). I am trying to build a single query that allows me to leverage that list to get multiple rows from another table.
This obviously works:
SELECT * FROM vw_Person_Profile P (NOLOCK) WHERE P.PrsnPIISSN_Chr IN ('123123123','012012012','112231122')
But this does not:
SELECT * FROM vw_Person_Profile P (NOLOCK) WHERE P.PrsnPIISSN_Chr IN ( SELECT '''' + REPLACE(CONVERT(VARCHAR(4000),txtFieldValue), ',', ''',''') + '''' FROM MassProcessing_Rules PR WHERE PR.intRuleID = 10 )
I have a table with PO#,Days_to_travel, and Days_warehouse fields. I take the distinct Days_in_warehouse values in the table and insert them into a temp table. I want a script that will insert all of the values in the Days_in_warehouse field from the temp table into the Days_in_warehouse_batch row in table 1 by PO# duplicating the PO records until all of the POs have a record per distinct value.
Example:
Temp table: (Contains only one field with all distinct values in table 1)
The objective is to identify orders where an order fee has been applied incorrectly. I have multiple orders per customer, my table contains an orderID and a customerID. Currently if the customer places additional orders before the previous orders have been closed/cancelled, then additional fees are being applied.
Let's say I'm comparing order #1 to order #2. I need to identify these rows where the following is true:-
The CustID is the same.
Order #2 has a more recent order date.
Order #2 has a FeeDate Before the CancelledDate of Order #1 (or Order #1 has no cancellation date).
So in the table the orderID:2835692 of CustID: 24643 has a valid order fee. But all the subsequently placed orders have fees which were applied before the first order was cancelled and so I want to update the FeeInvalid column with a 'Y'. The first fee will always be valid.
I think I understand why the code I am trying doesn't achieve the result I want but I can't figure out how to write it correctly. Below is one example of code I've tried and also code to create the table and insert some test data.
update t1 SET FeeInvalid = 'Y' FROM MockData t1 Join MockData t2 on t1.CustID = t2.CustID WHERE t1.CustID = t2.CustID AND t2.OrderDate > t1.OrderDate AND t2.FeeDate > t1.CancelledDate CREATE TABLE [dbo].[MockData]( [OrderID] [float] NULL,
I have questions and answers from one table, I need to select questions as column names and answers column values as the results for the questions column.
I need Insert rows in the OrderDetails Table based on values in the Orders Table
In the Orders table i have a columns called OrderID and ISale. In the OrdersDetails i have columns called OrderID and SaleType
For each value in the OrderID Column of the Orders Table, anytime the ISale Column in the Orders table = 1, and the SalesType column in the OrderDetails table is empty, I want to add two rows in the OrderDetails table. One row with the value K and another row with the value KD. That is a row will be added and the value in the SalesType column will be K, also a second row will be added and the value in the SalesType column will be KD
Also for each value in the OrderID Column of the Orders Table, anytime the ISale Column in the Orders table = 0, and the SalesType column in the OrderDetails table is empty, I want to add two rows in the OrderDetails table. One row with the value Q and another row with the value QD That is a row will be added and the value in the SalesType column will be Q, also a second row will be added and the value in the SalesType column will be QD.
How to count the number of values that exist in a row based on the values from an array of numbers. Basically the the array of numbers I want to look for are in row 1 of table [test 1] and I want to search for them and count the "out of" in table [test 2]. Excuse me for not using the easiest way to convey my question below. I guess in short I have 10 numbers and like to find how many of those numbers exist in each row. short example:
I am working with a data set containing several years' of monetary values. I have entries for past dates and the associated values, and I also have entries for future dates. I need to populate the values of the future date records with the values from the same date the previous year. Is there any way this can be done in Power Pivot?
I have a script that I use after some amount of data massaging (not shown). I would like to be able to change the
1) denominator value (the value 8 in line 32 of my code) based on how many columns are selected by the where clause:
where left(CapNumber,charindex('_', CapNumber)-1) = 1where capNumber is a value like [1_1], [1_4], [1_6]...[1_9] capNumber can be any values from [1_1]...[14_10] depending upon the specialty value (example: Allergy) and the final number after the equal sign is a number from 1 to 14)
2) I'd like to dynamically determine the series depending upon which values correspond to the specialty and run for each where: left(CapNumber,charindex('_', CapNumber)-1) = n. n is a number between 1 and 14.
3) finally I'd like to dynamically determine the columns in line 31 (4th line from the bottom)
If I do it by hand it's 23 * 14 separate runs to get separate results for each CapNumber series within specialty. The capNumber series is like [1_1], [1_2], [1_3],[1_4], [1_5], [1_6], [1_7], [1_8],[1_9] ... [8_4],[8_7] ... [14_1], [14_2],...[14_10] etc.
Again, the series are usually discontinuous and specific to each specialty.
Here's the portion of the script (it's at the end) that I'm talking about:
--change values in square brackets below for each specialty as needed and change the denom number in the very last query.
if object_id('tempdb..#tempAllergy') is not null drop table #tempAllergy select * into #tempAllergy from dbo.#temp2 T
[Code] ....
If I were to do it manually I'd uncomment each series line in turn and comment the one I just ran.
