I have the following query and want the results within my query although I want to be able to get the SUM of my COUNT results. So basically I want the SUM of [Document Count] within my query/
DECLARE @Date date;
SET @date = '02/05/2015'
SELECT CONVERT(VARCHAR,CONVERT(Date, @Date, 103),101) AS [Date Scanned], (SELECT COUNT(*) FROM QUEUE WHERE date_scanned = @Date) AS [Total Scanned],
COUNT(dbc_state) AS [Document Count],
CASE
WHEN dbc_state = 1 AND ON_HOLD = '1' THEN 'On Hold'
I want to avoid iterating through a table row by row and programmatically incrementing a counter,/I have define a view called Q2 with the following fields of interest:
Trial varchar(25) BI int Track int CAT int
What I would like to do is partition by Trial, BI, and Track, and count the number of times CAT changes value. In Access, I would just iterate through a recordset inside a function, but I would like to see if there is a set based solution.Adding Sample Data and Output.
I'm working on a data analysis involving a table with a large number of records (close to 2 million). I'm using only three of the columns in the table and basically am grouping results based on different criteria. The three columns are PWSID, Installation and AccountType. I have to Provide the PWSID column with a count of the total number of installations per PWSID, also a count of AccountTypes per PWSID. I have the following query, but the numbers aren't adding up and I'm not sure why. I'm falling short in the total count by around 60k records.
DECLARE @PN_INC INT, @POSITION_DESC VARCHAR(15) SELECT @PN_INC= MAX(PositionNumberInc) FROM dbo.tblPosition WHERE LTRIM(RTRIM(UPPER(PositionDescription)))=LTRIM(RTRIM(UPPER(@POSITION_DESC))); SELECT @PN_INC is returning null when there is no record in the table;
1. how can I make it return 0 when @PN_INC is null else it should pick the MAX(PositionNumberInc) value
2. I have written the below query to return 0 when @PN_INC is null but I need query to select the MAX(PositionNumberInc) value when @PN_INC is not null
SELECT @PN_INC= coalesce(MAX(PositionNumberInc), 0) FROM dbo.tblPosition WHERE LTRIM(RTRIM(UPPER(PositionDescription)))=LTRIM(RTRIM(UPPER(@POSITION_DESC)));
Which means, I want to count for each transaction, the latest entry based on date. And there can be many countries like this. And I need to count both entries for ABC & XYZ.Normal count will give me duplicate entries.
How can I display 0 when using COUNT and GROUP BY?I'm using SELECT CASE in my query. I was trying to use COALESCE but no result, COUNT result = 1. (there should be 0).
COALESCE((COUNT(DISTINCT (CAST((CASE WHEN CurrStat = @Stat AND LogDate = @LogDate THEN Enumber ELSE 0 END) AS int)))), 0) AS InTrack,
I have a table with a couple hundred billion records (sql server 2005). When I do a select count(*) from tblx -- it takes this side of forever. Is it possible to count partitions and then add them up to make it faster?
How I could improve the performance for count(*) of this huge table. Note: if the partition idea sounds viable -- what would that look like?
My table is test and I have an ID and DateTest columns
I would like to count the weeks with more then one record.
So far I got this and return the weeks with 1 record per week. How can I count the weeks with more then one record
select sum(c) from ( select c = count( id) over (partition by id, datepart(week, DateTest)) from test where id = '1' and DateTest >= '7-7-2015' ) a where c = 1
I have a table which table has :Identity Column (Identity), Schema name and Table_Name.
So I would like to write a cursor For each Table Count(*) from Table--@Cnt Int , Schemaname and Tablename need to store another table.
Implement a USP, using a cursor that scan the table, generate select count statement from configuration table and fire the select count statement and record the result of the query in the log table :
how can I write a cursor and Import Those results into to Another table.
I have a really basic question. The following SQL query works for me:
Select EnterUserID, Enterdate from tblCsEventReminders where EnterDate >= Convert(datetime, '2015-04-01')
I am essentially trying to write a query to count the number of user logins after a certain date, so I need to count 'EnterUserID' but I am having problems getting the count() function to work.
I am trying to find a count on group of our memberid`s who were active within a year since 2010 till today for particular memberships in my table I have memberid int effectivedate datetime termdate datetime Membershiptype varchar(10) ='GOLD','Silver' and 'Platinum'. I haven't used sql in a long time..
I have conducted a thorough search in the forums and cannot quite find my answer. I have a date field called open_date. If the open_date is more than 30 days old, I need to count it. I have started with the following code:
SELECT 'Older_Than_30Days' = CASE WHEN open.date >= 30 THEN '1' ELSE '0" END
I have a question regarding the total count of the table rows
Select count (name) from test. Lets say I have got 200 count. And Select count (lastname) from test1.I have got 200.And this counts I should store it in "There are nn name items awaiting your attention and nn pending lastname's awaiting your approval".
I am trying to get count of records by month wise when they select year .It was showing the out put correctly but its showing months arer in numbers,but I want to display Jan,Feb ...
SELECT DISTINCT Standard, COUNT(Standard) AS Total,month(ReportDate) Month FROM CPTable where year(ReportDate) = '2015' GROUP BY Standard, Standard , month(ReportDate)
I am using SQL 2012. I have a GROUP BY and I want to select two other fields from my table at the same time: One column that is a string (account_code) and one that I need to perform a count on (customer_number). I know the code COUNT(DISTINCT customer_number) works for getting that. I need to select both of those fields on top of what I have. I have the following:
DECLARE @Providers TABLE (ID INT IDENTITY(1,1), Provider_Name VARCHAR(20), Uniq_Id VARCHAR(10), Total_Spent MONEY, Total_Earned MONEY) INSERT INTO @Providers (Provider_Name, Uniq_Id,Total_Spent, Total_Earned)
I am using SQL Server 2008.Each stock item will have default 4 document type (1, 5, 6, 7) and each will have 3 zone's (1, 2, 3) to qualify. Each zone will be updated to 1 for that document type if the item successfully pass through it. If all zone are NULL means no transaction. How to retrieve only the failed rows which means not all zone are 1 or NULL.In the image GJ-00064 has one row failed. So how to get the count of failed rows for each item
who has workflows created and ordered by CreateTimestamp . i need to count the number of workflows from top to point where there is either a success or failure workflow that occurs at the latest .
1.ban 137108351 has success workflow and prior to that workflow it has 2 workflows (exclude success and failure) 2.ban 104917284 has success workflow as latest (it still has failure but not considered because it is occurred earlier to success ) and prior to that workflow it has 2 workflows (exclude success and failure) 3.ban 107500674 has failure workflow and prior to that workflow it has 0 workflows (exclude success and failure)
below provided code for sample data as well
GO /****** Object: Table [Temp].[deleteit] Script Date: 7/31/2015 3:04:55 PM ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE TABLE [Temp].[deleteit]( [ban] [nvarchar](256) NULL,
I have a table called Employee which have 6 columns. This table are having 1000 records. Now I want to know the distinct value count of all these 6 columns as well as normal count. like this:
ColumnName DistinctCount NormalCount Id 1000 1000 Name 1000 1000 Phone 600 600 PINCode 200 1000 City 400 1000 Gender 2 1000
I have a stored procedure which will send an email notification everyday the count of names and count of logins at night. And this sends like a link so the users can directly click on the link(s) and see who all logged in. This works perfectly fine.
Now my requirement is that if there is no count for either name or logins it should send just as text and not as link.
Select count (name) from dbo.test=0 just plain 'text total count of names 0' Select count (logins) from dbo.test1=0 just plain text 'total count of logins 0'
I want to find out count of same UserID used within 7 days for that month.
For example, in below scenario, UserID 458's 1st TTo is 8/26/2015 and it used again on 8/28/2015 which is less than 7 so result should be 1. (DateDiff between 1st TTo and 2nd Tfrom should be less than 7) This is for month of Aug.
I need to create a stored procedure for total count of the user's. If User from front end invites other user to use my tool, that user will be stored into a table name called "test",lets say it will be stored as"Invited 1 User(s)" or if he invites 2 users it will store into table as "Invited 2 User(s)."
But now we have changed the concept to get the ISID (name of the user) and now when ever the user invites from the front end, the user who have invited should stored in two tables "test" and " test1" table .
After we get the data into test and test1 table i need the total count of a particular user from both tables test and test1.
if i invite a user , the name of the user is getting stored in both test and test1 tables.Now i want to get the count of a user from both tables which should be 1,but its showing 2.
Reason: Why i am considering the count from 2 tables is because before we were not tracking the usernames and we were storing the count in single test table.,but now we are tracking user names and storing them in both tables(test and test1).
Here is my sample code:
I need to sum it up to get the total user's from both the table but I should get 1 instead of 2
SELECT (select distinct COUNT(*) from dbo.test where New_Values like '%invited%' and Created_By= 'sam' + (select distinct count (*) from dbo.test1 where invited_by ='sam'
I have a table called Employees which has lots of columns but I only want to count some specific columns of this table.
i.e. EmployeeID: 001
week1: 40 week2: 24 week3: 24 week4: 39
This employee (001) has two weeks below 32. How do I use the COUNT statement to calculate that within these four weeks(columns), how many weeks(columns) have the value below 32?
updating the # of Payer from below query to match with the # of rows for each payer record. See the Current and desired results below. The query is currently counting the # of rows for all payers together and updating 3 as # of payers. I need it to count # of rows for each payer like shown inDesired result below. It should be showing 1 for first payer and 2 for 2nd & 3rd based on # of times each payer is repeated..
SELECT b.FILING_IND, b.PYR_CD, b. PAYER_ID, b. PAYER_NAME,a.CLAIM_ICN, (Select Count(*) From MMITCGTD.MMIT_CLAIM a, MMITCGTD.MMIT_TPL b , MMITCGTD.MMIT_ATTACHMENT_LINK c where a.CLAIM_ICN_NU = c.CLAIM_ICN and b.TPL_TS = c.TPL_TS and a.CLAIM_TYPE_CD = 'X'
Required output: parameters are Subject column values
ClassId ClassName TotalStudents SubjectIds
1 ESL 1 20, 40, 50 1 ESL 1 30
When one student takes multiple subjects then count student only once, so in the above data 12 is one student id takes multiple subjects so counted only once. TotalStudents value is 1
I did write below query:
Declare @subjectids string set @subjectids = '20,30,40,50'
-- will split @subjectids and store in temp table
select classname, classid, Count(Distinct StudentId) from mytable where SubjectsIds in @subjectIds group by ClassId, ClassName, SubjectId,
1 2015 ba1 137 HL EL Eco 2 2015 ba1 138 EL SL HS 3 2015 ba1 139 SL EL His
From this table i use to admit a student and select their choice of group simultaneously all the subjects associated with GROUP is save on another table.
Here is the TABLE 2 Structure and sample data:
table 2 (NAME - tblstudetail)
id studentID session course sub1 sub2 sub3
1 15120001 2015 ba1 EL SL HS 2 15120002 2015 ba1 HL EL Eco 3 15120003 2015 ba1 SL EL His 4 15120004 2015 ba1 HL EL Eco
AND so no..........................
Now i just want to COUNT the Number of Groups Filled in tblStudateil.
I have 3 tables: Suppliers, Documents and Verification, each document may have multiple verification where I need to get the last verification according to verification date. So I just need a "Select top 1 result from Documents, Verification where doc_iddoc=ver_iddoc and result='True' order by ver_date desc" so far I get the result of the last verification, but here's the problem:
I need to get a row with the count of documents for each supplier, I mean:
Supplier Name Docs NegativeVerification Acme Co 10 1
that is I would need to loop for each supplier and each document and get the last verification, if one of any of documents have negative verification then add it to negative results. Is it possible to achieve this with a query or do I have to do it through stored procedure?
I've been able to get this select query to work, but I'm not sure how to modify it to turn it into a DELETE query:
USE QSCTestENG select p.[testid], COUNT(c.[testid]) FROM [dbo].[tblTestHeader] p left outer join [dbo].[tblTestMeasurements] c ON p.[testid]=c.[testid] where p.[model] = 'XPPowerCLC125US12' group by p.[testid] having COUNT(c.[testid]) <>48;
I have a CTE returning a recordset which contains a column SRC. SRC is a number which I use later to get counts and sums for the records in a distinct list.
declare@startdate date = '2014-04-01' declare@enddate date = '2014-05-01' ; with SM as ( SELECT --ROW_NUMBER() OVER (PARTITION BY u.SRC ORDER BY u.SRC) As Row, u.SRC,
[Code] ....
-- If Referral start date is between our requested dates
ref.Referral_Start_Date between @startdate and @enddate
OR
-- Include referrals which started before our requested date, but are still active during our date range.
(ref.Referral_Start_Date < @startdate and (ref.Referral_End_Date > @startdate OR ref.Referral_End_Date IS NULL )) ) INNER JOIN c_sdt s on s.Service_Delivery_Type_Id = u.Service_Delivery_Type_Id AND s.Service_Delivery_Unit_Id = 200 ) SELECT count(distinct (case SRC when 91 then client_number else 0 end)) As Eligable_91,
