I have a temp table like this
CREATE TABLE #Temp
(
ID int,
Source varchar(50),
Date datetime,
CID varchar(50),
Segments int,
Air_Date datetime,
[code]....
Getting Error
Msg 102, Level 15, State 1, Procedure PublishToDestination, Line 34 Incorrect syntax near 'd'.
Below is my table structure. And I am inserting data from other temp table.
CREATE TABLE #revf (
[Cusip] [VARCHAR](50) NULL, [sponfID] [VARCHAR](max) NULL, GroupSeries [VARCHAR](max) NULL, [tran] [VARCHAR](max) NULL, [AddDate] [VARCHAR](max) NULL, [SetDate] [VARCHAR](max) NULL, [PoolNumber] [VARCHAR](max) NULL, [Aggregate] [VARCHAR](max) NULL, [Price] [VARCHAR](max) NULL, [NetAmount] [VARCHAR](max) NULL,
[Code] ....
Now in a next step I am deleting the records from #revf table. Please see the delete code below
DELETE
FROM #revf
WHERE fi_gnmaid IN (
SELECT DISTINCT r2.fi_gnmaid
FROM #revf r1, #revf r2
[Code] ...
I don't want to create this #rev table so that i can avoid the delete statement. But data should not affect. Can i rewrite the above as below:
SELECT [Cusip], [sponfID], GroupSeries, [tran], [AddDate], [SetDate], [PoolNumber], [Aggregate], [Price], [NetAmount], [Interest],
[Coupon], [TradeDate], [ReversalDate], [Description], [ImportDate], MAX([fi_gnmaid]) AS Fi_GNMAID, accounttype, [IgnoreFlag], [IgnoreReason], IncludeReversals, DatasetID, [DeloitteTaxComments], [ReconciliationID],
[Code] ....
If my above statement is wrong . Where i can improve here? And actually i am getting 4 rows difference.
I want to insert the data from temp table to other table. Only condition is, it needs to sorted based on tool number and tool date. For example if we have ten records for tool number 1000, it should be order by tool number and then based on tool_dt. Both tables doesn't have any primary keys. Please find below my code. I removed all the unnecessary columns for simple understanding. INSERT INTO tool_summary (tool_nbr, tool_dt) select tool_nbr, tool_dt from #tool order by tool_nbr, tool_dt...But this query is not working as expected. Data is getting shuffled.
Actual Data
Expected Result
1000
1-Aug
1000
1-Feb
1000
1-Jul
1000
[code]....
I want to create index for hash table (#TEMPJOIN2) to reduce the update query run time. But I am getting "Warning!
The maximum key length is 900 bytes. The index 'R5IDX_TMP' has maximum length of 1013 bytes. For some combination of large values, the insert/update operation will fail". What is the right way to create index on temporary table.
Update query is running(without index) for 6 hours 30 minutes. My aim to reduce the run time by creating index.
And also I am not sure, whether creating index in more columns will create issue or not.
Attached the update query and index query.
CREATE NONCLUSTERED INDEX [R5IDX_TMP] ON #TEMPJOIN2
(
[PART] ASC,
[ORG] ASC,
[SPLRNAME] ASC,
[REPITEM] ASC,
[RFQ] ASC,
[Code] ....
I have a table called ADSCHL which contains the school_code as Primary key and other two table as
RGDEGR(common field as SCHOOl_code) and RGENRl( Original_school_code) which are refrencing the ADSCHL. if a school_code will be updated both the table RGDEGR (school_code) and RGERNL ( original_schoolcode) has to be updated as well. I have been provided a new data that i have imported to SQL server using SSIS with table name as TESTCEP which has a column name school_code. I have been assigned a task to update the old school_code vale ( ADSCHL) with new school_code ( TESTCEP) and make sure the changes happen across all 3 tables.
I tried using Merge Update function not sure if this is going to work.
Update dbo.ADSCHL
SET dbo.ADSCHL.SCHOOL_CODE = FD.SCHOOL_Code
FROM dbo.ADSCHL AD
INNER JOIN TESTCEP FD
ON AD.SCHOOL_NAME = FD.School_Name
Inside of stored procedure you have the code
create table #datatable (id int,
name varchar(100),
email varchar(10),
phone varchar(10),
cellphone varchar(10),
none varchar(10)
);
insert into #datatable
exec ('select *
from datatable
where id = 1')
select * from #datatable
I still want to retrieve the data and present it in the software's presentation layer but I still want to remove the temp table in order to reduce performance issue etc.
If I paste the code DROP
TABLE #datatable after
insert into #datatable
exec ('select *
from datatable
where id = 1')
Does it gonna work to present the data in the presentation layer after removing the temp table?
The goal is to retrieve the data from a stored procedure and present it in the software's presentation layer and I still need to remove the temptable after using it because I will use the SP many time in production phase.
[URL]
I have a Custom .net assembly which retrieves some data, basically just a set of data containing, ID, value,
I need my stored procedure to return this data as a table.
My question what/how is fastest way to do this, my assembly can return anything you want, a datatable, a hashtable, list of(class) etc..
Hello
Is it possible to insert data into a temp table with data returned from a stored procedure joined with data from another table?
insert #MyTempTable
exec [dbo].[MyStoredProcedure] @Par1, @Par2, @Par3
JOIN dbo.OtherTable...
I'm missing something before the JOIN command. The temp table needs to know which fields need be updated.
I just can't figure it out
Many Thanks!
Worf
I have a table in different databases with the same name. My goal is to compare the two tables, and insert a record into the second table where there is not a match in the first table. So far, my query looks like the following:
SELECT [metal] FROM [ProductionDatabase].[dbo].[Metalurgy]
EXCEPT
SELECT [metal] FROM [TestDatabase].[dbo].[Metalurgy]
This gives me a list of records from [Production].[dbo].[Metalurgy] which do not reside in [TestDatabase].[dbo].[Metalurgy]. Now, I need to use that list to insert missing records into [TestDatabase].[dbo].[Metalurgy]. How can I modify the above code to INSERT the missing records?
I have 4 rows below in file tblTEST, and I want to be able to transfer the CODE from the MAIN location to the INT location (replacing all existing "A" codes), preceeded by an "I".
ID LOC CODE
-- ----- ------
11 MAIN B
11 INT A
22 MAIN C
22 INT A
I want the result to be:
ID LOC CODE
-- ----- ------
11 MAIN B
11 INT IB
22 MAIN C
22 INT IC
I am stumped as to how to do this - any help or advice would be appreciated.
The only thing I've come up with is:
UPDATE S
SET s.code = B.code
FROM tbltest B
LEFT OUTER JOIN tbltest S ON B.id = S.id
WHERE (S.loc = 'INT')
But when I run it, it says "0 rows affected".
I have been tasked with writing an update query to update a table with more than 150 million rows of data. Here are the table structures:
Source Tables :
OC
CREATE TABLE [dbo].[OC](
[OC] [nvarchar](255) NULL,
[DATE DEBUT] [date] NULL,
[DATE FIN] [date] NULL,
[Code Article] [nvarchar](255) NULL,
[INSERTION] [nvarchar](255) NULL,
[Code] ....
The update requirement is as follows:
DECLARE @Counter INT=0 --This causes the @@rowcount to be > 0
while @@rowcount>0
BEGIN
SET rowcount 10000
update r
set Comp=t.Comp
[Code] ....
The update took more than 48h and didn't terminate , how to accelerate it ?
I have tables and a function as representated by the code below. The names for objects here are just for representation and not the actual names of objects. Table RDTEST may have one or multiple values for RD for each PID. So the function GIVERD will return one or multiple values of RD for each value of PID passed to it.
When I run the following query, I get the required result except the rows for CID 500 for which PID is NULL in table T1. I want the rows for CID 500 as well with PID values as NULL.
SELECT A.CID,
A.ANI,
A.PID,
B.RD
FROM T1 AS A CROSS APPLY GIVERD(A.PID) B
CREATE TABLE [DBO].[RDTEST](
[PID] [INT] NULL,
[RD] [INT] NULL
)
[Code] ....
Table :StudentTeacherRelation
Id StdId TeacherName Day subject
1 1 Archana Monday English
2 1 Archana Tue Marathi
3 1 Shama Wed Hindi
4 1 shama Thus Hindi
5 1 Kavita Fri Hindi
6 2 Archana Mon english
7 2 Dipti Tues Hindi
Second table : Student
Id Sname Cid
1 Shalini 1
2 Monika 1
3 Rohan 3
I want to fetch uniq combination of stuid and subject.Result should show all subject of student whether may be teachername and day. If I choose shalini whose stuid is 1,all subject for shalini(hindi,english,marathi) should come. Record from either of three should come
Id StdId TeacherName Day subject
3 1 Shama Wed Hindi
4 1 shama Thus Hindi
5 1 Kavita Fri Hindi
I want fetch studentname along with teachername,day and subject whose cid = 1 here is my query
select Student.Sname,TeacherName, Day,subject
from StudentTeacherRelation
inner join Student
Student.id = StudentTeacherRelation.StuId
where cid = 1
I want place result of it in temp,Want fetch max(id) from temp table by doing group by on Sname and Subject.find all id from temp table where that id present in max id.
show
Id StdId TeacherName Day subject
where (1,2,3,4,5,6,7-- all id from temp) in (1,2,5,6,7 -- max id from temp by doing group by on Sname and subject)
So it will show record Id StdId TeacherName Day subject where id is 1,2,5,6,7.Only five record should come.How to do that?
Hi thereApplication : Access v2K/SQL 2KJest : Using sproc to append records into SQL tableJest sproc :1.Can have more than 1 record - so using ';' to separate each linefrom each other.2.Example of data'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;'HARLEY.I',03004,'A000-AA00',2003-08-29,0,0,7.5,7.5,7.5,7.5,7.0,'Notes','General',1,2,3 ;3.Problem - gets to lineBEGIN TRAN <---------- skipsrestINSERT INTO timesheet.dbo.table14.Checked permissions for table + sproc - okWhat am I doing wrong ?Any comments most helpful......CREATE PROCEDURE [dbo].[procTimesheetInsert_Testing](@TimesheetDetails varchar(5000) = NULL,@RetCode int = NULL OUTPUT,@RetMsg varchar(100) = NULL OUTPUT,@TimesheetID int = NULL OUTPUT)WITH RECOMPILEASSET NOCOUNT ONDECLARE @SQLBase varchar(8000), @SQLBase1 varchar(8000)DECLARE @SQLComplete varchar(8000) ,@SQLComplete1 varchar(8000)DECLARE @TimesheetCount int, @TimesheetCount1 intDECLARE @TS_LastEdit smalldatetimeDECLARE @Last_Editby smalldatetimeDECLARE @User_Confirm bitDECLARE @User_Confirm_Date smalldatetimeDECLARE @DetailCount intDECLARE @Error int/* Validate input parameters. Assume success. */SELECT @RetCode = 1, @RetMsg = ''IF @TimesheetDetails IS NULLSELECT @RetCode = 0,@RetMsg = @RetMsg +'Timesheet line item(s) required.' + CHAR(13) + CHAR(10)/* Create a temp table parse out each Timesheet detail from inputparameter string,count number of detail records and create SQL statement toinsert detail records into the temp table. */CREATE TABLE #tmpTimesheetDetails(RE_Code varchar(50),PR_Code varchar(50),AC_Code varchar(50),WE_Date smalldatetime,SAT REAL DEFAULT 0,SUN REAL DEFAULT 0,MON REAL DEFAULT 0,TUE REAL DEFAULT 0,WED REAL DEFAULT 0,THU REAL DEFAULT 0,FRI REAL DEFAULT 0,Notes varchar(255),General varchar(50),PO_Number REAL,WWL_Number REAL,CN_Number REAL)SELECT @SQLBase ='INSERT INTO#tmpTimesheetDetails(RE_Code,PR_Code,AC_Code,WE_Da te,SAT,SUN,MON,TUE,WED,THU,FRI,Notes,General,PO_Nu mber,WWL_Number,CN_Number)VALUES ( 'SELECT @TimesheetCount=0WHILE LEN( @TimesheetDetails) > 1BEGINSELECT @SQLComplete = @SQLBase + LEFT( @TimesheetDetails,Charindex(';', @TimesheetDetails) -1) + ')'EXEC(@SQLComplete)SELECT @TimesheetCount = @TimesheetCount + 1SELECT @TimesheetDetails = RIGHT( @TimesheetDetails, Len(@TimesheetDetails)-Charindex(';', @TimesheetDetails))ENDIF (SELECT Count(*) FROM #tmpTimesheetDetails) <> @TimesheetCountSELECT @RetCode = 0, @RetMsg = @RetMsg + 'Timesheet Detailscouldn''t be saved.' + CHAR(13) + CHAR(10)-- If validation failed, exit procIF @RetCode = 0RETURN-- If validation ok, continueSELECT @RetMsg = @RetMsg + 'Timesheet Details ok.' + CHAR(13) +CHAR(10)/* RETURN*/-- Start transaction by inserting into Timesheet tableBEGIN TRANINSERT INTO timesheet.dbo.table1select RE_Code,PR_Code,AC_Code,WE_Date,SAT,SUN,MON,TUE,WE D,THU,FRI,Notes,General,PO_Number,WWL_Number,CN_Nu mberFROM #tmpTimesheetDetails-- Check if insert succeeded. If so, get ID.IF @@ROWCOUNT = 1SELECT @TimesheetID = @@IDENTITYELSESELECT @TimesheetID = 0,@RetCode = 0,@RetMsg = 'Insertion of new Timesheet failed.'-- If order is not inserted, rollback and exitIF @RetCode = 0BEGINROLLBACK TRAN-- RETURNEND--RETURNSELECT @Error =@@errorprint ''print "The value of @error is " + convert (varchar, @error)returnGO
View 2 Replies View RelatedIf on the source I have a new column, the script generated by SqlPackage.exe recreates the table on the background with moving the data into a temp storage. If the table is big, such approach can cause issues.
Example of the script is below: in the source project I added columns [MyColumn_LINE_1] and [MyColumn_LINE_5].
Is there any way I can make it generating an alter statement instead?
BEGIN TRANSACTION;
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
SET XACT_ABORT ON;
CREATE TABLE [dbo].[tmp_ms_xx_MyTable] (
[MyColumn_TYPE_CODE] CHAR (3) NOT NULL,
[Code] ....
The same script is generated regardless the table having data or not, having a clustered or nonclustered PK.
In my sp I'm have an Insert statement. In the event that after the insert @@rowcount = 0 I'm throwing an error with RAISEERROR.
This is fine, however, in my CATCH block I'm referencing a local temp table but getting an error that it no longer exists.
My question is, does throwing an error drop any #temp tables? I thought they were in scope for the session?
What is the best way to drop a temp table if it exists? I am looking something similar to this: if exists (select top 1 * from #TableName) then drop #TableName else end
View 5 Replies View RelatedDECLARE @Query varchar(8000)
Create Table
#tempCountRichard (Status varchar(50), Number Varchar(1000)
Set @Query = 'Insert Into #tempCountRichard
Select Count(Status),
[code]...
With the following SQL. When I select from the temp table I return the right count but my second column doesn't return anything.
Count Status
1010 2000
1111 2222
When I run the query that is being inserted into the the temp table I return the correct results
Count Status
1010 Pass
2000 Pass with Obs
1111 Fail
2222 None
how to select the data from the temp table exactly the same way it was inserted. As I need to select the exact same data from the insert.
Hello guys..
Can u plz help me by giving me an idea how i can copy the temp table data to permanent table
Thanks,
sohails
WE have a job that loads data from an Oralce DB into our SQL Server 2000 DB twice a day. The schedule has just changed so that now there is a possibility of having my west coast users impacted when it runs at 5 PM PST and my east coast users impacted when it runs at 7 AM EST. As a workaround, I have developed a DTS package that loads the data into temp tables instead of the real tables. IE. Oracle -> XTable_temp instead of Oracle -> XTable. The load sometimes takes about an hour to an hour and a half to load, so this solution works great, but I want to then lock the table, delete it and rename the temp table to table X. The pseudo code would be:
Begin Transaction
Lock Table XTable
Drop XTable
Alter Table XTable_temp rename to XTable
Release Lock XTable
End Transaction
Create XTable_temp
I see two issues with this solution. 1) I think if I can lock XTable that the lock would be released when the table is dropped and the XTable_temp was being renamed. 2) I can't find a command to rename a table.
Any ideas on a process that might help?
TIA,
A
I would like to update the flag of the promotion ID should the promotion ID date range overlap with Promotion ID(All) Date Range. The general logic is as below.
Update TableName
SET PromotionID Flag = 1 AND Reason = 'Overlap with row ID(Overlap row ID number)'
Where EACH ROW(Except with Promotion ID ALL) Date Range Overlap with ROW(with promotion ID ALL) Date range
Note: ROW is Partition By ColumnA,ColumnB
TableName: PromotionList
ID PromotionID StartDate EndDate ColumnA ColumnB Flag Reason
1 1 2015-04-05 2015-05-28 NULL NULL 0 NULL
2 1 2015-04-05 2015-04-23 2 3 0 NULL
3 2 2015-05-04 2015-07-07 2 3 0 NULL
4 ALL 2015-04-05 2015-04-28 NULL NULL 0 NULL
5 ALL 2015-07-06 2015-07-10 2 3 0 NULL
6 1 2015-02-03 2015-03-03 NULL NULL 0 NULL
Expected outcome after performing update on the table
ID PromotionID StartDate EndDate ColumnA ColumnB Flag Reason
1 1 2015-04-05 2015-05-28 NULL NULL 1 Overlap with row ID 4
2 1 2015-04-05 2015-04-23 2 3 0 NULL
3 2 2015-05-04 2015-07-07 2 3 Overlap with row ID 5
4 ALL 2015-04-05 2015-04-28 NULL NULL 0 NULL
5 ALL 2015-07-06 2015-07-10 2 3 0 NULL
6 1 2015-02-03 2015-03-03 NULL NULL 0 NULL
I'm trying to update a table from a temporary table but I'm struggling a little with the syntax. Here's what I have so far:
DECLARE @WeekNo INT
SET @WeekNo = 1
WHILE @WeekNo <= 53
BEGIN
SET @SQL = 'UPDATE [Targets]
SET [Target] = SELECT ISNULL(Week' + Cast(@WeekNo as VarChar(2)) + ', 0) FROM #targets
WHERE [CampaignID] = @CampaignID'
SET @WeekNo = @WeekNo + 1
EXECUTE (@SQL)
END
My temp table gets created OK, it's just setting the 'Target' field to the value of the same field in my temp table.
I get the following errors:
Msg 156, Level 15, State 1, Line 2
Incorrect syntax near the keyword 'SELECT'.
Msg 102, Level 15, State 1, Line 2
Incorrect syntax near ' + Cast(@WeekNo as VarChar(2)) + '.
Can anyone help?
Thanks in advance,
Brett
below is the complete code of two temp talbe , the first temp talbe i created so for others it is easy to see what fields I am copying into the temptable.
So what I am doing is that, copying the values from #RealTable into the #Rpt table. Later I want to check the values into the some column and than on certain condtions I am going to update the values. But the way I am doing is I am using the update statment to change the values, where as I think there must be a better way of doing what I am doing in these codes. So instead of using the updates like 6 times or more I can just use them maybe twice. Or probably not at all.
Please give your idea. Thanks.
Code is running and you can try.
I just depict a litttle code here but in real i have 30 columns and the data is coming from the complex join statments. And I am doin the updates for 8 times.
BEGIN
Create table #RealTable
(
LastName varchar (20)
,Phone varchar (20)
,MissingInfo varchar (100)
,ErrMessage varchar (255)
);
--
Insert INTO #RealTable Values('Abraham','917 250 9999', '1', 'Need More Paper')
Insert INTO #RealTable Values('Sar', '917 999 9999', '2', 'Need ID')
Insert INTO #RealTable Values('John', '732 888 8888', '3', 'Need More Paper')
Insert INTO #RealTable Values ('Sal', '555 555 5555', '4', 'Legal Documentation')
Create table #Rpt
(
LastName varchar(20)
,Phone varchar(20)
,MissingInfo varchar(20)
,ErrMessage varchar(255)
,TextMessage varchar(255)
,CheckMark varchar(1)
)
Insert INTO #Rpt
Select
LastName
,Phone
, MissingInfo
,ErrMessage
,'' AS TextMessage
,'' AS CheckMark
From #RealTable
Select * from #Rpt
--Now i saw the result which is what I have inserted.
--but I want to fill the values of the TextMessage and the CheckMark.
--So there could be a way to do what I am doing following.
Update #Rpt
Set TextMessage='Please send the signed copy'
Where MissingInfo='Need More Paper'
Update #Rpt
Set TextMessage='Send us photo copy of your ID'
Where MissingInfo='Need ID'
Update #Rpt
Set TextMessage='Send the legal copy of the document'
Where MissingInfo='Legal Documentation'
Update #Rpt
set CheckMark='a'
where MissingInfo in ('1','3','4') AND ErrMessage='Need More Paper'
Select * From #Rpt
END
Is it possible to check/notify if something (record) has changed in the linked table (from linked server) and automatically update table in local one?
View 4 Replies View RelatedI have a daily record table (has field Date1, field2Update) and have another table(has field Date2, Flag (value: 0 and non 0 values)
I want to update table1 and set field2Update as somevalue where table2.Flag <> 0
Matrix table has ID column and data below.
ID Flag TestDate Value Comment
111 2 12/15/2014 7.5 null
222 2 Null 10 received
Matrix_Current table could have 1 or multiple rows as below.
ID Flag TestDate Value Comment
111 2 01/26/2015 7.9
111 2 02/23/2015 7.9
111 2 04/07/2015 6.8
222 1 null 8 test comment 1
222 3 null 9 test comment 2
When I run below update
UPDATE AM
SET M.Flag = MC.Flag, M.TestDate = MC.TestDate,
M.Value = MC.Value, M.comment = MC.Comment
FROM dbo.Matrix M inner join dbo.Matrix_Current MC on M.ID = MC.ID
Matrix table has value below:
ID Flag TestDate Value Comment
111 2 01/26/2015 7.9
222 1 Null 8 test comment 1
I want to update Matrix table from all row from Matrix_Current, final table would like below:
ID Flag TestDate Value Comment
111 2 04/07/2015 6.8
222 3 Null 9 test comment 2
I sometimes get the following error from an update statement in astored procedure:Transaction (Process ID 62) was deadlocked on thread | communicationbuffer resources with another process and has been chosen as thedeadlock victim. Rerun the transaction.The isolation level is READ UNCOMMITTED and there are no explicittransactions in the stored procedure. The update statement is asfollows:UPDATE PLSET PL.PL_SI_LAST_YEAR_AMOUNT = #tmpWorkPLPrior.PRIOR_AMOUNTFROM #tmpWorkPLPriorWHERE PL.COMPANY = @compAND PL.PLAN_YEAR = @yearAND PL.FORECAST_QUARTER = @qtrAND PL.VERSION_ID = @verAND PL.BUSINESS_UNIT_CODE = #tmpWorkPLPrior.BUSINESS_UNITAND PL.PROJECT_ID = #tmpWorkPLPrior.PROJECT_IDAND PL.BUDGET_CODE = #tmpWorkPLPrior.BUDGET_CODEAND PL.BUSINESS_UNIT_CODE <> 'G7'PL rows: 24,342,553PL rows - Filtered: 230,088#tmpWorkPLPrior rows: 3,641Updated rows: 43,692The temp table (#tmpWorkPLPrior) is created by a SELECT INTO statement.It has the values that need to be set in the PL table. The PL tablehas a clustered index on 8 columns. The filters (@comp, @year, ...)select 230,088 rows. When the update succeeds it updates 43,692 rowsin about 15 seconds. Why does this sometimes deadlock and other timessucceed? There is nothing else running, so the process is deadlockingon itself.Thanks,Frank
View 4 Replies View RelatedHi everyone, I'm fairly new to sql and right now I am struggling with a script. I am trying to extract data from a normal table into a temporary table, update it in the temporary table, then put it back into the normal table. I'll display my code, let me know what you think, any suggestions are appreciated. Thanks a lot.
Create table scripts (
UserID int,
UserName char(50),
ScrRan char(50),
StartTime datetime default getdate(),
EndTime datetime);
Create table errors (
ID int,
UserName char(50),
UserLogin char(50),
ErrorNumber int,
Message char(100),
TimeOfError datetime default getdate());
declare @error int
declare @msg varchar(100)
declare @startTime datetime
declare @endTime datetime
select @startTime = getDate()
SELECT *
INTO #Temp
FROM Publisher
WHERE pub_Name = 'Scene Publishing'
UPDATE #Temp
SET pub_Name = UPPER(pub_Name)
SELECT *
INTO Publisher
FROM #Temp
--Begins Error Checking Routine
select @error = @@error
IF @error <> 0
BEGIN
select @msg ='error: ' + convert(varchar(7), @error) +
''
insert into errors values (@@SPID, USER, USER_NAME(), @error,
@msg, getDate())
END
ELSE
BEGIN
select @endTime = getDate()
insert into scripts values (@@SPID, SYSTEM_USER, @startTime, @endTime)
END
select * from errors
select * from scripts
lost and loaded.
I am trying to update a table in one database with data from a temporary table which i created in the tempdb.
I want to update field1 in the table with the tempfield1 from the #temp_table
The code looks something like this:
Use master
UPDATE [dbname].dbo.table
SET [dbname].dbo.table.field1 = [tempdb].dbo.#temp_table.tempfield1
WHERE ( [dbname].dbo.table.field2= [tempdb].dbo.#temp_table.tempfield2
AND [dbname].dbo.table.field3= [tempdb].dbo.#temp_table.tempfield3
AND [dbname].dbo.table.field4= [tempdb].dbo.#temp_table.tempfield4)
I get the following error:
Msg 4104, Level 16, State 1, Line 2
The multi-part identifier "tempdb.dbo.#temp_table.tempfield2" could not be bound.
Msg 4104, Level 16, State 1, Line 2
The multi-part identifier "tempdb.dbo.#temp_table.tempfield3" could not be bound.
Msg 4104, Level 16, State 1, Line 2
The multi-part identifier "tempdb.dbo.#temp_table.tempfield4" could not be bound.
What is wrong?
I'm trying to fill a temp table whose columns are the same as another table plus it has one more column. The temp table's contents are those rows in the other table that meet a particular condition plus another column that is the name of the table that is the source for the rows being added.
Example: 'permTable' has col1 and col2. The data in these two rows plus the name of the table from which it came ('permTable' in this example) are to be added to #temp.
Data in permTable
col1 col2
11, 12
21, 22
Data in #temp after permTable's filtered contents have been added
TableName, col1 col2
permTable, 11, 12
permTable, 21, 22
What is the syntax for an insert like this?
How do I do a bulk insert into a temp table from a text file. Text file looks like that:
ver_id TYPE
E57AB326-803C-436E-B491-398A255C919A 58
34D2A601-6BBA-46B1-84E1-3A805FDA3812 58
986E140C-62F1-48F1-B428-3571EBF00DA0 58
My statement looks like this:
CREATE TABLE [dbo].[tblTemp]([ver_id] [nvarchar](255), [TYPE] [smallint])
GO
BULK INSERT [dbo].[tblTemp]
FROM 'C:v2.txt'
I keep receiving errors.
The error I receive is: Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 2 (TYPE).
I have a temp table with the following columns and data
drop table #temp
create table #temp (id int,DLR_ID int,KPI_ID int,Brnd_ID int)
insert into #temp values (1,2343,34,2)
insert into #temp values (2,2343,34,2)
insert into #temp values (3,2343,34,2)
[Code]....
I use the rank function on that table and get the following results
select rank() over (order by DLR_ID,KPI_ID,BRND_ID ) Rown,* from #temp
I am interested only in Rown and Id columns. For each Rown number, I need to get the min(ID) in the second column and the duplicate ID should be in 3rd column as shown below.If i have 3 duplicate IDs , I should have 3 rows with 2nd column being the min(id) and 3rd column having one of the duplicate ids in ascending order(as shown in Rown=6)
I pulled some examples of using a subquery pivot to build a temp table, but cannot get it to work.
IF OBJECT_ID('tempdb..#Pyr') IS NOT NULL
DROP TABLE #Pyr
GO
SELECT
vst_int_id,
[4981] AS Primary_Ins,
[4978] AS Secondary_Ins,
[code]....
The problems I am having are with the integer data being used to create temp table fields. The bracketed numbers on line 7-10 give me an invalid column name error each. In the 'FOR', I get another error "Incorrect syntax near 'FOR'. Expecting '(', or '.'.". The first integer in the "IN" gives me an "Incorrect syntax near '[4981]'. Expecting '(' or SELECT". I will post the definitions from another effort below.
CREATE TABLE #Pyr
(
vst_int_idINTEGERNOT NULL,
--ivo_int_idINTEGERNOT NULL,
--cur_pln_int_idINTEGERNULL,
--pyr_seq_noINTEGERNULL,
[code]....
SQL Server 2008 R2.