I have a table like this :
reg.no | description | start_date | end_date | load_date
I want to join this table with itself on reg. no. But not all the rows in table must be joined.
But for example, rows with load_date 01-07-2015 to be joined with rows with load_date 02-07-2015. And the rest of the rows should not used in join (for example, rows having other load_dates)
Is this possible ? and how?
I was writing a query using both left outer join and inner join. And the query was ....
SELECT
S.companyname AS supplier, S.country,P.productid, P.productname, P.unitprice,C.categoryname
FROM
Production.Suppliers AS S LEFT OUTER JOIN
(Production.Products AS P
INNER JOIN Production.Categories AS C
[code]....
However ,the result that i got was correct.But when i did the same query using the left outer join in both the cases
i.e..
SELECT
S.companyname AS supplier, S.country,P.productid, P.productname, P.unitprice,C.categoryname
FROM
Production.Suppliers AS S LEFT OUTER JOIN
(Production.Products AS P
LEFT OUTER JOIN Production.Categories AS C
ON C.categoryid = P.categoryid)
ON
S.supplierid = P.supplierid
WHERE
S.country = N'Japan';
The result i got was same,i.e
supplier country productid productname unitprice categorynameSupplier QOVFD Japan 9 Product AOZBW 97.00 Meat/PoultrySupplier QOVFD Japan 10 Product YHXGE 31.00 SeafoodSupplier QOVFD Japan 74 Product BKAZJ 10.00 ProduceSupplier QWUSF Japan 13 Product POXFU 6.00 SeafoodSupplier QWUSF Japan 14 Product PWCJB 23.25 ProduceSupplier QWUSF Japan 15 Product KSZOI 15.50 CondimentsSupplier XYZ Japan NULL NULL NULL NULLSupplier XYZ Japan NULL NULL NULL NULL
and this time also i got the same result.My question is that is there any specific reason to use inner join when join the third table and not the left outer join.
I am using stored procedure to load gridview but problem is that i am not getting all rows from first table[ Subject] on applying conditions on second table[ Faculty_Subject table] ,as you can see below if i apply condition :-
Faculty_Subject.Class_Id=@Class_Id
Then i don't get all subjects from subject table, how this can be achieved.
Sql Code:-
GO
ALTER Proc [dbo].[SP_Get_Subjects_Faculty_Details]
@Class_Id int
AS BEGIN
[code] ....
I have the following 2 tables:
Location:
Policy:
1 Location can be attached to many policies.
I need to create a query to get 1 row per location and get the minimum PolicyBookingDt and RowUpdateDt from the policy table. All the attributes from the Location table should also be from the Policy that has the minimum PolicyBookingDt.
So from the above example, i need to get the following:
Getting a little confused on how to create the syntax for this.
I have table A with colums ID and Product. I have table B with ID (same as table A) and revenue of product.
I need to update the field Product of table A with the revenue of table B.
I'm confuse with the update joining both tables. I tried this, but obviously has an error:
Update A set Product=B.Revenue where A.ID=B.ID
I have a criteria where i want to join table 1 with table 2 , table 1 consists of products which were given to salesman to sell and table 2 has the sales data which salesman has sold out. Now i want to know left over products of each sales with join .Below is my data, here is what i am trying to do, but it return only salesman 1 data.
CREATE TABLE Salesman_Product
(
SalesManID int,
ProductID int
)
INSERT INTO Salesman_Product (SalesManID,ProductID) Values (1,1),(1,2),(1,3),(1,4)
INSERT INTO Salesman_Product (SalesManID,ProductID) Values (2,1),(2,2),(2,3),(2,4)
[code]....
I would like to compare values in the same table and get the single record with different values in the multiple columns.For table tab1, ID is my key column. If type1 is active (A) then i need to update X else blank on Code1 column and if type2 is active (A) then i need to update X else blank on code2 column. Both type1 and type2 comes from same table for same ID..Below is the example to understand my scenario clearly....
declare @tab1 table (ID varchar(20), dt date, status varchar(1), type varchar(10))
insert into @tab1 values ('55A', '2015-07-30', 'A', 'type1')
insert into @tab1 values ('55A', '2015-07-30', 'C', 'type2')
insert into @tab1 values ('55B', '2015-07-30', 'C', 'type1')
insert into @tab1 values ('55B', '2015-07-30', 'A', 'type2')
[code]....
I have two linked tables from two different databases, there is a column "product" on each table however the product on one table has a Prefix so not a direct match. How can I join these tables ? In the query I have used product2: Replace([scheme_pos.product],"-B","") then tried Joining on product2 but it says JOIN not supported.
View 2 Replies View RelatedI am still new to SQL and I am having trouble obtaining the results I need from a query. I have worked on this command for some time and searched the internet but cannot seem to still get it correct.
I have a table called Patient. It's primary key is pat_id.
I have a second table called Coverage. It has no primary key. The foreign keys are pat_id, coverage_plan_id, and hosp_status.
I have a third table called Coverage_History. It has a primary key consisting of pat_id, hosp_status, copay_priority, and effective_from.
I want to get the pat_id and all the coverage information that is current. The coverage table contains specific insurance policy information. The coverage_history table will indicate the effective dates for the coverage. So the tables could contain something like this:
Patient (pat_id and lname)
P123 Monto
P124 Minto
P125 Dento
P126 Donto
Coverage (pat_id, coverage_plan_id, hosp_status, policy_num)
P123 MED1 OP A1499
P123 ACT4 OP H39B
P124 MED1 OP C90009
P124 RAC OP 99KKKK
P124 RAC OP 99KKKK
P124 MED1 OP C90009
P125 ARP OP G190
P126 BCB OP H88
Coverage_History (pat_id, hosp_status, copay_priority, effective_from, coverage_plan_id, effective_to)
P123 OP 1 20150102 MED1 NULL
P123 OP 2 20150102 ACT4 NULL
P124 OP 1 20150203 RAC 20150430
P124 OP 2 20150203 MED1 20150430
P124 OP 1 20150501 MED1 NULL
P124 OP 2 20150501 RAC NULL
P125 OP 1 20150801 ARP NULL
P126 OP 1 20150801 BCB 20160101
select p.pat_id, p.lname, ch.coverage_plan_id, ch.hosp_status, ch.effective_from, ch.effective_to, ch.copay_priority,
from patient p
left join
( coverage_history ch left join coverage c on ch.coverage_plan_id = c.coverage_plan_id and ch.patient_id = c.patient_id and
(ch.effective_to is NULL or ch.effective_to >= getdate()
)
) on ch.patient_id = p.patient_id
where ( ch.effective_to is NULL or ch.effective_to >= getdate() )
So I want to see:
P123 Monto MED1 OP 20150102 NULL 1
P123 Monto ACT4 OP 20150102 NULL 2
P124 Minto MED1 OP 20150501 NULL 1
P124 Minto RAC OP 20150501 NULL 2
P125 Dento ARP OP 20150801 NULL 1
P126 Donto BCB OP 20150801 20160101 1
Getting back way too many records with this on - over 4500 and should only be about 350.....
Here's the sql that's not working right:
SELECT c.Name, a.ID, a.Description, s.Status, b.Location, a.scheduleBegin, a.scheduleEnd
from tblEquipments a
inner join tblEquipments_Group U on u.categoryID = a.EquipmentType
inner join tblStatus S on a.status = S.statusID
and u.subCategoryID = @type
inner join tblLocation b on a.status = b.locationID
inner join tblSubCategories c on u.subCategoryID = @type
and c.Parent = @type
The table tblSubCategories has a field Name that I need.
tblSubCategories has a field, Parent, that will = @type
See this post for the other table fields if needed.
http://forums.asp.net/thread/1489880.aspx
If I omit the last inner join, all is ok, but I need that last bit of info - the c.Name.
Suggestions?
Thanks,
Zath
I made a part 2 because it would clear things up I guess.
Right, so I have this SP with
....
Select
ZMZKOrder zk
right join ZMProduct pr on (zk.zkproductid = pr.productid)
...
AND we have
...
Where
((zk.zkmoduleid = @moduleid) or (zk.zkmoduleid is Null))
....
Actually what I want is:
If there really is a corresponding productid (because of the right join, this doesn't have to be true) it must check that this zk.zkmoduleid = @moduleid is true.
And if there is NO corresponing productid, it must check that zk.zkmoduleid is Null is true.
And not both at the same time.
Does anyone have any ideas please?
Hello,
I recently created a linked server to db2. When I do a join on the linked server it is returning to much data.
select * from table1 left join [linkedServer]..Schema.Table as tb1 on table1.id=tb1.id
For now, I had to first get the ids I wanted from table1 and then use a subquery to join table1 on the a result set produced from a query to the linked server that only specified those ids. Below is an example
select * from table1 left join (select col1 from [linkedServer]..Schema.table where id=1 or id=2) as tb1 on table1.id=tb1.id
I'm guessing I have some setting wrong. One of the biggest reasons for me to use the four part name is so I can do joins like the first example.
Please let me know if you have any ideas.
Thanks
I'm writing a query where I have multiple left-outer joins but I keep getting multi-part identifier error. See the query below?
SELECT gl.seg5 Natural
,gl.seg2 Office
,gl.seg3 Dept
,gl.seg4 Team
,gl.seg6 Sub
,gl.seg7 Tkpr
,gl.seg1 Comp
,'CHK' Source
[Code] ....
Errors
Msg 4104, Level 16, State 1, Line 68
The multi-part identifier "csddt.baid" could not be bound.
Msg 4104, Level 16, State 1, Line 68
The multi-part identifier "csddt.cknum" could not be bound.
Msg 4104, Level 16, State 1, Line 68
The multi-part identifier "csddt.ckline" could not be bound.
I am using SQL Server 2008. I have strings like this:
AB-123
CDW-32
declare @First_Part varchar(3)
declare @Second_Part varchar(5)
I want to split the string with delimiter '-' and store as first part and second part.
I saw few sample functions to split a string but these return table of values.
I simply want first part and second part.
In above examples context:
@First_Part = 'AB'
@Second_Part = '123'
Any simple way to do this?
I have a text filed in my table.I have sample data looks like <<some status>> << 3/9/2008 10:00:45 PM>> <<personname>>Im interested in searching <<some status>> and <<personname>> together by skipping date in between so my query set should return status and same person name i m looking for.
View 11 Replies View RelatedI am working on a query that is quite complex. I need the query to return as part of the fields a field that will contain the total percentage of tickets in a version.The query is below
select cat.name as name,count(distinct bug.id) as numberOfBugs,cast(count(bug.id) * 1000.0 / sum(count(bug.id) * 10.0) over() as decimal(10,2))/100 AS qnt_pct, vers.version, dateadd(s,vers.date_order,'1/1/1970') as "Release_Date"
from mantis_bug_table bug
INNER JOIN mantis_category_table cat on cat.id = bug.category_id
LEFT OUTER JOIN mantis_project_version_table vers on vers.project_id = vers.project_id and vers.version = bug.version
[code]....
Hello,
i am facing a bizarre problem, accessing data from a remote server which has been linked to my sql.
My SQL server is 2005 and the remote server is SQL 2000.
i have linked the remote server (called LinkedServer) so that when i run this query:
SELECT * FROM LinkedServer.SomeDB.dbo.SomeTable
executes successfully! However, when i run a similar query like this:
SELECT Column1 AS Col1,
LinkedServer.SomeDB.dbo.SomeTable.Column2 as Col2,
Alias.Column3 as Col3
FROM LinkedServer.SomeDB.dbo.SomeTable
INNER JOIN LinkedServer.SomeDB.dbo.SomeOtherTable1 ON LinkedServer.SomeDB.dbo.SomeTable.Column3 = LinkedServer.SomeDB.dbo.SomeOtherTable1.Column3
INNER JOIN LinkedServer.SomeDB.dbo.SomeOtherTable2 AS Alias
ON LinkedServer.SomeDB.dbo.SomeTable.Column3 = Alias.Column3
It gives me this error:
The multi-part identifier "LinkedServer.SomeDB.dbo.SomeTable.Column2" could not be bound.
The multi-part identifier "LinkedServer.SomeDB.dbo.SomeTable.Column3" could not be bound.
I have noticed that this error is generated only for the selected columns whose path has either been repeated (e.g. "LinkedServer.SomeDB.dbo.SomeTable.Column2" as opposed to "Column2") or for columns which are from aliased tables.
What is going on?!?!?!??!?!?!
Any Help would be tremendously appreciated!!!! 8..)
I have the following table
Table Name EmployeeInformation
EmployeeID EmployeeFirstName EmployeeLastName
1 |John |Baker
2 |Carl |Lennon
3 |Marion |Herbert
Table Name PeriodInformation
PeriodID PeriodStart PeriodEnd
1 |1/1/14 |12/30/14
2 |1/1/15 |12/30/15
[code]...
I want a query to join all this tables based on EmployeeID, PeriodID and LeaveTypeID sum of LeaveEntitlement.LeaveEntitlementDaysNumber based on LeaveTypeID AS EntitleAnnaul and AS EntitleSick and sum AssignedLeave.AssignedLeaveDaysNumber based on LeaveTypeID AS AssignedAnnaul and AS AssignedSick and subtract EntitleAnnaul from AssignedAnnual based on LeaveTypeID AS AnnualBalance and subtract EntitleSick from AssignedSick based on LeaveTypeID AS SickBalance
and the table should be shown as below after executing the query
EmployeeID, EmployeeFirstName, EmployeeLastName, PeriodID, PeriodStart, PeriodEnd, EntitleAnnual, AssignedAnnual, AnnualBalance, EntitleSick, AssignedSick, SickBalance
I have to extract a specific part of a string from a column in a sql server table. Following are the details and I have given the sample table and the sample strings.
I have 2 columns in my table [dbo].[StringExtract] (Id, MyString)
The row sample looks like the following
I have to extract the Id and a part of the column from mystring.
Id MyString
1 ABC|^~&|BNAME|CLIENT1||CLIENT1|20110609233558||BIC^A27|5014589635|K|8.1|
ABC1|^~&|BNAME1|CLIENT1||CLIENT1|20110609233558||CTP^A27|5014589635|I|7.1|
DEF||5148956598||||Apprised|Bfunction1||15|LMP|^^^201106101330|
alloys3^ally^crimson^L||||alloys3^ally^crimson^L||||alloys3^ally^crimson^L|||||Apprised|
[Code] ....
The part I want to extract is in the line "ZZZ" and the string part that i want to extract is between the 5th and 6th pipes (|). So my output looks like the following
Id DesiredString
1 Extracts^This^String1
2 Extracts^This^String2
3 Extracts^This^String3
Is there a way to extract this either using TSQL or SSIS.
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[StringExtract]') AND type in (N'U'))
DROP TABLE [dbo].[StringExtract]
GO
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[StringExtract]') AND type in (N'U'))
BEGIN
CREATE TABLE [dbo].[StringExtract](
[Id] [int] NULL,
[Code] ....
I am writing a stored procedure to prepare some reports.
The issue is that I am summing up the combined bid, 'QuoteTotal' + Sum(InvoiceItemAmount) (eg, quote add ons).
When part of the larger query it returns a different, and incorrect amount. The query listed after the main query is just that line and it's appropriate parts and it returns the correct amount. What can I do to correct this and where lies the problem so I can learn from this situation?
alter PROCEDURE [dbo].[Select_Quote_Info_By_Salesmen_By_Status]
@Salesmen nvarchar(50),
@QuoteStatus nvarchar(50)
AS
BEGIN
SET NOCOUNT ON;
[code]...
I have a string column in a DB where it's values contain the following midway through the string ([DOCUMENTGUID] is a uniqueidentifier that is different for each row):
<a href="../downloadDoc.aspx?dg=[DOCUMENTGUID]" target="_blank">
I would like to replace this part of the string with a different piece of text.
I know that I should be using PATINDEX and REPLACE functions but I don't know how to utilise.
I need to set only the date part of tblEventStaffRequired.StartTime to tblEvents.EventDate while maintaining the time part in tblEventStaffRequired.StartTime.
UPDATE tblEventStaffRequired
SET StartTime = <expression here>
FROM tblEvents INNER JOIN
tblEventStaffRequired ON tblEvents.ID = tblEventStaffRequired.EventID
Below. I have also pasted the current result of this query and the desired result.
Query can be updated to get the desired result as given below?
Query:
Select c.OTH_PAYER_ID, c.PAID_DATE, f.GROUP_CODE, f.REASON_CODE, f.ADJUSTMENT_AMOUNT
From MMIT_CLAIM_ITEM b, mmit_tpl c , mmit_attachment_link d, MMIT_TPL_GROUP_RSN_ADJ f
where b.CLAIM_ICN_NU = d.CLAIM_ICN and b.CLAIM_ITEM_LINE_NU = d.CLAIM_LINE_NUM and c.TPL_TS = d.TPL_TS and f.TPL_TS = c.TPL_TS and b.CLAIM_ICN_NU = '123456788444'
Current Result which I am getting with this query
OTH_PAYER_ID PAID_DATE GROUP_CODE REASON_CODE ADJUSTMENT_AMOUNT
5501 07/13/2015 CO 11 23.87
5501 07/13/2015 PR 12 3.76
5501 07/13/2015 OT 32 33.45
2032 07/14/2015 CO 12 23.87
2032 07/14/2015 OT 14 43.01
Desired/Expected Result for which I need updated query
OTH_PAYER_ID PAID_DATE GROUP_CODE_1 REASON_CODE_1 ADJUSTMENT_AMOUNT_1 GROUP_CODE_2
REASON_CODE_2 ADJUSTMENT_AMOUNT_2 GROUP_CODE_3 REASON_CODE_3 ADJUSTMENT_AMOUNT_3
5501 07/13/2015 CO 11 23.87 PR 12 3.76 OT 32 33.45 2032 07/14/2015 CO 12 23.87 OT 14 43.01
Using DB2.
Msg 240, Level 16, State 1, Line 14
Types don't match between the anchor and the recursive part in column "ParentId" of recursive query "tmp". Below is query,
DECLARE @TBL TABLE (RowNum INT, DataId int, DataName NVARCHAR(50), RowOrder DECIMAL(18,2) NULL, ParentId INT NULL)
INSERT INTO @TBL VALUES
(1, 105508, 'A', 1.00, NULL),
(2, 105717, 'A1', NULL, NULL),
(3, 105718, 'A1', NULL, NULL),
(4, 105509, 'B', 2.00, NULL),
(5, 105510, 'C', 3.00, NULL),
(6, 105514, 'C1', NULL, NULL),
[code]....
I have SSRS 2005 SP2 configured to work in Sharepoint integration. Everything works fine except that I am not able to programmatically change any property of report viewer web part (instance) that I have added on on home page of my sharepoint site.
I can do same thing via sharepoint UI but not through program. When my programs runs it fetches all web parts been added on home page, then I need to iterate through each one and find report viewer web part.
While iterating, as soon as I arrive to report viewer web part it is named as "Error web part" with error message as
"Windows SharePoint Services cannot deserialize the Web Part. Check the format of the properties and try again"
If someone has a solution, please respond at your earlist.
Thanks
Shankar
I have a table with a column named measurement decimal(18,1). If the value is 2.0, I want the stored proc to return 2 but if the value is 2.5 I want the stored proc to return 2.5. So if the value after the decimal point is 0, I only want the stored proc to return the integer portion. Is there a sql function that I can use to determine what the fraction part of the decimal value is? In c#, I can use
dr["measurement "].ToString().Split(".".ToCharArray())[1] to see what the value after the decimal is.
I'm having trouble with a multi-table JOIN statement with more than one JOIN statement.
For each order, I need to return the following: CarsID, CarModelName, MakeID, OrderDate, ProductName, Total ordered the Car Category.
The carid (primary key) and carmodelname belong to the Cars table.
The makeid and orderdate belong to the OrderDetails table.
The productname and carcategory belong to the Product table.
The number of rows returned should be the same as the number of rows in OrderDetails.
I have made the following Scalar-valued function:
CREATE FUNCTION [dbo].[TimeCalc]
(
@OriginalTime AS INTEGER
, @TenthsOrHundredths AS INTEGER -- code 2: 1/10, code 4: 1/100
)
RETURNS NVARCHAR(8)
[Code] ....
What it does is convert numbers to times
E.g.: 81230 gets divided by 10 (times in seconds: 8123). This 1 1 full minute, and the remainder = 2123 making it 1.21.23 mins)
So far so good (function works perfectly)
My question: sometimes times are in 1/100 (like above sample), sometimes in 1/10.
This means that, e.g. with a time like 3.23.40 the last zero must be deleted.
My thoughts are to use the results from the Return Case part, and as the code = 4: leave it as it is,
is the code 2 the use LEFT(... result Return Case ..., Len(..result Return Case.. - 1))
There are 5 codes: 0 1 2 3 and 4
I have used the Microsoft code below to create a link to SQL server from access. I am using DAO not ADODB. Someone said that I should use dblib instead of ODBC in the connection string below in order to get the connection to work.
Does anyone know the correct syntax for OLE DB connection string and can it be used with DAO? I am getting an error "ISAM path not found"?? Seems I have wrong connection string syntax?? Please advise.
Thanks again for your help.
-------------------------------------------------------------------------
Sub ClientServerX3()
Dim dbsCurrent as Database
Dim tdRoy as TableDef
Set dbsCurrent = CurrentDb
Set tdfRoy = dbsCurrent.CreateTableDef("Roy")
tdfRoy.Connect = "ODBC;DATABASE=pubs;UID=sa;PWD=;DSN=Publishers"
***************IS THERE ANYWAY TO USE AN OLEDB (OR OTHER DSN-LESS)
***************CONNECTION HERE? How??
tdfRoy.SourceTableName = "Royalties"
dbsCurrent.TableDefs.Append tdfRoy
End Sub
Tell me please how can I make a foreing key constraint for a table using from another not all primary key or not all data. For example, I need to link a table "subject" with primary key "dscp_num, depart" using depart as a foreing key. But there is no table with such primary key, there is only table "codif_values" where selecting records by condition "codif_num = 1" gives the relation with necesary primary key to link. Also I need to link "subject" table as a primary key table with the table "ses_curr". But this table doesn't include "depart" field. It includes field "reg_num" that is a primary key in table "students". This table include field "stgroup" as a foreing key for table "groups". The last table includes "speciality" field that is a foreing key for table "specialities". And only this table includes "depart" field. Tell me please how I can make a foreing key constraint for table "ses_curr" by table "subject".
View 3 Replies View RelatedI have 2 tables:
create table #InsuredLoc (
PolGK int,
InsuredLocGK varchar(20),
InsuredLocEffDt datetime,
InsuredLocType varchar(20),
InsuredLocStatus varchar(20),
InsuredLocAddress varchar(50),
PolEdrGk varchar(20),
[Code] ...
I will need to join the #InsuredLoc table to the #PolicyEndorsement table using PolGk and PolEdrGk and get the min(BkgDt) and min(PolEdrRowUpdateDt) for the distinct list of InsuredLocType, InsuredLocStatus, and InsuredLocAddress fields from the #InsuredLoc table above.
I will also need the min(InsuredLocEffDt) and the max(InsuredLocUpdateDt) from the #InsuredLoc table for those records. So after the first run, i should get the following:
I tried to use CTE's with ranking, but some records are dropping off and I'm not sure why.
I want to add a new column in a table. In this column I want to include a Total Value. This Total Value exists already for dates after Sept 23, 2013. For dates before Sept 23, 2013 the total can be calculated using the following math:
Total = Total(t-1) - (Resource_Name1-Resource_Name1).
The Resource_Name column contains the Total field (after Sept 23) as well as the Resource_Name1 field. There is a third column called Direction which contains the values injection or withdrawal. The Resource_Name1 differes in value depending on whether it is injection or withdrawal. How do I create a new column with Totals for the full data set?
I have a huge question, it's for my job im doing now. I have a table with the name TWO.dbo.SVC06105. I want to be able to take the word "TWO" and put that into a variable. I know this doesn't look correct, but I want to be able to do something like this:
DECLARE @GPNAME CHAR(100)
SET @GPNAME = 'TWO'
SELECT * FROM @GPNAME.dbo.SVC06105
I know the SELECT statement isn't correct, but I hope that you guys understand what i'm trying to do through this example. BTW, I am new to this team so nice to meet you all. L8er