A vehicle loading confirm after that what time its gated out so i want to take the time duration between finish loading and gate out, find sample table records , i want to take more than 5 hrs difference between finish loading and gate out.
I want to create a subset of a geography table. My intention is to select only a few cities with a where and after that select a percent of village for each of the cities. My query look like this:
I have tried with tablesample but it doesn´t return what I expect because I have many villages from one city (for example 15 % of it) and only 2 % of other. How can I achieve my goal?
My understanding from a previous thread was that ExecuteNonQuery() could be used to display the number of rows returned. Does this also work when calling stored procedures and passing parameters? I have code (shown) that perfectly calls and returns Distinct models downloaded by Country. Yet the rowCount variable displays a -1. What should I do?Dim myCommand As New SqlClient.SqlCommand myCommand.CommandText = "ap_Select_ModelRequests_RequestDateTime" myCommand.CommandType = CommandType.StoredProcedure myCommand.Parameters.AddWithValue("@selectDate", dateEntered) myCommand.Parameters.AddWithValue("@selectCountry", CInt(selectCountry)) myCommand.Connection = con con.Open() Dim rowCount As Integer = myCommand.ExecuteNonQuery() numberParts.Text = rowCount.ToString con.Close() Thank you.
hello, i have a stored procedure SELECT CommentID, UserName, CommentingDate FROM Comm WHERE PictureID = @PictureID ORDER BY CommentingDate DESC witch shows me the users who commented a Picture with PictureID = x I need to add two rows at that stored procedure, one to show the number of total comments at that picutre (like counting the number of rows returned) and the second to show count the DISTINCT users who commented that picture I tryied with COUNT but i have to use GROUP BY and i don't think this is good... I hope you understand... please help me, thanks
This is my SQL : Select p.patientid,p.patientname,p.patientIc,pvi.DateOfAdmission,pvi.visitid,pvi.ward,pvi.bedno,pf.status,pvi.SurgeonName,(f.Title + ' ( Ver ' + (CAST(f.Version as Char(10))) + ')') as Title FROM patient p, patientvarianceinfo pvi,patientForm pf,Form f where (p.PatientName LIKE '%" & Name & "%' or p.PatientIc LIKE '%" & ic & "%' or pvi.Ward LIKE '%" & ward & "%' or pvi.Bedno LIKE '%" & bed & "%') and (p.patientid = pvi.patientid) and (p.patientid = pf.patientid) and (pvi.patientid = pf.patientid) and (pf.FormID = f.FormID)and p.patientid in (select patientid from patientform pf)how do i get the number of rows?
who has workflows created and ordered by CreateTimestamp . i need to count the number of workflows from top to point where there is either a success or failure workflow that occurs at the latest .
1.ban 137108351 has success workflow and prior to that workflow it has 2 workflows (exclude success and failure) 2.ban 104917284 has success workflow as latest (it still has failure but not considered because it is occurred earlier to success ) and prior to that workflow it has 2 workflows (exclude success and failure) 3.ban 107500674 has failure workflow and prior to that workflow it has 0 workflows (exclude success and failure)
below provided code for sample data as well
GO /****** Object: Table [Temp].[deleteit] Script Date: 7/31/2015 3:04:55 PM ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO CREATE TABLE [Temp].[deleteit]( [ban] [nvarchar](256) NULL,
I have a really basic question. The following SQL query works for me:
Select EnterUserID, Enterdate from tblCsEventReminders where EnterDate >= Convert(datetime, '2015-04-01')
I am essentially trying to write a query to count the number of user logins after a certain date, so I need to count 'EnterUserID' but I am having problems getting the count() function to work.
Hi,Should be quite simple but can someone please tell me the best way tocount the number of rows in an UNION ALL statement.I tried using @@ROWCOUNT but that doesn't seem to contain the correctnumber.Also, I assume that running the query again but just returning count(*)instead of the data is horribly inefficient (plus the code is thenbloated.)?Thanks,Mark
I have a table called Employees which has lots of columns but I only want to count some specific columns of this table.
i.e. EmployeeID: 001
week1: 40 week2: 24 week3: 24 week4: 39
This employee (001) has two weeks below 32. How do I use the COUNT statement to calculate that within these four weeks(columns), how many weeks(columns) have the value below 32?
I have a question regarding the total count of the table rows
Select count (name) from test. Lets say I have got 200 count. And Select count (lastname) from test1.I have got 200.And this counts I should store it in "There are nn name items awaiting your attention and nn pending lastname's awaiting your approval".
I am using SQL Server 2008.Each stock item will have default 4 document type (1, 5, 6, 7) and each will have 3 zone's (1, 2, 3) to qualify. Each zone will be updated to 1 for that document type if the item successfully pass through it. If all zone are NULL means no transaction. How to retrieve only the failed rows which means not all zone are 1 or NULL.In the image GJ-00064 has one row failed. So how to get the count of failed rows for each item
With the function below, I receive this error:Error:Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 1, current count = 0.Function:Public Shared Function DeleteMesssages(ByVal UserID As String, ByVal MessageIDs As List(Of String)) As Boolean Dim bSuccess As Boolean Dim MyConnection As SqlConnection = GetConnection() Dim cmd As New SqlCommand("", MyConnection) Dim i As Integer Dim fBeginTransCalled As Boolean = False 'messagetype 1 =internal messages Try ' ' Start transaction ' MyConnection.Open() cmd.CommandText = "BEGIN TRANSACTION" cmd.ExecuteNonQuery() fBeginTransCalled = True Dim obj As Object For i = 0 To MessageIDs.Count - 1 bSuccess = False 'delete userid-message reference cmd.CommandText = "DELETE FROM tblUsersAndMessages WHERE MessageID=@MessageID AND UserID=@UserID" cmd.Parameters.Add(New SqlParameter("@UserID", UserID)) cmd.Parameters.Add(New SqlParameter("@MessageID", MessageIDs(i).ToString)) cmd.ExecuteNonQuery() 'then delete the message itself if no other user has a reference cmd.CommandText = "SELECT COUNT(*) FROM tblUsersAndMessages WHERE MessageID=@MessageID1" cmd.Parameters.Add(New SqlParameter("@MessageID1", MessageIDs(i).ToString)) obj = cmd.ExecuteScalar If ((Not (obj) Is Nothing) _ AndAlso ((TypeOf (obj) Is Integer) _ AndAlso (CType(obj, Integer) > 0))) Then 'more references exist so do not delete message Else 'this is the only reference to the message so delete it permanently cmd.CommandText = "DELETE FROM tblMessages WHERE MessageID=@MessageID2" cmd.Parameters.Add(New SqlParameter("@MessageID2", MessageIDs(i).ToString)) cmd.ExecuteNonQuery() End If Next i ' ' End transaction ' cmd.CommandText = "COMMIT TRANSACTION" cmd.ExecuteNonQuery() bSuccess = True fBeginTransCalled = False Catch ex As Exception 'LOG ERROR GlobalFunctions.ReportError("MessageDAL:DeleteMessages", ex.Message) Finally If fBeginTransCalled Then Try cmd = New SqlCommand("ROLLBACK TRANSACTION", MyConnection) cmd.ExecuteNonQuery() Catch e As System.Exception End Try End If MyConnection.Close() End Try Return bSuccess End Function
I am getting an exception. And i don't know whether this exception is from the C# coding or SQL SERVER."Cannot roll back InsertRxs. No transaction or savepoint of that name was found.Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1.A transaction that was started in a MARS batch is still active at the end of the batch. The transaction is rolled back."
I have 3 tables: Suppliers, Documents and Verification, each document may have multiple verification where I need to get the last verification according to verification date. So I just need a "Select top 1 result from Documents, Verification where doc_iddoc=ver_iddoc and result='True' order by ver_date desc" so far I get the result of the last verification, but here's the problem:
I need to get a row with the count of documents for each supplier, I mean:
Supplier Name Docs NegativeVerification Acme Co 10 1
that is I would need to loop for each supplier and each document and get the last verification, if one of any of documents have negative verification then add it to negative results. Is it possible to achieve this with a query or do I have to do it through stored procedure?
If I just use a simple select statement, I find that I have 8286 records within a specified date range.
If I use the select statement to pull records that were created from 5pm and later and then add it to another select statement with records created before 5pm, I get a different count: 7521 + 756 = 8277
Is there something I am doing incorrectly in the following sql?
DECLARE @startdate date = '03-06-2015' DECLARE @enddate date = '10-31-2015' DECLARE @afterTime time = '17:00' SELECT General_Count = (SELECT COUNT(*) as General FROM Unidata.CrumsTicket ct
How can I add a group number to the following query?
For example, I want to be able to have all rows that have Category = 'Field Sales' and Division = 'CA BDM' to be given a unique group number (GN):
RN ReportDate Category Division TotalBalance -------------------- ---------- ------------------------------ ------------------------------ --------------------- 1 2015-06-08 Field Sales CA BDM 299743154.3912 2 2015-06-07 Field Sales CA BDM 299765954.0354 3 2015-06-01 Field Sales CA BDM 297902654.4172 1 2015-06-08 Key Accounts Life Office 49954981.74 2 2015-06-07 Key Accounts Life Office 50016989.22 3 2015-06-01 Key Accounts Life Office 50169967.26 4 2015-05-31 Key Accounts Life Office 50169918.01
Becomes
GN RN ReportDate Category Division TotalBalance -------------------------- ---------- ------------------------------ ------------------------------ --------------------- 1 1 2015-06-08 Field Sales CA BDM 299743154.3912 1 2 2015-06-07 Field Sales CA BDM 299765954.0354 1 3 2015-06-01 Field Sales CA BDM 297902654.4172 2 1 2015-06-08 Key Accounts Life Office 49954981.74 2 2 2015-06-07 Key Accounts Life Office 50016989.22 2 3 2015-06-01 Key Accounts Life Office 50169967.26 2 4 2015-05-31 Key Accounts Life Office 50169918.01
i.e. each combination of Category+Division results in a new GN.
The query is:
selectROW_NUMBER() over (partition by Category, Division order by ReportDate desc) 'RN' , ReportDate , Category , Division , sum(BalanceGBP) as 'TotalBalance' FROM FlowsAndOpenings group by ReportDate, Category, Division order by Category, Division, RN
I have either 2 or 1 row for each customer number I want to write a SQL to pull data into 1 table based on same CustomerNumber, if only one row is present for the particular customer number it should pull null in FName2,LName2,DOB2 columns.
example: CustNumber Fanme Lname DOB 1 Sam tiller 08/26/1981 1 Joe timy 01/02/1986 2 jack niks 09/09/1990
Result I want: CustNumber Fname1 Lname1 DOB1 Fname2 Lname2 DOB2 1 Sam Tiller 08/26/1981 Joe timy 01/02/1986 2 Jack niks 09/09/1990 null null null
How is the best way to make a function for summing an arbitrary number of times values (table parm?)- I 've read it's necessary to convert to seconds, sum then convert back, but Im' wondering if there's an alternative.
Here's the example I want to sum: 00:02:01:30 00:01:28:10 00:01:01:50 00:06:50:30 00:00:01:50
Name Description Date Question Answer Customer A Profile Assessment 01/01/2015
How complex is the structure?
Customer A Profile Assessment 01/01/2015 The total value of assets? Less than GBP 1 million
Customer A Profile Assessment 01/01/2015 The volume of transactions undertaken? Low (-1 pmth)
[Code] ....
However, I would like it to output;
Name Description Date How complex is the structure? The total value of assets? The volume of transactions undertaken? How was the client introduced? Where does the Customer reside?
[Code] ....
The number of questions are unknown for each RiskReviewID and they can be added to in the future.
Consider the following: I have a table, say ORDERS, with these entries -
CustID ProductID 1 CAN 2 2 3 1,2 4 4 5 1,2,3,4,5,CAN 6 10 7 CAN 8 1,CAN
I'd like to write a script to return only those rows WHERE ProductID = CAN along with other values in the same column. In this example, I'd like to return rows 5 & 8. How can I write this in T-SQL? So, say, check if ProductID has a comma ',' value plus the 'CAN' string. If yes, then return that row. If I use the LIKE operator, it'll return rows 1,5,7, and 8.
I have a table with the following structure in sql server 2005
create table app( sno int, name varchar(50), add varchar(50), city varchar(50), state varchar(50) )
it contains the follwing data ------------------------------------------ sno name add city state ------------------------------------------ 1 mark street no1 newcity newstate 2 mark street no1 newcity newstate 3 mark street no1 newcity newstate 4 mark street no1 newcity newstate 5 mark street no1 newcity newstate 6 mark street no1 newcity newstate 7 mark street no1 newcity newstate 8 mark street no1 newcity newstate 9 mark street no1 newcity newstate 10 mark street no1 newcity newstate 11 mark street no1 newcity newstate 12 mark street no1 newcity newstate 13 mark street no1 newcity newstate 14 mark street no1 newcity newstate 15 mark street no1 newcity newstate 16 mark street no1 newcity newstate 17 mark street no1 newcity newstate 18 mark street no1 newcity newstate 19 mark street no1 newcity newstate 20 mark street no1 newcity newstate
----------------------------------------
I want to retrive previous 5 records, next 5 records and the record that meet the where condition of a select query.
When I run
select sno,add,name,city,state from app where sno=7
I want the following result
------------------------------------------ sno name add city state ------------------------------------------ 2 mark street no1 newcity newstate | 3 mark street no1 newcity newstate | 4 mark street no1 newcity newstate | -- previous 5 records 5 mark street no1 newcity newstate | 6 mark street no1 newcity newstate | 7 mark street no1 newcity newstate --- searched record 8 mark street no1 newcity newstate | 9 mark street no1 newcity newstate | 10 mark street no1 newcity newstate |--- next 5 records 11 mark street no1 newcity newstate | 12 mark street no1 newcity newstate | ----------------------------------------
if there is a method to get the above result set, kindly post the query.
I'd like a function that returns the number of hours in a specific month (or the number of days which I could then multiply by 24). The function would have to consider leap years for February.
I need to write a SQL to find number of hours between a begin time and end time. The fields are varchar. There are several date functions in sql, but I am not able to figure out how to get the hours between two times that is not in date format.
I am trying to find out the the Average number of contact hours per student. in Reporting Services 2005. The contact hours is the in the Totaltime field
Is this formula correct
=Sum(Fields!TotalTime.Value)/Avg(Fields!TotalTime.Value) is in the =Fields!StateServices.Value Group
