I have different codes and I want to specify different date of birth range based on selected code in the parameters.
DECLARE @CODE VARCHAR(5) = 'FXE'
SELECT * FROM TABLE
WHERE CODE = 'FXE' and
AND DATE_OF_BIRTH
BETWEENDATEADD(month,-15,GETDATE())
AND DATEADD(year,-1,dateadd(YEAR,-0,cast(GETDATE()asdate))))
How I can do for one code but I cant get my way around bringing another code 'WHY' which has a different date of birth range. Basically I want a user to be able to change a code in the parameter and display results based on the parameter selected.
We were asked to create an SQL function to return a unit price based on various criteria. The function works fine except for the tiered pricing (use of BillingPriceTable) calculation. What we need to do is break up the total quantity passed to the function and return the total of prices found. In our example, we passed a quantity of 9,721 units and need to return a total price of 231.92 using the table below.
Low Qty    High Qty    Fee       Actual Qty       Price 0                 7500       0.025           7500          187.50 7501           15000       0.020           2221         44.42
Below is the table definition that we have to work with (ugghh).
What we have so far is shown below. The columns that start with bdxx are the "High Qty" values and the columns that start with prxx are the price for that quantity range. So, the current SELECT is shown below and it returns the price based on the entire qty of 9,721 and returns a unit price of 0.020 and should return 0.023857628
The current SELECT is shown below and is returning 0.020 which is the fee for the total rather than calculating the fee twice, once for the 0-7500 and again for the 7501-15000 (actually 7501-9721). Two things came to mind, one was a WHILE loop and the other was possibly a ranking function of some sort.Â
ALTER FUNCTION [dbo].[fn_GetPrice] ( @plincdvarchar(3), @pgrpcodevarchar(4), @pitmcodevarchar(4), @qtydecimal(10,1) = 1, @corpnbrvarchar(9) )
Ehhm,great!! Could you tell me what is going wrong with the stored procedure below? I can't get any results! (the 'ap_dateIn' field in the sql table 'tbl_1' has "dd/mm/yy hh:mms" smalldatetime format)
In SQL 2012.A query that joins 2 table, with order by clause doesn't get sorted and the result set is not ordered. This happens when some of the columns in the where criteria are in a unique index which is the index that is used for the join between the 2 tables, and all the columns in the unique index are in the where criteria.In the query plan there is no component for sort.The work around was to drop the unique index, or change it to a non-unique index. Once this was done, the execution plan was changed to add the sort component (even when the index was changed to non-unique and the join was still using this index).
This seems really simple so I'm suprised I'm having so much trouble. Perhaps I'm just overthinking the whole issue. I'm trying to write a query that will extract a list of Users from a table that have logged in within the last 90 days. Sounds easy huh? I'm still stumped!Here's the basics of the attempted query:SELECT UserNameFROM UsersWHERE (LastLoggedInDate<= DATEPART(dd, GETDATE() - 90))Thanks!
I am facing strange problem in SQL Server Query Analyzer, I am writing following query: Select WorkItemKey,DateCreated,DateDue, DateCompleted from WorkItems Where DateCreated > '28/02/2001'
Query failed & gives following error: Server: Msg 242, Level 16, State 3, Line 1 The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
But if I write same query in this way: Select WorkItemKey,DateCreated,DateDue, DateCompleted from WorkItems Where DateCreated > '2001-02-28' OR Select WorkItemKey,DateCreated,DateDue, DateCompleted from WorkItems Where DateCreated > '28/Feb/2001'
It works fine! Can anybody explain me why it is so???
Ok... Here is what I want to to: I have a number of tables, but this query concerns only two of them: Employee, Disposition, with a one to many relationship on the phone number.. Employee has personal info, and dispostion is a large table that keeps track of transactions. There is a unque_id for every transaction.
I want to pull some information. A date is assciated with each trans action on the disposition table. I want to be able to pull up all the unique employee phone numbers from a disposition table but only the latest date they made a transaction. My result should be only one phone nbr, one transaction number, and the date of the last transaction, per employee phne_nbr. But I can't seem to be able to pull this.
This query gets me the max date called per phne_nbr:
select 'Max'= max(dte_call), phne_nbr into TestTable from Disposition group by phne_nbr
The problem arises when I need to get the unique_id for that transaction, as I need it for other queries...The code below does not work...I get duplicate records and so forth.
select 'Max'= max(dte_call), phne_nbr, unique_id into TestTable from Disposition group by phne_nbr, unique_id
This shouldn't be that hard!! (((I tried a variation usin select distinct with the filed I wanted to be distinct in () otherfield, other field... but the distinct is not limited to the field in (), it gets the distinct record for the entire select ))) I must be missing something simple here. Can anyone help!!!
I am trying to create a SELECT statement that would allow my users to type in a date parameter like 6/25/04. My SELECT statement would then pull all entries for that date. The problem I am running into is that it seems SQL wants the date to be parameterized as between 6/25/04 and 6/25/04 11:59:30 PM. Is there any way around that? Again I would like my users to simply enter 6/25/04 and have all entries pulled. Thanks for any help.
I have the following query that should return the most recent FormNote entry for a work order where the note begins with "KPI". However if someone decides to a more recent note, it selects that one, even if it doesn't begin with "KPI".
I would like it to return the most recent record that ALSO begins with "KPI". How can I correct this?
Select wh.worknumber, wh.date_created, wh.itemcode, wn.TextEntry as [Notes] from worksorderhdr wh left join
(select ID, WorksOrder,[CreationDate], TextEntry from ( select ROW_NUMBER()over(partition by worksorder order by [CreationDate] desc) OID,* from FormNotes )orders where orders.OID=1 ) wn on wn.WorksOrder = wh.worknumber where TextEntry like 'KPI%'
Sample results below, see line 5 - this record should not have been selected as there is a record beginning with "KPI" for that work order, but it is dated before this one.
worknumber date_created itemcode Notes -------------------- ----------------------- -------------------- ----------------------------------------------------------------------------------- HU-DN-004385 2014-07-21 16:15:00 4261 KPI Hyd oil leak repaired HU-DN-004707 2014-08-06 11:39:00 8005 KPI Valve replaced on day 2. HU-DN-004889 2014-08-19 15:44:00 9275A KPI Repaired in 2 days - m/c working HU-DN-004923 2014-08-22 14:23:00 4261 KPI New tracks fitted HU-DN-005162 2014-09-12 15:04:00 9360A Mechlock key delivered to site - m/c working HU-DN-005170 2014-09-15 12:07:00 2130A KPI 28.10.14 Metlock fitted
I am using BETWEEN '02/01/2007' AND '2/01/2006' in the criteria of a VIEW and have tried <= '02/01/2007' AND >='2/01/2006' but both are not filtering the dates correctly. Is there another way? What am I missing?
I have a scenario where i need to get the starting and ending date time based on the crieteria. The criteria is I always have my start date as NS or GS in the data column and my end date as GX so i need NS or GS to be my strart date based on ts Ascending and my end date as GX to be displayed in the same columns .
Create Table Test (Tsq INT IDENTITY (1,1), Data Varchar (150), ts datetime, Tpkt_type int) insert into test values ('GS,000020,000021,000022,000023','2013-11-13 09:47:35.963','2')
I need to sum these amounts running from July to the month prior to whatever the current month is. So if it was August, it would only be
Code:
SELECT (JUL_CURR_CREDITS + JUL_CURR_DEBITS) as CURR_AMT
Is there a cleaner (shorter) way to iterate through the twelve months than either writing the query 12 times in an IF statement, or 12 CASE statements? This is only part of a query that joins several tables (not shown).
Any suggestions on the best way to write this would be valued.
SELECT * FROM TableA A JOIN TableB B ON A.PrimaryKeyID = B.ForeignKeyID WHERE B.SomeParamColumn = @SomeParam
SELECT * FROM TableA A JOIN TableB B ON A.PrimaryKeyID = B.ForeignKeyID AND B.SomeParamColumn = @SomeParam
Both of these queries return the same result set, but the first query filters the results in the WHERE clause whereas the the second query filters the results in the JOIN criteria. Once upon a time a DBA told me that I should always use the syntax of the first query (WHERE clause). Is there any truth to this, and if so, why?
I have a query that performs a comparison between 2 different databases and returns the results of the comparison. It returns 2 columns. The 1st column is the value of the object being compared, and the 2nd column is a number representing any discrepancies.What I would like to do is use the results from this 1st query in the where clause of another separate query so that this 2nd query will only run for any primary values from the 1st query where a secondary value in the 1st query is not equal to zero.I was thinking of using an "IN" function in the 2nd query to pull data from the 1st column in the 1st query where the 2nd column in the 1st query != 0, but I'm having trouble ironing out the correct syntax, and conceptualizing this optimally.
While I would prefer to only return values from the 1st query where the comparison value != 0 in order to have a concise list to work with, I am having difficulty in that the comparison value is a mathematical calculation of 2 different tables in 2 different databases, and so far I've been forced to include it in the select criteria because the where clause does not accept it.Also, I am not a DBA by trade. I am a system administrator writing SQL code for reporting data from an application I support.
So I have to build dynamic T-SQL because of a date parameter that will be provided. The Date Parameter will be provided in SSRS in normal MM/DD/CCYY format. So how do I then convert that date to my Oracle format
I have a table here.  I want  find a way of getting the latest date, when the code is the same.  If the Declined date is null.  Then I still want the latest date.  E.g. ID 3. Â
If the declined date is filled in. Â Then I want to get the row, when the Datein column value is greater then the declined date only.
I tried grouping it by max date, but  i got an error message when trying this out.  Against the code Â
WHERE MAX(Datein) > Declined
An aggregate may not appear in the WHERE clause unless it is in a subquery contained in a HAVING clause or a select list, and the column being aggregated is an outer reference. Â What do I need to do to get both my outputs working?Â
i have written a sql function which returns only number of working days (excludes holidays and Weekends)  between given StartDate  and EndDate.           USE [XXX] GO /****** Object:  UserDefinedFunction [dbo].[CalculateNumberOFWorkDays]   Script Date: 10/28/2015 10:20:25 AM ******/ SET ANSI_NULLS ON GO
[code]...
I need  a function or stored procedure which will return the date which is 15 working days (should exclude holidays and Weekends) prior to the given future Date? the future date should be passed as a parameter to this function or stored procedure to return the date.  Example scenario:  If i give date as  12/01/2015, my function or stored procedure should return the date which is 15 working days (should exclude holidays and Weekends) prior to the given date i.e 12/01/2015...In my application i have a table  tblMasHolidayList where all the 2015 year holidays dates and info are stored.
So my data column [EODPosting].[MatchDate] is defined as a DATE column. I am trying to SELECT from my table where [EODPosting].[MatchDate] is today's date.
Is this not working because GETDATE() is like a timestamp format? How can I get this to work to return those rows where [EODPosting].[MatchDate] is equal to today's date?
My requirement is to get the latest start date after a gap in a month for each id and if there is no gap for that particular id minimum date for that id should be taken….Given below the scenario
ID Â Â Â Â Â StartDate 1 Â Â Â Â Â Â 2014-01-01 1 Â Â Â Â Â Â 2014-02-01 1 Â Â Â Â Â Â 2014-05-01-------After Gap Restarted 1 Â Â Â Â Â Â 2014-06-01 1 Â Â Â Â Â Â 2014-09-01---------After last gap restarted 1 Â Â Â Â Â Â 2014-10-01 1 Â Â Â Â Â Â 2014-11-01 2 Â Â Â Â Â Â 2014-01-01 2 Â Â Â Â Â 2014-02-01 2 Â Â Â Â Â Â 2014-03-01 2 Â Â Â Â Â Â 2014-04-01 2 Â Â Â Â Â Â 2014-05-01 2 Â Â Â Â Â Â 2014-06-01 2 Â Â Â Â Â Â 2014-07-01
For Id 1 the start date after the latest gap is  2014-10-01 and for id=2 there is no gap so i need the minimum date  2014-01-01
My Expected Output id       Startdate 1        2014-10-01 2        2014-01-01
how to write a query to get current date or end of month date if we pass year and month as input
Eg: if today date is 2015-09-29 if we pass year =2015 and month=09 then we have to get 2015-09-29 if we pass year =2015 and month=08 then we have to get 2015-08-31(for previous months we have to get EOMonth date & for current month we have to get current date).
I have a the following date variables that's being set around the current date. how to adjust it to work around a date variable @Date instead of the current date?  Lets the @Date = 2015-06-30 then the it would adjust the variable below accordingly. I'm assuming the getdate()) needs to be replaced with @Date but I can't seem to get it to work.
Declare @EndOfLMPriorYear Date = DateAdd(yyyy,-1,EOMONTH(Dateadd(Month,Datediff(Month,0,getdate())-1,0))) Declare @EndOfPriorMonth Date = EOMONTH(Dateadd(Month,Datediff(Month,0,getdate())-2,0)) DECLARE @EndOfLastMonth Date = EOMONTH(Dateadd(Month,Datediff(Month,0,getdate())-1,0))
Basically, the sample raw data is a result from my last cte process which consolidate all the records. I want to find the closest date in PO ended using Receipt_date column but my problem, for this ESN R9000000000019761824, i wanted to get the latest or the last transaction date.
please see below DDL and sample data.
--this is the result from my last cte process Create table #sample (ESN nvarchar(35),ESN2 nvarchar(35), Receipt_Date datetime,PO_ENDED datetime)
insert into #sample(ESN,ESN2,Receipt_Date,PO_ENDED)values('990002036924452','990002036924452','2015-01-07 17:39:44.660','2014-01-09 04:13:29.000')
I require outputting the date difference between two date's if it is greater than 7(DateDiff(day, DateAdd(day, t.[Started], Nxt.started), (t.[started])) > 7).I get incorrect syntax on my operator.What is the correct code?
print @@version print 'arithmetic with datetime' go begin try declare @datetime datetime = getdate()
[Code] ....
... I get this:
Microsoft SQL Server 2008 R2 (SP2) - 10.50.4042.0 (X64)Â Mar 26 2015 21:18:04Â Copyright (c) Microsoft Corporation Express Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
arithmetic with datetime @datetime = Sep 22 2015 Â 1:39PM arithmetic with date Msg 206, Level 16, State 2, Line 3 Operand type clash: date is incompatible with int
Why the inconsistency? Datetime is lenient in this regard - I can even do set @datetime += 0.5 (although the meaning is less intuitive).
drop table #temp create table #temp (id int, dat datetime) insert into #temp values(1,'2015-03-01') insert into #temp values (2,'2015-02-01') insert into #temp values (2,'2015-01-01') insert into #temp values (3,'2015-01-01') insert into #temp values (3,'2015-03-01') insert into #temp values (3,'2014-12-01') insert into #temp values (2,'2014-12-01') insert into #temp values (1,'2014-12-01') select * from #temp
The result i am expecting is  2014-12-01. I need to get the max(dat) for data available for all ids.In the sample set, only for 2014-12-01, there is a row for id 1,2,3. I need to get that date as result.Â
