Transact SQL :: Get Duration Of Each Event 0 Which Has Other Events Before And After?
Jun 22, 2015
I have a table that holds log event records, that keep getting appended. I need to get the duration of the each event 0 which has other events before and after. How can I do this - to get event duration of event 0 and the cumulative.
ID Event Date
1 1 2015-06-21 21:01:44.457
2 1 2015-06-21 21:01:44.457
3 0 2015-06-21 21:02:04.780
4 1 2015-06-21 21:02:32.600
5 0 2015-06-21 21:02:57.967
6 1 2015-06-21 21:03:30.513
View 7 Replies
ADVERTISEMENT
Jun 4, 2015
I have the following SQL query
SELECT
[Req_ID]
,[Service_Name]
,[Req_Started_Date]
,[Task_Name]
,[Task_Status]
,[Performer_Full_Name]
[code]....
Which works fine, but what I need to calculate the total duration of a request based on the duration of the tasks completed in the request based on Req_ID. I would like to use the CASE statement I have to determine the SLA_Mins for each task and add them together to get total request SLA_Mins.
Below is the create table schema and data
GO
/****** Object: Table [dbo].[MidrangeOtherSourceControl] Script Date: 06/03/2015 18:13:15 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[MidrangeOtherSourceControl](
[Req_ID] [float] NULL,
[Service_Name] [nvarchar](255) NULL,
[code]....
View 9 Replies
View Related
Apr 15, 2015
When you view the Extended Events "Watch Live Data" is the duration in milliseconds or microseconds? I'm assuming it's milliseconds, but if you look at the timestamp difference from start to complete it doesn't add up to the duration amount? It looks like it's just the difference between the timestamps?
View 5 Replies
View Related
Jun 11, 2015
I am wanting to get/filter on all queries and procs that take longer than 2 seconds to run (I'll balance real values later) but I'm not sure which Action out of the XE that I need.
I am using SQL Server 2014 and thought I had used sqlserver.sql_statement_completed.duration > 2000 in a previous version.
View 5 Replies
View Related
Feb 3, 2014
I am using this code for LongRunning Queries.
CREATE EVENT SESSION LongRunningQuery
ON SERVER
ADD EVENT sqlserver.sql_statement_completed
(
ACTION (sqlserver.sql_text, sqlserver.tsql_stack)
WHERE sqlserver.sql_statement_completed.duration > 60000
[Code] ...
Here Instead of writing to XML file how can send an EMAIL if a query runs more than 1 minute in my server ?
View 2 Replies
View Related
Jun 6, 2008
Hi all,
Thanks for setting up such a great site and forum.
Here is my problem:
I have a table like the following in SQL Server 2005:
order | taskid | main_person | temp_person | start_assign_date
1 | 3 | John | John | 2008-01-01 10:20:22
2 | 3 | John | Joe | 2008-02-05 15:20:22
3 | 3 | John | John | 2008-02-07 20:25:20
4 | 6 | Joe | Joe | 2008-01-01 10:20:22
5 | 6 | Joe | Mike | 2008-02-01 10:20:22
6 | 10 | Doug | Doug | 2008-01-01 10:20:22
7 | 7 | Russ | Russ | 2008-02-01 11:20:22
8 | 7 | Russ | Mike | 2008-02-08 12:20:22
9 | 7 | Russ | John | 2008-02-10 20:05:12
It was made to record who was in charge of a specific task at a specific time. Each task has its own main responsible person and some substitutes for that person as Temporary Persons (who did the task while main person was away). The Main Person's name is in the temp_person column when he is doing the task by himself.
I'd like to generate a report that shows:
- in a specific time period
- which persons were in charge of a specific task and
- for how long
Something like this:
From 2008-##-## to 2008-##-##
Task 3 - John - 15 days
Task 3 - Joe - 5 days
Task 6 - Joe - 18 days
Task 6 - Mike - 2 days
Task 10 - Doug - 20 days
I have some ideas to do that when there are both start and end dates for every record but I couldn't find a way to use the next assignment start date for each task, as the end date for its previous record (in that task group) to calculate the duration for that record.
I can group the tasks and users and put them in the chronological order but I can't indicate the next start date as the end date for the previous record (in specific task group) to use the date difference functions.
Any hint or comment would be appreciated.
Thanks
Sami
View 4 Replies
View Related
Dec 11, 2006
Hi everyone,
I was wondering how do for 'Log Events' info going to Event Viewer Windows visor. Is it possible or it's just only private info for you SSIS.
Thanks for your input,
View 2 Replies
View Related
Jul 10, 2003
Hello Everyone,
I am backing up my all the databases (around 50 servers and 500 database) using scheduled jobs. I backup my transaction log files at every two hours of interval and databases on daily basis.
I have set option of "Write to Windows Application Event Log" - When job fails during the creation of job in the "Notification Tab" of Create New Job.
As per documentation SQL server automatically records some of the events to windows application event log. After succesful completion of Log backup and DB backup, event gets logged in Windows Application Event Log. And when job fails, I get two events logged in the Windows Application Event Log file, one due to my setting and other automatically by SQL Server.
Due to this Windows event log file is growing much faster and I have to clear it in every 3-4 days.
My quesiton - Is there a way such that to get only failures event logged in Windows Application event log file and any successful backup jobs should not go to Windows application event file?
Can any suggest some idea what should I do?
I am using SQL Server 2000 with SP3 on Windows 2000 Advanced server. Some of my databases are still using Version 7.0/6.5 on NT.
Thanks.
View 5 Replies
View Related
Dec 26, 2007
Hi,
I am looking to implement a custom event handler that will also retain the original event arguments (in addition to several custom arguments).
Specifically, I am looking to pass custom arguments into a SqlDataSourceStatusEventHandler, but also want to be able to access the Command.Parameters.
I have implemented a new Event Arguments class (derived from System.EventArgs), new Event class and delegate, but do not know how to retain the SqlDataSourceEventArgs. I would really appreciate your suggestions!
Thanks!
View 2 Replies
View Related
Mar 1, 2007
I was wondering if anyone knew of a way to disable the following, SQLISPackage start/finish events sent to windows event logs everytime a SSIS package is executed and completed.
Regards
Ryan Dickson
View 1 Replies
View Related
Feb 25, 2014
I am trying to use xquery to get event data back from extended events. I am trying to use some sample data from Grant Fritchey but I am getting null records back. Below is the xml - I just want to retrieve a distinct list of the client_hostname and client_app_name.
<event name="login" package="sqlserver" timestamp="2014-02-19T23:53:54.299Z">
<data name="is_cached"><value>true</value></data><data name="is_dac">
<value>false</value></data><data name="database_id"><value>7</value>
</data><data name="packet_size"><value>8000</value></data><data name="options">
[Code] ....
The query I have that doesn't work is :
WITH xEvents AS
(SELECT object_name AS xEventName,
CAST (event_data AS xml) AS xEventData
FROM sys.fn_xe_file_target_read_file
('C:LoginTraceShared_0*.xel', NULL, NULL, NULL))
SELECT distinct top 1000 xEventName,
xEventData.value('(/event/data[@action_name=''Client_APP_Name'']/value)[1]','varchar') Client_APP_Name,
xEventData.value('(/event/data[@action_name=''Client_Host_Name'']/value)[1]','varchar') Client_Host_Name
FROM xEvents
View 3 Replies
View Related
Oct 24, 2015
We know we can use the event lock_deadlock and xml_deadlock_report to capture the deadlock info, however I also want to capture the execution plans for all of the SPIDs in the deadlock graph, how to output the execution plans to the extended events trace results either ? such as if there is an action for execution plan or workaround for it ?If there is no built in action for execution plan , may I know if we can add the customized info to the extended events results file also ? Such as when the deadlock related event happens , then we can run a query to get some info ,then added the info along with other info such as sql_text, dbname etc to the events trace results file either ? The reason is if we also know the execution plans when the deadlock happens, it is useful to turning the query based on the execution plans to reduce deadlock happening .
View 5 Replies
View Related
Sep 23, 2015
I am storing duration of a lot of jobs in a column in a table per job. This duration is in seconds and an integer datatype.
Sample data:
Job Duration date
Job1 25 2015/9/23
Job2 30 2015/9/23
Job3 45 2015/9/23
Job4 1 2015/9/22
Now I need to get average duration per day for every month. Is this possible? I have a calendar table that has every single day month year microsecond millisecond second minute and hour.
View 5 Replies
View Related
Oct 26, 2015
I am working on one logic. I have a table as below.
Declare @Table table (ID int, StartDate datetime, EndDate datetime)
Insert Into @Table (ID, StartDate, EndDate)
Values (1, '2013-01-01', '2013-12-31')
, (1, '2014-01-01', '2014-06-30')
, (2, '2014-01-01', '2014-07-31')
, (2, '2014-08-02', '2014-08-30')
select * from @Table
I need as below.
ID, StartDate, EndDate
1, '2013-01-01', '2014-06-30'
2, '2014-01-01', '2014-07-31'
2, '2014-08-02', '2014-08-30'
Means If ID is same for two or more than two records then difference between first row's EndDate and second row's StartDate is 1 day then we should get one record as output. How can we built this logic in T-SQL ?
View 12 Replies
View Related
Oct 7, 2015
I need the SQL to calculate the duration between a day and time, no specific date.
For example:
Sun 00:00 > Mon 08:00 = 5.67 days
So there is no date, it's just the general duration (in days), from a specific day and time to a specific day and time.
View 3 Replies
View Related
Jun 17, 2015
Need calculating the count of events on each day. I have an event log table as shown below.
DECLARE @EventLog TABLE ( event_id int, status_id varchar(20) , dttm datetime )
INSERT INTO @EventLog
SELECT '100','Inplace','01/05/2015 05:00' UNION ALL
SELECT '100','Removed','03/05/2015 10:00' UNION ALL
SELECT '100','Inplace','05/05/2015 10:41' UNION ALL
[Code] ....
I need an output to look like on each day how many events were in place.
E.g.: for the month on May , Event_id 100 was inplace on 1st and removed on 3rd , so on 1st may 2 event_ids (100, 103) hence 2 .
event_ids - 103 / 104 and inplace the whole month and not removed. so its calculated the count as 2 til towards teh end of the month.
So I need to count of all each event_id in place for each day in may.
How to calculate the missing dates to ...
View 7 Replies
View Related
May 27, 2015
We are planning to convert or change all existing Traces to Extended Events in SQL server 2012. What is the procedure to convert custom traces. We have already created some below custom traces: like this we are planning to convert for all servers.
exec sp_trace_setevent @TraceID, 20, 23, @on
exec sp_trace_setevent @TraceID, 20, 8, @on
exec sp_trace_setevent @TraceID, 20, 12, @on
exec sp_trace_setevent @TraceID, 20, 64, @on
exec sp_trace_setevent @TraceID, 20, 1, @on
exec sp_trace_setevent @TraceID, 20, 21, @on
[code]...
View 6 Replies
View Related
Jun 20, 2007
Hello experts. I have been searching for anything about this but found very little. What are the events logged in SQL Server Error Logs aside from Successful/Failed Login, Backup/Restore/Recover database and, start/init sql server? Can we configure this to log other events, like CREATE or DBCC events for example? If so, how? Thanks a lot.
View 1 Replies
View Related
Jan 28, 2006
I have a start date, end date for each event.
I want to list all events between the start and end date comes in Saturday or Sunday.
in SQL server 2005 TSQL statement.
any insights ?
View 1 Replies
View Related
Apr 28, 2015
I have a log table in which alarm events are logged (a many relation to a main table) where EventId is the foreign key in the log table.
In this table all events related to a given incident (EventID) are logged, but it is specifically two eventtypes which is of interest, thats the "into alarm" represented by an integer value "0" in the column "EventTypeId" and the "restored represented by an integer value of "2". Each state of change has a timestamp of datetime.For each incident (EventId) there can be multiple "into alarm" and "restore" rows, there can also be other events which has no interests. Only the timediff between each "0" and "2" accumulated is of interest.
There's one more little twitch, it can occure that when the query is run, the "2" restored state is not yet present, the query should not return a result for that "0" into alarm when the "2" restored is not present, unless there was a complete alarm/restore session.
CREATE TABLE [dbo].[AlarmHistoryLog](
[EventId] [int] NOT NULL,
[EventSeq] [int] IDENTITY(1,1) NOT NULL,
[EventTypeId] [int] NOT NULL,
[EventTime] [datetime] NOT NULL,
[EventDescription] [nvarchar](250) NOT NULL,
[Comment] [nvarchar](4000) NULL,
[UserID] [int] NULL,
[ReceiverID] [int] NULL
) ON [PRIMARY]
View 5 Replies
View Related
Aug 27, 2015
I have the following code block
CREATE TABLE #tbl_1 (event_time DATETIME2, SID INT ,NAME VARCHAR(20) )
INSERT INTO #tbl_1 VALUES ('2015-08-27 13:47:24.123','150','abc')
INSERT INTO #tbl_1 VALUES ('2015-09-27 13:47:24.123','149','acb')
INSERT INTO #tbl_1 VALUES ('2015-10-27 13:47:24.123','148','cba')
CREATE TABLE #tbl_2 (event_time DATETIME2, SID INT ,NAME VARCHAR(20) )
INSERT INTO #tbl_2
SELECT * FROM #tbl_1 where ? SELECT * FROM #tbl_2
My requirement is to insert values into #tbl2 that are in current month which are event_time values '2015-08-27'
View 4 Replies
View Related
Nov 29, 2015
I have a query that returns material(items) that are used in an event on a certain day.
SELECT C.categoryName, count(I.itemID) AS InMission
from items as I
RIGHT JOIN Categories AS C on I.categoryID = C.categoryID
INNER JOIN LinkMissionItem as LM on I.itemID = LM.itemID
INNER JOIN Missions as M on LM.missionID = M.MissionID
where '2015/12/19' BETWEEN M.freightLeave and M.freightReturn AND isReturned = 0
GROUP BY C.categoryName, C.categoryID
ORDER BY C.categoryID
There are a total of 20 categories and I would like all the categories listed in the result even though there are no items booked in a mission. At the moment, I can only get the categories that have items in that category booked in a mission. I hoped that the RIGHT JOIN on the categories table would do the trick but it doesn't.
View 4 Replies
View Related
Jun 2, 2015
Recently we migrated our environment to 2012.
We are planning to implement Xevents in all the servers in place of Trace files and everything is working fine.
Is it possible to configure Extended event to trigger a mail whenever any event (example dead lock) occurs.
I have gone through so many websites but i never find.
View 13 Replies
View Related
Oct 25, 2011
My SQL Server 2005 SP4 on Windows 2008 R2 is flooded with the below errors:-
Date 10/25/2011 10:55:46 AM
Log SQL Server (Current - 10/25/2011 10:55:00 AM)
Source spid
Message
Event Tracing for Windows failed to send an event. Send failures with the same error code may not be reported in the future. Error ID: 0, Event class ID: 54, Cause: (null).
Is there a way I can trace it how it is coming? When I check input buffer for these ids, it looks like it is tracing everything. All the general application DMLs are coming in these spids.
View 2 Replies
View Related
Apr 8, 2008
I have been testing with the WMI Event Watcher Task, so that I can identify a change to a file.
The WQL is thus:
SELECT * FROM __InstanceModificationEvent within 30
WHERE targetinstance isa 'CIM_DataFile'
AND targetinstance.name = 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Backup\AdventureWorks.bak'
This polls every 30 secs and in the SSIS Event (ActionAtEvent in the WMI Task is set to fire the SSIS Event) I have a simple script task that runs a message box).
My understanding is that the event polls every 30 s and if there is a change on the AdventureWorks.bak file then the event is triggered and the script task will run producing the message.
However, when I run the package the message is occurring every 30s, meaning the event is continually firing even though there has been NO change to the AdventureWorks.bak file.
Am I correct in my understanding of how this should work and if so why is the event firing when it should not ?
View 2 Replies
View Related
May 31, 2007
Server 2003 SE SP1 5.2.3790 Sql Server 2000, SP 4, 8.00.2187 (latest hotfix rollup)
We fixed one issue, but it brought up another. the fix we applied stopped the ServicesActive access failure, but now we have a failure on MSSEARCH. The users this is affecting do NOT have admin rights on the machine, they are SQL developers.
We were having
Event Type: Failure Audit
Event Source: Security
Event Category: Object AccessEvent ID: 560
Date: 5/23/2007
Time: 6:27:15 AM
User: domainuser
Computer: MACHINENAME
Description:
Object Open:
Object Server: SC Manager
Object Type: SC_MANAGER OBJECT
Object Name: ServicesActive
Handle ID: -
Operation ID: {0,1623975729}
Process ID: 840
Image File Name: C:WINDOWSsystem32services.exe
Primary User Name: MACHINE$
Primary Domain: Domain
Primary Logon ID: (0x0,0x3E7)
Client User Name: User
Client Domain: Domain
Client Logon ID: (0x0,0x6097C608)
Accesses: READ_CONTROL
Connect to service controller
Enumerate services
Query service database lock state
Privileges: -
Restricted Sid Count: 0
Access Mask: 0x20015
Applied the following fix
http://support.microsoft.com/kb/907460/
Now we are getting
Event Type: Failure Audit
Event Source: Security
Event Category: Object Access
Event ID: 560
Date: 5/23/2007
Time: 10:51:23 AM
User: domainuser
Computer: MACHINE
Description:
Object Open:
Object Server: SC Manager
Object Type: SERVICE OBJECT
Object Name: MSSEARCH
Handle ID: -
Operation ID: {0,1627659603}
Process ID: 840
Image File Name: C:WINDOWSsystem32services.exe
Primary User Name: MACHINE$
Primary Domain: domain
Primary Logon ID: (0x0,0x3E7)
Client User Name: user
Client Domain: domain
Client Logon ID: (0x0,0x60D37C1A)
Accesses: READ_CONTROL
Query service configuration information
Query status of service
Enumerate dependencies of service
Query information from service
Privileges: - Restricted Sid Count: 0 Access Mask: 0x2008D
View 4 Replies
View Related
Nov 2, 2007
Hi all,
Can we get the event properties by using a query?
Are there any extended stored procuder to get the above?
Scenario:
>Desktop>Right Click on My Computer
>Go to Manage and click
>Expand System Tools
>Expand Event Viewer
>Application
click on one event.We can get the log info which is the manual procudure.
But now i want to get the event properties through the Query analyzer...
Any help would be great?
Thanks,
View 4 Replies
View Related
Oct 22, 2007
We recently upgraded to SQL 2005 from SQL 2000. We have most of our issues ironed out however about every 1 minute there is a message in the Application Event log and the SQL log that states:
EVENT ID 18456 Login Failed for the users DOMAIN/ACCOUNT [CLIENT: <local machine>]
This is a state 16 message which I thought meant that the account does not have access to the default database. The account is actually the account that the SQL services run under.
Any ideas? We can't seem to figure this one out. We actually upgraded to 2005 from 2000 and had an error appear after every reboot that prevented the SQL Agent from running(This application has failed to start because GAPI32.dll was not found. Re-installing the application may fix this problem.) We did a full uninstall of SQL and reinstalled fresh and restored the databases from .bak files and that is when the EVENT ID 18546 started occuring every minute.
We don't have any SQL heavy hitters here so please be detailed with any possible solutions. That you very much for any help you can provide!
David
View 5 Replies
View Related
Mar 20, 2004
I would like to AUTOMATICALLY count the event for the month BEFORE today
and
count the events remaining in the month (including those for today).
I can count the events remaining in the month manually with this query (today being March 20):
SELECT Count(EventID) AS [Left for Month],
FROM RECalendar
WHERE
(EventTimeBegin >= DATEADD(DAY, 1, (CONVERT(char(10), GETDATE(), 101)))
AND EventTimeBegin < DATEADD(DAY, 12, (CONVERT(char(10), GETDATE(), 101))))
Could anyone provide me with the correct syntax to count the events for the current month before today
and
to count the events remaining in the month, including today.
Thank you for your assistance in advance.
Joel
View 1 Replies
View Related
Jan 20, 2005
If monitoring for duration with sql profiler, what does the number represent ie 2733906 is it milliseconds, thousandths, looked in BOL no clear definition
View 2 Replies
View Related
Aug 1, 2002
Can someone please tell me what unit of measurement the Duration column is in when running SQL Profiler? I assume milleseconds, but am not sure.
I'm trying to filter on this and want to be sure I'm not missing anything.
Thanks!
View 1 Replies
View Related
May 13, 2015
I found this nifty code on stackoverflow that works well but I'm trying to send the results to a text file and the column lengths are huge. I used CAST for the first line and it worked great but I can't seem to make it work with duration. Here's the original code:
SELECT
j.name,
h.run_status,
durationHHMMSS = STUFF(STUFF(REPLACE(STR(h.run_duration,7,0),
' ','0'),4,0,':'),7,0,':'),
[code]....
how to run a CAST on DURATION?
View 5 Replies
View Related
Jan 18, 2007
I am trying to get a query that will allow me to report the time taken to complete a certain training module.
The database itself does not have a duration field so I am tring to get the duration by using MIN and MAX. I can get the timing for when the module was opened and the time for the last mouse click on it, from this I need to be able to calculate the time taken to complete.
Query I am using to get the basic info comes from 3 tables so I have only attached the relevent output. Query used is as follow:
SELECT *
FROM PPS_SCOS, PPS_TRANSCRIPTS, PPS_TRANSCRIPT_DETAILS, PPS_PRINCIPALS
WHERE PPS_SCOS.SCO_ID = PPS_TRANSCRIPTS.SCO_ID
AND PPS_TRANSCRIPTS.TRANSCRIPT_ID = PPS_TRANSCRIPT_DETAILS.TRANSCRIPT_ID
AND PPS_TRANSCRIPTS.PRINCIPAL_ID = PPS_PRINCIPALS.PRINCIPAL_ID
AND PPS_SCOS.NAME LIKE 'MTM-106 The Dangers of Smoking'
AND PPS_PRINCIPALS.NAME LIKE 'Nigel Cordiner'
AND PPS_TRANSCRIPTS.TICKET NOT LIKE 'l-%'
ORDER BY PPS_TRANSCRIPT_DETAILS.DATE_CREATED
Output:
pps_scospps_scospps_transcript_detailspps_principalspps_principals
SCO_IDNAME DATE_CREATED PRINCIPAL_ID NAME
136850MTM-106 The Dangers of Smoking08:17:2516287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:17:2516287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:17:4016287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:18:2516287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:18:5716287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:19:1416287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:19:4716287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:20:2116287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:20:4416287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:21:2616287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:22:1316287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:24:5516287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:25:1216287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:25:2916287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:26:4916287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:27:0216287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:27:2916287Nigel Cordiner
136850MTM-106 The Dangers of Smoking08:27:4316287Nigel Cordiner
Have added the column heading and the tables the output comes from.
Relatively new to SQL so any help would be greatly received.
View 4 Replies
View Related
