I have an order with the time 08/03/2015 7:30 08/03/2015 10:30 ..I have availability with the time 08/03/2015 07:00:00 to 08/03/2015 19:30:00...Here the availability falls for 3 hours only..My requirement is that For order if availability< 4hours i don't want to show employee.How to apply the condition.
View 7 RepliesI write a query to get some data as the following. but i need when a user check specified condition a query parameter change to specified condition :
create proc proc_ReservationDetails
(
@status nvarchar(50) = null
)
as
begin
select reservationId, reservationStatus, reservationDesc
[Code] .....
If I Have a table like
Id(identity), PupilPersonId, EducationTypeId,VehicleTypeId,EducationDate, EducatorId,Canceled
661187 9242382 2 1 2015-07-07 00:00:00.000 O_2 False
661183 9242382 2 1 2015-07-08 00:00:00.000 O_2 False
661186 9242382 1 1 2015-07-08 00:00:00.000 O_2 False
661178 9242382 2 1 2015-07-10 00:00:00.000 O_2 False
661185 9242382 2 1 2015-07-10 00:00:00.000 O_2 False
The result I want is the unique rows from columns:
PupilPersonId, EducationTypeId,VehicleTypeId AND there MAX EducationDate
SELECT er1.* FROM EducationResult er1
INNER JOIN
(
SELECT
er.PupilPersonId, er.EducationTypeId, er.VehicleTypeId, MAX(er.EducationDate) as EducationDate
[Code] ....
I like to know is there another approach with CTE and or Cross Apply I can use instead?
I have an issue where i am mandated to enforce RI on an applications database (a good thing). but I have several common lookup tables where many of the "codes" reside for many different code types. I also have the mandate that i cannot change the underlying DDL to make composite keys to match the codes table PK. I am currently looking at creating indexed views on top of the Codes table to seperate the logical tables it contains. This is several hundred views.
I do know that I do not want to write several hundred triggers to enforce RI. Table schema below, the CdValue column is the column that is used throughout the hundreds of tables that use this codes table, and their corresponding column is not named the same.
CREATE TABLE dbo.CodesTable (
PartyGrpId INT NOT NULL
, CdTyp VARCHAR ( 8 ) NOT NULL
, CompId INT NOT NULL
, CdValue VARCHAR ( 8 ) NOT NULL
, CdValueDesc VARCHAR ( 255 ) NULL
, AltValueDesc VARCHAR ( 100 ) NULL
[Code] ....
I did though run into one forum where a person brought up a great idea. Filtered Foreign Keys, what a novel concept, if it could work it would make so much less code to fix an issue like this.
ALTER TABLE dbo.BusinessStatus WITH NOCHECK
ADD CONSTRAINT FK_dbo_BusinessStatus_CodesTable FOREIGN KEY (LoanStsDtCd) REFERENCES dbo.CodesTable (CdValue) WHERE CdTyp = 'Status'
I have a non-partitioned table (TableToPartition) and I want to apply an existing partition scheme (PartSch) to it using a query. I didn't find any option so I used the StorageCreate Partition wizard to generate the script.why this clustering magic needed if it is dropped at the end? Isn't there another way without indexing to partition a table, say something with ALTER TABLE? (SQL Server 2012)
BEGIN TRANSACTION
CREATE CLUSTERED INDEX [ClusteredIndex_on_PartSch_635694324610495157] ON [dbo].[TableToPartition]
(
[ID]
)WITH (SORT_IN_TEMPDB = OFF, DROP_EXISTING = OFF, ONLINE = OFF) ON [PartSch]([ID])
DROP INDEX [ClusteredIndex_on_PartSch_635694324610495157] ON [dbo].[TableToPartition]
COMMIT TRANSACTION
create table target
(Taid int, studenid int, std int,div int,year int ,ActivityId int)
insert into target values(1,1,1,2015,1),
(1,1,1,2015,2),(1,1,1,2015,3),(1,1,2,2015,1)
,(1,1,2,2015,4) ,(1,1,2,2015,3);
create table activity(ActivityId int,Activity nvarchar)
insert into activity values (1,'sport')
,(2,'swim')
,(3,'read')
,(4,'dace');
I want to edit(update,delete,insert) target table activity from front end for that I took grid view and that grid all activity come of single student studenid(unique key for each student) that you see design below like this
that activity present in target table that come as check in check and that activity not select student from activity activity table that come unchecked
I want to update above information means unchecked alredy check data should delete and new check data add , already check data update
I have use merge statement but problem is that at single time only one row execute that is check because data come from data gridview.
I am in assumption that we cannot do NULL value comparison in where clause directly (results will not be proper) we have to use ISNULL. Is my understanding correct? Is using ISNULL efficient when we have to this operation for large volume?
View 5 Replies View RelatedI have a table called names (firstname, lastname, number) then i have a DECLARED variable called @displaynum...If @displaynum id true my select query should select the number column. if the variable is false , only the first two columns are selected.
e.g @displaynum = true
@displaynum = false
Firstname | Lastname | number Firstname | Lastnam
blah | blah | 12345
blah | blah
i am not sure if this is possible as a case still selects the column but just changes the values.
How can I update only one row doing an update query?
For example:
update from table1
set category = 'C'
where country = 'Brazil'
One want to update only one row with country = 'brazil'
I have table with filed
EmpProject -Table
Empno, Name, Project NO, cost center
I need to restrict the results by project No by user input. In case if user did not provide any value for the projectNO, then need to fetch all rows.
Select empno, name, projecno, cost_center from empproject where projectno=nvl(:pno, :deptno)
I have a question about SQL Server.
Table patient:
create table patient (pn int,code int,date date,doctorcode int)
insert into patient (pn,code,date,doctorcode)
values
(1,10,'2015-02-19','100),
(1,10,'2015-02-19','101),
(1,10,'2015-02-19','102),
[Code] ...
Table Patientref:
create table patientref
(pn int,code int, sdate date,edate date,status int)
insert into patientref(pn,code,sdate,edate,status)
values
(1,10,'2015-02-13','2015-02-19',1),
(1,10,'2015-02-19','2015-03-24',2),
[Code] ...
Here we need consider patient dates that fall between sdate and edate of the patientrefs table, and then we need to consider the highest status values in order (for example, the highest values in order - 2 is first highest, 4 is second highest, 3 is third highest, and 1 is fourth highest value)
If the date falls between multiple different sdate and edate with the same status values, then we need to consider the latest sdate value and from that entire record we need to extract that value.
Examples: patient
pn | code | date | doctorcode
2 | 10 |2015-02-12 | 101
2 | 10 |2015-02-13 | 102
2 | 10 |2015-02-14 | 103
Table : Patientref:
pn | code | sdate | edate | Status
2 | 10 |2015-02-08 | 2015-02-19 | 4
2 | 10 |2015-02-09 | 2015-02-19 | 2
2 | 10 |2015-02-10 | 2015-02-19 | 2
2 | 10 |2015-02-11 | 2015-02-18 | 1
Here, pn=2 values have dates which fall between sdate and edate of patientref table. Then we give highest values status is 2, and status 2 values have two records, then we go for max sdate(latest sdate). Then this pn=2 latest sdates is 2015-02-10 and we need to retrieve the corresponding edate and status values.
pn = 4donot have sdate and edate and status values dut not fall conditon
Based on this, the desired output is below:
pn | code | date | doctorcode | sdate |edate |status
1 | 10 |2015-02-19 | 100 |2015-02-19 |2015-03-24 | 2
1 | 10 |2015-02-19 | 101 |2015-02-19 |2015-03-24 | 2
1 | 10 |2015-02-19 | 102 |2015-02-19 |2015-03-24 | 2
2 | 10 |2015-02-12 | 101 |2015-02-10 |2015-02-19 | 2
[Code] ...
I tried it like this:
select p.pn,p.code,p.[date],p.doctorcode,pr.sdate,pr.edate,pr.[status] from patient p
outer apply (select top 1 pr.pn,pr.code,pr.sdate,pr.edate,pr.[status] from patientref pr
where pr.pn=p.pn and pr.code=p.code and p.date between pr.sdate and pr.edate
order by case when pr.status=2
then 1 when pr.status=4 then 2
when pr.status=3 then 3
when pr.status=1 then 4 end ,pr.sdate
)pr
but this query not given expected result.here when dos not fall between sdate and edate that records not given in the above query. I required that records also.if not fall b/w condition then we need retrive that records empty values for that records.
I have an existing store proc with insert and update statements, I want to add a condition at the top of the proc with conditions like;
declare @dayofweek int
set datefirst 1
select @dayofweek = datepart(dw,getdate())
--select @dayofweek
if @dayofweek = 1
[Code] ...
If the condition meets with either of the above 2 conditions, than have to run the actual store proc.
My actual Storeproc in which I need to incorp the above conditions is:
CREATE PROCEDURE [dbo].[Load_Product]
@FileDate date = NULL
AS
BEGIN
DECLARE @EventText varchar(500),
@Rows int = 0,
@RowsTotal int = 0,
[Code] .....
I am using SQL Server 2008.Each stock item will have default 4 document type (1, 5, 6, 7) and each will have 3 zone's (1, 2, 3) to qualify. Each zone will be updated to 1 for that document type if the item successfully pass through it. If all zone are NULL means no transaction. How to retrieve only the failed rows which means not all zone are 1 or NULL.In the image GJ-00064 has one row failed. So how to get the count of failed rows for each item
Expected result:
Uniid <-> Stockcode <-> FailedRows
1670 <-> GJ-00064 <-> 1
I am using SQL 2005. I have some data from an old application that did not follow the rules for normalization. The table is for Invoices, and the table allows for 13 purchase items per record. So in each row of my table I have a non-unique integer field itemID, itemID1, itemID2 ... itemID12. For each itemID I also have "lbs_total" and "line_total" (which is price * lbs_total) - so itemID, lbs_total, line_total ... itemID1, lbs_total1, line_total1 ... etc. It's a mess, I know.Each row has a unique Customer Number ("cno") and an Invoice Date ("inv_date"). My proc needs to allow for params for the item number, and a start date and end date for BETWEEN on the inv_date.I also need to get the aggregate for the lbs_total and the line_total.
View 15 Replies View Relatedbelow is my original query
select Value = count(*) from dbo.test
I have 20 rows in dbo.test so i will get 20 as my output, now i need to write a case statement here such that when count(*) = 0 then it should display text filed 'NO Data' else it should display the count.
I want to calculate year to month data for month wise . Ihave start range and end range table like below
Start range and end range table
Start dateEnd date
01-04-201401-11-2014
01-04-201401-12-2014
01-04-201401-01-2015
01-04-201401-02-2015
[Code] ....
Then I want to pass this value one by one in below table for get value month wise
Main table
Branchamountperiod
Branch110201103
Branch22201104
Branch33201401
Branch44201402
Branch58201403
Branch610201404
[Code] ....
The below query is for november month: (Apr to Nov)
select * from maintable
where period between '01-04-2014' and '01-11-2014'
then for December month : (Apr to Dec)
So I want to pass second row
select * from maintable
where period between '01-04-2014' and '01-12-2014'
.....
....
select * from maintable
where period between '01-04-2015' and '01-12-2015'
Like wise I want to get month wise data of YTM data.
My expected output is
201411
201412
201501
201502
201503
201504
201505
[Code] ....
I need to write a query on a table..
table defination .. table Client_Master
file_id int identity(1,1) primary key
, client_id int
,LOAN_SANCTION_DATE datetime
,is_reject bit
has Data ..
FILE_ID CLIENT_ID
LOAN_SANCTION_DATE IS_REJECT
21139 22784
2014-02-03 00:00:00.000 0
21141 22784
2014-02-03 00:00:00.000 NULL
20869 22784
2014-02-03 00:00:00.000 1
20870 22784
2014-02-03 00:00:00.000 0
21571 22784
2014-02-03 00:00:00.000 1
66056 22784
2014-02-03 00:00:00.000 1
Above has 6 files entries for client id 22784 and LOAN_SANCTION_DATE 2014-02-03 out of which 3 are rejected ..
Now , i want to write a query to select those distinct client_id , LOAN_SANCTION_DATE from Client_Master where all files has been rejected ..
means by grouping client ID and LOAN_SANCTION_DATE all the files are rejected ..
I have wrote as below .. got the result but not satisfy with the query
SELECT DISTINCT CLIENT_ID,LOAN_SANCTION_DATE,COUNT(FILE_ID) AS No_Of_Files
,COUNT(DISTINCT CASE WHEN IS_REJECT=1 THEN FILE_ID END )AS No_Of_Rejected
FROM dbo.FILE_MASTER
GROUP BY CLIENT_ID ,LOAN_SANCTION_DATE
HAVING
COUNT(FILE_ID)=COUNT(DISTINCT CASE WHEN IS_REJECT=1 THEN FILE_ID END )
I've two audit tables, AUDIT_ORDERS and AUDIT_ORDER_LINES.
The AUDIT_ORDERS has these columns: AUDIT_ID, ORDER_ID, AUDIT_DATE and other ones.
The AUDIT_ORDER_LINES has these columns: AUDIT_ID, ORDER_ID, ORDER_LINE_ID, AUDIT_DATE and other ones.
I need to join these two tables in order to select for each order line row the first order having the related audit date lower than or equal to the audit date of the related order line.
I don't want to use the TOP 1 clause or a subquery. I think to complete a such statement:
SELECT OL.Order_Line_ID, O.Order_ID, OL.Audit_Date, O.Audit_Date
FROM AUDIT_ORDER_LINES as OL INNER JOIN AUDIT_ORDERS as O
on OL.Order_ID = O.Order_ID and O.Audit_Date <= OL.Audit_Date ...
I'd like to get the first row of the Audit_Orders with audit_date <= of the audit_date of the Audit_Order_Lines table by using the join clause.
I have a query where i would calculate the counts of three Servers
declare @Managed float
declare @Active float
DECLARE @Values varchar(1000)
SET @Values = 'WE,EE,CO'
select @Managed = count(Name0) from v_R_System where Operating_System_Name_and0 like '%Workstation%'
[Code] ...
Here i need output like below
Workgroup Managed Active
'WE' 255 ,400
'EE' 300 ,450
'CO' 155, 600
So how to use these three values in the where condition when i use the where clause i have put in condition it will give me the subquery returns more than one value,so how should i use this scenario to accomplish this output?
I have a Stored Procedure, wherein I need to use a while loop. essentially the loop looks like this.
Set @Kount = 1
--TestScript
Select 'TempReqTable', * from @TempReq
WHILE Exists(Select * from @TempReq WHERE TempID = @Kount)
BEGIN
--Do stuff with values from table
Set @Kount += 1
END
The test script confirms that there is only one row in the @TempReq table. However the loop never stops running and @Kount keeps being incremented and incremented until I manually stop the execution of the SP.
Is there some rule that I am not aware of that does not allow the use of an Exists statement in the condition of a While loop?
How do I get the below scenario:
EmpID DepID
12 2
17 3
17 2
13 3
Every Employee should be in Department 2 and 3 (as example EmpID = 17 has DepID 2 and 3 from above table). But when any of the employees either exists only in any one department (as EmpID = 12 has only DepID = 2), then a new row should be added to the table for that employee with that missing DepID.
Desired Output:
EmpID DepID
12 2
17 3
17 2
13 3
12 3
13 2
Hi... I'm reading the MS Press 70-442 Self-Paced Training kit, and I'm having problems with this example.
I'd like help getting it to work correctly, or understand why it is isn't working the way I planned.
On page 67, the lab is about the APPLY operator (CROSS APPLY and OUTER APPLY). I first have to input a sample table-valued function into the AdventureWorks database:
Code Block
CREATE FUNCTION fnGetAvgCost(@ProdID int)
RETURNS @RetTable TABLE (AvgCost money)
AS
BEGIN
WITH Product(stdcost)
AS
(
SELECT avg(standardcost) as AvgCost
FROM Production.ProductCostHistory
WHERE ProductID = @ProdID
)
INSERT INTO @RetTable
SELECT * FROM Product
RETURN
END
and then run a sample T-SQL statement
Code Block
SELECT p.Name, p.ProductNumber,
Convert(varchar, cost.AvgCost,1) AS 'Average Cost'
FROM Production.Product p
CROSS APPLY fnGetAvgCost(p.ProductID) AS cost
WHERE cost.AvgCost IS NOT NULL
ORDER BY cost.AvgCost desc
My problem is with the WHERE clause... According to page 56, CROSS APPLY returns only rows from the outer table that produces a result set, so why do I need to explicitly filter NULL values?
When I remove the WHERE clause, the query retrieves lots of NULL AvgCost values.
Again, according to page 56, it is the OUTER APPLY that returns all rows that return a result set and will include NULL values in the columns that are returned from the table-valued function.
So, in short, I don't see the difference between CROSS APPLY and OUTER APPLY, using this example, when I remove the WHERE clause?
(Please refrain from introducing another example into this question.)
I have customers named Alex (Cid=1), Bob (Cid=2), and Carrie (Cid=3) in a table customer.
Cid
First_Name
1
Alex
2
Bob
3
Carrie
I have products name Gin (Pid=1), Scotch (Pid=2) and Vodka (Pid=3) in a table products.
Pid
Product_Name
1
Gin
2
Scotch
3
Vodka
And I have a table that holds purchase called Customer_Purchases that contain the following records:
Cid
Pid
1
1
1
2
2
1
2
3
3
2
I would like to make a marketing list for all customers that purchased Gin or Scotch but exclude customers that purchased Vodka. The result I am looking for would return only 2 records: Cid’s 1 (Alex) and 3 (Carrie) but not 2 (because Bob bought Vodka).
I know how to make a SELECT DISTINCT statement but as soon as I include Pid=2 This clearly doesn’t work :
SELECT DISTINCT Pid, Cid
FROM
Customer_Purchases
WHERE (Cid = 1) OR
(Cid = 3) OR
(Cid <> 2)
I have a query that returns the data about test cases. Each test case can have multiple bugs associated to it. I would like a query that only returns the test cases that have all their associated bugs status = closed.For instance here is a sample of my data
TestCaseID TestCaseDescription BugID BugStatus
1 TestCase1 1 Closed
2 TestCase1 2 Open
3 TestCase2 11 Closed
4 TestCase2 12 Closed
5 TestCase2 13 Closed
How can I limit this to only return TestCase2 data since all of that test case's bugs have a status of closed.
what is difference between outer apply and outer join ,both return rows from left input as well as right input . isnt it?
View 3 Replies View RelatedI am using stored procedure to load gridview but problem is that i am not getting all rows from first table[ Subject] on applying conditions on second table[ Faculty_Subject table] ,as you can see below if i apply condition :-
Faculty_Subject.Class_Id=@Class_Id
Then i don't get all subjects from subject table, how this can be achieved.
Sql Code:-
GO
ALTER Proc [dbo].[SP_Get_Subjects_Faculty_Details]
@Class_Id int
AS BEGIN
[code] ....
For example..
select * from mytable where MyNum = 7
If this brings back more than 1 row, I want to display a message that says,
Print 'There is more than one row returned'
Else (If only 1 row returned), I don't want to print anything.
Can I do this? Thx!
Dear friends,
I'm having a problem... maybe it's very simple, but with soo many work, right now I can't think well...
I need to filter rows in a dataflow...
I created a condition spli to that... maybe there is a better solution...
And the condition is: Datex != NULL(DT_DATE)
(Some DATE != NULL)
[Eliminar Datex NULL [17090]] Error: The expression "Datex != NULL(DT_DATE)" on "output "Case 1" (17123)" evaluated to NULL, but the "component "Eliminar Datex NULL" (17090)" requires a Boolean results. Modify the error row disposition on the output to treat this result as False (Ignore Failure) or to redirect this row to the error output (Redirect Row). The expression results must be Boolean for a Conditional Split. A NULL expression result is an error.
What is wrong??
Regards,
Pedro
I am trying to write an visibility function to have message shown based on two different IIF conditions:
If behavior is to Add a customer ( if message =NAME ALREADY EXISTS, return " NAME ALREADY EXISTS", otherwize return " NAME CREATED")If behavior is to Delete a customer (( if message =NAME DOES NOT EXIST, return "NAME DOES NOT EXIST", otherwize return "NAME SUCCESSFULLY DELETED")
I tried the following which doesn't work:
=IIF((UCase(First(Fields!Message.Value, "DataSetName")) = "NAME ALREADY EXISTS"), "WARNING: NAME ALREADY EXIST", "NAME CREATED"),
IIF((UCase(First(Fields!Message.Value, "DataSetName")) = " NAME DOES NOT EXIST"), "WARNING: NAME DOES NOT EXIST", " NAME DELETED")
I have a sql server problem for which the solution is at,
http://support.microsoft.com/kb/889521
The article talks about a hot fix, but there is no link for download the hot fix.
Can anyone have a look and guide me.
Thanks
------------------------
I think, therefore I am - Rene Descartes
Hi
I am developing a scientific application (demographic forecasting) and have a situation where I need to update a variety of rows, say the ith, jth and kth row that meets a particular condition, say, x.
I also need to adjust rows, say mth and nth that meet condition , say y.
My current solution is laborious and has to be coded for each condition and has been set up below (If you select this entire piece of code it will create 2 databases, each with a table initialised to change the 2nd,4th,8th and 16th rows, with the first database ignoring the condition and with the second applying the change only to rows with 'type1=1' as the condition.)
This is an adequate solution, but if I want to change the second row meeting a second condition, say 'type1=2', I would need to have another WITH...SELECT...INNER JOIN...UPDATE and I'm sure this would be inefficient.
Would there possibly be a way to introduce a rank by type into the table, something like this added column which increments for each type:
ID
Int1
Type1
Ideal Rank by Type
1
1
1
1
2
1
1
2
3
2
1
3
4
3
1
4
5
5
1
5
6
8
2
1
7
13
1
6
8
21
1
7
9
34
1
8
10
55
2
2
11
89
1
9
12
144
1
10
13
233
1
11
14
377
1
12
15
610
1
13
16
987
2
3
17
1597
1
14
18
2584
1
15
19
4181
1
16
20
6765
1
17
The solution would then be a simple update based on an innerjoin reflecting the condition and rank by type...
I hope this posting is clear, albeit long.
Thanks in advance
Greg
PS The code:
USE
master
GO
CREATE DATABASE CertainRowsToChange
GO
USE CertainRowsToChange
GO
CREATE TABLE InitialisedValues
(
InitialisedValuesID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE PROCEDURE Initialise
AS
BEGIN
INSERT INTO InitialisedValues (Int1 )
SELECT 2
INSERT INTO InitialisedValues (Int1 )
SELECT 4
INSERT INTO InitialisedValues (Int1 )
SELECT 8
INSERT INTO InitialisedValues (Int1 )
SELECT 16
END
GO
EXEC Initialise
/*=======================================================*/
CREATE TABLE AllRows
(
AllRowsID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE TABLE RowsToChange
(
RowsToChangeID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE PROCEDURE InitialiseRowsToChange
AS
BEGIN
INSERT INTO RowsToChange (Int1 )
SELECT 2
INSERT INTO RowsToChange (Int1 )
SELECT 4
INSERT INTO RowsToChange (Int1 )
SELECT 8
INSERT INTO RowsToChange (Int1 )
SELECT 16
END
GO
EXEC InitialiseRowsToChange
GO
CREATE PROCEDURE PopulateAllRows
AS
BEGIN
INSERT INTO AllRows (Int1 )
SELECT 1
INSERT INTO AllRows (Int1 )
SELECT 1
INSERT INTO AllRows (Int1 )
SELECT 2
INSERT INTO AllRows (Int1 )
SELECT 3
INSERT INTO AllRows (Int1 )
SELECT 5
INSERT INTO AllRows (Int1 )
SELECT 8
INSERT INTO AllRows (Int1 )
SELECT 13
INSERT INTO AllRows (Int1 )
SELECT 21
INSERT INTO AllRows (Int1 )
SELECT 34
INSERT INTO AllRows (Int1 )
SELECT 55
INSERT INTO AllRows (Int1 )
SELECT 89
INSERT INTO AllRows (Int1 )
SELECT 144
INSERT INTO AllRows (Int1 )
SELECT 233
INSERT INTO AllRows (Int1 )
SELECT 377
INSERT INTO AllRows (Int1 )
SELECT 610
INSERT INTO AllRows (Int1 )
SELECT 987
INSERT INTO AllRows (Int1 )
SELECT 1597
INSERT INTO AllRows (Int1 )
SELECT 2584
INSERT INTO AllRows (Int1 )
SELECT 4181
INSERT INTO AllRows (Int1 )
SELECT 6765
END
GO
EXEC PopulateAllRows
GO
SELECT * FROM AllRows
GO
WITH Temp(OrigID)
AS
(
SELECT OrigID FROM
(SELECT Row_Number() OVER (ORDER BY AllRowsID Asc ) AS RowScore, AllRowsID AS OrigID, Int1 AS OrigValue FROM Allrows) AS FromTable
INNER JOIN
RowsToChange AS ToTable
ON FromTable.RowScore = ToTable.Int1
)
UPDATE AllRows
SET Int1=1000
FROM
Temp as InTable
JOIN Allrows as OutTable
ON Intable.OrigID = OutTable.AllRowsID
GO
SELECT * FROM AllRows
GO
USE
master
GO
CREATE DATABASE ComplexCertainRowsToChange
GO
USE ComplexCertainRowsToChange
GO
CREATE TABLE InitialisedValues
(
InitialisedValuesID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL
)
GO
CREATE PROCEDURE Initialise
AS
BEGIN
INSERT INTO InitialisedValues (Int1 )
SELECT 2
INSERT INTO InitialisedValues (Int1 )
SELECT 4
INSERT INTO InitialisedValues (Int1 )
SELECT 8
INSERT INTO InitialisedValues (Int1 )
SELECT 16
END
GO
EXEC Initialise
/*=======================================================*/
CREATE TABLE AllRows
(
AllRowsID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL,
Type1 int NOT NULL
)
GO
CREATE TABLE RowsToChange
(
RowsToChangeID int identity(1 ,1) NOT NULL PRIMARY KEY,
Int1 int NOT NULL,
Type1 int NOT NULL
)
GO
CREATE PROCEDURE InitialiseRowsToChange
AS
BEGIN
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 2, 1
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 4, 1
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 8, 1
INSERT INTO RowsToChange (Int1,Type1 )
SELECT 16, 1
END
GO
EXEC InitialiseRowsToChange
GO
CREATE PROCEDURE PopulateAllRows
AS
BEGIN
INSERT INTO AllRows (Int1, Type1 )
SELECT 1, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 1, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 2, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 3, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 5, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 8, 2
INSERT INTO AllRows (Int1, Type1 )
SELECT 13, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 21, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 34, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 55, 2
INSERT INTO AllRows (Int1, Type1 )
SELECT 89, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 144, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 233, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 377, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 610, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 987, 2
INSERT INTO AllRows (Int1, Type1 )
SELECT 1597, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 2584, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 4181, 1
INSERT INTO AllRows (Int1, Type1 )
SELECT 6765, 1
END
GO
EXEC PopulateAllRows
GO
SELECT * FROM AllRows
GO
WITH Temp(OrigID)
AS
(
SELECT OrigID FROM
(SELECT Row_Number() OVER (ORDER BY AllRowsID Asc ) AS RowScore, AllRowsID AS OrigID, Int1 AS OrigValue FROM Allrows WHERE Type1=1) AS FromTable
INNER JOIN
RowsToChange AS ToTable
ON FromTable.RowScore = ToTable.Int1
)
UPDATE AllRows
SET Int1=1000
FROM
Temp as InTable
JOIN Allrows as OutTable
ON Intable.OrigID = OutTable.AllRowsID
GO
SELECT * FROM AllRows
GO
I am using SETROWCOUNT 10 in my stored procedure. At end of thi sp I use SETROWCOUNT 0.
Will all other sp's that are executing at the same time as the above sp, get affected by the above SETROWCOUNT statement?
I have a table called Courses with columns "courseCode" "courseName" and "TeacherName"Im passing in a value @prefixText ...I have the following...Select courseModuleCode from courses Where courseModuleCode like @prefixTextwhat I actually want to do is return one list, i.e. one column that will do the same for "courseName" and "TeacherName" aswell based on what the @prefix tag is...so i will end up with one column that may contains some or all of the following courseModuleCode, courseName, TeacherName. Im basically implementing a search on this table and want the users to search by any of the column nameshope this makes sense.
View 6 Replies View Related