I have a question regarding the total count of the table rows
Select count (name) from test. Lets say I have got 200 count. And Select count (lastname) from test1.I have got 200.And this counts I should store it in "There are nn name items awaiting your attention and nn pending lastname's awaiting your approval".
So now I have to store the count in 'nn'.
I have 2 tables:
TableA:
Name
UserA
UserB
UserC
Table B:
Name Data
UserA xxx
UserB asdasd
UserB ewrsad
UserC dsafasc
UserA sdf
UserB dfvr4
I want to count the total entries in Table B for every user in Table A. The output would be:
Name Count
UserA 2
UserB 3
UserC 1
I can use a Select Count statement, but I will have to make a SQL call for every user in Table A. Also, Table A is dynamic, so the users are always changing. Can this be incorporated into one SQL call to count the total rows in Table B for each user in Table A?
My table contains 1000 records,
I need to know the total record count with the below paging query
SELECT EmpName,Place
FROM EmplyeeDetails ORDER BY Place
OFFSET 10 ROWS FETCH NEXT 10 ROWS ONLY;
How to get?
Hi,
I want to return the total number of rows and top n records from my query. Is it possible to do this by simply running a single query. My query is dynamic so I can not create any temp table or table variables.
Bacially I want to eliminate 2 calls for sp_executesql
Set @ColumnCount = "Count(*)"
Set @Columns = " Top 100 a,b,c"
Set @Filter = "a = 1001"
Set @sql = "select " + @ColumnCount + " FROM TABLEA WHERE " + @Filter
sp_executesql @Sql
Set @sql = "select " + @Columns + " FROM TABLEA WHERE " + @Filter
sp_executesql @Sql
Thanks
Pun
I need to create a stored procedure for total count of the user's. If User from front end invites other user to use my tool, that user will be stored into a table name called "test",lets say it will be stored as"Invited 1 User(s)" or if he invites 2 users it will store into table as "Invited 2 User(s)."
But now we have changed the concept to get the ISID (name of the user) and now when ever the user invites from the front end, the user who have invited should stored in two tables "test" and " test1" table .
After we get the data into test and test1 table i need the total count of a particular user from both tables test and test1.
if i invite a user , the name of the user is getting stored in both test and test1 tables.Now i want to get the count of a user from both tables which should be 1,but its showing 2.
Reason: Why i am considering the count from 2 tables is because before we were not tracking the usernames and we were storing the count in single test table.,but now we are tracking user names and storing them in both tables(test and test1).
Here is my sample code:
I need to sum it up to get the total user's from both the table but I should get 1 instead of 2
SELECT
(select distinct COUNT(*) from dbo.test
where New_Values like '%invited%'
and Created_By= 'sam'
+
(select distinct count (*) from dbo.test1
where invited_by ='sam'
If I just use a simple select statement, I find that I have 8286 records within a specified date range.
If I use the select statement to pull records that were created from 5pm and later and then add it to another select statement with records created before 5pm, I get a different count: 7521 + 756 = 8277
Is there something I am doing incorrectly in the following sql?
DECLARE @startdate date = '03-06-2015'
DECLARE @enddate date = '10-31-2015'
DECLARE @afterTime time = '17:00'
SELECT
General_Count = (SELECT COUNT(*) as General FROM Unidata.CrumsTicket ct
[Code] ....
Hi all
i using lookup error output to insert rows into table
Rows count rows has been inserted on the table 59,123,019 mill
table rows count 6,878,110 mill ............................
any ideas
I am using SQL Server 2008.Each stock item will have default 4 document type (1, 5, 6, 7) and each will have 3 zone's (1, 2, 3) to qualify. Each zone will be updated to 1 for that document type if the item successfully pass through it. If all zone are NULL means no transaction. How to retrieve only the failed rows which means not all zone are 1 or NULL.In the image GJ-00064 has one row failed. So how to get the count of failed rows for each item
Expected result:
Uniid <-> Stockcode <-> FailedRows
1670 <-> GJ-00064 <-> 1
I have 3 tables: Suppliers, Documents and Verification, each document may have multiple verification where I need to get the last verification according to verification date. So I just need a "Select top 1 result from Documents, Verification where doc_iddoc=ver_iddoc and result='True' order by ver_date desc" so far I get the result of the last verification, but here's the problem:
I need to get a row with the count of documents for each supplier, I mean:
Supplier Name Docs NegativeVerification
Acme Co 10 1
that is I would need to loop for each supplier and each document and get the last verification, if one of any of documents have negative verification then add it to negative results. Is it possible to achieve this with a query or do I have to do it through stored procedure?
is it possible to use the window functions to count the number of rows in the previous 24hours from the current row.
I have a table of events like:
User, TimeStamp, etc...
I want to identify the row which is the event number 50 in the past 24 hours.
does the window functions can do this? and how?
the ROW PRECEDING etc... appear to not have enough feature to support time related function.
Stream-insight is able to create this type of query, but I have to do it directly in SQL.
I need to show the total amount of rows in a specific table?
The query is as follows:
As part of the planning process to expand the database that supports Northwind operations, the IT manager would like to know how many rows are currently in specific tables so that he can conduct capacity planning.
The results needed include two columns, TableName( containing all the tables in the database and Rows, which contain the total amount of all the rows per table).
which is the most efficient query to find out the total number of rows in a table other than using - SELECT COUNT(*) ... in query
View 10 Replies View RelatedI have a SQL script to insert data into a table as below:
INSERT into [SRV1INS2].BB.dbo.Agents2
select * from [SRV2INS14].DD.dbo.Agents
I just want to set a Trigger on Agents2 Table, which could delete all rows in the table , before carry out any Insert operation using above statement.I had below Table Trigger on [SRV1INS2].BB.dbo.Agents2 Table as below: But it did not perform what I intend to do.
USE [BB]
GO
/****** Object: Trigger Script Date: 24/07/2015 3:41:38 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[code]....
I have database test007DB and I need count all table rows then insert into test99 table using ssis packages .
test99: tableName countRows
t1 20
t2 30
t3 25
I have a table with a couple hundred billion records (sql server 2005). When I do a select count(*) from tblx -- it takes this side of forever. Is it possible to count partitions and then add them up to make it faster?
How I could improve the performance for count(*) of this huge table. Note: if the partition idea sounds viable -- what would that look like?
I would like to know the best way to count and display the number of rows in a given database table called memberinfo.
This should tell me how many members I have right?
Thanks
I've noticed that sometimes the # of rows specified in table properties tab is different from the # shown by select count(*) from tableA.
Why is this ?
(SQL 2k, sp2, indexed table)
I am building a Table Report where I need to "count" the number of cells in a column conditionally.
I have a column of data where the values will be "Orange", "Apple", "Banana", NULL
The pseudocode would be something like this:
iCountOfOranges as Integer
iCountOfApples as Integer
iCountOfBananas as Integer
IF Cell.Value = "Orange" THEN
iCountOfOranges = iCountOfOranges + 1
ELSE IF Cell.Value = "Apple" THEN
iCountOfApples = iCountOfApples + 1
ELSE IF Cell.Value = "Banana" THEN
iCountOfBananas = iCountOfBananas + 1
The 3 count values would then be displayed in 3 footer rows at the bottom of the table.
Thanks
I have a table called Employee which have 6 columns. This table are having 1000 records. Now I want to know the distinct value count of all these 6 columns as well as normal count. like this:
ColumnName DistinctCount NormalCount
Id 1000 1000
Name 1000 1000
Phone 600 600
PINCode 200 1000
City 400 1000
Gender 2 1000
Hi all,
I’ve a table with production objects, and another with possible items composition of the object. I need to count how many occurrences of each standard composition appears:
Table PROD:
PROD_ID COMPONENT TYPE
--------- ----------- -----
1 AAA X1 BBB Y2 AAA X3 BBB Y4 AAA Y5 AAA X5 BBB YTable ITEM_COMPITEM_ID COMPONENT TYPE-------- --------- -----7 AAA X7 BBB Y8 AAA X9 BBB Y
The result should be:
ITEM_ID OCCURRENCES-------- ----7 28 19 1
Table PROD have millions of rows, my way is too slow (I’ve a loop where each PROD object are separately queried against the ITEM_COMP), some have an idea for a most efficient way?
ThX
NeuralC
How can I count the rows when I make new table. Here is my code:
SELECT EMPLOYEE_ID, LAST_NAME, SALARY, JOB_ID, COMMISSION_PCT, DEPARTMENT_ID, COUNT(TO_CHAR(HIRE_DATE, 'DAY')) AS NUM_EMPLOYEES
FROM EMPLOYEES
WHERE TO_CHAR(HIRE_DATE, 'Day') = 'Monday'
GROUP BY EMPLOYEE_ID, LAST_NAME, SALARY, JOB_ID, COMMISSION_PCT, DEPARTMENT_ID;
Here is the table: [URL] ....
I have 10 rows, so I would like under NUM_EMPLOYEES to be displayed 10 on each row.
I have a table called Employees which has lots of columns but I only want to count some specific columns of this table.
i.e. EmployeeID: 001
week1: 40
week2: 24
week3: 24
week4: 39
This employee (001) has two weeks below 32. How do I use the COUNT statement to calculate that within these four weeks(columns), how many weeks(columns) have the value below 32?
I am using stored procedure to load gridview but problem is that i am not getting all rows from first table[ Subject] on applying conditions on second table[ Faculty_Subject table] ,as you can see below if i apply condition :-
Faculty_Subject.Class_Id=@Class_Id
Then i don't get all subjects from subject table, how this can be achieved.
Sql Code:-
GO
ALTER Proc [dbo].[SP_Get_Subjects_Faculty_Details]
@Class_Id int
AS BEGIN
[code] ....
The following query returns a value of 0 for the unit percent when I do a count/subquery count. Is there a way to get the percent count using a subquery? Another section of the query using the sum() works.
Here is a test code snippet:
--Test Count/Count subquery
declare @Date datetime
set @date = '8/15/2007'
select
-- count returns unit data
Count(substring(m.PTNumber,3,3)) as PTCnt,
-- count returns total for all units
(select Count(substring(m1.PTNumber,3,3))
from tblVGD1_Master m1
left join tblVGD1_ClassIII v1 on m1.SlotNum_ID = v1.SlotNum_ID
Where left(m1.PTNumber,2) = 'PT' and m1.Denom_ID <> 9
and v1.Act = 1 and m1.Active = 1 and v1.MnyPlyd <> 0
and not (v1.MnyPlyd = v1.MnyWon and v1.ActWin = 0)
and v1.[Date] between DateAdd(dd,-90,@Date) and @Date) as TotalCnt,
-- attempting to calculate the percent by PTCnt/TotalCnt returns 0
(Count(substring(m.PTNumber,3,3)) /
(select Count(substring(m1.PTNumber,3,3))
from tblVGD1_Master m1
left join tblVGD1_ClassIII v1 on m1.SlotNum_ID = v1.SlotNum_ID
Where left(m1.PTNumber,2) = 'PT' and m1.Denom_ID <> 9
and v1.Act = 1 and m1.Active = 1 and v1.MnyPlyd <> 0
and not (v1.MnyPlyd = v1.MnyWon and v1.ActWin = 0)
and v1.[Date] between DateAdd(dd,-90,@Date) and @Date)) as AUPct
-- main select
from tblVGD1_Master m
left join tblVGD1_ClassIII v on m.SlotNum_ID = v.SlotNum_ID
Where left(m.PTNumber,2) = 'PT' and m.Denom_ID <> 9
and v.Act = 1 and m.Active = 1 and v.MnyPlyd <> 0
and not (v.MnyPlyd = v.MnyWon and v.ActWin = 0)
and v.[Date] between DateAdd(dd,-90,@Date) and @Date
group by substring(m.PTNumber, 3,3)
order by AUPct Desc
Thanks. Dan
Matrix table has ID column and data below.
ID Flag TestDate Value Comment
111 2 12/15/2014 7.5 null
222 2 Null 10 received
Matrix_Current table could have 1 or multiple rows as below.
ID Flag TestDate Value Comment
111 2 01/26/2015 7.9
111 2 02/23/2015 7.9
111 2 04/07/2015 6.8
222 1 null 8 test comment 1
222 3 null 9 test comment 2
When I run below update
UPDATE AM
SET M.Flag = MC.Flag, M.TestDate = MC.TestDate,
M.Value = MC.Value, M.comment = MC.Comment
FROM dbo.Matrix M inner join dbo.Matrix_Current MC on M.ID = MC.ID
Matrix table has value below:
ID Flag TestDate Value Comment
111 2 01/26/2015 7.9
222 1 Null 8 test comment 1
I want to update Matrix table from all row from Matrix_Current, final table would like below:
ID Flag TestDate Value Comment
111 2 04/07/2015 6.8
222 3 Null 9 test comment 2
I've a SSIS 2008 parent/child package solution to manage data transfers between two different data sources, so we can copy multiple tables and capture how many rows were transferred and duration for each transfer. This solution was working fine up until last week, when I made some changes to allow the package to perform a source count using standard SQL determined by an expression, or SQL provided from configuration tables, I also changed the package to Truncate or not the destination table, again controlled by configuration settings in a table. The child packages which perform the data flows have not changed!
The day after the controlling package promotion to live, I saw the bizarre behaviour of the Package log stating all rows transferred, but the actual table counts were not what the log stated, see attached file. The package solution works ok on other servers and was ok in DEV, but there were less tables and rows transferred.Re-running the package gave the same errors, but on some of the same tables and some different ones.
As it is the child packages doing the transfers and nothing has changed in them. I cannot see how the log would be able to say all rows are transferred and yet not all of the rows are actually moved?
Process output - where you can see counts and log Table transfer controller (as txt not dtsx)
An example of the data transfer child packages (as txt not dtsx)When I set the ExecuteOutOfProcess = True the package worked fine, unfortunately, this is not a good solution as SSIS 2008 does not tidy up the Dtshost.exe processes it starts and I'd be left with a memory issue after a very short time, we transfer hundreds of tables each day. ( I could write a .net script in the controlling package to kill the child processes, but that would still have hundreds of processes running before I could end them, as we have three parallel streams to allow a bit better performance.
I have a table for example like following
DECLARE @tmpTable table
(
name varchar(10),
address1 varchar(10),
phnno varchar(10),
mobno varchar(10)
)
INSERT INTO @tmpTable(name,address1,phnno,mobno)
[Code] ....
I want to remove all empty rows like row 1,2 and 3 in the above example.
I can't check all columns null values as there are many columns in my actual table.
I am using Sql Server 2008 R2.I have a existing query that basically says
Select Top 50 Subscriber_ID, Member_Name, Group_ID
from my_table
order by rand(checksum(newid()))
However the client now wants to have at least two from each group_id. There are 17 different groups. When I run this as is I get about six of the 17 groups in the results. How can I change this to get at least two results from each group_id?
I am a newbie to Sql server and i am having a task where my current table with always two rows existing and ID column as primary key looks like below:
ID PlateNo Type Image Name
27 455 User img1.jpg
32 542 Alternative img2.jpg
And i want a sql query to modify my table so that the data should be like as shown below:
ID PlateNo Type Image Name
27 542 Alternative img2.jpg
32 455 User img1.jpg
I have a table with more than 1000 records. The columns look like this
Import id | Reference | Date | Username | Filename
Some of the rows are duplicates except for the fact that they have different values for the first column alone (import id)
11111 test 21-07-2015 xxxxxx yyyyyy
22222 test 21-07-2015 xxxxxx yyyyyy
Is it possible to delete these kind of duplicate rows by ignoring the import id ?
Copy out all data from a DB table into/across delimited text file(s) ensuring that each text file size is no more than 3MB.Have created a SSIS solution where it achieves this requirement ..well sort of achieves the requirement ... Here it what the current solution (sparing the minute details) does in a nutshell & Problems with it:
1) Created a function (Script below) which finds the
maximum row size in bytes in a given DB table & uses it to calculate
how many rows can be copied out into a text file without exceeding 3MB size limit.
For instance: A DB table selected had 788 rows in total and this function for this particular table returned a value of 181 rows { select [dbo].[udf_GetRowPartitionNumber](‘<TableName>’)as #ofRowstoPartitionTableby --181} meaning in order to not exceed the requirement of 3MB per text file, we had to copy all the data from DB table across (create) 5 text files {Select
CEILING(788
[code]....
Hi,
I am using a foreach file to loop through mdb files kept in a folder and then transfer them to Sql server.
I want to do the following -
Sum the total no. of rows in mdb while the package executes
Sum the total no of rows transferred to Sql server.
Write them to a database (InitialRowCnt, FinalRowCnt, PackageNm, UserNm)
Note: Total = Total rows in all mdb files. so if there are 10 mdb files with 10 rows each, total = 100.
I saw a RowCount transformation..but just dont know where to place and what to do with it.
thanks
I have a table with the following fields:
ID (int, identity)
Name (nvarchar(255))
Block (nvarchar(50))
Street (nvarchar(255))
Floor (nvarchar(50))
Unit (nvarchar(50))
Address1 (nvarchar(255))
Address2 (nvarchar(255))
I want to iterate through the table and populate Address1 as [Block] [Street] #[Floor]-[Unit].If the 'Floor' field contain a number < 10 (e.g., '8'), I want to add a '0' before it (e.g., '08'). Same for Unit.How would I do this using cursors (or other recommended method)?