Table Structure
EID COLA COLB
1 name A
1 age 23
1 city hyd
1 email abc@live.in
1 mobile 45126
2 name B
2 age 43
[code]....
how to display the result where any of the mandatory fields (name,age,city,email,mobile)are missing then it should display as that field as Null
I am unable to update the data using record by record below scenario.
Required output:
patient will able to Admit/Re-admit multiple times in hospital, if a patient readmitted multiple times in hospital after the first visit, first visit record will get Re-admission=0 and Index=1. This visit should cal Index_Admission of that patient. using this index_admission should calculate the 30-day readmission.
Current Output:
Calculation: From index_admission discharge date to next admit_visit date,
1) if the diff is having less than 30 days, readmission=1 and Index=0
else readmission=0 and Index=1 should be update.
For checking this every time should check using the latest index_admission discharge_date.
To get this result i written below logic, but it's updating readmission=0 and Index=1 after 30-day post discharge of using first index admission.
UPDATE Readmission
SET Index_AMI = (CASE WHEN DATEDIFF(DD, (SELECT Sub.Max_Index_Dis FROM
(SELECT Patient_ID, MAX(Discharge_Date_Time) Max_Index_Dis FROM Readmission
WHERE Index_AMI = 1 AND FPR.Patient_ID = Patient_ID GROUP BY Patient_ID) Sub)
, FPR.Admit_Date_Time) between 0 and 31 THEN 0 ELSE 1 END),
[Code] ....
Expected Result:
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
UPDATE TABLE1
SET TABLE1.FIELD2 = 1
ELSE
UPDATE TABLE2
SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
I've been beating my head against this for a bit and haven't been able to figure this out I want to pull 1 set of values between a date time range if @Report = '1' but if @Report = 2 or 3 I want it to drop 3 of the parameters so it will pull all items. by dropping the where parameters for @BeginRangeDate and @LookOutDate and L.COLineStatus. My report works great if I go in and run Report 1 with the date parameters in the where statement and also works great for Reports 2, 3 if I REM out those 3 items in the Where statement. Here is what I currently have
CASE@Report
WHEN'1'THEN
WHEREL.RequestedShipDate>=@BeginRangeDate
ANDL.RequestedShipDate<=@LookoutDate
ANDDO.ForecastDate>=@ForecastDate
[Code] .....
I've always been mistified why you can't use a column alias in the group byclause (i.e. you have to re-iterate the entire expression in the group byclause after having already done it once in the select statement). I'mmostly a SQL hobbiest, so it's possible that I am not doing this in the mostefficient manner. Anyone care to comment on this with relation to thefollowing example (is there a way to acheive this without re-stating theentire CASE statement again in the Group By clause?):Select 'Age' =CaseWHEN(SubmittedOn >= DATEADD(dd, - 30, GETDATE())) AND (SubmittedOn <=DATEADD(dd, - 0, GETDATE()))THEN '0-30 Days Old'WHEN(SubmittedOn >= DATEADD(dd, - 60, GETDATE())) AND (SubmittedOn <=DATEADD(dd, - 31, GETDATE())) Then '31-60 Days Old'WHEN(SubmittedOn >= DATEADD(dd, - 90, GETDATE())) AND (SubmittedOn <=DATEADD(dd, - 61, GETDATE())) Then '61-90 Days Old'WHEN(SubmittedOn <= DATEADD(dd, - 91, GETDATE())) THEN '91+ Days Old'ELSE cast(SubmittedOn as varchar(22))end,max(SubmittedOn), COUNT(SCRID) AS NbrSCRsFrom SCRViewWHERE(StatusSort < 90) ANDCustomerID = 8 andUserID = 133group byCaseWHEN(SubmittedOn >= DATEADD(dd, - 30, GETDATE())) AND (SubmittedOn <=DATEADD(dd, - 0, GETDATE()))THEN '0-30 Days Old'WHEN(SubmittedOn >= DATEADD(dd, - 60, GETDATE())) AND (SubmittedOn <=DATEADD(dd, - 31, GETDATE())) Then '31-60 Days Old'WHEN(SubmittedOn >= DATEADD(dd, - 90, GETDATE())) AND (SubmittedOn <=DATEADD(dd, - 61, GETDATE())) Then '61-90 Days Old'WHEN(SubmittedOn <= DATEADD(dd, - 91, GETDATE())) THEN '91+ Days Old'ELSE cast(SubmittedOn as varchar(22))endOrder by max(submittedon) descThanks,Chad
View 4 Replies View RelatedIn the below query, I can get the individual/single group by columns as well as multiple but I cannot control the order in which I would like to group by the data.
So lets say I want to group the data by OS->browser->browser_version(just one example) then I cannot achieve that as the order of OS column comes later in the query.
I know one option would be to write a dynamic SQL but i dont want to do that because of performance reasons. Any other way this can be achieved?
select
case when @include_browser =
1 then browser_name end as browser_name,
case when @include_browser_version
= 1 then browser_version end
as browser_version,
[Code] ....
I use Order By Used with Case Statement and may be this is the reason for which i am getting error
Windowed functions can only appear in the SELECT or ORDER BY clauses.
Here is my complete sql where i use Row_Number function for pagination with sorting.
DECLARE @StartIndex INT
DECLARE @EndIndex INT
DECLARE @SortColumn VARCHAR(MAX)
DECLARE @SortDirection VARCHAR(MAX)
SET @StartIndex = 1
[Code] ....
Is it possible to combine a CASE statement with two different columns to retrieve data into one result column? In one column it has multiple JobCode, but this needs to be divided. The only way I can see to do this is take the data from another column to get the results.Ex. JobCode - has one code for several job descriptions (there are about 30), but all within this code cannot have the same level of access. So I need to divide them out, and put them in one column for AccessLevel.
JobTitle - has one code for one job, (but there are over 100).I want to pull from both columns to get the results I need to assign appropriate access level in one column.
Case JobCode (they all have same job code, but everyone in this job code should not have same access)
When '45' Then '1' (Principal, Asst. Prin, or any Administrator, Counselors)
When '25' Then '2' (this could be teacher, etc. )
Case JobTitle (this is how access should be)
When '12345' Then '1' (this is Administration only)
[code]....
I am trying to run the below but I get an error of 'Incorrect syntax ')'' --- I have tried every angle I can think of around the parens to fix this but nothing I do is working.
UPDATE abcdefg
SET [Date] = GETDate(),
[readytogo] =
(
CASE WHEN [customername] NOT IN (Select [customername] from [server].[database].[dbo].[view])
THEN 'Yes'
ELSE
'Needs Verification'
[code]....
I have used the below update query. However, its updating only the first value. Like its updating AB with volume when c.Type = ABC, similarly for CD. Its not updating based on the 2nd or the next case condition.
Update XYZ Set AB = a.Amt * (CASE WHEN c.Type = 'ABC' THEN (c.volume)
WHEN c.TYPE = 'DEF' THEN (c.volume)
WHEN c.Type = 'GHI' THEN (c.volume)
Else 0
END),
CD = CASE WHEN c.Type = 'MARGIN' THEN '4105.31'
WHEN c.Type = 'ABC' THEN '123.1'
WHEN c.Type = 'DEF' THEN '234.2'
WHEN c.Type = 'GHI' THEN '567.1'
END
from table1 a join table2 b
on a.Cust = b.Customer
join table3 c
on b.account = c.account and b.channel =c.channel
Why its not working properly? But if i use Select statement instead of update query its working properly.
I am trying to add the letters 'MS' in front of value while using a case statement. If Dispo = 2 I want it to pull back 'Inactive', else I want it to pull back the Value with MS in front (eg. "MS14"). The data in the value column are numbers. Would I use a CONCAT? If so where does that need to go?
Case when dispo = 2 then 'Inactive' else cast(Value as varchar(11)) end ,
below is my original query
select Value = count(*) from dbo.test
I have 20 rows in dbo.test so i will get 20 as my output, now i need to write a case statement here such that when count(*) = 0 then it should display text filed 'NO Data' else it should display the count.
below is the sql query i am trying to write and i receive an error saying Incorrect syntax near the keyword 'Between'.
Update dbo.Claims_Primary_Adjuster_Test_Sujith
SET
Claims_Primary_Adjuster_Test_Sujith.Supervisor = Claims_Internal_Transfer.Supervisor,
Claims_Primary_Adjuster_Test_Sujith.Office = Claims_Internal_Transfer.Office,
Claims_Primary_Adjuster_Test_Sujith.Specialty = Claims_Internal_Transfer.Specialty
from dbo.Claims_Primary_Adjuster_Test_Sujith
Left Outer Join Stg.HS_DW_RV_ClaimsON Claims_Primary_Adjuster_Test_Sujith.Claim_Number = HS_DW_RV_Claims.ClaimNumber
[code]....
how to modify my code such that it works for my condition?
I need to perform an update where there are multiple scenarios which determine the value that is entered. Below is a sort've psuedo code of how it needs to be.
Update MyTable SET MyColumn = CASE WHEN MyCol1 = 'Value1' Then NewValue Else
WHEN MyCol1 <> 'Value1' And MyCol2 = 'Active' Then 'Value1'
In the scenario where MyCol1 <> Value1 and MyCol2 <> 'Active' then no update would occur and the original value would remain intact.
I have a table A and lookup table B.
table A:
| ID | FRUIT | VEGETABLE | GOOD |
--------------------------------------------
| 1 | orange | cabbage | no |
| 1 | apple | lettuce | yes |
| 1 | kiwi | broccoli | no |
| 1 | pear | kale | yes |
table B:
| ID | FRUIT | VEGETABLE |
-------------------------------
| 1 | apple | lettuce |
| 2 | pear | kale |
If the fruit and vegetable in table A is found in table B, then set the GOOD column = yes, else no.
This is what I have so far.
update tableA
set GOOD =
(case when tableA.id = C.id then 'yes'
else 'no'
end
)
from
(select tableA.id as id
from tableA A
left join tableB B on B.fruit = A.fruit
and B.vegetable = A.vegetable) C
I have scenario where i have to pick one particular value from where condition. Here is the example:A store can have different types i-e A or B , A and B or either A or B.
Store Type Sales
11 A 1000
23 A 1980
23 B 50
5 B 560
I want to filter the store in "where clause" where
1)- if the store has type A and B, then assign only A
2)- if the store has type A associated with it then assign A
3)- if the store has type B associated with it, then assign B.
Select Store, sum(sales), Type
from table1
where (TYPE]= (case when [TYPE] in ('A','B') then 'A'
when [TYPE]='A' then 'A' else 'B'end))
GROUP BY [store], [TYPE]
The above statement is not working for when store has only Type B associated with it.
I am required to find or check that a specific word exists in string or not.
Suppose I have to find the word 'st' than I need the result true if and only if the following occurrences are there.
1. 'St is valid;' -> true
2. 'DOB is valid;ST is invalid;' -> true
3. 'DOB is valid; ST is invalid;' -> true
4. 'DOB is valid;invalid ST;' -> true
5. 'DOB is valid; invalid ST;' -> true
6. 'DOB is valid; invalid STate;' -> false
Means the exact ST should be search. It is not free text search.
T-SQL is needed to be used in select statement with case using PATINDEX, RegEx or any suitable t-sql command.
Below is the SQL Query i am currently having
SELECT IG_FinancialTransactionSummary.ClaimNum,IG_FinancialTransactionSummary.TransactionCode,
IG_FinancialTransactionSummary.TransactionDate,IG_FinancialTransactionSummary.Username,
FinancialTransactionSummaryTest.ClaimNum,FinancialTransactionSummaryTest.TransactionAmount,
FinancialTransactionSummaryTest.UserName--,FinancialTransactionSummaryTest.TransactionDate
[Code] ....
And here is the result dataset
ClaimNumTransactionDateUsername ClaimNum TransactionAmountUserName
2000074 20150209jerry.witt 2000074 -10000DATAFIX INSERTED ON 20150626 AT 162152493 LOCAL
2000074 20150626DATAFIX INSERTED ON 20150626 AT 162152493 LOCAL 2000074 -10000DATAFIX INSERTED ON 20150626 AT 162152493 LOCAL
[Code] .....
So,if we look at the result set, we notice 2 conditions where the IG_FinancialTransactionSummary.Username is like 'Data' and if we see the transaction date then sometimes that is the max transaction date or sometimes there are transactions that happened after but that doesn't have like '%data%' in username . So, i need to add a new column to my sql query which should basically verify if the username is like '%data%' and if that is the max(transaction date) or even if there are any transactions after that doesn't have like '%data%' then YES else No.
I have a a Group By query which is working fine aggregating records by city. Now I have a requirement to focus on one city and then group the other cities to 'Other'. Here is the query which works:
Select [City]= CASE WHEN [City] = 'St. Louis' THEN 'St. Louis' ELSE 'Other Missouri City' END, SUM([Cars]) AS 'Total Cars'
From [Output-MarketAnalysis]
Where [City] IN ('St. Louis','Kansas City','Columbia', 'Jefferson City','Joplin') AND [Status] = 'Active'
Group by [City]
Here is the result:
St. Louis 1000
Kansas City 800
Columbia 700
Jefferson City 650
Joplin 300
When I add this Case When statement to roll up the city information it changes the name of the city to 'Other Missouri City' however it does not aggregate all Cities with the value 'Other Missouri City':
Select [City]= CASE WHEN [City] = 'St. Louis' THEN 'St. Louis' ELSE 'Other Missouri City' END, SUM([Cars]) AS 'Total Cars'
From [Output-MarketAnalysis]
Where [City] IN ('St. Louis','Kansas City','Columbia', 'Jefferson City','Joplin') AND [Status] = 'Active'
Group by [City]
Here is the result:
St. Louis 1000
Other Missouri City 800
Other Missouri City 700
Other Missouri City 650
Other Missouri City 300
What I would like to see is a result like:
St. Louis 1000
Other Missouri City 2450
I have column with value of all upper case, for example, FIELD SERVICE, is there anyway, I can convert into Field Service?
View 7 Replies View RelatedInside some TSQL programmable object (a SP/or a query in Management Studio)I have a parameter containing the name of a StoreProcedure+The required Argument for these SP. (for example it's between the brackets [])
EX1 : @SPToCall : [sp_ChooseTypeOfResult 'Water type']
EX2 : @SPToCall : [sp_ChooseTypeOfXMLResult 'TABLE type', 'NODE XML']
EX3 : @SPToCall : [sp_GetSomeResult]
I can't change thoses SP, (and i don't have a nice output param to cach, as i would need to change the SP Definition)All these SP 'return' a 'select' of 1 record the same datatype ie: NVARCHAR. Unfortunately there is no output param (it would have been so easy otherwise. So I am working on something like this but I 'can't find anything working
DECLARE @myFinalVarFilledWithCachedOutput
NVARCHAR(MAX);
DECLARE @SPToCall NVARCHAR(MAX) = N'sp_ChooseTypeOfXMLResult
''TABLE type'', ''NODE XML'';'
DECLARE @paramsDefintion = N'@CatchedOutput NVARCHAR(MAX) OUTPUT'
[code]...
I have a view where I'm using a series of conditions within a CASE statement to determine a numeric shipment status for a given row. In addition, I need to bring back the corresponding status text for that shipment status code.
Previously, I had been duplicating the CASE logic for both columns, like so:
Code Block...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE
[logic for condition 1]
THEN 'Condition 1 text'
WHEN [logic for condition 2]
THEN 'Condition 2 text'
WHEN [logic for condition 3]
THEN 'Condition 3 text'
WHEN [logic for condition 4]
THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This works, but the logic for each of the case conditions is rather long. I'd like to move away from this for easier code management, plus I imagine that this isn't the best performance-wise.
This is what I'd like to do:
Code Block
...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE shipment_status
WHEN 1 THEN 'Condition 1 text'
WHEN 2 THEN 'Condition 2 text'
WHEN 3 THEN 'Condition 3 text'
WHEN 4 THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This runs as a query, however all of the rows now should "Error" as the value for shipment_status_text.
Is what I'm trying to do even currently possible in T-SQL? If not, do you have any other suggestions for how I can accomplish the same result?
Thanks,
Jason
I need to display the output of a table in a specific format, I have attached the sample screenshot and code for reference.
I tried with pivot but does not seems to be working.
I'm using SQL accounting software now and i have a problem with my designer report. When i using designer report to design my customer statement of account, after i save the new design, i haven't rename it for the new statement report so the name there empty and i exit the designer report. So when i re-open the designer report, suddenly pop out "field value required". What should i do...? How can i re-open the designer report again?
View 1 Replies View RelatedBelow code gives the error "No value given for one or more required parameters"
strSQL = "insert into FILE_UPLOAD(RefNo, FileName, FileType, FileData, FileDescription, Created, CreatedBy) values "
strSQL = strSQL & "(?, ?, ?, ?, ?, ?, ?)"
Dim cmd As New OleDbCommand
cmd.Connection = objCommon.oConn
cmd.CommandText = strSQL
cmd.Parameters.Add("@RefNo", OleDbType.VarChar).Value = ""
cmd.Parameters.Add("@FileName", OleDbType.VarChar).Value = strFileName
[code]....
i was tasked to created an UPDATE statement for 6 tables , i would like to update 4 columns within the 6 tables , they all contains the same column names. the table gets its information from the source table, however the data that is transferd to the 6 tables are sometimes incorrect , i need to write a UPDATE statement that will automatically correct the data. the Update statement should also contact a where clause
the columns are [No] , [Salesperson Code], [Country Code] and [Country Name]
i was thinking of doing
Update [tablename]
SET [No] =
CASE
WHEN [No] ='AF01' THEN 'Country Code' = 'ZA7' AND 'Country Name' = 'South Africa'
ELSE 'Null'
END
What is the best way to script this
Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
I have the following tablestblFavouritesFavouriteSince datetimeUserCodeOwner int (the usercode of the user whose favouritelist this is)UserCodeFavourite int (the usercode of the user who has been added to the favouritelist of usercodeowner)EXAMPLE DATA10/14/2006 7:32:30 PM 4 710/16/2006 11:24:01 PM 4 510/16/2006 10:55:08 PM 5 4tblUserDataUserID uniqueidentifierUserName nvarchar(50)UserCode intaspnet_UsersUserID uniqueidentifierLastActivityDate datetimeNow I need a join statement that selects the fields aspnet_Users.UserID,aspnet_Users.LastActivityDate,tblUserData.Username,tblUserData.UserCode,tblFavourites.FavouriteSincefor all tblFavourites.UserCodeFavourite where tblFavourites.UserCodeOwner=4Could someone provide me with the join statement because I dont get it anymore :)
View 9 Replies View RelatedHi All,
I've looked through the forum hoping I'm not the only one with this issue but alas, I have found nothing so I'm hoping someone out there will give me some assistance.
My problem is the case statement in my Insert Statement. My overall goal is to insert records from one table to another. But I need to be able to assign a specific value to the incoming data and thought the case statement would be the best way of doing it. I must be doing something wrong but I can't seem to see it.
Here is my code:
Insert into myTblA
(TblA_ID,
mycasefield =
case
when mycasefield = 1 then 99861
when mycasefield = 2 then 99862
when mycasefield = 3 then 99863
when mycasefield = 4 then 99864
when mycasefield = 5 then 99865
when mycasefield = 6 then 99866
when mycasefield = 7 then 99867
when mycasefield = 8 then 99868
when mycasefield = 9 then 99855
when mycasefield = 10 then 99839
end,
alt_min,
alt_max,
longitude,
latitude
(
Select MTB.LocationID
MTB.model_ID
MTB.elevation, --alt min
null, --alt max
MTB.longitude, --longitude
MTB.latitude --latitude
from MyTblB MTB
);
The error I'm getting is:
Incorrect syntax near '='.
I have tried various versions of the case statement based on examples I have found but nothing works.
I would greatly appreciate any assistance with this one. I've been smacking my head against the wall for awhile trying to find a solution.
i want to display records as per if else condition in ms sql query,for this i have used tables ,queries as follows
as per data in MS Sql
my tables are as follows
1)material
fields are -- material_id,project_type,project_id,qty, --
2)AB_Corporate_project
fields are-- ab_crp_id,custname,contract_no,field_no
3)Other_project
fields are -- other_proj_id,other_custname,po
for ex :
vales in table's are
AB_Corporate_project
=====================
ab_crp_id custname contract_no field_no
1 abc 234 66
2 xyz 33 20
Other_project
============
other_proj_id other_custname po
1 xxcx 111
2 dsd 222
material
=========
material_id project_type project_id qty
1 AB Corporate 1 3
2 Other Project 2 7
i have taken AB Corporate for AB_Corporate_project ,Other Project for Other_project
sample query i write :--
select m.material_id ,m.project_type,m.project_id,m.qty,ab.ab_crp_id,
ab.custname ,op.other_proj_id,op.other_custname,op. po
case if m.project_type = 'AB Corporate' then
select * from AB_Corporate_project where ab.ab_crp_id = m.project_id
else if m.project_type = 'Other Project' then
select * from Other_project where op.other_proj_id=m.project_id
end
from material m,AB_Corporate_project ab,Other_project op
but this query not work,also it gives errors
i want sql query to show data as follows
material_id project_type project_id custname other_custname qty
1 AB Corporate 1 abc -- 3
2 Other Project 2 -- dsd 7
so plz help me how can i write sql query for to show the output
plz send a sql query
I'm upgrading to SQL 2012 from 2008R2, while doing so i will be rebuilding all the indexes on all the database. In my previous environment while doing so, i got space related error in primary filegroup for insufficient space in the primary filegroup. Is there any rule of thumb about how much space is required by index rebuild command for each database, or is there a safe threshold for free space in the database?
View 9 Replies View RelatedHi Everyone,
I am trying to do a query where I need to use as little C# as possible to build my gridview. Basically I have a column called statusID. There are about 15 options for this column but I only want to count certain ones. I want to count when statusID = 3 and output that into a column called "fullUnitsUsed" but when the value is 4 or > 13 I want it to count and put the result into a column called "halfUnitsUsed". I also want it to count based on the month. To accomplish this I have used CASE and GROUP BY. This has worked to some extent. Currently if I COUNT for one month I get the correct number of fullUnitsUsed and halfUnitsUsed used for January. Unfortunately the query returns 2 records for the month. The first one has a value for fullUnitsUsed and halfUnitsUsed is NULL, the second record has fullUnitsUsed as NULL and halfUnitsUsed has the correct value. I was hoping to output one record where both fullUnitsUsed and halfUnitsUsed have data. My other problem is that if I test for the entire year (which is what this query is supposed to do) there are 5 records returned for each month, 3 of the records have fullUnitsUsed and halfUnitsUsed both as NULL and for the other 2, one has fullUnitsUsed with data and the other has halfUnitsUsed with data and the other column in both records is NULL. The values for fullUnitsUsed and halfUnitsUsed are counted for the entire year as well, which I only want it to count based on each month. Below is my query, any suggestions about how to approach this will be greatly appreciated. If any clarification is needed please let me know. Again if I could get this to work completely with SQL and not need to use any more C# than I have to it would be preferable.
SELECT People.lastName + ', ' + People.firstName AS fullName, Property.Name, NYSDDSORegion.Description, OpenDays.[month], OpenDays.maxOpenDays,CASE Attend.statusID
WHEN 3 THEN COUNT(Attend.statusID)
END AS fullUnitsUsed,CASE Attend.statusID
WHEN 4 THEN COUNT(Attend.statusID)
WHEN 14 THEN COUNT(Attend.statusID)
WHEN 15 THEN COUNT(Attend.statusID)
WHEN 16 THEN COUNT(Attend.statusID)
WHEN 17 THEN COUNT(Attend.statusID)
WHEN 18 THEN COUNT(Attend.statusID)
WHEN 19 THEN COUNT(Attend.statusID)
WHEN 20 THEN COUNT(Attend.statusID)
END AS halfUnitsUsed
FROM Attend INNER JOIN People ON Attend.personID = People.personID
INNER JOIN Property ON Attend.propertyID = Property.propertyID
INNER JOIN NYSDDSORegion ON Property.RegionID = NYSDDSORegion.RegionID
CROSS JOIN OpenDays
WHERE (Attend.attendDate BETWEEN '1/1/2007' AND '12/31/2007')
GROUP BY Property.Name, People.lastName, NYSDDSORegion.Description, People.firstName, OpenDays.monthID, OpenDays.[month], OpenDays.maxOpenDays, Attend.statusID
ORDER BY Property.Name, fullName, NYSDDSORegion.Description
Hi,
I need to UPDATE the IP Address of a newly created user into a table (the value is currently set to default - " Not Available"), and I really dont know the syntax required to do this. So far I've derived all the variables needed using the following code:
protected void ContinueButton_Click(object sender, EventArgs e)
{
//Get the ip address and put it into the customer table - (the instance of this user now exists)
MembershipUser _membershipUser = Membership.GetUser();
Guid UserId = (Guid)_membershipUser.ProviderUserKey;<--------------------------------------------------------------I can see the UserId here if I pause the prog
SqlDataSource customerDataSource = new SqlDataSource();
customerDataSource.ConnectionString = ConfigurationManager.ConnectionStrings["ConnectionString"].ToString();
customerDataSource.UpdateParameters.Add("IPAddress", Request.UserHostAddress.ToString());<---------------------------------------I can see the IPAddress here
customerDataSource.UpdateCommandType = SqlDataSourceCommandType.Text;
what next
I've not got a clue as to what to write next. There is a try / catch statement after this using :
rowsAffected = customerDataSource.Update();
which remains at 0 no matter what I try.
Any help greatly appreciated.