I didn't find whats problem with this code. Actually I try to create a select statement with with cte select statement. In cte clause my output ok but when I try to receive that output from write another select statement then its show error.
Msg 102, Level 15, State 1, Line 276
Incorrect syntax near ';'.
Msg 102, Level 15, State 1, Line 315
Incorrect syntax near ')'.
Msg 156, Level 15, State 1, Line 351
Incorrect syntax near the keyword 'as'.
I am writing a query and have the bulk of it already written.Â
I am looking at a table that contains customer orders. There is a column named Customer_Order.Status Available values for this column is R, F, H, and C.
I'd like for my query to return all lines that have the value R, F, H.
My where clause is written like thisÂ
WHERE CUSTOMER_ORDER.SITE_ID = 'XXX' AND CUSTOMER_ORDER.STATUS = ('R','H','F')
I am currently having this problem with gridview and detailview. When I drag either onto the page and set my select statement to pick from one table and then update that data through the gridview (lets say), the update works perfectly. My problem is that the table I am pulling data from is mainly foreign keys. So in order to hide the number values of the foreign keys, I select the string value columns from the tables that contain the primary keys. I then use INNER JOIN in my SELECT so that I only get the data that pertains to the user I am looking to list and edit. I run the "test query" and everything I need shows up as I want it. I then go back to the gridview and change the fields which are foreign keys to templates. When I edit the templates I bind the field that contains the string value of the given foreign key to the template. This works great, because now the user will see string representation instead of the ID numbers that coinside with the string value. So I run my webpage and everything show up as I want it to, all the data is correct and I get no errors. I then click edit (as I have checked the "enable editing" box) and the gridview changes to edit mode. I make my changes and then select "update." When the page refreshes, and the gridview returns, the data is not updated and the original data is shown. I am sorry for so much typing, but I want to be as clear as possible with what I am doing. The only thing I can see being the issue is that when I setup my SELECT and FROM to contain fields from multiple tables, the UPDATE then does not work. When I remove all of my JOIN's and go back to foreign keys and one table the update works again. Below is what I have for my SQL statements:------------------------------------------------------------------------------------------------------------------------------------- SELECT:SELECT People.FirstName, People.LastName, People.FullName, People.PropertyID, People.InviteTypeID, People.RSVP, People.Wheelchair, Property.[House/Day Hab], InviteType.InviteTypeName FROM (InviteType INNER JOIN (Property INNER JOIN People ON Property.PropertyID = People.PropertyID) ON InviteType.InviteTypeID = People.InviteTypeID) WHERE (People.PersonID = ?)UPDATE:UPDATE [People] SET [FirstName] = ?, [LastName] = ?, [FullName] = ?, [PropertyID] = ?, [InviteTypeID] = ?, [RSVP] = ?, [Wheelchair] = ? WHERE [PersonID] = ? ---------------------------------------------------------------------------------------------------------------------------------------The only fields I want to update are in [People]. My WHERE is based on a control that I use to select a person from a drop down list. If I run the test query for the update while setting up my data source the query will update the record in the database. It is when I try to make the update from the gridview that the data is not changed. If anything is not clear please let me know and I will clarify as much as I can. This is my first project using ASP and working with databases so I am completely learning as I go. I took some database courses in college but I have never interacted with them with a web based front end. Any help will be greatly appreciated.Thank you in advance for any time, help, and/or advice you can give.Brian
If it possible to have an if statement match multiple results, as to not have to use the OR multiple times.
Example: I want to say, if Description equals red or blue or green or yellow or orange or black or white or pink, without having to use OR and OR and OR. Description can match 10 different values.
I have database with three tables Accounts, Results, and ClosedOrders. All are connected through AccountID PK/FK.
I got a wonderful select statement that gives me the latest Results for each Account.
WITH cte AS ( SELECT Accounts.AccountID, Accounts.AccountName, Results.ResultTime AS LastUpdated,
[Code] ....
I've been struggling to extend this with two more columns from the ClosedOrders table. How to add columns to the this view? Basically what I need is this:
SELECT SUM([Lots]) AS Longs FROM [DEV].[dbo].[ClosedOrders] WHERE OrderTypeID = 0;
SELECT SUM([Lots]) AS Shorts FROM [DEV].[dbo].[ClosedOrders] WHERE OrderTypeID = 1;
But it has to "join" the CTE somehow so that I get the correct answer for each Account row.
How I can get the following Desired SELECT STATEMENT with the increment of Max(serial_no)+1. Date will be in quotation in desired SELECT STATEMENT. All data is same. Just changing the serial_no which will be Max(serial_no)+1.
Create table #seq (serial_no numeric, Scode numeric, Sdate datetime, SErr char(10)) insert into #seq values (1,1002,'10/10/2015','SEDT') insert into #seq values (2,1005,'12/10/2015','PEFT') insert into #seq values (3,1004,'1/1/2015','QEGT') insert into #seq values (4,1008,'1/2/2015','TEWT') insert into #seq values (5,1007,'3/10/2015','REDT')
I have this update statement that works for one record. How do I write it to include multiple records at once. Please see sample below.
update mklopt set  FRMDAT = '12/31/2014' where  JOBCOD = 'PH14789'Â
I also want to include the following instead of running it one at a time
PH17523Â Â Â Â PH17524Â Â Â Â PH17525Â Â Â Â PH17553Â Â Â Â PH17555Â Â Â Â PH17556Â Â Â Â PH17557Â Â Â Â PH17558Â Â Â Â PH17571Â Â Â Â PH17573Â Â Â Â PH17574Â Â Â Â PH17575Â Â Â Â PH17576Â Â Â Â PH17577Â Â Â Â PH1757
I want to select all of the date and weekDay values from tblWagesWeeks for a specific weekID. I also want to show all entries fromtblTimeEntry for the weekID when a record exists. If data does not exist in fromtblTimeEntry I want to display a blank entry but still need weekDay and date from tblWagesWeeks.
I'm using sql 2008 and triying to build a dynamic sql script to split the records 50/50.I know using newid() with order by clause selects randomly but how should I build the select statement to split the data 50/50 so i don't need to run the script manually everytime ?
I have 20 rows in dbo.test so i will get 20 as my output, now i need to write a case statement here such that when count(*) = 0 then it should display text filed 'NO Data' else it should display the count.
I want to add a custom column in a select statement that has a value to true or false based on other criteria.
SELECT [ID], [Name], [Description], [EmpID], [Employed] FROM [Employees]
Now, in the above example there is no [Employed] Column in my table but I want it to show true or false based on whether or not [EmpID] equals a certain value.
Everything about this query works except I'm trying to capture the @companyid (which is a variable) into a column in my table via my select statement.
My error is Invalid column name 'A113', etc. However it is the A113 I'm trying to insert into the first column of the table SAP_GLsummary
-- retrieves a list of gl balances from all companies truncate table sap_glsummary declare @companyID char(6) declare c_company cursor for select INTERID from dbo.GP_Interid open c_company fetch next from c_company into @companyID
I need to perform an update where there are multiple scenarios which determine the value that is entered. Below is a sort've psuedo code of how it needs to be.
Update MyTable SET MyColumn = CASE WHEN MyCol1 = 'Value1' Then NewValue Else WHEN MyCol1 <> 'Value1' And MyCol2 = 'Active' Then 'Value1'
In the scenario where MyCol1 <> Value1 and MyCol2 <> 'Active' then no update would occur and the original value would remain intact.
I'm trying to delete the selected data from a table colum from a select statement.
This is the select statement
SELECTÂ RFC822Â FROMÂ SQLGOLDMINE.DBO.MAILBOX MB WHERE ((MB.CREATEON >= '2014-07-24' AND MB.CREATEON <= '2015-07-24') OR (MB.MAILDATE >= '2014-07-24' AND MB.MAILDATE <= '2015-07-24')) AND (MB.MAILREF LIKE '%auction notification & invitation%')
What the delete statement would look like. I've tried replacing Select with delete from but get a sytax error.
Is there any reason to use the WITH statement rather than putting a SELECT in a JOIN? Does one method perform better or is it just a matter of preference?
I am trying to write a Transact-SQL statement and am having no success. I have a customers table that has some duplicate Customer Numbers in it, however the records do have a unique Reference Number. I am trying select all records that match a list of Customer Numbers but if there are more than 1 matching Customer Number I only want the one with the largest Reference Number.
My BASIC Select Statement is:
SELECT Cust_Ref_No, Customer_No, Customer_Name, Address1, Address2, Suburb, State, Postcode, Phone FROM Customers WHERE Customer_No IN (SELECT Customer_No FROM temp_Customers)
Much to my HORROR I found that what I am trying to do is simple in MS Access using the “First” Function – Such as below:
SELECT First(Cust_Ref_No) AS Cust_Ref_No, Customer_No FROM Customers GROUP BY Customer_No ORDER BY First(Cust_Ref_No), Customer_No;
There appears to be no “First” Function in Transact-SQL. Is someone able to show me how to achieve the same results in Transact-SQL as I can get with MS Access (I’d HATE to think that MS Access has more functionality in querying data than SQL Server in any way at all)?
P.S. I really need to run the select statement as one step rather than splitting it up into parts.
I basically want to select all GRNID's from one table but they have to be between dates in another table.So I want all GRN's between two dates found in the ABSPeriodEndDate table. To find out the start date for the between clause I need to find the MAX Period then minus 1 and the max year. To find the end date of the between clause I want I need to find both the max period and year. But I want the DateStamp column to return the results for the between clause. My query is below:
SELECT tblGRNItem.GRNID FROM tblGRNItem INNER JOIN ABSPeriodEndDates ON tblGRNItem.DateCreated = ABSPeriodEndDates.DateStamp WHERE tblGRNItem.DateCreated BETWEEN (SELECT ABSPeriodEndDates.DateStamp FROM ABSPeriodEndDates WHERE ABSPeriodEndDates.DateStamp = (SELECT
I am trying to apply the logic from the following resource: URL....but cannot get it to work with my logic for some reason.For example, the following query:
;WITH CTE1 AS (SELECT CONVERT(VARCHAR, GETDATE(), 120) AS Col1), CTE2 AS (SELECT CONVERT(VARCHAR, GETDATE(), 111) AS Col2) SELECT CTE1.Col1,CTE2.Col2 FROM CTE1 CROSS JOIN CTE2 GO
Produces the following output:
Col1 | Col2 2014-05-08 10:55:54 | 2014/05/08
But, as soon as I try to do something else like:
;WITH CTE1 AS (SELECT COUNT(login) FROM userinfo AS Col1), CTE2 AS (SELECT COUNT(login) FROM userinfo AS Col2) SELECT CTE1.Col1,CTE2.Col2 FROM CTE1 CROSS JOIN CTE2 GO
I receive the following errors:
Msg 8155, Level 16, State 2, Line 1 No column name was specified for column 1 of 'CTE1'. Msg 8155, Level 16, State 2, Line 2 No column name was specified for column 1 of 'CTE2'.
Are there limitations when trying to use multiple CTE in a single query?
I am trying to insert a carriage return in the select statement after the web link where I had highlighted code in bold. When I insert a record into the table, I receive the email with the message body is in single line.I need the result to look like this in the message body:
ALTER TRIGGER [dbo].[SendNotification] ON [dbo].[TicketsHashtags] FOR INSERT AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from
I have scenario where i have to pick one particular value from where condition. Here is the example:A store can have different types i-e A or B , A and B or either A or B.
Store   Type   Sales 11      A     1000 23    A    1980 23    B    50 5     B    560
I want to filter the store in "where clause" Â where
1)- if the store has type A and  B, then assign only A 2)- if the store has  type A associated with it then assign A 3)- if the store has type B associated with it, then assign B.
Select Store, sum(sales), Type from table1 where (TYPE]= Â (case when [TYPE] in ('A','B') then 'A' when [TYPE]='A' then 'A' else 'B'end)) GROUP BY [store], [TYPE]
The above statement is not working for when store has only Type B associated with it.
SELECT DATEDIFF(n , LAG(CAST(Date AS DATETIME) + CAST(Time AS DATETIME), 1) OVER ( ORDER BY Date, Time ), Â Â Â Â Â Â CAST(Date AS DATETIME) + CAST(Time AS DATETIME)) Â Â Â FROM [DataGapTest]
Gives the right output:
NULL 1 1 3548 0
However, when I put the statement in a function, I get only zeros as the output. It's as if the lag and current value are always the same (but they are not of course).
CREATE FUNCTION dbo.GetTimeInterval(@DATE date, @TIME time) RETURNS INT AS  BEGIN  DECLARE @timeInterval INT   SELECT @timeInterval = DATEDIFF(n , LAG(CAST(@Date AS DATETIME) + CAST(@Time AS DATETIME), 1) OVER ( ORDER BY Date, Time ),       CAST(@Date AS DATETIME) + CAST(@Time AS DATETIME))    FROM dbo.[DataGapTest]   RETURN @timeInterval  END
I can't seem to place the "option (recompile)" in any valid position so that the following procedure executes without a syntax error .
USE [PO] GO /****** Object: StoredProcedure [dbo].[npSSUserLoad] Script Date: 4/18/2015 3:57:38 PM ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON
[Code] ...
-- Generated code - DO NOT MODIFY
-- From Object Schema: 'C:XXXXXX.NetPOPOModel\_ObjectSchema
-- To regenerate this procedure use the 'Open With' option on file _ObjectSchema and select POCodeGen.exe
Declare @SqlCmd nvarchar(max) Declare @ParamDefinitions nvarchar(1024) Set @ParamDefinitions = N'@UserId int,NTUser varchar(30), @XmlResult XML OUTPUT' Set @SqlCmd = N'Set @XmlResult = ( Select [UserId] [a], [UserName] [b],
I tend to learn from example and am used to powershell. If for instance in powershell I wanted to get-something and store it in a variable I could, then use it again in the same code. In this example of a table order items where there are order_num, quantity and item_prices how could I declare ordertotal as a variable then instead of repeating it again at "having sum", instead use the variable in its place?
Any example of such a use of a variable that still lets me select the order_num, ordertotal and group them etc? I hope to simply replace in the "having section" the agg function with "ordertotal" which bombs out.
select order_num, sum(quantity*item_price) as ordertotal from orderitems group by order_num having sum(quantity*item_price) >=50 order by ordertotal;
select CurrencyCode,TransactionCode,TransactionAmount,COUNT(TransactionCode) as [No. Of Trans] from TransactionDetails where CAST(CurrentTime as date)=CAST(GETDATE()as date) group by TransactionCode, CurrencyCode,TransactionAmount order by CurrencyCode
As per this query I got the result like this
CurrencyCode TransactionCode TransactionAmount No.OfTrans AEDÂ Â Â BNTÂ Â Â 1Â Â Â 1 AEDÂ Â Â BNTÂ Â Â 12Â Â Â 1 AEDÂ Â Â SCNÂ Â Â 1Â Â Â 1 AEDÂ Â Â SNTÂ Â Â 1Â Â Â 3
[Code] ....
But I wish to grt result as
CurrencyCode TransactionCode TransactionAmount No.OfTrans AEDÂ Â Â BNTÂ Â 13Â Â Â 2 AEDÂ Â Â SCNÂ Â Â 1Â Â Â 1 AEDÂ Â Â SNTÂ Â Â 11Â Â Â 7 AFNÂ Â Â BPCÂ Â Â 8Â Â Â 6
[Code] ....
I also tried this
select CurrencyCode,TransactionCode,TransactionAmount,COUNT(TransactionCode) as [No. Of Trans] from TransactionDetails where CAST(CurrentTime as date)=CAST(GETDATE()as date) group by TransactionCode order by CurrencyCode
But of course this codes gives an error, but how can I get my desired result??
Below. I have also pasted the current result of this query and the desired result.Â
Query can be updated to get the desired result as given below?
Query: Select c.OTH_PAYER_ID, c.PAID_DATE, f.GROUP_CODE, f.REASON_CODE, f.ADJUSTMENT_AMOUNT From MMIT_CLAIM_ITEM b, mmit_tpl c , mmit_attachment_link d, MMIT_TPL_GROUP_RSN_ADJ f where b.CLAIM_ICN_NU = d.CLAIM_ICN and b.CLAIM_ITEM_LINE_NU = d.CLAIM_LINE_NUM and c.TPL_TS = d.TPL_TS and f.TPL_TS = c.TPL_TS and b.CLAIM_ICN_NU = '123456788444'
Current Result which I am getting with this query
OTH_PAYER_ID PAID_DATE GROUP_CODE REASON_CODE ADJUSTMENT_AMOUNT 5501 07/13/2015 CO 11 23.87 5501 07/13/2015 PR 12 3.76 5501 07/13/2015 OT 32 33.45 2032 07/14/2015 CO 12 23.87 2032 07/14/2015 OT 14 43.01
Desired/Expected Result for which I need updated query
There is a stored-procedure that it has multiple select statements as returned result set. How can I use SqlCommand.ExecuteReader to get all result set?
What if the multiple select statements is " FOR XML", how can I set all xml using ExecuteXmlReader?
I tried to use ExecuteReader or ExecuteXmlReader, but seems that I can only get back the result set of the first select statement, all others are messed up.
stored procedure example: NorthWind database:
SET QUOTED_IDENTIFIER ON GO SET ANSI_NULLS ON GO
Create PROCEDURE dbo.getShippersAndEmployeesXML AS
select * from Shippers for xml auto, elements select * from Employees for xml auto, elements
RETURN @@ERROR
GO SET QUOTED_IDENTIFIER OFF GO SET ANSI_NULLS ON GO
first of all is it possible? if so, what am i doing wrong with this
INSERT into TB2
(
ClientCode, EngagementCode, EngagementDescription
)
SELECT (SELECT dbo.tarCustomer.CustID FROM dbo.tPA00175 INNER JOIN dbo.tarCustomer ON dbo.tPA00175.CustKey = dbo.tarCustomer.CustKey INNER JOIN dbo.tPA00007 ON dbo.tPA00175.intJobKey = dbo.tPA00007.intJobKey),
NULL,
SELECT (SELECT dbo.tPA00175.chrJobNumber FROM dbo.tPA00175 INNER JOIN dbo.tarCustomer ON dbo.tPA00175.CustKey = dbo.tarCustomer.CustKey INNER JOIN dbo.tPA00007 ON dbo.tPA00175.intJobKey = dbo.tPA00007.intJobKey)
the first select statement for works fine, but the second one and all after i get a syntax error near 'select'.
this is just a shortened version of the statement. how would i run select statements for a table to be inserted into with different column names. also with items that are hard coded like the 'null'. thanks
and i have also another table which is namelist that is linked to the masterlist table.. after i search for the record andrew in the table namelist..i updated andrew as 25 and sex is female..now i want reset andrew's record, same to the records that andrew has in the table masterlist..
This is more of a basic SQL question rather than anything specific for T-SQL, but I assume someone here can help me...
I have a problem with properly combining a lot of AND and ORs in a SELECT statement in a stored procedure in order to get the desired results. The problem is that I want to have all results that fullfill all of the supplied conditions: InstitutionCode, CollectionCode, ScientificName, Locality (unless they are null, hence 'coalesce') and the Parentid, that can be in one of eight columns.
SELECT * FROM QueryView WHERE InstitutionCode = COALESCE(@museum, InstitutionCode) AND CollectionCode = COALESCE(@collection, CollectionCode) AND ScientificName LIKE '%' + @binomen + '%' AND Locality LIKE '%' + @locality + '%' AND ParentID1 = COALESCE(@taxparent, ParentID3) OR ParentID2 = COALESCE(@taxparent, ParentID2) OR ParentID3 = COALESCE(@taxparent, ParentID3) OR ParentID4 = COALESCE(@taxparent, ParentID4) OR ParentID5 = COALESCE(@taxparent, ParentID5) OR ParentID6 = COALESCE(@taxparent, ParentID6) OR ParentID7 = COALESCE(@taxparent, ParentID7) OR ParentID8 = COALESCE(@taxparent, ParentID8)
The current construction, however, gives me all results that fullfill either on of the four conditions, or the parentid in one of the columns. putting parentheses around parentid part gives me zero query results. I understand that the ORs should be restricted to the parentids and not the rest, but putting parentheses around parentid part gives me zero query results.
Has anyone got a good tip to help me resolve this puzzle?
I have a user login scenario where I would like to make sure that they not only exist in the user table, but also make sure there account is "verified" and "active". I'm trying to return 3 output parameters. UserID, verified, active. Is this possible?
Do I need just a select statement to do this? What is the difference between the output and select statements?
I'm trying to create an interface for filtering profiles from an SQLServer 2005 database using an html form. The form allows filtering based on a minimum level required in between one and four different columns. The first (and only mandatory) column to be filtered on has its name hard-coded into the base query. In trying to get the other three possible criteria to work, I've taken several approaches, all of which failed.The other three potential criteria are selected from a drop down menu on the form and ideally these choices are passed into a query to be used as column names. My first attempt looked like this: query = "SELECT * FROM profiles_tbl WHERE (EngSkill >= @english)" .... if ReqSkill1 <> "" then level1 = Convert.ToInt32(Request.form("minskilllvl1")) query = query & pickclmleft & ReqSkill1 & pickclmright1 cmd.Parameters.Add("@ReqSkill1", SqlDBtype.text) cmd.Parameters("@ReqSkill1").value = ReqSkill1 cmd.Parameters.Add("@level1", SqlDBtype.int) cmd.Parameters("@level1").value = level1 end if above If statement was repeated for 2nd and 3rd optionsSecond approach was to remove all parameters from sections of the query that were appended onto the original statement. This involved lots of strings containing AND clauses with hard-coded column names which were appended on when the corresponding option was selected in the form. Code looked like this: query = "SELECT * FROM profiles_tbl WHERE (EngSkill >= @english)" ASPqry = " AND (ASPlevel >= " try con = new SqlConnection() con.ConnectionString = “**************string was correct****************� cmd = new SqlCommand() cmd.Parameters.Add("@english", SqlDBtype.int) cmd.Parameters("@english").value = english if ReqSkill1 <> "" then if ReqSkill1 = "ASPlevel" then query = query + " AND (ASPlevel >= " level1 = Convert.ToInt32(Request.form("minskilllvl1")) if level1 = 0 then query = query + "0)" end if if level1 = 1 then query = query + "1)" end if if level1 = 2 then query = query + "2)" end if if level1 = 3 then query = query + "3)" end if end if end ifFinally when this too failed, I created four entirely separate queries, detected how many criteria were used, and used the appropriate query, passing necessary skill level in as a parameter. I'll provide code if needed here. Queries were written as strings and then used to set the CommandText property for an SqlCommand variable. I think it's important to note that in all cases the most basic version of the query worked. In the first, if only the first criteria was used the statement executed fine. Same in the second. In the third, whatever query could be assigned first (even though only one could be assigned because of logical structure of if statements) worked and none of the others would. This last case was tested even with completely hard-coded queries that SQL Server 2005 validated as correct and would run. Any help is greatly appreciated. Will post as much code as people want/need, and if I can get any one of these methods working I'll be thrilled. I have no need for all three. A.S. Moser
