I have a Users Table. It is full of users already and I would like to start using the UserPIN in the software (this is an nvarchar column).
I would like to update the UserPIN column with the row_number. All of my efforts have resulted in setting the UserPIN to 1 for every record. I just want an update query that fill the UserPIN column in sequential order.
Below is the resultset I got using the following SQL statement
SELECT ROW_NUMBER() OVER (PARTITION BY ID ORDER BY create_date DESC) AS RowNum
,ID
,create_date
,NULL AS end_date
FROM dbo.Table_1
Resultset:
RowNum ID
create_date end_date
1 0001
2015-02-18 NULL
2 0001
2014-04-28 NULL
[Code] ....
Now, I want to update the end_date column with the create_date's values for the next row_number. Desired output is shown below:
RowNum ID
create_date end_date
1 0001
2015-02-18 NULL
2 0001
2014-04-28 2015-02-18
[Code] ....
I have 3 columns. I would like to update a table based on job_cd and permit_nbr column. if we have same job_cd and permit_nbr, reference number should be same else it should take max(reference number) from the table +1 for all rows where reference_nbr column is null
job_cd permit_nbr reference_nbr
ABC1 990 100002
ABC1 990 100002
ABC1 991 100003
ABC1 992 100004
ABC1 993 100005
ABC2 880 100006
ABC2 881 100007
ABC2 881 100007
ABC2 882 100008
ABC2 882 100008
I have a table with number and varchar columns. The last insert statement has 1 inserted.
The select statement should retrieve
a b
1 1
CREATE TABLE [dbo].[test1](
[a] [int] NULL,
[b] [varchar](10) NULL
) ON [PRIMARY]
insert into test1 values (1,'a')
insert into test1 values (2,'b')
insert into test1 values (4,'d')
insert into test1 values (12,'x')
insert into test1 values (15,NULL)
insert into test1 values (1,1)
I want to show this kind of output
UserID UserName 1 2 3 30
OR
UserID UserName 1 2 3 31
user data saved in db select distinct UserID,Name from Userss Where IsActive=1 and order by UserID and i want to just calculate no of days in month based on year and month name supplied by user. one way i can do it. first i will create a temporary table and in loop add many columns to that table and later dump user data to specific column.
I have table
id, series, seriesnr
and data
65557,AS,0
74443,AS,0
how to update table so seriesnr would be incremental , like
65557,AS,1
74443,AS,2
if i use
update x set seriesnr=select max(seriesnr) from x
then i got same seriesnr for all rows like max was calculated only one time on the begining not on each row update(why is that itseem so illogical)
65557,AS,1
74443,AS,1
I have two tables (i.e. Table1 and Table2).
SELECT
* FROM [dbo].[Table1]
Date
id
9/15/2015
[code]...
Table2 has three columns (i.e. Date, Count and Rule Type). Column “Rule Type “has a default value which is “XYZ”..Now I want to insert Data from Table1 to Table2. I am using following query:-
declare @Startdate
datetime
DEclare @enddate
datetime
[code]...
Column name or number of supplied values does not match table definition.I am using SQL 2012. I understand Table1 has 2 Columns but Table2 has 3 Columns. Is there anyway, I can move data from source table to Destination table where Destination Table has more number of Columns?
hello friends
i want to update one column from my table regularly on sequence number i.e. 0,1,2,3,4,5
i created procedure but it is not working as per my output
declare @IndexIDGen int
declare @ID int
set @ID = 0
update temp_test set indexid = NULL
declare IndexIDGen cursor for select indexid from temp_test
open IndexIDGen
FETCH Next from IndexIDGen into @IndexIDGen
while @@fetch_status = 0
begin
update temp_test set indexid = @ID where indexid is null
set @ID = @ID + 1
print @id
fetch next from IndexIDGen into @IndexIDGen
end
close IndexIDGen
deallocate IndexIDGen
where i am going in wrong direction ??????
T.I.A
I try to import data with bulk insert. Here is my table:
CREATE TABLE [data].[example](
col1 [varchar](10) NOT NULL,
col2 [datetime] NOT NULL,
col3 [date] NOT NULL,
col4 [varchar](6) NOT NULL,
col5 [varchar](3) NOT NULL,
[Code] ....
My format file:
10.0
7
1 SQLCHAR 0 10 "@|@" 2 Col2 ""
1 SQLCHAR 0 10 "@|@" 3 Col3 ""
2 SQLCHAR 0 6 "@|@" 4 Col4 Latin1_General_CI_AS
[Code] .....
The first column should store double (in col2 and col3) in my table
My file:
Col1,Col2,Col3,Col4,Col5,Col6,Col7
2015-04-30@|@MDDS@|@ADP@|@EUR@|@185.630624@|@2015-04-30@|@MDDS
2015-04-30@|@MDDS@|@AED@|@EUR@|@4.107276@|@2015-04-30@|@MDDS
My command:
bulk insert data.example
from 'R:epoolexample.csv'
WITH(FORMATFILE = 'R:cfgexample.fmt' , FIRSTROW = 2)
Get error:
Msg 4823, Level 16, State 1, Line 2
Cannot bulk load. Invalid column number in the format file "R:cfgexample.fmt".
I changed some things as:
used ";" and "," as column delimiter
changed file type from UNIX to DOS and adjusted the format file with "
" for row delimiter
Removed this line from format file
1 SQLCHAR 0 10 "@|@" 2 Col2 ""
Nothing works ....
I have a table that has two columns. One column has ID from 1 to 1800. The other column is null. I want to update the second column with values from 29 to 43. So for ID 1, value will be 29, ID value will 30 and it goes to 43. Then after it will start from 29 again and goes to 43. It goes all the way to the highest ID, i.e. 1800.I have added a script for better clarity
declare @t table (stuID int, valueID int)
insert into @t (stuID, valueID)
values (1,null), (2,null), (3,null), (4,null)
the null part is what I want to have from 29 to 43 .... all the way untill the ID reachs to 1800
I have sample XML data which is shown below in my table. I need to update one of the column names in this field.
Changing <Desc> to <Description>
Input:
DECLARE @myxml
XML
SET @myxml
= '<Cust id="1">
<Name>aaaaaaaaaa</Name>
<Desc>bbbbbbbbbb</Desc>
</Cust>'
Output:
DECLARE @myxml
XML
SET @myxml
= '<Cust id="1">
<Name>aaaaaaaaaa</Name>
<Description>bbbbbbbbbb</Desc>
</Cust>'
Hi, can anyone teach me how to automatic create a invoice number and insert or update it to a column?
View 2 Replies View RelatedI upload data from a Txt File(Txt_Temp) where I have VinNumber with 6 digits. Another table name Resrve_Temp1 where I have Vinumber with 17 digit. Now I need to update the vinnumber 6 digit to 17 digit or to new column in Txt_temp.
Txt_Temp - Table
I tried this code with no succes and only one row is updating
update Txt_Temp Set Txt_Temp.Vinnumber=dbo.R_ResrvStock.Vin
from dbo.R_ResrvStock inner join Txt_Temp on Right (dbo.R_ResrvStock.Vin,6)=Txt_Temp.VinNumber
OR Add this code in view
Select dbo.R_ResrvStock.Vin,R_Txt_Temp.Vinnumber,R_Txt_Te mp.Model_Code
from dbo.R_ResrvStock inner join R_Txt_Temp on Right (dbo.R_ResrvStock.Vin,6)=R_Txt_Temp.VinNumber
Vin
123456
123123
123789
Resrve_Temp1 - Table
asddfghjklk123654
asddfghjklk123456
asddfghjklk321564
asddfghjklk123123
asddfghjklk123789
asddfghjklk654655
asddfghjklk456465
My Result can be in Txt_Temp table or new table or with one or two columns
asddfghjklk123456 123456
asddfghjklk123123 123123
asddfghjklk123789 123789
By mistake i deleted a record form prod table.
how can i enter that record back? i get this error.
INSERT INTO item_details(ItemID,Item_Name,price) VALUES(201, bag,10)
ItemID is identity column. can i disable identity column and enter and then enable using sql statement?
I have a column with XML data stored in it. I need to update that column several times with new values for different nodes. I've written a CLR function to update the XML quickly but the update is always based on the initial value of the xmlData column. I was hoping that the subsequent updates would be based on the new data from the prior update (each xmlTable has several newData rows). Do I have to make this a table valued function and use cross apply?
UPDATE xmlTable
SET xmlTable.xmlData = Underwriting.UpdateByDynamicValue(xmlTable.xmlData,newData.NodeID,newData.NewValue)
FROM xmlTable
JOIN newData
ON xmlTable.ID = newData.fkXmlTableID
I have a table with ~30M records. I'm trying to add a column to the existing table with default value and have noticed following ... When using alter with default value- (Executes more than 45 min and killed forcefully)
ex:
ALTER TABLE dbo.Table_X Add is_Active BIT CONSTRAINT DF_Table_X_is_Active DEFAULT 'FALSE' NOT NULL
GO
When using update command after adding column with alter (without default value) it completes is 5 min.
ex:
ALTER TABLE dbo.Table_X Add is_Active BIT NULL
GO
UPDATE Table_X SET is_Active = 0 WHERE is_Active IS NULL
GO
Why there is so much of difference in execution times ? I was just trying to understand internal behavior of the SQL in these two scenarios.
My current proc updates(updates using joins of two or three tables) millions of records as per the condition provided for each department.
However, when the proc fails it writes to a ErrorTable, ERROR_MESSAGE(), ERROR_SEVERITY() and which department has failed.
Since the records are updated keeping the selected departments in loop, I get the department in a temp variable.Now, I was asked to log the specific record where the failure was occured.Something like log the identity column value or primary key value which record has failed.
I am dynamically creating a job using sql script and it does work fine(It creates the job and when it's done it gets deleted as it's created dynamically. so I won't be having any job history at all in the system.). I want to update an existing table if the jobs fails and I am not sure how I can do that using t-sql script. Is that possible?I have an idea but not sure whether it works. In the job create script, can I include the code for if the job fails then go to step 2 and update the table column with the error??? If so, how can I retrieve the error???
View 3 Replies View RelatedI'm trying to Update a column table based on values from another table but I need these values are random.My query looks like this and doesn´t work
DECLARE @Rowini int,
DECLARE @lastrow int
SET @Rowini = 1
SET @Lastrow = 80000
[code]...
I've got a table with 6 fields :
EmployeeAccess
(MasterID, LoginID, AccessID, Storage1, Storage2, Storage3)
that needs to be updated using the data in the following spreadsheet
NewEmployeeAccessData
(ID, MasterID, AccessID1, LoginID1)
There is a 1:1 relationship between the two tables..I'm trying to code a pair of update statements on the EmployeeAccess table (1 for LoginID, 1 for AccessID) with the following logic:
If LoginID is NULL, then Update LoginID with new LoginID1 value,
If LoginID is not null, and Storage1 is NULL then Update Storage1 with New LoginID1 values
If LoginID is not null, and Storage1 is not NULL and Storage2 is NULL then Update Storage2 with New LoginID1 values
etc etc...
The same applies when trying to populate the AccessID column
If AccessID is NULL, then Update AccessID with new AccessID1 value,
If AccessID is not null, and Storage1 is NULL then Update Storage1 with New AccessID1 values
If AccessID is not null, and Storage1 is not NULL and Storage2 is NULL then Update Storage2 with New AccessID1 values
etc etc.
I have no control over the schema of this table so I'm trying to work the logic on how to update the columns in my table only if the corresponding column data is NULL, else update the next non NULL Storage column.
I am trying to build a DIM table using a source table that has the following setup...
CREATE TABLE [dbo].[APPL_STATUSES](
[APPLICATIONS_ID] [varchar](10) NOT NULL,
[POS] [decimal](10, 0) NOT NULL,
[APPL_STATUS] [varchar](5) NULL,
[APPL_STATUS_DATE] [datetime] NULL,
[APPL_APPLICANT] [varchar](10) NULL)
GO
[code]....
What I am trying to do is to break out the APPL_STATUS_DATE into a STATUS_START_DATE and an STATUS_END_DATE in a new table. I also need to be able to update the STATUS_END_DATE based on the previous day's date. Like so...
CREATE TABLE [dbo].[APPL_APPLICANT_STATUSES](
[APPLICATIONS_ID] [varchar](10) NOT NULL,
[POS] [decimal](10, 0) NOT NULL,
[APPL_STATUS] [varchar](5) NULL,
[STATUS_START_DATE] [datetime] NULL,
[STATUS_END_DATE] [datetime] NULL,
[APPL_APPLICANT] [varchar](10) NULL)
GO
[code]...
Got this query and I need the following result;
declare @NumberToCompareTo int
set @NumberToCompareTo = 8
declare @table table
(
number int
)
insert into @table
select 4
[Code] ....
The query selects 4 and 5 of course. Now what I'm looking for is to retrieve the number less or equal to @NumberToCompareTo, I mean the most immediate less number than the parameter. So in this case 5
I have a table where table row gets updated multiple times(each column will be filled) based on telephone call in data.
Initially, I have implemented after insert trigger on ROW level thinking that the whole row is inserted into table will all column values at a time. But the issue is all columns are values are not filled at once, but observed that while telephone call in data, there are multiple updates to the row (i.e multiple updates in the sense - column data in row is updated step by step),
I thought to implement after update trigger , but when it comes to the performance will be decreased for each and every hit while row update.
I need to implement after update trigger that should be fired on column level instead of Row level to improve the performance?
I have a table in which a non-primary key column has a unique index on it.
If I am inserting a record into this table with a duplicate column value for the indexed column, then what will be the error number of the error in above scenario? OR How could I find this out?
How can I calculate a DateTime column by merging values from a Date column and only the time part of a DateTime column?
View 5 Replies View RelatedHello All,Is there a way to run sql select statements with column numbers inplace of column names in SQLServer.Current SQL ==> select AddressId,Name,City from AddressIs this possible ==> select 1,2,5 from AddressThanks in Advance,-Sandeep
View 1 Replies View RelatedHi,
How do you generate line numbers in Transact SQL?
Example:
In Sybase, I could use this...
select number(*), customer_name from customer_table
number(*) customer_name
----------------------------------------------------
1 Customer Name 1
2 Customer Name 2
3 Customer Name 3
Thanks,
Geoff
I have the following table
Table Name EmployeeInformation
EmployeeID EmployeeFirstName EmployeeLastName
1 |John |Baker
2 |Carl |Lennon
3 |Marion |Herbert
Table Name PeriodInformation
PeriodID PeriodStart PeriodEnd
1 |1/1/14 |12/30/14
2 |1/1/15 |12/30/15
[code]...
I want a query to join all this tables based on EmployeeID, PeriodID and LeaveTypeID sum of LeaveEntitlement.LeaveEntitlementDaysNumber based on LeaveTypeID AS EntitleAnnaul and AS EntitleSick and sum AssignedLeave.AssignedLeaveDaysNumber based on LeaveTypeID AS AssignedAnnaul and AS AssignedSick and subtract EntitleAnnaul from AssignedAnnual based on LeaveTypeID AS AnnualBalance and subtract EntitleSick from AssignedSick based on LeaveTypeID AS SickBalance
and the table should be shown as below after executing the query
EmployeeID, EmployeeFirstName, EmployeeLastName, PeriodID, PeriodStart, PeriodEnd, EntitleAnnual, AssignedAnnual, AnnualBalance, EntitleSick, AssignedSick, SickBalance
Lets say we have a table (tblProducts)
ID Item RandomNumber
-------------------------------------------
1 JEANS 1234567
2 SHIRT 72813550
3 HOOD Null
4 TROUSER 72191839
5 BLAZER 0
I want to perform a query so that SQL should look for RandomNumber Values and set a Unique Random Number Where RandomNumber Value is Null or 0.So I have got a solution as one of the MSDN Member shared the below query
select id,item,RandomNumber=Case when RandomNumber=0 then (select floor(rand()*100000000-1))
when RandomNumber is null then (select floor(rand()*100000000-1))
else RandomNumber end from tblProducts
So, can you all confirm me, that performing this query ensures that if a Value is assigned to one of the Item in RandomNumber Column, that value will not be assignend to any other Item in RandoNumberColumn.
I am currently working on an app and have an issue with a table in the database. The table has 10,000 records in it and a column is added that is to use a 4 digit in sequence. The datatype for the new column is varchar since no math will ever be done on the added column. If necessary, I can change the datatype but would prefer not to. The 4 digit would start with 0000 at ID 1 and go to 9999 at ID 10000. I'm thinking some type of update statement since it is updating each record but how would it be done sequentially?
View 9 Replies View RelatedI have a SELECT statement with multiple JOINs. I want to number the rows returned by this SELECT statement. What's the easiest way to do this?
My current SELECT statement returns this:
ProjectId -- TaskId -- TaskName
123 - 111 -- Do something
123 - 222 -- Do something else
123 - 333 -- Do one more thing
I want to return this:
ProjectId -- TaskId -- TaskName -- Sequence
123 - 111 -- Do something -- 1
123 - 222 -- Do something else -- 2
123 - 333 -- Do one more thing -- 3
I am having issues trying to write a query that would provide me the unique GUID numbers associated with a distinct PID if the unique GUID's > 1. To summarize, I need a query that just shows which PID's have more than one unique GUID. A PID could have multiple GUID's that are the same, I'm looking for the PID's that have multiple GUID's that are different/unique.
Table1
GUID PID
GUID1 PID1
GUID1 PID1
GUID1 PID1
GUID2 PID1
GUID3 PID2
GUID3 PID2
GUID3 PID2
The result of the query would only have PID1 because it has two unique GUID's. PID2 would not be listed has it has the same GUID3 in each row.
Result:
PID1
How can I add a group number to the following query?
For example, I want to be able to have all rows that have Category = 'Field Sales' and Division = 'CA BDM' to be given a unique group number (GN):
RN ReportDate Category Division TotalBalance
-------------------- ---------- ------------------------------ ------------------------------ ---------------------
1 2015-06-08 Field Sales CA BDM 299743154.3912
2 2015-06-07 Field Sales CA BDM 299765954.0354
3 2015-06-01 Field Sales CA BDM 297902654.4172
1 2015-06-08 Key Accounts Life Office 49954981.74
2 2015-06-07 Key Accounts Life Office 50016989.22
3 2015-06-01 Key Accounts Life Office 50169967.26
4 2015-05-31 Key Accounts Life Office 50169918.01
Becomes
GN RN ReportDate Category Division TotalBalance
-------------------------- ---------- ------------------------------ ------------------------------ ---------------------
1 1 2015-06-08 Field Sales CA BDM 299743154.3912
1 2 2015-06-07 Field Sales CA BDM 299765954.0354
1 3 2015-06-01 Field Sales CA BDM 297902654.4172
2 1 2015-06-08 Key Accounts Life Office 49954981.74
2 2 2015-06-07 Key Accounts Life Office 50016989.22
2 3 2015-06-01 Key Accounts Life Office 50169967.26
2 4 2015-05-31 Key Accounts Life Office 50169918.01
i.e. each combination of Category+Division results in a new GN.
The query is:
selectROW_NUMBER() over (partition by Category, Division order by ReportDate desc) 'RN'
, ReportDate
, Category
, Division
, sum(BalanceGBP) as 'TotalBalance'
FROM FlowsAndOpenings
group by ReportDate, Category, Division
order by Category, Division, RN