I need to select specific values from all rows where the value of a specific column is "Active"
This part works: SELECT LastName, FirstName, MiddleInit, ClientId FROM dbo.Client
But I want to add: WHERE StatusType = (Active) and how to do this.
i have table that has rows as below
DECLARE @Table TABLE
(minv_code INT,
alert_msg varchar(10),
alert_time Datetime)
[code]...
i want to select the data priority wise. the o/p should look likeÂ
e.g first row - 873939, 'Meter', '7/24/2015 3:31:22'
second row - 873939, 'Tamper', '7/24/2015 3:30:00'
third row - 873939, 'Reverse', '7/24/2015 3:31:18'
fourth row -873940, 'Tamper', '7/24/2015 3:31:22'Â
fifth row - 873940, 'Reverse', '7/24/2015 3:30:00'
Hi there !
Thanks for taking the time to read this thread.
I don't know whether anyone has this problem, but I am definitely not using the right keywords to search for a thread.
My situation is this...
I have a dataset that has values to fill cells to multiple tables in a report.
However, I only want to select specific data from the dataset to fill textboxes and others.
I cannot change the stored procedure, but the sample of the data is shown below:-
Row Stat Val
0 dtRpt1 02/01/2005
1 Value1 1
2 Value2 2000
3 dtMailSent 02/28/2005
4 Value3 0
5 Value4 5
6 Value5 658
I know it looks weird, but the row really represents which "row" or textbox is it to fill with the Val. The Stat Column is just a way to make sure that I am filling the right values.
so my new report would have multiple tables to denote different categories.
In my first table, I tried putting the cells as follows:-
(expressions are highlighted in italics and bold)
TextBox1 =IIF(Fields!Row.Value =0, Fields!Val.Value,"")
Table1
Column1
DetailRow1 =IIF(Fields!Row.Value =1, Fields!Val.Value,"")
DetailRow2 =IIF(Fields!Row.Value =2, Fields!Val.Value,"")
Table2
Column1
DetailRow1 =IIF(Fields!Row.Value =3, Fields!Val.Value,"")
DetailRow2 =IIF(Fields!Row.Value =4, Fields!Val.Value,"")
DetailRow3 =IIF(Fields!Row.Value =5, Fields!Val.Value,"")
DetailRow4 =IIF(Fields!Row.Value =6, Fields!Val.Value,"")
I only expect this report to print out one page holding the previous values.
However, it ended up printing like this
----------------------------------------------------------
Table1
Column1
DetailRow1 1
DetailRow2
Column1
DetailRow1
DetailRow2 2000
Table2
Column1
DetailRow1 02/28/2005
DetailRow2
DetailRow3
DetailRow4
Table2
Column1
DetailRow1
DetailRow2 0
DetailRow3
DetailRow4
Table2
Column1
DetailRow1
DetailRow2
DetailRow3 5
DetailRow4
Table2
Column1
DetailRow1
DetailRow2
DetailRow3
DetailRow4 658
------------------------------------------------------
I tried putting it into the headerrows instead of DetailRows, and it ended up printing the last value.
Is there anyway to do this ? print all the values out in one table ? I tried using textboxes, but I think I got my expression wrong.
Is this the correct expression ?
=IIF((Fields!Row.Value,"Dataset") =1, (Fields!Val.value, "Dataset"), "")
and it give me an error
The value expression for the textbox €˜textbox5€™ contains an error: [BC30455] Argument not specified for parameter 'FalsePart' of 'Public Function IIf(Expression As Boolean, TruePart As Object, FalsePart As Object) As Object'.
Appreciate any advice or suggestion for this scenario !
Thanks!
Bernard
I am trying to select all the data which are not associated with values older than a specific value.. For example I have:
paola -- 2
paola -- 3
paola -- 10
jessica -- 3
jessica -- 12
james -- 3
james -- 2
james -- 5
I want to query only those names, that are associated with numbers greater than 3. So, for this example, the result would be only Jessica. the others should be discarded.
I've a table that stores operationcode for each jobnumber. The jobnumber can have multiple operationcode. From the below DDL, I need to show all the jobs that have operation codes as 2001 and 2002. In the below DDL Jobnumber 80011 has both the operation codes 2001 and 2002 so this job will display on the report.
On the other hand Job 80021 only has operationcode 2001 and I do not want this job to show up on the report.
I need to show all the operationcodes for a job if it has operationcode 2001 and 2002.
USE tempdb;
GO
DECLARE @TEST_DATA TABLE
(
DT_ID INT IDENTITY(1,1) NOT NULL PRIMARY KEY CLUSTERED
, OperationCodeVARCHAR(10) NOT NULL
, EmployeeCode VARCHAR(10) NOT NULL
[Code] ....
I've the following data:
<Hour>11</Hour><Hour>12</Hour><Hour>15</Hour><Hour>18</Hour>
And my goals is to the extract the following example:
11,12, 15, 18
How Can I do That?
Hello,
What is the command to select rows between RowNum25 and RowNum30 in a Sql table?
Aditya
Hi Friends...
I have one table , suppose TableA which contains following columns..
I want to select records from this table where time difference is more than 2 min. (tec_insert_date) This means first record time and second one, then second one and third one..and so on..
How to select these records...pls give me some sql query...
thanks in advance
tec_number tec_insert_date tec_description
----------- ------------------------------------------------------ --------113909 2005-12-19 18:59:01.920 Description
113910 2005-12-19 18:59:02.043 Description
113911 2005-12-19 18:59:02.060 Description
113912 2005-12-19 18:59:02.060 Description
113913 2005-12-19 18:59:02.090 Description
113914 2005-12-19 18:59:02.090 Description
113915 2005-12-19 18:59:02.263 Description
113916 2005-12-19 18:59:02.437 Description
113917 2005-12-19 19:00:34.703 Description
113918 2005-12-19 19:00:34.720 Description
113919 2005-12-19 19:00:34.937 Description
113920 2005-12-19 19:00:35.607 Description
113921 2005-12-19 19:00:35.607 Description
113922 2005-12-19 19:00:35.840 Description
113923 2005-12-19 19:00:35.903 Description
113924 2005-12-19 19:00:36.200 Description
113925 2005-12-19 19:00:36.200 Description
113926 2005-12-19 19:00:36.217 Description
113927 2005-12-19 19:00:36.217 Description
113928 2005-12-19 19:00:36.217 Description
113929 2005-12-19 19:00:36.230 Description
113930 2005-12-19 19:00:36.230 Description
113931 2005-12-19 19:00:36.230 Description
113932 2005-12-19 19:00:36.230 Description
113933 2005-12-19 19:00:36.323 Description
113934 2005-12-19 19:00:36.450 Description
113935 2005-12-19 19:00:38.863 Description
113936 2005-12-19 19:00:38.943 Description
113937 2005-12-19 19:00:38.943 Description
113938 2005-12-19 19:00:39.100 Description
113939 2005-12-19 19:00:39.147 Description
113940 2005-12-19 19:00:39.300 Description
113941 2005-12-19 19:00:40.920 Description
113942 2005-12-19 19:01:23.363 Description
113943 2005-12-19 19:03:03.533 Description
113944 2005-12-19 19:03:08.197 Description
113945 2005-12-19 19:03:12.853 Description
113946 2005-12-19 19:03:14.087 Description
113947 2005-12-19 19:04:40.730 Description
113948 2005-12-19 19:04:44.843 Description
113949 2005-12-19 19:04:51.030 Description
113950 2005-12-19 19:04:56.313 Description
113951 2005-12-19 19:04:58.950 Description
113952 2005-12-19 19:09:19.950 Description
113953 2005-12-19 19:09:21.277 Description
113954 2005-12-19 19:09:21.340 Description
113955 2005-12-19 19:09:24.397 Description
113956 2005-12-19 19:09:35.660 Description
113957 2005-12-19 19:09:46.480 Description
113958 2005-12-19 19:09:47.790 Description
113959 2005-12-19 19:10:23.713 Description
113960 2005-12-19 19:10:23.980 Description
113961 2005-12-19 19:11:02.307 Description
113962 2005-12-19 19:11:52.040 Description
113963 2005-12-19 19:12:31.800 Description
113964 2005-12-19 19:12:31.940 Description
113965 2005-12-19 19:12:31.940 Description
113966 2005-12-19 19:13:10.500 Description
113967 2005-12-19 19:13:10.500 Description
113968 2005-12-19 19:13:50.697 Description
113969 2005-12-19 19:13:50.697 Description
113970 2005-12-19 19:13:50.743 Description
113971 2005-12-19 19:13:50.870 Description
113972 2005-12-19 19:13:50.883 Description
113973 2005-12-19 19:14:09.290 Description
113974 2005-12-19 19:14:47.680 Description
113975 2005-12-19 19:14:47.693 Description
113976 2005-12-19 19:14:48.630 Description
113977 2005-12-19 19:14:48.630 Description
113978 2005-12-19 19:14:49.127 Description
113979 2005-12-19 19:14:49.127 Description
113980 2005-12-19 19:14:49.160 Description
113981 2005-12-19 19:14:49.300 Description
113982 2005-12-19 19:14:49.313 Description
113983 2005-12-19 19:15:07.287 Description
113984 2005-12-19 19:15:07.783 Description
113985 2005-12-19 19:21:43.093 Description
113986 2005-12-19 19:22:01.920 Description
113987 2005-12-19 19:22:01.920 Description
113988 2005-12-19 19:22:20.780 Description
113989 2005-12-19 19:22:38.547 Description
113990 2005-12-19 19:22:38.547 Description
113991 2005-12-19 19:22:39.340 Description
113992 2005-12-19 19:22:39.340 Description
113993 2005-12-19 19:22:40.263 Description
113994 2005-12-19 19:22:41.010 Description
113995 2005-12-19 19:22:41.867 Description
I have table with below scheme
Year    Month    Day    RELH   Â
------ Â Â -------- Â Â Â ------ Â Â -------
1973 Â Â Â 4 Â Â Â Â Â Â 1 Â Â Â Â Â Â 50
...... etc
1973 Â Â Â 4 Â Â Â Â Â Â 30 Â Â Â Â Â 20Â
.....etc
1974 Â Â Â 5 Â Â Â Â Â Â 1 Â Â Â Â Â Â Â 50
....etc
1974 Â Â Â Â 5 Â Â Â Â Â Â 30 Â Â Â Â Â Â 99
I need to get years where average of RELH  of  months within year meetÂ
Month 4 Average(RELH) > 33 and
Month 5 Average(RELH) > 60 andÂ
Month 6 Average(RELH) < 33Â
How can I achieve this?
I am using stored procedure to load gridview,i want to show row specific values in coloumns , as i an working on daily timetable of college and There are three tables Week_Day,Daily_Timetable & Subject.Daily_Timetable has data which has week_day,class_id,Subject_id,Period_No.
Each day has 6 periods and each period is mapped with subject in daily timetable.From below sql i am getting 6 rows of monday.
But i want to show in a row weekname,period1_subject_id(Period_No=1),period2_subject_id(Period_No=2),period3_subject_id.......upto
period6_subject_id.
Please see my query below:-
SELECT Â Â Week_Day.Week_Day_name, Subject.Subject_Code, Â Daily_Timetable.Period_No
FROM Â Â Â Â Week_Day LEFT JOIN
           Daily_Timetable ON Week_Day.Week_Day_Id = Daily_Timetable.Week_Day_Id and Daily_Timetable.Class_Id=6  LEFT JOIN
           Subject ON Daily_Timetable.Subject_Id = Subject.Subject_Id order by  Week_Day.Week_Day_Id ,Daily_Timetable.Period_No
I am working on a multi-page datagrid that pulls data from a database. The issue I am running into is the SQL select query. What I have is a table to 55 items. What I need to do is grab the first 35 of those items and bind the resulting DataReader to the grid, print the page, then grab the remaining 20 items, bind to the grid and print the page.
I can use "SELECT TOP 35 FROM Table" to get the first 35 items, but I don't know how to get the remaining 20 items. Is there a way to say something like "SELECT TOP 20 FROM Table" but specify only the rows that begin after row 35?
I tried doing this with an ArrayList but couldn't bind it to the DataGrid.
Any suggestions?
Hi,
Im using a select statement to query out the data from a table.
ex:- select * from tblperson
Now this select statement is returning me 500 rows
I want to see only the records between 100 - 200 out of these 500 rows..
Anyone help
I have a very large table , and from that table I need just 2 records with column1 = 'A' and column1 = 'B' .
Here I don't think if I can not use OR or IN or Case operators because I need exactly 2 records not more.
I have a table that has for each shop a value that can change over time.For example
BK_POS 1 --> Segment A
BK_POS 1 --> Segment /
What I would like to achieve is to get all distinct Shops (BK_POS) from the table above, but if for that specific pos a row exists where the segment = "/" then I do not want to take this BK_POS in my select query.More concrete, the for example above I do not want to select BK_POS 1 because he has one row where the segment = "/".
Give this data set;
declare @BO table (Col1 varchar(50), Col2 varchar(50))
insert into @BO values
('01','009920140516102116'),
('071710811019600001000005',''),
('070534524264000001000005',''),
('001806505517000001000005',''),
[Code] ....
select * from @BO
The 2 digit number that appears on line 1, 7 and 13 (only in this example) i need to have added to the begin of each value below it until the next 2 digit number is encountered. The desired result set would look like:
declare @BOD table (Col1 varchar(50), Col2 varchar(50), col3 varchar(50))
insert into @BOD values
('01','009920140516102116',''),
('071710811019600001000005','','01071710811019600001000005'),
('070534524264000001000005','','01070534524264000001000005'),
[Code] ....
I have to extract a specific part of a string from a column in a sql server table. Following are the details and I have given the sample table and the sample strings.
I have 2 columns in my table [dbo].[StringExtract] (Id, MyString)
The row sample looks like the following
I have to extract the Id and a part of the column from mystring.
Id      MyString
1 Â Â Â Â Â ABC|^~&|BNAME|CLIENT1||CLIENT1|20110609233558||BIC^A27|5014589635|K|8.1|
ABC1|^~&|BNAME1|CLIENT1||CLIENT1|20110609233558||CTP^A27|5014589635|I|7.1|
DEF||5148956598||||Apprised|Bfunction1||15|LMP|^^^201106101330|
alloys3^ally^crimson^L||||alloys3^ally^crimson^L||||alloys3^ally^crimson^L|||||Apprised|
[Code] ....
The part I want to extract is in the line "ZZZ" and the string part that i want to extract is between the 5th and 6th pipes (|). So my output looks like the following
Id      DesiredString
1 Â Â Â Â Â Extracts^This^String1
2 Â Â Â Â Â Extracts^This^String2
3 Â Â Â Â Â Extracts^This^String3
Is there a way to extract this either using TSQL or SSIS.
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[StringExtract]') AND type in (N'U'))
DROP TABLE [dbo].[StringExtract]
GO
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[StringExtract]') AND type in (N'U'))
BEGIN
CREATE TABLE [dbo].[StringExtract](
[Id] [int] NULL,
[Code] ....
I have a DB with some tables and, on certain tables, i've a column named "ID_COMPUTER".
I need to find all the rows where id_computer=<specific_value> from all the tables of my database, when column "ID_COMPUTER" exists.
Pseudo-code would be: select * from db.* where id_computer=<specific_value>
how to write this ?
I have huge export files in a DB and i need to check if there are any datasets that have the same value in the first column, but a different in another one, via a query of course.
Like this:
ID IS NULL
1 1
2 1
3 0
1 0
The expected ID i get as a result of my query should be 1 in this case.
I need a trigger to know who and when a char(1) column is changed. Â Would like to write the audit trail to its own table I can query and record before and after values.
DDL:
CREATE TABLE [dbo].[Test](
[Customer] [varchar](12) NULL,
[Active] [char](1) NULL DEFAULT ('N') --Must use char 1 b/c more than 2 possible values
)
Insert into Test (Customer, Active) Values ('Acme','Y')..I want trigger to tell me whowhenwhere this value was changed. Â If using sql auth capture client windows id if possible and write to audit table Update Test set Active = 'N'
In SQL Server I can select a specific column in from of * like so:
Code:
select test_column_1,* from testtable1
I've been googling around and cannot seem to be able to find a definitive answer.
We have a "main" SQL 2014 server who imports XML files using SSIS in a datacenter. In remote sites (which are warehouses), there is an instance of SQL 2014 Express. A merge replication is setup, as every operations done on each site must be "forwared" to the main database, as some XML files are generated as output for an ERP system.
Now, the merge replication replicate all the data to the server on each sites. But a specific site don't need the data of every other sites, only the data relevant to itself (which is the warehouse code). Is there a way to replicate only the data relevant to each individual sites to the subscribers? Or is there a better way than replication to accomplish this?
I want to ship 500,000 aged transactions each night to an archive table and delete them from their source table in one or more logical units of work (LUW). Each row is approx 60 bytes and there is only one non clustered index on the source table presently.
I'm trying to weigh the pros and cons of 3 alternatives. One of them would basically insert the non-aged rows into tempdb, ship the aged records, truncate the table and then insert the tempdb records back into their source all in the same LUW.
For this alternative, I'd at least like to turn off logging when the records get inserted into tempdb as I dont see any value in logging that part of the activity. Is this possible?
Hi All,
Could you guys please help me with printing reports invoked thru command line/ URL access to print automatically to specific printers and specific trays and also is it possible to set the specific printer and tray as parameters.
Any suggestions is appreciated
Thanks A lot in advance
e,g :
http://localhost/reportserver?/testreports/employee sales&UserID='ABC'&LName=Lastname='victor'&rs:Command=Render
I have questions and answers from one table, I need to select questions as column names and answers column values as the results for the questions column.
View 28 Replies View RelatedI am very early on in developing a website to track issues with projects which is tied to a SQL database. I have my Projects Table, my Users Table, and am creating a third table to track issues. I'm wondering what is the best way to assign specific users to specific data/projects. The user should only be able to view & update the projects assigned to him. He should not be able to see other projects. What is the best way to assign projects/data to the users to make sure they are only viewing their data?
View 1 Replies View RelatedHi Everyone.
Looong story short. I have a screen with search criteria. Right.
I have table :
tblCandidateLicense
intPkCandidateLicenseID (PK)
intFkCandidateId
intFkLicenseTypeID
And Another table
tblLicenseTypeDef
Columns:
intPkLicenseTypeID (Pk Int)
strDescription
strLicenseCode
intRank (just for ranking)
intRankParent (for grouping types of vehicles)
tblLicenseTypeDef data contains:
1 , MotorCycle < 125,0,1,0
2 , MotorCycle > 125,0,2,0
3 , Car 1 ,0,0,1
4 , Car 2 ,0,1,1
5 , Car 3 ,0,2,1
5 , Car 4 ,0,3,1
tblCandidateLicense data contains
1 , 57, 1
2 , 57, 3
3 , 58, 4
I use the intRank to determine which vehicle is bigger and intRankParent to make groups (so motorbikes and cars searched don't bring back the wrong type)
I want to be able to search on License Type .
But now a person can search for car 4 and motorcyle > 125. Then my query needs to find all the people with car type 4 AND Smaller (car-1-2-3-4) (that is group 4), and motorcycle and smaller (1 and 2) (Group 0)
If a person search for car type Car 3 and motorcycle < 125, then car 1-2-3 and MotorCycle 1 must be returned.
I hope it makes sense.
hi
i m using row count in order to get first 16 rows from a specific table...now i want to get rows from row no. 16 to 32 (or any no which i want)...can any one tell meee how can i query it using sql server 200
Hello everybody
I'm workung on a report which will both function as a online report but also as a printed sheet. i've got a table which has to be sortable, so i made a user sort. however, to fit the report onto a page, i had to make a additional header row, which contains only the sorting arrows. now, i'd like this row not to apear on the printed out version, how would i do this?
Alternativly, would it be possible to not show the user sort icons (down- and upwards arrows), but to make the header fields clickable? This would solve my problem as well.
thanks for any advice
exmap
Hi,
I have a table where I want to use the sum function, but only on the rows with a positive value.
Is there any way to do this?
How to set ddl triggers for specific tables, instead of on entire database.
View 2 Replies View RelatedIs there a way to capture any firing for a SP such as (datetime , loginname,..) and not using SQL profiler ?
View 3 Replies View RelatedIn my datawarehouse fact table I have a column (revenue) that I want to populate based on the values of number of columns, for simplicity, say just 2 columns, 'productid' and 'affiliateid'.
I have a revenue lookup table, with those same 2 columns and the amount. So far so simple, but rather than have one row for every possible combination, I use 0 to mean default. For instance, all the affiliates have the same revenue value apart from a couple, so instead of 200 rows identical except for the affiliateid, I have one row with a '0' for the affiliateid and 4 rows with specific affiliateIDs where it differs from the default.
E.G.
AffiliateID, TypeID, Revenue
0, 1, £50
22, 1, £55
33, 1, £57
0,2,£60
22, 2, £66
33, 2, £69
To update the values, I join to the revenues table twice, one for both columns matching, and once for the default. I.E.
UPDATE facttable SET revenue = ISNULL(rev1.revenue, ISNULL(rev2.revenue,0))
FROM facttable FT
LEFT OUTER JOIN revenues rev1 ON FT.AffiliateID = rev1.AffilateID and FT.TypeID = rev1.TypeID
LEFT OUTER JOIN revenues rev2 ON rev1.AffilateID = 0 and FT.TypeID = rev1.TypeID
(In fact, this is over-simplified, because in fact there are 3 columns, so I have to have 8 joins like this).
This works very well, and cuts down the management of revenues significantly, there are a few 100 rows instead of the more than 100,000 there would be if I put every possible combination of values in its own row.
However, now there is a requirement to increase the granularity of the revenue allocation up to 5 columns, which makes 36 joins and there could well be more columns added later.
Has anyone come across a situation like this (and found a neater solution).
Im Working with stored procedure. How can i compare Columns with specific values. I want to get the greater values of those column and inserted it to other columns. i want something like these
CASE
WHEN a> b,c,d THEN a
WHEN b> a,c,d THEN b
WHEN c> a,b,d THEN c
WHEN d> a,d,c THEN d
is there any ways to implement this? i got an error..
thanks please help..