Transact SQL :: How To Query A Table With Hidden Values
Aug 31, 2015
I have a table called USERS, some of its records are marked as hiddenRcord, I want to load those records in a custom page in my asp.net webpage with paging enabled, each page contains 10 records.
I use the statement "SELECT Top 10 tableID,userName FROM USERS WHERE (hiddenRecord=0 AND tableID>@tableID)"
The pagination has 5 links (First,2,3,4,Last), I can of course put the last tableID in link number 2, but I don't know how to do it for the links (3,4,Last).
View 3 Replies
ADVERTISEMENT
Apr 26, 2015
I have two tables A(uname,address,full_name) and B(uname,full_name). I want to update table A for all matching case of uname in table B.
View 5 Replies
View Related
Aug 4, 2015
I am looking for a Sql query to verify the inserted values from one table(in CSV file) with another table(in sql database)
For example: I have below Values column that is present in once CSV file, after my data migration the values get stored in Results table under Message column.
I need to very whether values(1X,1Y) are inserted in Message record "successfully inserted value 1X"
Values (CSV)
1X
1Y
Results Table(SQL)
CreatedDate Message
2015-08-04 08:45:29.203 successfully inserted value 1X
2015-08-04 08:44:29.103 TEst pass
2015-08-04 08:43:29.103 successfully inserted value 1X
2015-08-04 08:42:29.203 test point
2015-08-04 08:35:29.203 successfully inserted value 1Y
2015-08-04 08:30:29.203 Test Pass
2015-08-04 08:28:29.203 successfully inserted value 1Y
If all values are inserted:
Output:
All values from values table are inserted successfully
Total count of values inserted: 2
If only few values are inserted, example only 1X from Values table is inserted in Message
Example:
Results Table CreatedDate Message
2015-08-04 08:45:29.203 successfully inserted value 1X
2015-08-04 08:44:29.103 TEst pass
2015-08-04 08:43:29.103 successfully inserted value 1X
2015-08-04 08:42:29.203 test point
Output:
All values from values are not inserted successfully in result table.
Total count of values inserted: 1
Missing Values not inserted in results table are: 1Y
View 3 Replies
View Related
Jun 23, 2015
I have a table like this:
ID Order Date .....
1 Bla 2015-01-13 12:00:45.2713558 .
2 Mio 2015-01-13 12:05:45.2713558 .
3 Tala 2015-01-13 14:00:45.2713558 .
4 Bla 2015-01-13 15:00:45.2713558 .
5 Mio 2015-01-13 20:00:45.2713558 .
6 Bla 2015-01-15 17:00:45.2713558 .
7 Bla 2015-01-15 19:00:45.2713558 .
[code]...
I tryed several things with CASE, IF, EXISTS,... but I had no success.
View 13 Replies
View Related
Aug 20, 2015
Given a model in Power Pivot with a number of KPIs that are hidden with the 'hide from client tools' option. After restoring the model in SSAS and connecting to the model from Excel, the KPIs are visible under a separate category/table "KPIs".
Other hidden items in the model like columns and measures remain invisible.
Is this normal behavior and what can I do about this?
View 2 Replies
View Related
Jul 30, 2015
I'm trying to find it difficult to use recursice CTEs or better solution for a special request below. There are two tables 1) @sizes serves as a lookup or reference for right drive and 2) @test is sample data with different sizes. Assume that I want to evenly distribute the drive letters from table1 to table2 by checking the size available.
E.g.: for the first record in @test; id = 1 where the size is 50 and it fits in Y: drive -- left over space in Y: = 50
id=2, size 2.5, space available from left over = 50 - 2.5 = 47.5 which again fits into Y:
id = 3, size 51, cannot in fit in Y: drive as there is enough space in Y: to allocate (51 > 47.5)
so pick the next drive check on availability again
DECLARE @sizes TABLE (id TINYINT, size DECIMAL(5,2), drive VARCHAR(3))
INSERT INTO @Sizes
SELECT 1,100.00,'Y:'
UNION ALL
SELECT 2,80.85,'Z:'
[Code] ....
-- My output should look like
col1 , val , path
A 50 Y:
B 2.5 Y:
C 51 Z:
D 2.6 Y:
E 52 Z:
F 2.7 Y:
View 5 Replies
View Related
Jun 17, 2015
I have a query where i would calculate the counts of three Servers
declare @Managed float
declare @Active float
DECLARE @Values varchar(1000)
SET @Values = 'WE,EE,CO'
select @Managed = count(Name0) from v_R_System where Operating_System_Name_and0 like '%Workstation%'
[Code] ...
Here i need output like below
Workgroup Managed Active
'WE' 255 ,400
'EE' 300 ,450
'CO' 155, 600
So how to use these three values in the where condition when i use the where clause i have put in condition it will give me the subquery returns more than one value,so how should i use this scenario to accomplish this output?
View 3 Replies
View Related
Sep 17, 2015
I am trying to insert values from a temp table #TableName to a db table.
CATEGORY table- CategoryId, CategoryName, CategoryDescription
Then I did this :
Select CategoryName
into #TableName
from CATEGORY
Now I'm doing this :
Insert into #TestTable values(1,'This is:'+CategoryName)
select CategoryName from #Test
CategoryID right now is not PK.
So, the intention is to insert as many CategoryNames available into TestTable with id 1 and category name edited as shown in Inset statement.
What is wrong with this query. Its not working.
View 12 Replies
View Related
Jun 2, 2015
I have a table (can't change the schema of it since it is part of an off the shelf app ) that has columns for individuals which I need to extract several pieces of information, essentially Phone, Email Address, etc. See U1 - U6
What is a better way to return this information rather than multiple joins?
Select
[AccountNumber]
,a.[AccountId]
,[Name]
,[new_LocationID]
,[ws_name]
,[new_BillingManageruserName]
,[new_AreaServiceManName]
[Code] ....
View 3 Replies
View Related
Sep 10, 2015
I am a newbie to Sql server and i am having a task where my current table with always two rows existing and ID column as primary key looks like below:
ID PlateNo Type Image Name
27 455 User img1.jpg
32 542 Alternative img2.jpg
And i want a sql query to modify my table so that the data should be like as shown below:
ID PlateNo Type Image Name
27 542 Alternative img2.jpg
32 455 User img1.jpg
View 8 Replies
View Related
Jul 10, 2015
DECLARE @Query varchar(8000)
Create Table
#tempCountRichard (Status varchar(50), Number Varchar(1000)
Set @Query = 'Insert Into #tempCountRichard
Select Count(Status),
[code]...
With the following SQL. When I select from the temp table I return the right count but my second column doesn't return anything.
Count Status
1010 2000
1111 2222
When I run the query that is being inserted into the the temp table I return the correct results
Count Status
1010 Pass
2000 Pass with Obs
1111 Fail
2222 None
how to select the data from the temp table exactly the same way it was inserted. As I need to select the exact same data from the insert.
View 23 Replies
View Related
Aug 18, 2015
I am using stored procedure to load gridview,i want to show row specific values in coloumns , as i an working on daily timetable of college and There are three tables Week_Day,Daily_Timetable & Subject.Daily_Timetable has data which has week_day,class_id,Subject_id,Period_No.
Each day has 6 periods and each period is mapped with subject in daily timetable.From below sql i am getting 6 rows of monday.
But i want to show in a row weekname,period1_subject_id(Period_No=1),period2_subject_id(Period_No=2),period3_subject_id.......upto
period6_subject_id.
Please see my query below:-
SELECT Week_Day.Week_Day_name, Subject.Subject_Code, Daily_Timetable.Period_No
FROM Week_Day LEFT JOIN
Daily_Timetable ON Week_Day.Week_Day_Id = Daily_Timetable.Week_Day_Id and Daily_Timetable.Class_Id=6 LEFT JOIN
Subject ON Daily_Timetable.Subject_Id = Subject.Subject_Id order by Week_Day.Week_Day_Id ,Daily_Timetable.Period_No
View 4 Replies
View Related
Sep 1, 2015
I have the following report I need to create with 2 parameters. An equal OR not equal. I need the report to have a drop down that has equal to '1024' or a drop down option that IS NOT equal to '1024'. I also need the WHERE clause to return the equal or not equal based on the user selection inside of SSRS.
SELECT user1 AS [Company], reference AS [PAI_REF], statenumber,
LEFT(user4, 7) AS [Supplier Code],
user4 AS [Company Information],
user8 AS [Transaction Type], user2 AS[Invoice Number],
--CONVERT(VARCHAR,CONVERT(Date, user3, 103),101) AS [Invoice Date],
[routeName] AS [Route], username AS [User Name]
[Code] ....
View 2 Replies
View Related
Sep 17, 2015
I am using a table to store different size numbers for example:
Look at the picture below:
But I want this type of output look at the picture below:
How to sort the query to return greater than zero values to sort up and zeros go down.
I am using sql server 2008.
View 14 Replies
View Related
Jul 7, 2015
There is a multi value parameter called "include" in the report where "Allow Multiple Values" is checked and it has 4 Available values as shown in the attached screen shots and preview of the report is also shown .There is no data set for this parameter and the values will get displayed on the report based on the visibility condition set in the report.Example : If first value is selected then 1 is passed and based on the visibility condition set in the report - the report output is displayed.None is default value and has value 4 and when the report is run with this option i.e. "None" then rest three parameter values are not applicable .
Requirement :
-When the end user selects (Select All) Check box then (None)
-check box must be disabled or must not appear for selection for the end user
-When the end user selects check boxes either of the first three except None then also None check box must be disabled or must not appear for -selection for the end user
-when the end user selects a combination of first three then also None check box must be disabled or must not appear for selection for the end user
-The None is set as default with a value as 4 and is applicable only when the user does not select either of the first three values and the report will run.
View 3 Replies
View Related
Apr 26, 2015
Simple table created but unable to insert values into it due to the above error
CREATE TABLE Ingredient(
ingredientCode CHAR(10)
PRIMARY KEY NOT NULL,
name VARCHAR(20),
ingreType VARCHAR(20),
[Code] .....
--always received this error: Conversion failed when converting date and/or time from character string
View 6 Replies
View Related
Aug 7, 2015
I would like to compare values in the same table and get the single record with different values in the multiple columns.For table tab1, ID is my key column. If type1 is active (A) then i need to update X else blank on Code1 column and if type2 is active (A) then i need to update X else blank on code2 column. Both type1 and type2 comes from same table for same ID..Below is the example to understand my scenario clearly....
declare @tab1 table (ID varchar(20), dt date, status varchar(1), type varchar(10))
insert into @tab1 values ('55A', '2015-07-30', 'A', 'type1')
insert into @tab1 values ('55A', '2015-07-30', 'C', 'type2')
insert into @tab1 values ('55B', '2015-07-30', 'C', 'type1')
insert into @tab1 values ('55B', '2015-07-30', 'A', 'type2')
[code]....
View 4 Replies
View Related
Aug 21, 2015
I have 3 variables that gets comma separated values. My requirement is to get them into a temporary table with 3 columns and each column should have single value. E.g. if
Declare @SID varchar(max),@CID VARCHAR(MAX),@KID VARCHAR(MAX)
Set @SID='1,2,3,4'
Set @CID='6,7,8,9'
Set @KID='A,BB,CCC,DDDD'
--Now my requirement is to get them in a temp table with 3 column and different rows as per comma separated values in variables.
Now my requirement is to get them in a temp table with 3 columns and different rows (as per number of comma separated values in variables) E.g.
16A
27BB
38CCC
49DDDD
How i can use them for joining with other tables.
View 5 Replies
View Related
Jul 22, 2015
I have one of the sample values in my table. I need to convert below value to Decimal(18,5)
DECLARE @i
VARCHAR
SET @i
= '0.9'
Output i m looking for is 0.90000
View 16 Replies
View Related
Oct 14, 2015
I need write a query for removing duplicates, for Example in my table I have columns
A_ID name id
1 sam 10
2 sam 10
3 sam 10
4 sam 10
5 ccc 15
6 ccc 15
7 ccc 15
8 fff 20
9 fff 20
10 fff 20
So now I have duplicates values in id column so now I need to take only one value of each and delete the remaining. I need to take first id value 10,15,20 so only 3 rows should be there in my table.
View 4 Replies
View Related
Oct 27, 2015
I'm trying to Update a column table based on values from another table but I need these values are random.My query looks like this and doesn´t work
DECLARE @Rowini int,
DECLARE @lastrow int
SET @Rowini = 1
SET @Lastrow = 80000
[code]...
View 8 Replies
View Related
Jul 18, 2015
I am trying to insert different number of columns into variables. This is what it does If I use a static columns.
declare @AccountType nvarchar(10)
declare @Total numerical(15,2)
declare @1 numerical (15,2)
declare @2 numerical (15,2)
declare @3 numerical (15,2)
#MonthtoDate temp table is created using a dynamic pivot query.
Data looks like this :
Account Type 1 2
3 Total
Type 1 3
0 4 7
Type 2 5
7 1 13
Select @AccountType = AcctType , @Total = MonthToDate, @1 = [1], @2 = [2], @3 = [3] from #MonthtoDate
However the issue is with [1],[2],[3] columns. Those are the number of days of the month. If today is the 3rd day of the month, we only need to show 3 days. So the final table has column [1],[2],[3] and @AccountType and @Total .
We want to run this query everyday to get the moth to date values.If we run this tomorrow, it will have 4 date columns [1], [2],[3],[4] and @AccountType and @Total .
View 6 Replies
View Related
May 12, 2015
I've to write a function to return a comma delimited values from a table columns
If a table has Tab1 ( Col1,Col2,Col3).
E.g. as below ( the columnName content I want to use as columns for my pivot table
CREATE FUNCTION [RPT].[GetListOfCol]
(
@vCat NVARCHAR(4000)
)
RETURNS @PList
AS
BEGIN
SELECT @PList += N', [' + [ColumnName] +']'
FROM [ETL].[TableDef]
WHERE [IsActive] = 1
AND [Category] = @vCat
RETURN;
END;
I want out put to be as below, I am getting this output from the select query independently by declaring @Plist variable and passing @vcat value, now I want it to be returned from a function when called from a select query output ,Colum1,column2,....
View 13 Replies
View Related
Sep 15, 2015
I have two tables (i.e. Table1 and Table2).
SELECT
* FROM [dbo].[Table1]
Date
id
9/15/2015
[code]...
Table2 has three columns (i.e. Date, Count and Rule Type). Column “Rule Type “has a default value which is “XYZ”..Now I want to insert Data from Table1 to Table2. I am using following query:-
declare @Startdate
datetime
DEclare @enddate
datetime
[code]...
Column name or number of supplied values does not match table definition.I am using SQL 2012. I understand Table1 has 2 Columns but Table2 has 3 Columns. Is there anyway, I can move data from source table to Destination table where Destination Table has more number of Columns?
View 2 Replies
View Related
Jun 29, 2015
I have tables and a function as representated by the code below. The names for objects here are just for representation and not the actual names of objects. Table RDTEST may have one or multiple values for RD for each PID. So the function GIVERD will return one or multiple values of RD for each value of PID passed to it.
When I run the following query, I get the required result except the rows for CID 500 for which PID is NULL in table T1. I want the rows for CID 500 as well with PID values as NULL.
SELECT A.CID,
A.ANI,
A.PID,
B.RD
FROM T1 AS A CROSS APPLY GIVERD(A.PID) B
CREATE TABLE [DBO].[RDTEST](
[PID] [INT] NULL,
[RD] [INT] NULL
)
[Code] ....
View 4 Replies
View Related
May 12, 2015
I have two tables, D and C, whose INTERSECT / EXCEPT values I'd like to insert in the following table I've created
CREATE TABLE DinCMatch (
servername varchar(50),
account_name varchar (50),
date_checked datetime DEFAULT getdate()
)
The following stmt won't work...
INSERT INTO DinCMatch
select servername, account_name from D
intersect
select servername, account_name from C
... as the number of supplied values does not match table definition.
View 2 Replies
View Related
Jul 5, 2007
I am working on a login system in flex and asp. I am encrypting the password before it is inserted it into the SQL database. But then when i do SELECT statement with username and encrypted password it returns 0 users found.
I outputted the sql statement and they passwords look excatly the same. But the SQL Select count(*) returns a 0.
link to the encrypting is used:
http://www.4guysfromrolla.com/webtech/110599-1.2.shtml
other information:
script language: asp + flex
database: sql server 2005
So i am thinking that their are hidden chars in the password. Is their a way to check this or even convert/exclude them ?
Any links or tips would be very helpfull
View 3 Replies
View Related
May 23, 2008
Hi all,
My report has a number of tables.
These table design is as [Total(numeric),Year(numeric),Month(varchar(15)].
Each table on report is populated based on individual tables in Mngt Studio.
My problem is.If table is empty,the table on report does not get populated/displayed.It is hidden.How do I return a message,Example {"No Value for table A"} instead and show the table in report only when the table has some value.
I have written an expression like this.But it just hides the table if its empty,and im not able to return a value "No Value"instead.
=IIF(Fields!Month.Value IS Nothing,"No Value for table A",False)
View 2 Replies
View Related
May 21, 2015
convert my table(like picture) to hierarchical structure in SQL. actually i want to make a table from my data in SQL for a TreeList control datasource in VB.net application directly.
ProjectID is 1st Parent
Type_1 is 2nd Parent
Type_2 is 3rd Parent
Type_3 is 4ed Parent
View 13 Replies
View Related
Aug 22, 2007
Hi. I have a rectangle in the page header which contains the report graphic and title. I use the rectangle's Propeties > Visibility tab > Expression, with the following code,
=IIF(Globals!PageNumber = 1, False, True)
However, on pages after page 1, the report table's height is the same as page 1 and it's positioned at the same spot as page 1 -- down about 2 inches from the top. How do I get the table's height to fill the page on pages after page 1?
Thank you.
View 3 Replies
View Related
Jul 22, 2015
I am trying to optimize a stored procedure in SQL 2008. When I look at an actual execution plan generated from when I run it in SSMS it shows a table being used in the plan that has no relation to what is actually in the query script and this is where the biggest performance hit occurs.
I've never seen a table show up before that wasn't part of the query. why this might occur and how to correct it? I can't just change the query script because the table in question isn't there.
View 10 Replies
View Related
Aug 30, 2000
My client want me to update a table and the view with a new column which should be hidden. I am kind of confused on how to go about this in order to get a good result. PLEASE HELP!!
View 1 Replies
View Related
Jun 7, 2012
I have a database that has 370 tables that match %_REF_% naming. All of these tables have a column call ds_name.
I need to get a list of all values of ds_name for each table.
View 3 Replies
View Related
