I am in assumption that we cannot do NULL value comparison in where clause directly (results will not be proper) we have to use ISNULL. Is my understanding correct? Is using ISNULL efficient when we have to this operation for large volume?
View 5 RepliesI write a query to get some data as the following. but i need when a user check specified condition a query parameter change to specified condition :
create proc proc_ReservationDetails
(
@status nvarchar(50) = null
)
as
begin
select reservationId, reservationStatus, reservationDesc
[Code] .....
I am having table like below,
Period Pointvaluemonth area
NULLNULLNULLApril tn
NULLNULLNULLMaytn
NULLNULLNULLJunetn
NULLNULLNULLJulytn
NULLNULLNULLAugusttn
201109 100 10Septembertn
[Code] ....
Then i want to copy september value for october and november and Jan value for feb & mar like next null values should get replaced with previous not null value ...
My desired output is ,
Expected Output is…..
Period Pointvaluemonth area
NULLNULLNULLApril tn
NULLNULLNULLMay tn
NULLNULLNULLJune tn
NULLNULLNULLJuly tn
NULLNULLNULLAugust tn
201109 100 10September tn
[Code] ....
How to replace this Case When
SELECT CASE WHEN Col_1 IS NULL THEN -1 ELSE Col_2 END AS C
FROM MyTable
I have a stored procedure into which a bit type of parameter called '@activated' is being passed. This stored procedure gets all the users matching the condition :
Activated = isnull(@activated, -1)
In users table, one of the columns is 'Activated' of bit type.
The strange thing happening here is that if @activated is null, then the above condition is true for all rows in users table, even though we know that the column Activation is either 1 or 0 only and never -1.Can someone explain why this strange thing is happening?
I have a field called PPH and this field type float. so, this field could be null, 0.0, or values. I am using case statement:
[PPH] = case when h.HoursFloat = 0 then 0 else
round(s.Pledges / h.HoursFloat,2) end,
I am trying to add where if h.HourFloat is null then 0 but, it does not work. I have tried different ways such as
[PPH] = CASE isnull (h.HoursFloat,0)
when 0 then 0 else ....
How to add another condition to check on null then 0.
create table target
(Taid int, studenid int, std int,div int,year int ,ActivityId int)
insert into target values(1,1,1,2015,1),
(1,1,1,2015,2),(1,1,1,2015,3),(1,1,2,2015,1)
,(1,1,2,2015,4) ,(1,1,2,2015,3);
create table activity(ActivityId int,Activity nvarchar)
insert into activity values (1,'sport')
,(2,'swim')
,(3,'read')
,(4,'dace');
I want to edit(update,delete,insert) target table activity from front end for that I took grid view and that grid all activity come of single student studenid(unique key for each student) that you see design below like this
that activity present in target table that come as check in check and that activity not select student from activity activity table that come unchecked
I want to update above information means unchecked alredy check data should delete and new check data add , already check data update
I have use merge statement but problem is that at single time only one row execute that is check because data come from data gridview.
I have an order with the time 08/03/2015 7:30 08/03/2015 10:30 ..I have availability with the time 08/03/2015 07:00:00 to 08/03/2015 19:30:00...Here the availability falls for 3 hours only..My requirement is that For order if availability< 4hours i don't want to show employee.How to apply the condition.
View 7 Replies View RelatedI have a table called names (firstname, lastname, number) then i have a DECLARED variable called @displaynum...If @displaynum id true my select query should select the number column. if the variable is false , only the first two columns are selected.
e.g @displaynum = true
@displaynum = false
Firstname | Lastname | number Firstname | Lastnam
blah | blah | 12345
blah | blah
i am not sure if this is possible as a case still selects the column but just changes the values.
How can I update only one row doing an update query?
For example:
update from table1
set category = 'C'
where country = 'Brazil'
One want to update only one row with country = 'brazil'
I have table with filed
EmpProject -Table
Empno, Name, Project NO, cost center
I need to restrict the results by project No by user input. In case if user did not provide any value for the projectNO, then need to fetch all rows.
Select empno, name, projecno, cost_center from empproject where projectno=nvl(:pno, :deptno)
I have a question about SQL Server.
Table patient:
create table patient (pn int,code int,date date,doctorcode int)
insert into patient (pn,code,date,doctorcode)
values
(1,10,'2015-02-19','100),
(1,10,'2015-02-19','101),
(1,10,'2015-02-19','102),
[Code] ...
Table Patientref:
create table patientref
(pn int,code int, sdate date,edate date,status int)
insert into patientref(pn,code,sdate,edate,status)
values
(1,10,'2015-02-13','2015-02-19',1),
(1,10,'2015-02-19','2015-03-24',2),
[Code] ...
Here we need consider patient dates that fall between sdate and edate of the patientrefs table, and then we need to consider the highest status values in order (for example, the highest values in order - 2 is first highest, 4 is second highest, 3 is third highest, and 1 is fourth highest value)
If the date falls between multiple different sdate and edate with the same status values, then we need to consider the latest sdate value and from that entire record we need to extract that value.
Examples: patient
pn | code | date | doctorcode
2 | 10 |2015-02-12 | 101
2 | 10 |2015-02-13 | 102
2 | 10 |2015-02-14 | 103
Table : Patientref:
pn | code | sdate | edate | Status
2 | 10 |2015-02-08 | 2015-02-19 | 4
2 | 10 |2015-02-09 | 2015-02-19 | 2
2 | 10 |2015-02-10 | 2015-02-19 | 2
2 | 10 |2015-02-11 | 2015-02-18 | 1
Here, pn=2 values have dates which fall between sdate and edate of patientref table. Then we give highest values status is 2, and status 2 values have two records, then we go for max sdate(latest sdate). Then this pn=2 latest sdates is 2015-02-10 and we need to retrieve the corresponding edate and status values.
pn = 4donot have sdate and edate and status values dut not fall conditon
Based on this, the desired output is below:
pn | code | date | doctorcode | sdate |edate |status
1 | 10 |2015-02-19 | 100 |2015-02-19 |2015-03-24 | 2
1 | 10 |2015-02-19 | 101 |2015-02-19 |2015-03-24 | 2
1 | 10 |2015-02-19 | 102 |2015-02-19 |2015-03-24 | 2
2 | 10 |2015-02-12 | 101 |2015-02-10 |2015-02-19 | 2
[Code] ...
I tried it like this:
select p.pn,p.code,p.[date],p.doctorcode,pr.sdate,pr.edate,pr.[status] from patient p
outer apply (select top 1 pr.pn,pr.code,pr.sdate,pr.edate,pr.[status] from patientref pr
where pr.pn=p.pn and pr.code=p.code and p.date between pr.sdate and pr.edate
order by case when pr.status=2
then 1 when pr.status=4 then 2
when pr.status=3 then 3
when pr.status=1 then 4 end ,pr.sdate
)pr
but this query not given expected result.here when dos not fall between sdate and edate that records not given in the above query. I required that records also.if not fall b/w condition then we need retrive that records empty values for that records.
I have an existing store proc with insert and update statements, I want to add a condition at the top of the proc with conditions like;
declare @dayofweek int
set datefirst 1
select @dayofweek = datepart(dw,getdate())
--select @dayofweek
if @dayofweek = 1
[Code] ...
If the condition meets with either of the above 2 conditions, than have to run the actual store proc.
My actual Storeproc in which I need to incorp the above conditions is:
CREATE PROCEDURE [dbo].[Load_Product]
@FileDate date = NULL
AS
BEGIN
DECLARE @EventText varchar(500),
@Rows int = 0,
@RowsTotal int = 0,
[Code] .....
I am using SQL Server 2008.Each stock item will have default 4 document type (1, 5, 6, 7) and each will have 3 zone's (1, 2, 3) to qualify. Each zone will be updated to 1 for that document type if the item successfully pass through it. If all zone are NULL means no transaction. How to retrieve only the failed rows which means not all zone are 1 or NULL.In the image GJ-00064 has one row failed. So how to get the count of failed rows for each item
Expected result:
Uniid <-> Stockcode <-> FailedRows
1670 <-> GJ-00064 <-> 1
I am using SQL 2005. I have some data from an old application that did not follow the rules for normalization. The table is for Invoices, and the table allows for 13 purchase items per record. So in each row of my table I have a non-unique integer field itemID, itemID1, itemID2 ... itemID12. For each itemID I also have "lbs_total" and "line_total" (which is price * lbs_total) - so itemID, lbs_total, line_total ... itemID1, lbs_total1, line_total1 ... etc. It's a mess, I know.Each row has a unique Customer Number ("cno") and an Invoice Date ("inv_date"). My proc needs to allow for params for the item number, and a start date and end date for BETWEEN on the inv_date.I also need to get the aggregate for the lbs_total and the line_total.
View 15 Replies View Relatedbelow is my original query
select Value = count(*) from dbo.test
I have 20 rows in dbo.test so i will get 20 as my output, now i need to write a case statement here such that when count(*) = 0 then it should display text filed 'NO Data' else it should display the count.
I want to calculate year to month data for month wise . Ihave start range and end range table like below
Start range and end range table
Start dateEnd date
01-04-201401-11-2014
01-04-201401-12-2014
01-04-201401-01-2015
01-04-201401-02-2015
[Code] ....
Then I want to pass this value one by one in below table for get value month wise
Main table
Branchamountperiod
Branch110201103
Branch22201104
Branch33201401
Branch44201402
Branch58201403
Branch610201404
[Code] ....
The below query is for november month: (Apr to Nov)
select * from maintable
where period between '01-04-2014' and '01-11-2014'
then for December month : (Apr to Dec)
So I want to pass second row
select * from maintable
where period between '01-04-2014' and '01-12-2014'
.....
....
select * from maintable
where period between '01-04-2015' and '01-12-2015'
Like wise I want to get month wise data of YTM data.
My expected output is
201411
201412
201501
201502
201503
201504
201505
[Code] ....
I need to write a query on a table..
table defination .. table Client_Master
file_id int identity(1,1) primary key
, client_id int
,LOAN_SANCTION_DATE datetime
,is_reject bit
has Data ..
FILE_ID CLIENT_ID
LOAN_SANCTION_DATE IS_REJECT
21139 22784
2014-02-03 00:00:00.000 0
21141 22784
2014-02-03 00:00:00.000 NULL
20869 22784
2014-02-03 00:00:00.000 1
20870 22784
2014-02-03 00:00:00.000 0
21571 22784
2014-02-03 00:00:00.000 1
66056 22784
2014-02-03 00:00:00.000 1
Above has 6 files entries for client id 22784 and LOAN_SANCTION_DATE 2014-02-03 out of which 3 are rejected ..
Now , i want to write a query to select those distinct client_id , LOAN_SANCTION_DATE from Client_Master where all files has been rejected ..
means by grouping client ID and LOAN_SANCTION_DATE all the files are rejected ..
I have wrote as below .. got the result but not satisfy with the query
SELECT DISTINCT CLIENT_ID,LOAN_SANCTION_DATE,COUNT(FILE_ID) AS No_Of_Files
,COUNT(DISTINCT CASE WHEN IS_REJECT=1 THEN FILE_ID END )AS No_Of_Rejected
FROM dbo.FILE_MASTER
GROUP BY CLIENT_ID ,LOAN_SANCTION_DATE
HAVING
COUNT(FILE_ID)=COUNT(DISTINCT CASE WHEN IS_REJECT=1 THEN FILE_ID END )
I've two audit tables, AUDIT_ORDERS and AUDIT_ORDER_LINES.
The AUDIT_ORDERS has these columns: AUDIT_ID, ORDER_ID, AUDIT_DATE and other ones.
The AUDIT_ORDER_LINES has these columns: AUDIT_ID, ORDER_ID, ORDER_LINE_ID, AUDIT_DATE and other ones.
I need to join these two tables in order to select for each order line row the first order having the related audit date lower than or equal to the audit date of the related order line.
I don't want to use the TOP 1 clause or a subquery. I think to complete a such statement:
SELECT OL.Order_Line_ID, O.Order_ID, OL.Audit_Date, O.Audit_Date
FROM AUDIT_ORDER_LINES as OL INNER JOIN AUDIT_ORDERS as O
on OL.Order_ID = O.Order_ID and O.Audit_Date <= OL.Audit_Date ...
I'd like to get the first row of the Audit_Orders with audit_date <= of the audit_date of the Audit_Order_Lines table by using the join clause.
I have a query where i would calculate the counts of three Servers
declare @Managed float
declare @Active float
DECLARE @Values varchar(1000)
SET @Values = 'WE,EE,CO'
select @Managed = count(Name0) from v_R_System where Operating_System_Name_and0 like '%Workstation%'
[Code] ...
Here i need output like below
Workgroup Managed Active
'WE' 255 ,400
'EE' 300 ,450
'CO' 155, 600
So how to use these three values in the where condition when i use the where clause i have put in condition it will give me the subquery returns more than one value,so how should i use this scenario to accomplish this output?
I have a Stored Procedure, wherein I need to use a while loop. essentially the loop looks like this.
Set @Kount = 1
--TestScript
Select 'TempReqTable', * from @TempReq
WHILE Exists(Select * from @TempReq WHERE TempID = @Kount)
BEGIN
--Do stuff with values from table
Set @Kount += 1
END
The test script confirms that there is only one row in the @TempReq table. However the loop never stops running and @Kount keeps being incremented and incremented until I manually stop the execution of the SP.
Is there some rule that I am not aware of that does not allow the use of an Exists statement in the condition of a While loop?
How do I get the below scenario:
EmpID DepID
12 2
17 3
17 2
13 3
Every Employee should be in Department 2 and 3 (as example EmpID = 17 has DepID 2 and 3 from above table). But when any of the employees either exists only in any one department (as EmpID = 12 has only DepID = 2), then a new row should be added to the table for that employee with that missing DepID.
Desired Output:
EmpID DepID
12 2
17 3
17 2
13 3
12 3
13 2
I have customers named Alex (Cid=1), Bob (Cid=2), and Carrie (Cid=3) in a table customer.
Cid
First_Name
1
Alex
2
Bob
3
Carrie
I have products name Gin (Pid=1), Scotch (Pid=2) and Vodka (Pid=3) in a table products.
Pid
Product_Name
1
Gin
2
Scotch
3
Vodka
And I have a table that holds purchase called Customer_Purchases that contain the following records:
Cid
Pid
1
1
1
2
2
1
2
3
3
2
I would like to make a marketing list for all customers that purchased Gin or Scotch but exclude customers that purchased Vodka. The result I am looking for would return only 2 records: Cid’s 1 (Alex) and 3 (Carrie) but not 2 (because Bob bought Vodka).
I know how to make a SELECT DISTINCT statement but as soon as I include Pid=2 This clearly doesn’t work :
SELECT DISTINCT Pid, Cid
FROM
Customer_Purchases
WHERE (Cid = 1) OR
(Cid = 3) OR
(Cid <> 2)
I have a query that returns the data about test cases. Each test case can have multiple bugs associated to it. I would like a query that only returns the test cases that have all their associated bugs status = closed.For instance here is a sample of my data
TestCaseID TestCaseDescription BugID BugStatus
1 TestCase1 1 Closed
2 TestCase1 2 Open
3 TestCase2 11 Closed
4 TestCase2 12 Closed
5 TestCase2 13 Closed
How can I limit this to only return TestCase2 data since all of that test case's bugs have a status of closed.
I am using stored procedure to load gridview but problem is that i am not getting all rows from first table[ Subject] on applying conditions on second table[ Faculty_Subject table] ,as you can see below if i apply condition :-
Faculty_Subject.Class_Id=@Class_Id
Then i don't get all subjects from subject table, how this can be achieved.
Sql Code:-
GO
ALTER Proc [dbo].[SP_Get_Subjects_Faculty_Details]
@Class_Id int
AS BEGIN
[code] ....
For example..
select * from mytable where MyNum = 7
If this brings back more than 1 row, I want to display a message that says,
Print 'There is more than one row returned'
Else (If only 1 row returned), I don't want to print anything.
Can I do this? Thx!
Dear friends,
I'm having a problem... maybe it's very simple, but with soo many work, right now I can't think well...
I need to filter rows in a dataflow...
I created a condition spli to that... maybe there is a better solution...
And the condition is: Datex != NULL(DT_DATE)
(Some DATE != NULL)
[Eliminar Datex NULL [17090]] Error: The expression "Datex != NULL(DT_DATE)" on "output "Case 1" (17123)" evaluated to NULL, but the "component "Eliminar Datex NULL" (17090)" requires a Boolean results. Modify the error row disposition on the output to treat this result as False (Ignore Failure) or to redirect this row to the error output (Redirect Row). The expression results must be Boolean for a Conditional Split. A NULL expression result is an error.
What is wrong??
Regards,
Pedro
I am trying to write an visibility function to have message shown based on two different IIF conditions:
If behavior is to Add a customer ( if message =NAME ALREADY EXISTS, return " NAME ALREADY EXISTS", otherwize return " NAME CREATED")If behavior is to Delete a customer (( if message =NAME DOES NOT EXIST, return "NAME DOES NOT EXIST", otherwize return "NAME SUCCESSFULLY DELETED")
I tried the following which doesn't work:
=IIF((UCase(First(Fields!Message.Value, "DataSetName")) = "NAME ALREADY EXISTS"), "WARNING: NAME ALREADY EXIST", "NAME CREATED"),
IIF((UCase(First(Fields!Message.Value, "DataSetName")) = " NAME DOES NOT EXIST"), "WARNING: NAME DOES NOT EXIST", " NAME DELETED")
I am trying to delete a row of data that is all nulls. Help in BOL was a little help but it is not working.
View 2 Replies View RelatedI create a stored procedure like such:
"create procedure tmptable_query (@lname varchar(20)) as select * from #temp_table where lname like ISNULL(@lname+'%',lname)"
Unfortunately, it only returns exact matches, as if it were written as "where lname = ISNULL(@lname, lname)"
However, if I query from a static table the code works correctly.Any ideas on what could be wrong?
Thank you.
for the query i created i need zeros where ever the filed is blank. i have used count(acc) for selecting the count . can any one help me out with sample query. Thanks in advance
View 5 Replies View RelatedI have two tables, tblMTO and tblIMPORT_MTO. If I import an entire MTOinto the import table I want to create a delta from it (i.e. leave onlythe changed items). I have a view (simplified)SELECT dbo.tblIMPORT_MTO.ImportID, dbo.tblIMPORT_MTO.MTONo,dbo.tblIMPORT_MTO.Rev AS New_Rev, dbo.tblMTO.Rev AS Old_RevFROM dbo.tblIMPORT_MTO LEFT OUTER JOINdbo.tblMTO ON dbo.tblIMPORT_MTO.MTONo = dbo.tblMTO.MTONoNow to get all rows where old_rev = new_rev I also want all rows whereboth are null, is the best method to put ISNULL() in the view or toselect from the view using ISNULL in the criteria, e.g.select * from view1 where ISNULL(Old_Rev,0)=ISNULL(new_rev,0)or in the viewCREATE VIEW view1 asSELECT dbo.tblIMPORT_MTO.ImportID, dbo.tblIMPORT_MTO.MTONo,ISNULL(dbo.tblIMPORT_MTO.Rev,0) AS New_Rev, ISNULL(dbo.tblMTO.Rev ASOld_Rev,0)FROM dbo.tblIMPORT_MTO LEFT OUTER JOINdbo.tblMTO ON dbo.tblIMPORT_MTO.MTONo = dbo.tblMTO.MTONo;select * from view1 where Old_Rev=new_rev;
View 2 Replies View Relateddoes sql server mobile 2005 support the isnull function? I'm getting an error when I try to use it and I don't know if it is becuase of using the isnull function or not, but when I run the same query on Sql Server 2005 it works fine.
View 5 Replies View Related