Transact SQL :: Using A Like Statement In Pivot
Oct 27, 2015
I have a pivot SQL like below SQL Server 2012
SELECT Production_Date, Production_Order, LogicalVat KPI_Category,
'Probiotic Amt Consumed' KPI_Data1_Name,'RC Amt Consumed' KPI_Data2_Name
FROM
( SELECT Production_Date , NULL Production_Order,
LogicalVat, ReportValue ReportValue
FROM BIReports.dbo.r_VatMake
WHERE Production_Date between '10/27/2015' and '10/27/2015'
[code].....
Now the attributes changed into like below where the number after RC is dynamic and I can't use the query above anymore
Example:
RC Amt Consumed - RC 6
RC Amt Consumed - RC 7
RC Amt Consumed - RC 8
Probiotic attribute changed into like below where number after PROB is dynamic
Probiotic Amt Consumed - PROB 15
Probiotic Amt Consumed - PROB 16
Probiotic Amt Consumed - PROB 17
View 5 Replies
ADVERTISEMENT
Oct 2, 2015
I have a table which I would like to group on several columns, and for the Contract number, I'd like a maximum of four different columns which would contain pivoted information.
Here is my DDL:
CREATE TABLE [dbo].[SV00403](
[CUSTNMBR] [char](15) NOT NULL,
[ADRSCODE] [char](15) NOT NULL,
[Contract_Number] [char](11) NOT NULL,
[WSCONTSQ] [int] NOT NULL,
[Code] ....
Here is my select statement:
SELECT[CUSTNMBR]
,[ADRSCODE]
,[Contract_Number]
,[WSCONTSQ]
,[Equipment_ID]
[Code] ...
Here are the results of the select statement:
And here is what the result set is that I would like to achieve:
The yellow indicates the group by columns. How do I pivot the contract number into the four columns noted above ?
View 8 Replies
View Related
Sep 1, 2015
I have one table like this.
-- drop table #temp
create table #temp(ID bigint, Description varchar(50), ET varchar(200), ET_Status varchar(50), ET_Date datetime, ET_IsValid varchar(3))
insert into #temp
select * from (values (1,'Test','A', 'Ack','08/15/2015', 'Yes'),(1,'Test','B', 'Nack','08/17/2015', 'Yes'),(1,'Test','C', 'Ack','08/21/2015', 'Yes')) a(ID, Description, ET, ET_Status, ET_Date, ET_IsValid)
I want to pivot this. My expected result look like this.
ID - Description - ET_A_Status - ET_A_Date
- ET_A_IsValid - ET_B_Status - ET_B_Date
- ET_B_IsValid - ET_C_Status - ET_C_Date
-
ET_C_IsValid
1 - Test - 'Ack' - '2015-08-15 00:00:00.000' - 'Yes' - 'Nack' - '2015-08-17 00:00:00.000' - 'Yes' - 'Ack' - '2015-08-21 00:00:00.000' - 'Yes'
View 6 Replies
View Related
May 13, 2015
I'm trying to Pivot and I keep getting an "Invalid Column Name" error, which I can't figure out since, if I run the query and exclude the Pivot statement, the query runs fine.
Columns
ItemNmbr Char(31) not null
SetupTime_I Numeric(19,5) not null
WCID_I Char(11) not null
select ItemNmbr,SetupTime_I, WCID_I from RT010130
Results
Now run
select ItemNmbr,SetupTime_I, WCID_I
from RT010130
pivot (sum(SetupTime_I) for WCID_I in ([BLA01],[URE02])) PVT
And I get an Invalid Column Name error for both SetupTime_I and WCID_I - which, as far as I can tell, is demonstrably incorrect.
View 5 Replies
View Related
Nov 9, 2015
I have a table similar to below:
itemID | part
1 | A
1 | B
2 | A
2 | A
2 | A
3 | C
I need the table to look like the following:
itemID | part1 | part2 | part 3
1 | A | B | null
2 | A | A | A
3 | C | null | null
There will _never_ be more than three parts to an item, and it does not matter what order they are in.
I cannot get pivot to work for me.
View 2 Replies
View Related
Jul 1, 2015
I have a query that uses the PIVOT function and works fine in SQL 2012. I've been asked to move the query to a database that has the compatibility level set to 80(SQL 2000). I receive an "Incorrect syntax near" error when I try to excute the query on the SQL 2000 database. I would like to duplicate the exiting PIVOT functionality in SQL 2000.The existing query retrieves employee names and the order that the employee should be displayed from a table. The names will appear on the report according to the order that is retrieved from the database. Also, the users have requested that only 5 names appear on each row of the report. This is why the PIVOT function was needed. Below is an example of how the existing query works.
Table
CREATE TABLE [dbo].[EmpGuest](
[Guest_ID] [int] NOT NULL,
[Guest_Name] [varchar](80) NULL,
[Display_Order] [int] NULL
) ON [PRIMARY]
[code]....
View 4 Replies
View Related
Oct 9, 2015
I have a SP that will generate a pivot output. I want to add a grand total at the end row to sum up the counts for each column.
the SP is as below :
/* COLUMN HEADERS*/
DECLARE
@columnHeaders NVARCHAR (MAX)
SELECT
@columnHeaders = COALESCE ( (@columnHeaders) + ',[' + [Date] + ']', '[' + [Date] + ']')
[code]....
I am getting the below error:
Invalid column name 'Grand Total'.
Msg 205, Level 16, State 1, Line 16
All queries combined using a UNION, INTERSECT or EXCEPT operator must have an equal number of expressions in their target lists.
View 10 Replies
View Related
Jun 9, 2015
I am trying to find a solution in order to make a pivot dynamically. One of my department charge every month all the sales figure in one table and I need to pick up the last two months archived in order to make a pivot and to see if something is changed or not. What I am trying to do is to have these last two months dynamically. create table forum (customer varchar (50), nmonth varchar(6), tot int, archived datetime)
insert into forum values ('Pepsi','201503',100,'2015-04-28'),
('Pepsi','201504',200,'2015-04-28'),
('Texaco','201503',600,'2015-04-28'),
('Texaco','201504',300,'2015-04-28'),
[code]...
As you can see I have to change manually the values underlined every months but it's a temporary solution. How can I set up the last two months in a dynamic way?
View 3 Replies
View Related
Apr 23, 2015
I found this Microsoft article for creating crosstab-like queries in SSMS.Is it possible, however, to create this same query if I do not know what the values for the columns will be? Using their example for my problem, I will not know what the values in the "IN" criteria will be because my query would be for a "rolling" 12 months (thus causing that IN criteria to change every month).I've tried declaring variables to pull in the values, but since this will eventually go into a view, I don't think that I can use declared variables.
View 3 Replies
View Related
May 18, 2015
i have a table like below,
CREATE TABLE #ATTTABLE
(
Name VARCHAR(20),
AttDate DATE,
PresntTime TIME
[code]....
and then i pivot table by date as column wise using the below query and also displays total time by rowswise
SELECT t1.*, t2.Total
FROM (
SELECT name,[2015-08-01],[2015-08-02]
FROM (
SELECT name, AttDate,PresentTime
[code]....
now what i need is to display sum of time at last row as well, means total time of against date
View 16 Replies
View Related
Aug 15, 2015
I need to pivot my records in columns into rows. Here is sample data:
create table #columnstorows
(
Payer varchar (5),
ID varchar (5),
ClM varchar (2),
Paid1 float,
Paid2 float,
Paid3 float
)
[code]....
Desired result:
Payer1 Payer2
ID1 ID2
Paid1A Paid1B
Paid2A Paid2B
Paid3A Paid3B
U001 U002
001 002
76.58 19.53
153.48 96.43
53.48 200
View 10 Replies
View Related
Sep 22, 2015
Here is the table:
empid lastname firstname title titleofcourtesy ModifiedOROriginal
1 Davis1 Sara CEO Ms. Modified
1 Davis Sara CEO Ms. Original
We need an output like this:
empid
1
1
lastname
Davis1
Davis
firstname
Sara
Sara
title
CEO
CEO
titleofcourtesy
Ms.
Ms.
ModifiedOROriginal
Modified
Original
View 2 Replies
View Related
May 5, 2015
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
UPDATE TABLE1
SET TABLE1.FIELD2 = 1
ELSE
UPDATE TABLE2
SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
View 7 Replies
View Related
Jul 24, 2015
I have a query which I want to convert It PIVOT query
SELECT Parties.AreaID, Parties.Area, CashSalesDetail.ProductID, CashSalesDetail.ProductName, SUM(CashSalesDetail.Qty) AS QtyFROM CashSalesDetail INNER JOIN CashSales ON CashSalesDetail.CSNo = CashSales.CSNo INNER JOIN Parties ON CashSales.PartyID = Parties.PartyIDWHERE (CashSales.TransDate >= CONVERT(DATETIME, '2014-07-01 00:00:00', 102)) AND (CashSales.TransDate <= CONVERT(DATETIME, '2015-06-30 00:00:00', 102))GROUP BY Parties.AreaID, Parties.Area, CashSalesDetail.ProductID, CashSalesDetail.ProductName
following is my requirement after summing up qty of each area
ProductName area a area b area c
abc 10 0
20
def 1
4 2
ghi 5
3 10
jkl 7
15 3
Note: numeric values are Quantity of each product in each area
View 15 Replies
View Related
Jun 17, 2014
I am using a PIVOT function to obtain the Invoice Values, but they appear in different currencies so need to perform a case function.
But am struggling with the syntax;
This fails a syntax check with
Msg 156, Level 15, State 1, Line 33
Incorrect syntax near the keyword 'Case'.
[Code]....
View 2 Replies
View Related
Jun 23, 2015
Can we use case in pivot like below? I am getting an error. I want to do Pivot on condition basis.
select (
Column1
,Column2
,Column3
,Column4
,coloumn5
from Mytable
) x
pivot
(
case when Column1 = 6 then sum(Column3) else max(Column4) End
for coloumn5 in (' + @COLS + ')
)p
View 2 Replies
View Related
Oct 25, 2006
I am trying to use a Pivot T-SQL statement in the Table Adapter Configuration Wizard in Visual Studio 2005. I get the error message "The Pivot SQL construct or statement is not supported". Then it executes the SQL statement as if there were no error. Unfortunately, it will not create the table adapter because of the error. Below is the T-SQL statement I am using.
SELECT OrderNumber, OrderDate, custlastname, [1001] AS Dept01, [1002] AS Dept02, [1003] AS Dept03, [1004] AS Dept04, [1005] AS Dept05, [1006] AS Dept06, [1007] AS Dept07, [1008] AS Dept08, [1009] AS Dept09, [1010] AS Dept10, [1011] AS Dept11, [1012] AS Dept12
FROM
(SELECT Orders.Ordernumber, Orders.OrderDate, Customer.custlastname, DeptID, OrderDetail.DetailAmount
FROM OrderDetails od JOIN
Orders ON Orders.OrderNumber = od.OrderNumber JOIN
Customer ON Orders.CustomerID = Customer.CustID
WHERE (DATEPART([Year], OrderDate) = '2006')) p
PIVOT (SUM(OrderDetailAmount) FOR DeptID IN ([1001], [1002], [1003], [1004], [1005], [1006],
[1007], [1008], [1009], [1010], [1011], [1012])) AS pvt
ORDER BY OrderNumber
The statement works fine in Management Studio so I know the syntax is correct.
Any Ideas?
Thanks,
James
View 4 Replies
View Related
Oct 30, 2015
I got a table which gets populated by stor proc where we pivot the Sum(Balance of mortgage) by YYYYMM for the whole duration of the loan term.
I have a requirement to rename the column header where the previous month end balance period be renamed to P0.
if we run the report today, then the balance as at 31/09 should show under column P0 which now shows under 201509 and then P0 keeps shifting with each month run.
How do I dynamically rename the column headers.
View 7 Replies
View Related
Jun 17, 2015
I pulled some examples of using a subquery pivot to build a temp table, but cannot get it to work.
IF OBJECT_ID('tempdb..#Pyr') IS NOT NULL
DROP TABLE #Pyr
GO
SELECT
vst_int_id,
[4981] AS Primary_Ins,
[4978] AS Secondary_Ins,
[code]....
The problems I am having are with the integer data being used to create temp table fields. The bracketed numbers on line 7-10 give me an invalid column name error each. In the 'FOR', I get another error "Incorrect syntax near 'FOR'. Expecting '(', or '.'.". The first integer in the "IN" gives me an "Incorrect syntax near '[4981]'. Expecting '(' or SELECT". I will post the definitions from another effort below.
CREATE TABLE #Pyr
(
vst_int_idINTEGERNOT NULL,
--ivo_int_idINTEGERNOT NULL,
--cur_pln_int_idINTEGERNULL,
--pyr_seq_noINTEGERNULL,
[code]....
SQL Server 2008 R2.
View 3 Replies
View Related
May 7, 2015
Have a table with a structure like:
FIELD_A
FIELD_B
FIELD_C
FIELD_D
AMOUNT
DATA_A1
DATA_B1
DATA_C2
DATA_D2
37540
[Code] ....
In such a case, devising a dynamic cross-tab query, to cover all the items, and result like a pivot like the following to represent the data in a multi-header pivot like following:
DATA_C1
DATA_C1
DATA_C1
DATA_C2
DATA_C2
DATA_C2
[Code] ....
View 5 Replies
View Related
Jul 8, 2015
I have some data which is vertical...I want to create a pivot query in SQL that will give me a result that is horizontal like this. I cannot find a way of doing it without lots of IF or CASE statements?
View 10 Replies
View Related
Apr 13, 2006
I have the following data:Product Type Hours Controllers Development 105.0Controllers Research 1.0Controllers Sustaining 24.0How do I use SQL statement to change it to the following?Product Development Research SustainingControllers 105.0 1.0 24.0Thanks.DanYeung
View 2 Replies
View Related
Jun 11, 2014
I want to pivot a table something like this .I pivoted it successfully but the results are not correct.
Here is the example :
install-Name Fiscal year Question Answer
Washington 2010 what is the reason for install? tttttt ggg yttt o
washington 2010 reason id 12345
washington 2010 install start date 10/10/2010
washington 2010 install end date 10/12/2010
washington 2010 install status successfull
[code]....
I want the above data to get pivoted like this
Install-name | Fiscal year |what is the reason for install? | reason id | install start date | install end date |
install status |Do you feel the install is incomplete? | Is the expiration of 90 days exceeded? |
washington | 2010 | tttttt ggg yttt o | 12345 | 10/10/2010 | 10/12/2010 |
successful | | |
washington | 2010 | trtbnbthwgt hrgthjrt | - | 12/3/2010 | 12/8/2010 |
| | |
washington | 2011 | sbjeh dhebwdh dbjw | 345 | 10/10/2010 | 10/12/2010 |
successful | No | Yes ,but b b b b |
View 2 Replies
View Related
Nov 24, 2015
I created a Switch statement below that surprisingly doesn't throw any errors and some of it actually works. The problem is that the function calls in the 3rd and 4th sections of it below (in bold) are not working.
=switch(HASONEVALUE('s1JudgeIds'[JudgeName]),
values('s1JudgeIds'[JudgeName])<>"1 - All Judges" && values('s1Perm1'[Exit])<>"Still in Out-of-Home Care",CALCULATE(count(s1Perm1[entity_id]),FILTER(ALL(Time[ExitMonthCategory]),Time[ExitMonthCategory] <= MAX(Time[ExitMonthCategory]))),
values('s1JudgeIds'[JudgeName])="1 - All Judges" && values('s1Perm1'[Exit])<>"Still in Out-of-Home Care",calculate([Numerator],all('s1JudgeIds'[JudgeName])),
values('s1JudgeIds'[JudgeName])="1 - All Judges" && values('s1Perm1'[Exit])="Still in Out-of-Home Care",calculate([Numerator-stillincare],all('s1JudgeIds'[JudgeName])),
values('s1JudgeIds'[JudgeName])<>"1 - All Judges" && values('s1Perm1'[Exit])="Still in Out-of-Home Care",calculate([Numerator-stillincare])
View 24 Replies
View Related
Mar 11, 2015
How to write a Dynamic Pivot Statement to Calculate and Organize Columns like:
CREATE TABLE #mytable
(
Name varchar(50),
GA int,
GB int,
startdate DATETIME,
enddate DATETIME
[Code] ...
Below is Our Sample Table Data.
Name GAGBstartdateenddate
Pavan 261/1/20151/1/2015
Hema 561/1/20151/1/2015
Surya 501/1/20151/1/2015
Pavan 811/2/20151/8/2015
Hema 311/2/20151/8/2015
Surya 121/2/20151/8/2015
Pavan 1041/9/20151/15/2015
Hema 301/9/20151/15/2015
Surya 6131/9/20151/15/2015
How to write Pivot Satement to get Oupt like below:
1/1/2015 Pavan Hema Surya SumTotal
Total 8 11 5 24
GA 2 5 5 12
GB 6 6 0 12
1/8/2015 Pavan Hema Surya SumTotal
Total 9 4 3 16
GA 8 3 1 12
GB 1 1 2 4
1/15/2015 Pavan Hema Surya SumTotal
Total 14 3 19 36
GA 10 3 6 19
GB 4 0 13 17
View 5 Replies
View Related
Jul 16, 2015
Is there a way we can get Table and Column name in separate column using PIVOT or something?Right now what i have is:
Text QueryPlan Plan_handle
Name Value
select id,name,Address from person <showPlznXML... 010101 Table Person
select id,name,Address from person <showPlznXML... 010101 column id
select id,name,Address from person <showPlznXML... 010101 Table Person
[code]....
View 26 Replies
View Related
May 30, 2006
I need an SQL statement that will allow me to strip out duplicate records based upon a data condition.
Table
PPN_I CPN_I Qty_Required ECN_02
1. ItemA ItemB 1 4506
2. ItemA ItemB 1 3209
3. ItemA ItemB 1 901
4. ItemA ItemD 1 null
5. ItemA ItemD 0 null
6. ItemA ItemF 3 5609
7. ItemA ItemG 1 null
8. ItemB ItemA 1 1725
Okay - I have two conditions I need to enforce
1. A duplicate record is defined as a record where PPN_I and CPN_I have identical ID's. My new DB doesn't allow duplicate records. In order to 'strip' out the unwanted records - I need to enforce a couple of data conditions:
I delete both records for this case only - if qty required =1 and a duplicate record has qty required = 0 then both get deleted. In the above example - records 4 & 5 both get deleted. In all other duplicate record scenarios - I want to keep the record with the highest ECN_02 number. So, records 2 & 3 get deleted because they are duplicate (same PPN_I and CPN_I id's) and their ECN_02 is less than the highest value (4506). If no duplicate record exists - no action taken (records 6,7,8).
So, records 4 & 5 - both get deleted. Records 1,2 & 3 become one record (highest ECN_02) records 1 stays - records 2 & 3 deleted.
8 records become 4.
Any thoughts? How do I 'loop thru the table and identify duplicate records and then enforce some kind of rule?
Any assistance would be appreciated,
Thanks in advance.
View 2 Replies
View Related
Sep 4, 2015
FOR XML Statement I should use to convert data in the below table to generate xml in the given format? Can it be done with a single statement?
Event | Condition | Group |Item |Answer
=======================================
New New GroupA Item1 Y
New New GroupA Item2 Y
New New GroupA Item3 N
New New GroupB Item6 N
New New GroupB Item10 Y
New New GroupB Item30 N
[code]....
View 8 Replies
View Related
Nov 18, 2015
Slow loading issue with an if statement. In the raw data the field [Location] is a text field e.g. 0010. I have a parameterised query that get a Location_Value from Excel and passes it to the PQ query using:
#"Filtered Rows1" = Table.SelectRows(#"Removed Other Columns", each ([SalesMode] = 0) and ([SalesType] = 0) and ([Location] = Location_Value))
This works fine if you chose a single location. However I wanted to be able to select all locations and text is horrible to work with so in PQ I used the change type function to change the location column into whole numbers. I changed excel to also pass a number as Location_Value. I was therefore surprised when the same query took 2.5 times longer to refresh????
My PQ now looks like this
#"Changed Type" = Table.TransformColumnTypes(#"Removed Other Columns",{{"Location", Int64.Type}}),
#"Filtered Rows1" = Table.SelectRows(#"Changed Type", each ([SalesMode] = 0) and ([SalesType] = 0) and ([Location] = Location_Value))
I'm wondering if I need to do something to the ([Location] = Location_Value) bit as maybe it still thinks [Loation] is text and it is trying to compare it to a number. I st assumed the step above meant that [Location] was now a number, but maybe you still have wrap it with some kind of VALUES or TEXT function?
View 9 Replies
View Related
Mar 2, 2007
Hi all,
I have been struggling with the below transact sql user defined function. I want to use a transact sql variable in an "in" statement. I don't get any results and I am not sure if I am receiving an error or not.
Code:
DECLARE @myval varchar(50),@username varchar(50)
DECLARE @rolelist varchar(2000)
SET @rolelist = ''
SET @myval = 'user a,user b'
select @myval = ''''+ replace(@myval,',',''',''') + ''''
print @myval
DECLARE User_Cursor CURSOR FOR
select distinct eusername
from euser
where eusername in (@myval)
OPEN User_Cursor
FETCH NEXT FROM User_Cursor INTO @username
SET @myval = @username
SET @rolelist = @username
WHILE @@FETCH_STATUS = 0
BEGIN
SET @rolelist =+ @rolelist + ',' + @username
FETCH NEXT FROM User_Cursor INTO @username
END
CLOSE User_Cursor
DEALLOCATE User_Cursor
print @myval
print 'rolelist' + @rolelist
GO
I am at a loss any suggestions would be greatly appreciated.
View 4 Replies
View Related
Sep 25, 2015
I've been beating my head against this for a bit and haven't been able to figure this out I want to pull 1 set of values between a date time range if @Report = '1' but if @Report = 2 or 3 I want it to drop 3 of the parameters so it will pull all items. by dropping the where parameters for @BeginRangeDate and @LookOutDate and L.COLineStatus. My report works great if I go in and run Report 1 with the date parameters in the where statement and also works great for Reports 2, 3 if I REM out those 3 items in the Where statement. Here is what I currently have
CASE@Report
WHEN'1'THEN
WHEREL.RequestedShipDate>=@BeginRangeDate
ANDL.RequestedShipDate<=@LookoutDate
ANDDO.ForecastDate>=@ForecastDate
[Code] .....
View 7 Replies
View Related
Jul 20, 2005
I've always been mistified why you can't use a column alias in the group byclause (i.e. you have to re-iterate the entire expression in the group byclause after having already done it once in the select statement). I'mmostly a SQL hobbiest, so it's possible that I am not doing this in the mostefficient manner. Anyone care to comment on this with relation to thefollowing example (is there a way to acheive this without re-stating theentire CASE statement again in the Group By clause?):Select 'Age' =CaseWHEN(SubmittedOn >= DATEADD(dd, - 30, GETDATE())) AND (SubmittedOn <=DATEADD(dd, - 0, GETDATE()))THEN '0-30 Days Old'WHEN(SubmittedOn >= DATEADD(dd, - 60, GETDATE())) AND (SubmittedOn <=DATEADD(dd, - 31, GETDATE())) Then '31-60 Days Old'WHEN(SubmittedOn >= DATEADD(dd, - 90, GETDATE())) AND (SubmittedOn <=DATEADD(dd, - 61, GETDATE())) Then '61-90 Days Old'WHEN(SubmittedOn <= DATEADD(dd, - 91, GETDATE())) THEN '91+ Days Old'ELSE cast(SubmittedOn as varchar(22))end,max(SubmittedOn), COUNT(SCRID) AS NbrSCRsFrom SCRViewWHERE(StatusSort < 90) ANDCustomerID = 8 andUserID = 133group byCaseWHEN(SubmittedOn >= DATEADD(dd, - 30, GETDATE())) AND (SubmittedOn <=DATEADD(dd, - 0, GETDATE()))THEN '0-30 Days Old'WHEN(SubmittedOn >= DATEADD(dd, - 60, GETDATE())) AND (SubmittedOn <=DATEADD(dd, - 31, GETDATE())) Then '31-60 Days Old'WHEN(SubmittedOn >= DATEADD(dd, - 90, GETDATE())) AND (SubmittedOn <=DATEADD(dd, - 61, GETDATE())) Then '61-90 Days Old'WHEN(SubmittedOn <= DATEADD(dd, - 91, GETDATE())) THEN '91+ Days Old'ELSE cast(SubmittedOn as varchar(22))endOrder by max(submittedon) descThanks,Chad
View 4 Replies
View Related
Sep 17, 2015
I have a stored procedure that runs (SQL Server 2012 (SP1) Standard Ed) daily and I never had any problem with this stored procedure. However, there is MERGE statement on the stored procedure and I see an error saying that the MERGE statement failed..Here are the stored procedure and error message:
-- FlushQueue
CREATE PROCEDURE [dbo].[FlushQueue] (@RowCount as int = 10000)
AS
BEGIN
SET NOCOUNT ON;
SET XACT_ABORT ON;
[code]....
The MERGE statement attempted to UPDATE or DELETE the same row more than once. This happens when a target row matches more than one source row. A MERGE statement cannot UPDATE/DELETE the same row of the target table multiple times. Refine the ON clause to ensure a target row matches at most one source row, or use the GROUP BY clause to group the source rows. [SQLSTATE 42000] (Error 8672). The step failed.
Table definition:---CREATE TABLE [dbo].[ImportDefinitions]
(
[NodeName] [varchar](20) NOT NULL,
[ProcedureName] [varchar](100) NOT NULL,
[FilePrefix] [varchar](20) NOT NULL,
[ImportDelay] [int] NOT NULL CONSTRAINT [DF_ImportDefinitions_ImportDelay] DEFAULT ((0)),
[code]...
View 13 Replies
View Related
