Transact SQL :: Calculating Transaction Time
Nov 23, 2015
select TOP 10 rec_id,trans_id,number_id,card_no,message_id,trans_datetimefrom [dbo].[trans_log]
order by trans_datetime desc101, 1,34343, 99999, 200, 2015-11-23 12:27:25.710101,2,34343,99999,210,2015-11-23
12:27:26.710102,3,43434,88888,200,2015-11-23 12:28:26.714102,4,43434,88888,233,2015-11-23 12:28:27.710expected result:34343,99999,datediff(ss,'2015-11-23 12:27:26.710','2015-11-23 12:27:25.710') --difference between row 2 and row 143434,88888,datediff(ss,'2015-11-23 12:28:26.714','2015-11-23 12:28:27.710') --
difference between row 4 and row 3difference between row 6 and row 5...In the above query, I always want to find the difference in transaction date time between second and first row in a moving window.I have the unique id as rec_id to compare the next row with the previous row.
View 3 Replies
ADVERTISEMENT
Jul 13, 2015
We are maintaining 3 Shifts in our database. Problem in maintaining date and time for 3rd Shift. For example, today date is 13th July and third shift timing is 11 PM - 7 AM. Then I have to display the beginning date as 13/07/2015 11 PM and end date as 14/07/2015 7 AM. Please find the data(in seconds) available in database which I need to use for my calculation.
Date(Fcreacion)
Start time in Seconds(Hcreacion)
End time in seconds(Hcerrar)
turno(Shift)
[code]...
View 3 Replies
View Related
Aug 27, 2005
Hello,
I am fairly new to this, but I need to write a query that calculates whether an order made a shipping cutoff based on creation time, and when it actually shipped, based on local customer time. All times in the table below are central time.
Heres where it gets complicated for me. If the order was created after 8:00am local customer time the same day, and shipped prior to 5pm local customer time, it would be considered a pass, or a 1. If an order was created after 8am local customer time, BUT didnt ship until AFTER 5pm local customer time, it would be considered a failure or a 0. And to complicate things even more, if the order is created after 5pm local customer time, the order create time would be treated as it was created at 8am local customer time the following day local customer time, and would need to be shipped prior to 5pm local customer time that day. Would CASE be appropriate for this? Or am I thinking wrong? Any help would really be appreciated!!
Ordernum OrderCreate OrderShipDate TimeZ
67890 5/5/2005 11:575/6/2005 15:33 EST
35789 5/5/2005 13:575/5/2005 14:19 MST
44465 5/5/2005 13:58 5/5/2005 21:58 CST
87654 5/5/2005 18:00 5/7/2005 21:58 PST
View 13 Replies
View Related
Oct 14, 2005
I have a table called Tickets which contains ticket information for a machine. Each machine can have more than one ticket number opened at the same time. The ticket number contains start date/time and end date/time of the ticket. Thereefore the table looks something like this:
Ticket_No (int)
Machine_No (int)
Description (char)
Start_Time (datetime)
End_Time (datetime)
I want to be able to calculate total duration time(in hours) that EACH MACHINE had a ticket open...but here is the tricky part. The total duration time that a machine had ticket open has to encompas any tickets that may fall in the same time period. For example:
If Machine A has a ticket open at 8:30 and the ticket is closed at 10:00. Meanwhile, Machine A had another separate ticket open at 9:30 which was closed at 10:30. In this case, the total duration time for this machine would be from 8:30 to 10:30 for a total of 2 hrs duration time.
Can anyone help me get started in tackling this problem or provide any examples?
View 4 Replies
View Related
Dec 4, 2013
Code:
CREATE TABLE [dbo].[DigiTracker](
[DigitrackID] [int] IDENTITY(1,1) NOT NULL,
[contact_id] [int] NOT NULL,
[Code]....
-- not accurate b/c it returns 0 for all TimePerPageSec
SELECT DATEDIFF(second,min(createDt),max(createDt)) AS TimePerPageSec
FROM DigiTracker
GROUP BY contact_id, ZinePageNumber
time spent (in seconds) between each record
View 9 Replies
View Related
Dec 13, 2007
Hi guys, I am having difficulty calculating the time duration between receiving process to shipping process.
I have a table that consists of: Order#, Processes, Time_In, Time_Out.
Order# can be 1, 2, 3, 4, 5.
While at the same time Order# 1 can go through more than one process, i.e.: Receiving, VisualTest, MechanicalTest, ..., Shipping.
Every Order# does not necessarily goes through all processes, but surely they will go through receiving process and shipping process.
For each process we will have recorded time when the order# comes in and when it finishes with each process.
I need to calculate the length of time from Time_In from Receiving to Time_Out in Shipping.
I.E.:
Order# | Process | Time_In | Time_out
1 | Receiving | 2007-12-1 10:00:00.000 | 2007-12-1 10:10:00.000
1 | Incoming Q.A. | 2007-12-1 10:40:00.000 | 2007-12-1 11:42:00.000
1 | Visual Check | 2007-12-2 08:10:00.000 | 2007-12-2 11:00:00.000
1 | Shipping | 2007-12-2 11:20:00.000 | 2007-12-2 11:52:00.000
2 | xxxxx | xxxxx | xxxxx
2 | xxxxx | xxxxx | xxxxx
2 | xxxxx | xxxxx | xxxxx
Please help.
Thanks in advance.
View 2 Replies
View Related
Jul 20, 2005
Hi,I have a table called Bookings which has two important columns;Booking_Start_Time and Booking_End_Time. These columns are both of typeDATETIME. Given any day how can I calculate how many hours are availablebetween the hours of 09.00 and 17.30 so a user can see at a glance how manyhours they have unbooked on a particular day (i.e. 8.5 hours less the timeof any bookings on that day), can this be done with a queryor do I have to work it out in my code?Thanks for your help
View 2 Replies
View Related
Dec 13, 2007
Hi guys, I am having difficulty calculating the time duration between receiving process to shipping process.
I have a table that consists of: Order#, Processes, Time_In, Time_Out.
Order# can be 1, 2, 3, 4, 5.
While at the same time Order# 1 can go through more than one process, i.e.: Receiving, VisualTest, MechanicalTest, ..., Shipping.
Every Order# does not necessarily goes through all processes, but surely they will go through receiving process and shipping process.
For each process we will have recorded time when the order# comes in and when it finishes with each process.
I need to calculate the length of time from Time_In from Receiving to Time_Out in Shipping.
I.E.:
Order# | Process | Time_In | Time_out
1 | Receiving | 2007-12-1 10:00:00.000 | 2007-12-1 10:10:00.000
1 | Incoming Q.A. | 2007-12-1 10:40:00.000 | 2007-12-1 11:42:00.000
1 | Visual Check | 2007-12-2 08:10:00.000 | 2007-12-2 11:00:00.000
1 | Shipping | 2007-12-2 11:20:00.000 | 2007-12-2 11:52:00.000
2 | xxxxx | xxxxx | xxxxx
2 | xxxxx | xxxxx | xxxxx
2 | xxxxx | xxxxx | xxxxx
Please help.
Thanks in advance.
View 6 Replies
View Related
Dec 9, 2011
I have data in which i need to calculate employees working hours for a day...
name time in_out
manisha 2011-01-01 9:30:00.000am 1
manisha 2011-01-01 10:30:00.000 0
manisha 2011-01-01 10:45:00.000 1
manisha 2011-01-02 1:00:00.000am 0
How can i calculate time in that two dates as 1 is for entry an 0 is for exit..
View 2 Replies
View Related
Jun 6, 2008
Hi all,
Thanks for setting up such a great site and forum.
Here is my problem:
I have a table like the following in SQL Server 2005:
order | taskid | main_person | temp_person | start_assign_date
1 | 3 | John | John | 2008-01-01 10:20:22
2 | 3 | John | Joe | 2008-02-05 15:20:22
3 | 3 | John | John | 2008-02-07 20:25:20
4 | 6 | Joe | Joe | 2008-01-01 10:20:22
5 | 6 | Joe | Mike | 2008-02-01 10:20:22
6 | 10 | Doug | Doug | 2008-01-01 10:20:22
7 | 7 | Russ | Russ | 2008-02-01 11:20:22
8 | 7 | Russ | Mike | 2008-02-08 12:20:22
9 | 7 | Russ | John | 2008-02-10 20:05:12
It was made to record who was in charge of a specific task at a specific time. Each task has its own main responsible person and some substitutes for that person as Temporary Persons (who did the task while main person was away). The Main Person's name is in the temp_person column when he is doing the task by himself.
I'd like to generate a report that shows:
- in a specific time period
- which persons were in charge of a specific task and
- for how long
Something like this:
From 2008-##-## to 2008-##-##
Task 3 - John - 15 days
Task 3 - Joe - 5 days
Task 6 - Joe - 18 days
Task 6 - Mike - 2 days
Task 10 - Doug - 20 days
I have some ideas to do that when there are both start and end dates for every record but I couldn't find a way to use the next assignment start date for each task, as the end date for its previous record (in that task group) to calculate the duration for that record.
I can group the tasks and users and put them in the chronological order but I can't indicate the next start date as the end date for the previous record (in specific task group) to use the date difference functions.
Any hint or comment would be appreciated.
Thanks
Sami
View 4 Replies
View Related
Dec 19, 2007
Hi all
As you know when you run a piece of TSQL scrypt in Query Analizer
at the bottom of the page , sql-server will show you the Time of completion of your code....is there any way to capture this time
from SQL-Server environment and use it in the Front-End Application
to inform the user?
Kind regards.
View 2 Replies
View Related
Dec 21, 2005
I have a data set like so:UTC_TIME Timestamp NodeID Message FlagLineStation11/19/2005 10:45:07 1132397107.91 1 3 5 1028103411/3/2005 21:05:35 1131051935.20 2 3 5 1009104311/25/2005 21:12:16 1132953136.59 3 3 5 10371049I added the UTC_TIME column in as aconversion of the unix timestamp inthe TIMESTAMP column.Keeping things simple and straightforward, I need to be able tocalculate the difference from one record to the next (ordered byTIMESTAMP or UTC_TIME) and output the result into another column in thetable.NODEID is the unique id.First, what is the function to do so if, say, I only wanted tocalculate the difference between 2 records as just a basic SELECTstatement. That way I can answer quick question based on any one or twoNODEID's.Second, how would I further that to continually calculate (as statedabove)?WOuld this be a stored procedure? A trigger? A cursor?I am learning as I go here. Any help is greatly appreciated.R.
View 4 Replies
View Related
Mar 17, 2008
Calculating time between two date In Sql Server 2005help me ..
View 3 Replies
View Related
Feb 8, 2007
I am using MS SQL Server 2000.
I have 4 text fields
1. event begin date
2. event begin time
3. event end date
4. event end time
I have to find the day and time difference in months days hours and minutes between the event begin date & time and the event end date & time – The event begin date and event end date are char(8) & event begin time and event end time are char(4) – with military time. I would need to combine the event begin date & event begin time to get the event begin date & time and the same for the event end date & time.
If the values of the 4 text fields are
event begin date = ‘20070207’, event begin time = ‘2015’, event end date = ‘20070208’, event end time = ‘0105’, the difference should be 0 month 0 day 4 hours 50 minutes.
Can somebody please help with MS SQL Server 2000 syntax?
View 1 Replies
View Related
Jun 17, 2014
I have a requirement to calculate the total outage time, based on logged fault tickets, of network nodes. Basically, multiple tickets may be raised for a single node and those tickets could overlap or sequence over a given period; the task here is to calculate the total time (hh:mm) of the outage in the period.
Ex:
3 tickets raised for a node outage over, say, a 48 hour period. Ticket 1 (spanning a total of 5 hours) overlaps with ticket 2 (spans 3 hours) by 1 hour; ticket 3 starts 5 hours after ticket 2 and spans 1 hour. Total outage time on the tickets is 7hrs + 1hr (T1+T2 minus the 1hr overlap) and the full time of T3.
In summary, it's calculating the total ticket time, allowing for overlaps of tickets, etc.
View 3 Replies
View Related
Oct 29, 2015
I have a table that contains an employee id and dates signifying time periods that those employees were working. I need to calculate anniversaries, such as 20 year, which are the sum of all periods spend working projected out to 20 years. For example,
emp_idstart_date end_date
1001 1998-01-01 2003-06-21
1002 1999-05-23 2008-03-28
1001 2004-08-19 NULL
1003 2004-10-12 2006-07-25
1004 2005-04-28 NULL
1002 2008-11-02 NULL
1003 2009-05-17 NULL
The periods in which the employees were inactive (the time period between active ranges) would push back their anniversary date, obviously. I'm only concerned with employees that are currently active (ie. the most recent record has a NULL end date). I thought about trying to use datediff to calculate the time between active periods, but I'm not sure how to go about doing it.
View 9 Replies
View Related
Dec 28, 2006
I am setting up a monitor to alert me if an SQL job has failed in the "last 20 minutes". This should run 24 hours a day, 7 days a week. My query looks something like this.
select * from TALMAIN.msdb.dbo.sysjobhistory where job_id = '7139D5D1-CD88-46E8-8324-5D5A0D8D3A27' and run_status <> 1 and
DATEPART(YYYY,GETDATE()) = substring(convert(char(8),run_date),1,4)and
DATEPART(MM,GETDATE()) = substring(convert(char(8),run_date),5,2) and
DATEPART(DD,GETDATE()) = substring(convert(char(8),run_date),7,2)and DATEPART(HH,GETDATE()) = substring(convert(char(8),run_time),1,2)and (DATEPART(MI,GETDATE()) - substring(convert(char(8),run_time),3,2)) <= 20.
The run_date and run_time columns in msdb..sysjobhistory are stored as integers. Tried a couple of things, but I am unable to convert both of them to datetime data type. The last conditions in the above logic hold true for only "2 digit" hour and minute values.
DATEPART(HH,GETDATE()) = substring(convert(char(8),run_time),1,2)and (DATEPART(MI,GETDATE()) - substring(convert(char(8),run_time),3,2)).
What about time values like 00:05 AM and single digit time values like 1:00 AM and 9:05 AM, for example?. I pasted some sample run_date and run_time values from sysjobhistory below.
run_date run_time
2006122821510 -- 02:15:10 AM (how to get the minute count?)
2006122821510 -- 02:15:10 AM (same as above)
20061227233014 -- 23:30:14 PM (this is strt forward)
20061227233014 -- 23:30:14 PM (same as above)
200612273016 -- 00:30:16 AM (how to get minute count?)
200612273015 -- 00:30:15 AM (how to get minute count?)
Is there a simpler logic to achieve this? Hope I was clear, else let me know. Please advise. Thank you.
View 5 Replies
View Related
Mar 7, 2007
I'm trying to find a solution to for a report i am building and was hoping that some of you will share your expertise with me. Basically, I need to work out how long an Incident Ticket was suspended (ie it's status is "on hold").
The data is stored something similar to the following...
Ticket Date Status
------ ---- ------
333 14/03/2005 10:24:19 "to on hold"
333 14/03/2005 15:23:01 "from on hold"
334 14/03/2005 11:14:11 "to on hold"
334 14/03/2005 16:26:15 "from on hold"
335 15/03/2005 10:10:15 "to on hold"
335 15/03/2005 11:15:35 "from on hold"
335 15/03/2005 13:26:10 "to on hold"
335 15/03/2005 14:30:59 "from on hold"
335 16/03/2005 14:00:05 "to on hold"
335 16/03/2005 16:45:15 "from on hold"
336 16/03/2005 10:10:15 "to on hold"
336 16/03/2005 12:45:12 "from on hold"
This is the result i'd like to see....
Ticket Start Hold End Hold Time Suspended
------ ---------- -------- --------------
333 14/03/2005 10:24:19 14/03/2005 15:23:01 datediff(...
334 14/03/2005 11:14:11 14/03/2005 16:26:15 datediff(...
335 15/03/2005 10:10:15 15/03/2005 11:15:35 datediff(...
335 15/03/2005 13:26:10 15/03/2005 14:30:59 datediff(...
335 16/03/2005 14:00:05 16/03/2005 16:45:15 datediff(...
336 16/03/2005 10:10:15 16/03/2005 12:45:12 datediff(...
Has anybody done something along the same lines? If so, could you point me in the right direction?
Thanks in anticipation
Jon
View 6 Replies
View Related
Mar 6, 2008
We have a proc that runs nightly which updates stats. For each database it will run dbcc updateusage on each table, then then sp_updatestats on the database itself.
This process normally takes about an hour, but recently the time has gone up dramatically.
I am looking at ways of making the run faster. One suggestion was to split the work and have it run in parrallel, with multiple procs all doing the same job but on different databases. So for example, I could have a proc that would determine which databases would take the longest to process, and then call 3 different copies of our update proc, each getting a different set of databases to process.
If I went this route, how could I determine which databases would take the longest to complete this process? I'm investigating determining this from sysindexes' rowmodctr, or maybe just database size?
Any suggestions on how I could get an estimate of which dbs would be the most costly to update stats? This is for SQL Server 2000.
Thanks
View 3 Replies
View Related
Apr 16, 2015
I'm trying to calculate the time difference between a date field and today's date in days. The date field is not mandatory and can therefore be blank. I'm trying to execute the following query:
SELECT employee_code, Civil_ID, DATEDIFF(Day, Civil_ID, GETDATE())
FROM ODEV_VIEW_Credentials_Expiry_Dates
WHERE Civil_ID IS NOT NULL AND Civil_ID != ''
ORDER BY employee_code
I keep getting the following message:
The conversion of a varchar data type to a datetime data type resulted in an out-of-range value.
Warning: Null value is eliminated by an aggregate or other SET operation.
No matter what filter I use to process non-blank dates, it never works.
View 12 Replies
View Related
Oct 7, 2015
I need the SQL to calculate the duration between a day and time, no specific date.Â
For example:
Sun 00:00 > Mon 08:00 = 5.67 days
So there is no date, it's just the general duration (in days), from a specific day and time to a specific day and time.
View 3 Replies
View Related
May 20, 2014
I have a requirement to be able to calculate the transit time between international locations when I have the flight departure time and flight arrival times and departure and arrival locations.
We have a problem though, in that the datetime stored are local times, and the journeys can involve crossing the international date line in either direction, so it is possible for the arrival time to be earlier than the departure time!
To give a famous example, if you flew Concorde from London to Washington, you could depart at 10am on the 1st of June (London time) and arrive at 8.00am on 1st June (Washington time)
Even worse, you could leave Brisbane at 2.00 am on the 1st June, cross the International Date Line and arrive at San Francisco at 23:00 on 31st May!
View 6 Replies
View Related
Nov 12, 2007
Hi,
We need to select rows from the database that have been recently inserted/updated. We have a main primary table (COMMIT_TEST) and a second update table (COMMIT_TEST_UPDATE). The update table contains the primary key and a LAST_UPDATE field which is a datetime (to tell us when an update occurred). Triggers on the primary table are used to populate the update table.
If we insert or update the primary table in a transaction, we would expect that the datetime of the insert/update would be at the commit, however it seems that the insert/update statement is cached and getdate() is executed at the time of the cache instead of the commit. This causes problems as we select rows based on LAST_UPDATE and a commit may occur later but the earlier insert timestamp is saved to the database and we miss that update.
We would like to know if there is anyway to tell the SQL Server to not execute the function getdate() until the commit, or any other way to get the commit to create the correct timestamp.
We are using default isolation level. We have tried using getdate(), current_timestamp and even {fn Now()} with the same results. SQL Queries that reproduce the problem are provided below:
/* Different functions to get current timestamp €“ all have been tested to produce the same results */
/*
SELECT GETDATE()
GO
SELECT CURRENT_TIMESTAMP
GO
SELECT {fn Now()}
GO
*/
/* Use these statements to delete the tables to allow recreate of the tables */
/*
DROP TABLE COMMIT_TEST
DROP TABLE COMMIT_TEST_UPDATE
*/
/* Create a primary table and an UPDATE table to store the date/time when the primary table is modified */
CREATE TABLE dbo.COMMIT_TEST (PKEY int PRIMARY KEY, timestamp) /* ROW_VERSION rowversion */
GO
CREATE TABLE dbo.COMMIT_TEST_UPDATE (PKEY int PRIMARY KEY, LAST_UPDATE datetime, timestamp ) /* ROW_VERSION rowversion */
GO
/* Use these statements to delete the triggers to allow reinsert */
/*
drop trigger LOG_COMMIT_TEST_INSERT
drop trigger LOG_COMMIT_TEST_UPDATE
drop trigger LOG_COMMIT_TEST_DELETE
*/
/* Create insert, update and delete triggers */
create trigger LOG_COMMIT_TEST_INSERT on COMMIT_TEST for INSERT as
begin
declare @time datetime
select @time = getdate()
insert into COMMIT_TEST_UPDATE (PKEY,LAST_UPDATE)
select PKEY, getdate()
from inserted
end
GO
create trigger LOG_COMMIT_TEST_UPDATE on COMMIT_TEST for UPDATE as
begin
declare @time datetime
select @time = getdate()
update COMMIT_TEST_UPDATE
set LAST_UPDATE = getdate()
from COMMIT_TEST_UPDATE, deleted, inserted
where COMMIT_TEST_UPDATE.PKEY = deleted.PKEY
end
GO
/* In our application deletes should never occur so we don€™t log when they get modified we just delete them from the UPDATE table */
create trigger LOG_COMMIT_TEST_DELETE on COMMIT_TEST for DELETE as
begin
if ( select count(*) from deleted ) > 0
begin
delete COMMIT_TEST_UPDATE
from COMMIT_TEST_UPDATE, deleted
where COMMIT_TEST_UPDATE.PKEY = deleted.PKEY
end
end
GO
/* Delete any previous inserted record to avoid errors when inserting */
DELETE COMMIT_TEST WHERE PKEY = 1
GO
/* What is the current date/time */
SELECT GETDATE()
GO
BEGIN TRANSACTION
GO
/* Insert a record into the primary table */
INSERT COMMIT_TEST (PKEY) VALUES (1)
GO
/* Simulate additional processing within this transaction */
WAITFOR DELAY '00:00:10'
GO
/* We expect at this point that the date is written to the database (or at least we need some way for this to happen) */
COMMIT TRANSACTION
GO
/* get the current date to show us what date/time should have been committed to the database */
SELECT GETDATE()
GO
/* Select results from the table €“ we see that the timestamp is 10 seconds older than the commit, in other words it was evaluated at */
/* the insert statement, even though the row could not be read with a SELECT as it was uncommitted */
SELECT * FROM COMMIT_TEST
GO
SELECT * FROM COMMIT_TEST_UPDATE
Any help would be appreciated, we understand we could make changes to the application/database to approximate what we need, but all the solutions have identified suffer from possible performance issues, or could still lead to missing deals (assuming the commit time is larger than some artifical time window).
Regards,
Mark
View 8 Replies
View Related
Oct 7, 2015
I have a table called employee_punch_record that we use to store employee time clock punches.
The columns are:
employeeid,
punch_timestamp,
punch_type (In / Out),
closed (bit used as status for open or closed pay periods),
ident
Here are some examples of a record:
bkingery62015-10-06 16:59:04.000In0
bkingery72015-10-06 16:59:09.000Out0
bkingery82015-10-06 16:59:13.000In0
bkingery92015-10-06 18:22:44.000Out0
bkingery102015-10-06 18:22:46.000In0
bkingery112015-10-06 18:22:48.000Out0
bkingery122015-10-06 18:22:51.000In0
tfeller52015-10-05 17:00:05.000In0
We are using SQL Server 2008 as our database and use Access as a GUI. I am looking to create a form in Access where employees can access their time card and request changes from management. I want to use the format from the attached screen shot for the form. I pretty much know how to do it all, the only point of complication is trying to figure out the easiest way to get the transaction punch record data on employee_punch_record into a format where I can easily populate the form in the horizontal format you see in the screen shot.
I am not super strong in SQL, but figure I can do it using a formatting table of some sort. quick and easy way to move transaction records into a more horizontally oriented record?
View 0 Replies
View Related
Oct 3, 2015
I hope to update a DateTime column value with a Time input parameter.  Poor attempt below but it looks like the @ApptTime param is coming in as 10:45:00.0000000 and I might have an existing @SendOnDate as: 2015-10-05 07:00:00.000...I hope to end up with 2015-10-05 10:45:00.000
ALTER PROCEDURE [dbo].[SendEditUPDATE]
@QuePoolID int=null
,@ApptTime time(7)
,@SendOnDate datetime
[code]...
View 14 Replies
View Related
Apr 21, 2015
SELECTÂ
  CONVERT(VARCHAR(10),attnc_chkin_dt,101) as INDATE,
  CONVERT(VARCHAR(10),attnc_chkin_dt,108) as TimePart
FROM pmt_attendance
o/p
indate   04/18/2015
time part :17:45:00
I need to convert this 17:45:00 to 12 hours date format...
View 8 Replies
View Related
Apr 30, 2007
Hi there,
We have a Principle, Mirror and Witness set-up and all is working fine, however, the transaction logs for a few large databases just keep growing over a the course of the month until the disk is full. As I understand it, and having tried you can't dump the transaction logs while mirroring is configured, is there any way at all to commit and truncate the logs while mirroring is running or do I have to manually remove the mirroring each month, dump the transaction logs and then re-enable it again after doing the backup/restore?
The databases in question are about 6GB in data size and the transaction logs can grow to be about 60GB in a month.
Would a normal SQL Server 2005 backup truncate the logs if I configured this? At the moment we use Litespeed for SQL server for nightly backups.
Any advice would be very helpful.
Thanks
Ed
View 5 Replies
View Related
Nov 5, 2015
I have a table that i'm trying to pull the first transaction and last transaction per prodid. The first transaction, the ctrid should be 'TOPPEntry'.Â
sample raw data result
prodid--------lineid------itemid---------ctrid----------createddate--
=================================================================
TOP02296228--Line15-----TTC3071-IR------TOPPEntry------2015-01-03 07:45:31.000--input
TOP02296228--Line15-----TTC3071-IR------TOPCBFG--------2015-01-07 16:18:26.000--fg--done processing
TOP02296229--Line15-----TTC3071-IR------TOPPEntry------2015-01-04 07:45:31.000--input
TOP02296229--Line15-----TTC3071-IR------TOPLens--------2015-01-05 12:12:31.000--wip--wip means still in process
TOP02296230--Line15-----TTC3071-IR------TOPPEntry------2015-01-05 08:45:31.000--input
TOP02296230--Line15-----TTC3071-IR------TOPCBSCP-------2015-01-06 14:18:42.000--scrap--done processing
[code]...
View 12 Replies
View Related
Jun 4, 2015
Is it possible to take any type of backup during transaction or we can say in b/w the transaction?
View 9 Replies
View Related
Nov 30, 2006
Hi Friends,
Is it possible to create single sql connection and running several transaction at the same time? If so, can you explain?
Thanks.
View 2 Replies
View Related
Oct 2, 2007
Hi, i'm trying to run wrap a transaction around a block of code to make sure every statement is carried out. Here's what i have:
using (TransactionScope ts = new TransactionScope())
{ ... ts.Complete();}The code executed in the ... part is a set of sql commands within my dal. If this above expression takes less than 30 seconds everything is carried out correctly, however if it takes longer than 30 seconds i receive an sql timeout error. I tried modify the above code to:
using (TransactionScope ts = new TransactionScope(TransactionScopeOption.Required, TimeSpan.FromMinutes(5)))
{ ... ts.Complete();}
But it did not seem to make a difference. I suppose the easiest option would be to increase the timeout for every sql command in my dal but i feel that the 30 second timeout is sufficient for a single command.
Appreciate if someone could tell me how this should be done correctly. Thanks
View 2 Replies
View Related
Nov 4, 2015
My data is in 4 columns and multiple rows, like this
PartNo  Quantity TransactionType        TransactionDate
aaa      25        Incoming                   2015-03-01
aaa       25        Incoming                   2015-03-01
aaa      50        Transfer                    2015-03-02
bbb      30        Incoming                  2015-03-03
bbb      30        Transfer                    2015-03-03
ccc       50        Incoming                  2015-05-15
ccc       75        Incoming                  2015-05-20
ccc       50         Transfer                   2015-05-18
ccc       75        Transfer                   2015-05-21
What I need to achieve is sum the quantities for a given transaction type, group it by Part Number and add an additional column where the Transaction Date for Transfer Type rows would become the Transfer Date. Each part would have one row. The resulting data would look like this.
PartNo  Quantity  IncomingDate  TransferDate
aaa       50          2015-03-01     2015-03-02
bbb       30           2015-03-03     2015-03-03
ccc        125        2015-05-15      2015-05-21
How to achieve this goal.
View 5 Replies
View Related
Oct 22, 2015
I have heard about fn_dblog() function, Is it possible to find a transaction in a backup using fn_dblog() function?
View 3 Replies
View Related
