Transact SQL :: Verify Inserted Values From One Table (in CSV File) With Another Table (in Database)
Aug 4, 2015
I am looking for a Sql query to verify the inserted values from one table(in CSV file) with another table(in sql database)
For example: I have below Values column that is present in once CSV file, after my data migration the values get stored in Results table under Message column.
I need to very whether values(1X,1Y) are inserted in Message record "successfully inserted value 1X"
Values (CSV)
1X
1Y
Results Table(SQL)
CreatedDate Message
2015-08-04 08:45:29.203 successfully inserted value 1X
2015-08-04 08:44:29.103 TEst pass
2015-08-04 08:43:29.103 successfully inserted value 1X
2015-08-04 08:42:29.203 test point
2015-08-04 08:35:29.203 successfully inserted value 1Y
2015-08-04 08:30:29.203 Test Pass
2015-08-04 08:28:29.203 successfully inserted value 1Y
If all values are inserted:
Output:
All values from values table are inserted successfully
Total count of values inserted: 2
If only few values are inserted, example only 1X from Values table is inserted in Message
Example:
Results Table CreatedDate Message
2015-08-04 08:45:29.203 successfully inserted value 1X
2015-08-04 08:44:29.103 TEst pass
2015-08-04 08:43:29.103 successfully inserted value 1X
2015-08-04 08:42:29.203 test point
Output:
All values from values are not inserted successfully in result table.
Total count of values inserted: 1
Missing Values not inserted in results table are: 1Y
I am trying to create a check command that ensures only A'B','c','D','E','F','G and s1, s2 can be inserted in the table, is this even applicable? Heres my code:
I am sure someone must have run into this before. I have a couple of tables with a parent child relationship.
I created a trigger on the insert of the parent but don't want it to fire until both the parent and child have been inserted into.
However sometimes the child may not get inserted in to at all. In other words it is a 1 to 0 or more relationship.
I created the whole insert into the parent and the child and wrapped it all up in a transaction hoping that the trigger would not fire until the transaction actually completed.
However such is not the case and it fires when the parent is inserted into but nothing is inserted into the child yet even though that is part of the transaction.
Is it possible to postpone trigger fire until after both parent and child table values have been inserted?
Doe anyone know if any limitations with SQL Server Express may be causing this?
I have an application (a web service hosted on my local PC) that parses an InfoPath form and submits the data to a database (SQL Server Express). The problem I'm have is that new records are not always inserted into the database when I submit. There is an autoincrement ID field and I observed that every other record was successfully inserted (a day ago) and today I observed that the records were inserted intermittently. However, when I run the same application on a laptop, the records are inserted each time.
I posted the associated code on the Data Access forum but it occurred to me that it may be because of the nature of SQL Server Express.Any suggestions would be much appreciated. Thanks!
I am working on sql integrating with Hybris. Most of you are not aware of hybris as it was a new technology.
In hybris we will create some classes and in those classes we will insert some tables. These tables will be automatically inserted into the sql server. No need to manually insert them the hybris structure will insert it. So my doubt is, how can we find out whether all the records have been inserted into sql database or not how we can check that.
Is there any way?? We have those classes in wich we can see which tables are there. Or else from the data model itself we can see what are the tables avilable or shud be inserted into sql thru hybris.
Can we check by giving all the table names in a single query?? or is there any other way to find out. If we can check by giving all the table names in single query how we need to give it.
Hi SQL fans,I realized that I often encounter the same situation in a relationdatabase context, where I really don't know what to do. Here is anexample, where I have 2 tables as follow:__________________________________________ | PortfolioTitle|| Portfolio |+----------------------------------------++-----------------------------+ | tfolio_id (int)|| folio_id (int) |<<-PK----FK--| tfolio_idfolio (int)|| folio_name (varchar) | | tfolio_idtitle (int)|--FK----PK->>[ Titles]+-----------------------------+ | tfolio_weight(decimal(6,5)) |+-----------------------------------------+Note that I also have a "Titles" tables (hence the tfolio_idtitlelink).My problem is : When I update a portfolio, I must update all theassociated titles in it. That means that titles can be either removedfrom the portfolio (a folio does not support the title anymore), addedto it (a new title is supported by the folio) or simply updated (atitle stays in the portfolio, but has its weight changed)For example, if the portfolio #2 would contain :[ PortfolioTitle ]id | idFolio | idTitre | poids1 2 1 102 2 2 203 2 3 30and I must update the PortfolioTitle based on these values :idFolio | idTitre | poids2 2 202 3 352 4 40then I should1 ) remove the title #1 from the folio by deleting its entry in thePortfolioTitle table2 ) update the title #2 (weight from 30 to 35)3 ) add the title #4 to the folioFor now, the only way I've found to do this is delete all the entriesof the related folio (e.g.: DELETE TitrePortefeuille WHERE idFolio =2), and then insert new values for each entry based on the new givenvalues.Is there a way to better manage this by detecting which value has to beinserted/updated/deleted?And this applies to many situation :(If you need other examples, I can give you.thanks a lot!ibiza
I have a table (can't change the schema of it since it is part of an off the shelf app ) that has columns for individuals which I need to extract several pieces of information, essentially Phone, Email Address, etc. See U1 - U6
What is a better way to return this information rather than multiple joins?
I have a table called USERS, some of its records are marked as hiddenRcord, I want to load those records in a custom page in my asp.net webpage with paging enabled, each page contains 10 records.
I use the statement "SELECT Top 10 tableID,userName FROM USERS WHERE (hiddenRecord=0 AND tableID>@tableID)"
The pagination has 5 links (First,2,3,4,Last), I can of course put the last tableID in link number 2, but I don't know how to do it for the links (3,4,Last).
I am trying to update one table when records are inserted in another table.
I have added the following trigger to the table “ProdTr” and every time a record is added I want to update the field “Qty3” in the table “ActInf” with a value from the inserted record.
My problem appears to be that I am unable to fill the variables with values, and I cannot understand why it isn’t working, my code is:
ALTER trigger [dbo].[antall_liter] on [dbo].[ProdTr] for insert as begin declare @liter as decimal(28,6)
I would like to compare values in the same table and get the single record with different values in the multiple columns.For table tab1, ID is my key column. If type1 is active (A) then i need to update X else blank on Code1 column and if type2 is active (A) then i need to update X else blank on code2 column. Both type1 and type2 comes from same table for same ID..Below is the example to understand my scenario clearly....
declare @tab1 table (ID varchar(20), dt date, status varchar(1), type varchar(10)) insert into @tab1 values ('55A', '2015-07-30', 'A', 'type1') insert into @tab1 values ('55A', '2015-07-30', 'C', 'type2') insert into @tab1 values ('55B', '2015-07-30', 'C', 'type1') insert into @tab1 values ('55B', '2015-07-30', 'A', 'type2')
I have 3 variables that gets comma separated values. My requirement is to get them into a temporary table with 3 columns and each column should have single value. E.g. if
Declare @SID varchar(max),@CID VARCHAR(MAX),@KID VARCHAR(MAX) Set @SID='1,2,3,4' Set @CID='6,7,8,9' Set @KID='A,BB,CCC,DDDD'
--Now my requirement is to get them in a temp table with 3 column and different rows as per comma separated values in variables.
Now my requirement is to get them in a temp table with 3 columns and different rows (as per number of comma separated values in variables) E.g.
I need write a query for removing duplicates, for Example in my table I have columns
A_ID name id 1 sam 10 2 sam 10 3 sam 10 4 sam 10 5 ccc 15 6 ccc 15 7 ccc 15 8 fff 20 9 fff 20 10 fff 20
So now I have duplicates values in id column so now I need to take only one value of each and delete the remaining. I need to take first id value 10,15,20 so only 3 rows should be there in my table.
I want to insert a row for a Global user in Table 'A' whenever ADO.Net code inserts a Local user row into same table. I recommended using a trigger to implement this functionality, but the DBA was against it, saying that stored proecedures should be used, since triggers are unreliable and slow down the system by placing unecessary locks on the table. Is this true OR the DBA is saying something wrong? My thinking is that Microsoft will never include triggers if they are unreliable and the DBA is just wanting to offload the extra DBA task of triggers to the programmer so that a stored procedure is getting called, so he has less headache on his hands.Thanks
I want to pass the 'inserted' table from a trigger into an SP, I think I need to do this by dumping inserted table into a temporary table and passing the temp table. However, I need to do this for many tables, and don't want to list all the column names for each table/trigger (maintenance nightmare).
Can I dump the 'inserted' table to a temp table WITHOUT specifying the column names?
However the issue is with [1],[2],[3] columns. Those are the number of days of the month. If today is the 3rd day of the month, we only need to show 3 days. So the final table has column [1],[2],[3] and @AccountType and @Total .
We want to run this query everyday to get the moth to date values.If we run this tomorrow, it will have 4 date columns [1], [2],[3],[4] and @AccountType and @Total .
I have 2 identical tables one contains current settings, the other contains all historical settings.I could create a union view to display the current values from table A and all historical values from table B, butthat would also require a Variable to hold the tblid for both select statements.
Q. Can this be done with one joined or conditional select statement?
DECLARE @tblid int = 501 SELECT 1,2,3,4,'CurrentSetting' FROM TableA ta WHERE tblid = @tblid UNION SELECT 1,2,3,4,'PreviosSetting' FROM Tableb tb WHERE tblid = @tblid
I've to write a function to return a comma delimited values from a table columns
If a table has Tab1 ( Col1,Col2,Col3).
E.g. as below ( the columnName content I want to use as columns for my pivot table
CREATE FUNCTION [RPT].[GetListOfCol] ( @vCat NVARCHAR(4000) ) RETURNS @PList AS BEGIN SELECT @PList += N', [' + [ColumnName] +']' FROM [ETL].[TableDef] WHERE [IsActive] = 1 AND [Category] = @vCat RETURN; END;
I want out put to be as below, I am getting this output from the select query independently by declaring @Plist variable and passing @vcat value, now I want it to be returned from a function when called from a select query output ,Colum1,column2,....
Table2 has three columns (i.e. Date, Count and Rule Type). Column “Rule Type “has a default value which is “XYZ”..Now I want to insert Data from Table1 to Table2. I am using following query:-
Column name or number of supplied values does not match table definition.I am using SQL 2012. I understand Table1 has 2 Columns but Table2 has 3 Columns. Is there anyway, I can move data from source table to Destination table where Destination Table has more number of Columns?
Any easy way for a batch file or automated process to read from one db and table and what ever entry is missing out of another database + table it writes those missing entries to.
This is a simple table in one db that is filled with usernames, I want to see if there are missing usernames in another db and table and write those entries.
db1.usr_table.usr_name = jdoenew If jdoenew is missing in the 2nd db I will need to write entries like: db1.usr_table.usr_name = jdoenew db1.usr_table.password = tmppassword db1.usr_table.active = 1
I have created a table Table with name as Varchar and id as int. Now i have started inserting the rows like, insert into Table values ('arun',20).Yes i have inserted a row in the table. Now i have got the values " arun's ", 50. insert into Table values('arun's',20) My sqlserver is giving me an error instead of inserting the row. How will you solve this problem?
I have tables and a function as representated by the code below. The names for objects here are just for representation and not the actual names of objects. Table RDTEST may have one or multiple values for RD for each PID. So the function GIVERD will return one or multiple values of RD for each value of PID passed to it.
When I run the following query, I get the required result except the rows for CID 500 for which PID is NULL in table T1. I want the rows for CID 500 as well with PID values as NULL.
SELECT A.CID, A.ANI, A.PID, B.RD FROM T1 AS A CROSS APPLY GIVERD(A.PID) B
) ================================================= In my VB 2005 Express, I created a project "KimmelCallNWspWithAdoNet" that had the following code: --Form_Kimmel.vb-- Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlTypes
Public Class Form_Kimmel
Public Sub InsertCustomer()
Dim connectionString As String = "Integrated Security-SSPI;Persist Security Info=False;" + _
End Class ==============================================
I executed the Form_Kimmel.vb and I got no errors. But I did not get the new values insterted in the table "Custermers" of Northwind database. Please help and tell me what I did wrong and how to correct this problem.
I need to write a stored procedure to verify that a table exists andalso that the user executing the stored procedure has access to thespecified table.Any user can call this publicly available procedure and pass a databasename, an owner name and a table name as parameters. The procedurereturns success if the table exists and the user has access to it, orfails if he doesn't. Here's a simplified version of what I have, butI'm wondering if there's a better way. Thanks.create procedure dumb asbegindeclare @myError int,@mytable varchar(128),@myquery varchar(128)select @mytable = '[Northwind].[dbo].[sysobjects2]'select @myquery = 'DECLARE @x int SELECT @x = count(1) from ' +@mytable + ' where 1 = 2'exec (@myquery)select @myError = @@ERRORif @myError != 0BEGINRAISERROR ('ERROR: The specified table %s cannot be accessed.', 10, 1,@mytable)RETURN 1endendgo
