Hello,
If I'm running an insert statement in a stored procedure, and it fails, an I have code to do:
if ( @@error <> 0)
begin
rollback transaction
return -1
end
This will still not stop an error from returning to the program right? I'm coding my DAL, and wanted to make sure.
Thanks.
Hi All
I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.
If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.
I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.
set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN
It's got me stumped, so any ideas gratefully received.Thx
For some reason, my stored procedure which is kicked off by VB.NET is growing the log file for the database in question by gigs, very fast. Why is it doing this?
The code:
Sub Main()
objConn.Open()
Dim cmdSql As New SqlClient.SqlCommand("IT_sss_Collector_DotNet", objConn)
cmdSql.CommandType = CommandType.StoredProcedure
cmdSql.CommandTimeout = 1000
Dim reader As SqlDataReader = cmdSql.ExecuteReader()
Dim ppa_rowcount As Integer
ppa_rowcount = 0
If reader.HasRows() Then ' test to see if there is any data in the reader
reader.Read()
ppa_rowcount = Convert.ToInt16(reader("pcount"))
End If
reader.Close()
'Dim ppa_rowcount As Integer = Convert.ToInt16(cmdSql.ExecuteScalar())
MsgBox(ppa_rowcount)
If ppa_rowcount > 0 Then
MsgBox("got here")
RunsssReport()
End If
objConn.Close()
End Sub
The Stored proc:
http:\www.webfound.netstoredproc_growinglogfile.txt
the log is 29 gigs! this is a copy of a production database running on my test server. The production db log is only 15 gigs. How do I manage this and why it is growing at such a crazy porportion just from running this simple stored proc with a cursor???????
Hi,
I am using sql2k5. I just wanted to throw an error from stored procedure with some message to C# to rollback my transaction.
Here is how i wnated to do ( in sequence )
C#
=====
Open a connection
Begin the transaction
Execute the command
In the Stored Proc
===========
do multiple operations one by one
if error
stop processing further
Throw the error
C#
========
if exception
rollback the transaction
else
commit the transaction
I have tried using raise error in stored proc but never thrown exception
Can any one let me know how to achieve this scenario??
~Mohan Babu
We have a high volume database with 1000's of users and 1000's of procs. Our application enforces a 20 second timeout on all connections.
We can't adjust the 20 seconds - this is a business rule.
It sometimes happens that a proc does not complete within 20 seconds and then times out halfway though. This causes data inconsistency where 50% of the code was saved to the DB and 50% was not - seeing that a stored proc is not transactional and therefor does not roll back the code.
We can't put the code in a TRANSACTION in order to roll back when a time out occurs, because this causes exclusive locks on the tables.
So I guess my question is:
Is it possible to undo/rollback all the code in a proc when a timeout occurs - without using a TRANSACTION? And if a TRANSACTION is the only way - how do I avoid the exclusive lock and blocks?
I'm receiving the below error when trying to implement Execute SQL Task.
"The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION." This error also happens on COMMIT as well and there is a preceding Execute SQL Task with BEGIN TRANSACTION tranname WITH MARK 'tran'
I know I can change the transaction option property from "supported" to "required" however I want to mark the transaction. I was copying the way Import/Export Wizard does it however I'm unable to figure out why it works and why mine doesn't work.
Anyone know of the reason?
I am trying to create a page that adds users to a MS SQL database. In doing so, I have run into a couple errors that I can't seem to get past. I am hoping that I could get some assistance with them.
Error from SQL Debug:
---
Server: Msg 295, Level 16, State 3, Procedure AdminAddUser, Line 65
[Microsoft][ODBC SQL Server Driver][SQL Server]Syntax error converting character string to smalldatetime data type.
---
Error from page execution:
---
Exception Details: System.Data.OleDb.OleDbException: Error converting data type varchar to numeric.
Source Error:
Line 77: cmd.Parameters.Add( "@zip", OleDbType.VarChar, 100 ).Value = Request.Form("userZip")
Line 78:
Line 79: cmd.ExecuteNonQuery()
---
Below is what I currently have for my stored procedure and the pertinent code from the page itself.
Stored Procedure:
---
CREATE PROCEDURE dbo.AdminAddUser( @username varchar(100),
@password varchar(100),
@email varchar(100),
@acct_type varchar(100),
@realname varchar(100),
@billname varchar(100),
@addr1 varchar(100),
@addr2 varchar(100),
@city varchar(100),
@state varchar(100),
@country varchar(100),
@zip varchar(100),
@memo varchar(100) )
AS
BEGIN TRAN
--
-- Returns 1 if successful
-- 2 if username already exists
-- 0 if there was an error adding the user
--
SET NOCOUNT ON
DECLARE @error int, @rowcount int
--
-- Make sure that there isn't already a user with this username
--
SELECT userID
FROM users
WHERE username=@username
SELECT @error = @@ERROR, @rowcount = @@ROWCOUNT
IF @error <> 0 OR @rowcount > 0 BEGIN
ROLLBACK TRAN
RETURN 2
END
--
-- Set expiration date
--
DECLARE @expDate AS smalldatetime
IF @acct_type = "new_1yr" BEGIN
SET @expDate = DATEADD( yyyy, 1, GETDATE() )
END
IF @acct_type = "new_life" BEGIN
SET @expDate = DATEADD( yyyy, 40, GETDATE() )
END
DECLARE @paidCopies AS decimal
SET @paidCopies = 5
--
-- Add this user to the database
--
IF @acct_type <> "new" BEGIN
INSERT INTO users (userName, userPassword, userEmail, userJoinDate,
userPaidCopies, userExpirationDate, userLastPaidDate,
userBname, userRealName, userAddr1, userAddr2, userCity,
userState, userCountry, userZip, userMemo )
VALUES (@username, @password, @email, GETDATE(), @realname, @billname,
@paidCopies, @expDate, GETDATE(), @addr1, @addr2, @city, @state, @country, @zip, @memo )
SELECT @error = @@ERROR, @rowcount = @@ROWCOUNT
IF @error <> 0 OR @rowcount < 1 BEGIN
ROLLBACK TRAN
RETURN 0
END
END
IF @acct_type = "new" BEGIN
INSERT INTO users (userName, userPassword, userEmail, userJoinDate,
userBname, userRealName, userAddr1, userAddr2, userCity,
userState, userCountry, userZip, userMemo )
VALUES (@username, @password, @email, GETDATE(), @realname, @billname,
@addr1, @addr2, @city, @state, @country, @zip, @memo )
SELECT @error = @@ERROR, @rowcount = @@ROWCOUNT
IF @error <> 0 OR @rowcount < 1 BEGIN
ROLLBACK TRAN
RETURN 0
END
END
COMMIT TRAN
RETURN 1
GO
---
Page Code:
---
Sub AddUser(Sender as Object, e as EventArgs)
Dim db_conn_str As String
Dim db_conn As OleDbConnection
Dim resultAs Int32
Dim cmdAs OleDbCommand
db_conn_str = "Provider=SQLOLEDB;Data Source=localhost;Initial Catalog=xxxxx; User ID=xxxxx; PWD=xxxxx;"
db_conn = New OleDbConnection( db_conn_str )
db_conn.Open()
cmd = new OleDbCommand( "AdminAddUser", db_conn )
cmd.CommandType = CommandType.StoredProcedure
cmd.Parameters.Add( "result", OleDbType.Integer ).Direction = ParameterDirection.ReturnValue
cmd.Parameters.Add( "@username", OleDbType.VarChar, 100 ).Value = Request.Form("userName")
cmd.Parameters.Add( "@password", OleDbType.VarChar, 100 ).Value = Request.Form("userPass")
cmd.Parameters.Add( "@email", OleDbType.VarChar, 100 ).Value = Request.Form("userEmail")
cmd.Parameters.Add( "@acct_type", OleDbType.VarChar, 100 ).Value = Request.Form("userEmail")
cmd.Parameters.Add( "@realname", OleDbType.VarChar, 100 ).Value = Request.Form("userRealName")
cmd.Parameters.Add( "@billname", OleDbType.VarChar, 100 ).Value = Request.Form("userBname")
cmd.Parameters.Add( "@addr1", OleDbType.VarChar, 100 ).Value = Request.Form("userAddr1")
cmd.Parameters.Add( "@addr2", OleDbType.VarChar, 100 ).Value = Request.Form("userAddr2")
cmd.Parameters.Add( "@city", OleDbType.VarChar, 100 ).Value = Request.Form("userCity")
cmd.Parameters.Add( "@state", OleDbType.VarChar, 100 ).Value = Request.Form("userState")
cmd.Parameters.Add( "@country", OleDbType.VarChar, 100 ).Value = Request.Form("userCountry")
cmd.Parameters.Add( "@memo", OleDbType.VarChar, 100 ).Value = Request.Form("userMemo")
cmd.Parameters.Add( "@zip", OleDbType.VarChar, 100 ).Value = Request.Form("userZip")
cmd.ExecuteNonQuery()
(...)
---
Hi all,
can anyone tell me if an oleDb connection (provider is Jet 4.0 to Access database) can be enlisted in a Distributed Transaction?
The goal is to copy data from SqlServer to Access within a transaction.
Pier
I am trying to do an insert with a SPand I get the following error: "The name 'A2LA Website' is not permitted in this context. Only constants, expressions, or variables allowed here. Column names are not permitted."
When iParentID=30 and strTexte="A2LA Website"
What an I doing wrong?
Table:
ID int(identity)
ParentID int
Text nvarchar(50)
Valeur nvarchar(50) Allow Null
Ordre int Allow Nulls
Public Sub addItemToDdSelection(ByVal strTable As String, ByVal iParentID As Int16, ByVal strTexte As String)
Dim connect As New SqlConnection(strConnection)
Dim cmdSelect As New SqlCommand("AddDropDownContent", connect)
Dim paramReturnValue As SqlParameter
Dim strError As String
cmdSelect.CommandType = CommandType.StoredProcedure
'PARAM
cmdSelect.Parameters.Add("@intParentID", iParentID)
cmdSelect.Parameters.Add("@strTexte", strTexte)
Try
connect.Open()
cmdSelect.ExecuteNonQuery()
connect.Close()
Catch ex As Exception
strError = ex.Message
Finally
If connect.State = ConnectionState.Open Then
connect.Close()
End If
End Try
End Sub
ALTER PROCEDURE dbo.AddDropDownContent
(
@intParentID int,
@strTexte varchar(50)
)
AS
EXEC ('INSERT INTO DropDownMenus (ParentID, Texte) VALUES(' + @intParentID + ',"' + @strTexte + '")')
I have the following stored proc that is providing the following error - Server: Msg 156, Level 15, State 1, Line 79[Microsoft][ODBC SQL Server Driver][SQL Server]Incorrect syntax near the keyword 'ORDER'.
The sp works fine if the DateOfBirth elements are removed. I think it is something to do with the way in which the date variable is incorporated into the string that will be executed by the EXEC command but I'm unsure as to what is wrong.
CREATE PROCEDURE dbo.GetPersonsByName (@FirstName varchar(50)=NULL, @FamilyName varchar(50)=NULL, @DateOfBirth datetime=NULL)
AS
EXEC ('SELECT PersonId, Title, FirstName, FamilyName , AltFamilyName, Sex, DateOfBirth, Age, DateOfDeath, CauseOfDeath, Height, Weight, ABO, RhD, Comments, LocalIdNo, NHSNo, CHINo, Hospital, HospitalNo, AltHospital, AltHospitalNo, EthnicGroup, Citizenship, NHSEntitlement, HomePhoneNo, WorkPhoneNo, MobilePhoneNo, CreatedBy, DateCreated, UpdatedBy, DateLastUpdated
FROM vw_GetPersons WHERE FirstName LIKE ''%' + @FirstName + '%'' AND FamilyName LIKE ''%' + @FamilyName + '%'' AND DateOfBirth = '+ @DateOfBirth +' ORDER BY FamilyName, FirstName')
GO
Can anyone see an error here? I am getting a general exception when call this and it is driving me crazy. What am I missing? The error is.....{"Incorrect syntax near 'UpdateStaffDept'." ... Any help is greatly appreciated! Below is the code calling the proc
Thank you!
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER PROCEDURE [dbo].[UpdateStaffDept]
@Co_Id INT,
@CardNo VARCHAR(50),
@DeptNo VARCHAR(50)
AS
SET NOCOUNT ON
DECLARE
@Error INT
SELECT @Error = @@Error
IF @Error = 0
BEGIN
BEGIN TRANSACTION
UPDATE Staff
SET Dept_No = @DeptNo
WHERE Co_Id = @Co_Id
AND PC_Id IN (SELECT PC_ID FROM PC_Number WHERE PC_Number = @CardNo)
SELECT @Error = @@Error
IF @Error <> 0
BEGIN
ROLLBACK TRANSACTION
RETURN @Error
END
ELSE
COMMIT TRANSACTION
END
Dim seldeptno As String
seldeptno = ddlEditPosDept.SelectedValue
Dim cmdChnDept As SqlCommand
cmdChnDept = New SqlCommand("UpdateStaffDept", conEditPos)
cmdChnDept.Parameters.Add(New SqlParameter("@Co_Id", SqlDbType.Int 10))
cmdChnDept.Parameters("@Co_Id").Value = compid
cmdChnDept.Parameters.Add(New SqlParameter("@CardNo", SqlDbType.VarChar, 50))
cmdChnDept.Parameters("@CardNo").Value = lblEditPosCardNo.Text
cmdChnDept.Parameters.Add(New SqlParameter("@DeptNo", SqlDbType.VarChar, 50))
cmdChnDept.Parameters("@DeptNo").Value = seldeptno
cmdChnDept.ExecuteNonQuery()
I come from an Access/VB background where in an error trapping routine or testing for an error your statement "exit sub" ended the process. WHen using a stored procedure and you come across an error what is the best method to exit/end the stored proc?
View 3 Replies View RelatedI have a stored proc that loops through records using a cursor. If during the loop an error occurs i need to trap the error and write it to a log file.
Error handling needs to be placed in the update and insert sections and the error that occurs needs to get recorded along current row from the cursor.
Here is the code:
declare
@tier_id int,
@tier_desctext varchar(50),
@tier_shortdesc varchar(50),
@long_name varchar(50),
@short_name varchar(50),
@rec_count int
--Cursor for UES data
DECLARE cr_ues_tier INSENSITIVE CURSOR
FOR SELECT DISTINCT tier_id, tier_desctext, tier_shortdesc
FROM "dbsourcedayoldprod".ues.dbo.Tiers
OPEN cr_ues_tier
--Select cursor values into local variables
FETCH NEXT FROM cr_ues_tier INTO @tier_id, @tier_desctext, @tier_shortdesc
WHILE (@@FETCH_STATUS <> -1)
BEGIN
--Set Data Mart variables
SELECT @long_name = long_name, @short_name = short_name
FROM uesrpt..coverage_level
WHERE ues_tier_id = @tier_id
--Set the record counter
SET @rec_count = (select ues_tier_id from uesrpt..coverage_level where ues_tier_id = @tier_id)
--Are there exsisting records if so go to the update section
IF @rec_count <> 0
--Update Data Mart values if they have changed
BEGIN
IF @long_name <> @tier_desctext
OR (@long_name IS NULL AND @tier_desctext IS NOT NULL)
OR (@long_name IS NOT NULL AND @tier_desctext IS NULL)
OR @short_name <> @tier_shortdesc
OR (@short_name IS NULL AND @tier_shortdesc IS NOT NULL)
OR (@short_name IS NOT NULL AND @tier_shortdesc IS NULL)
UPDATE uesrpt..coverage_level
SET long_name = @tier_desctext,
short_name = @tier_shortdesc
WHERE ues_tier_id = @tier_id
END
--Rows don't exsist in the Data Mart - Insert new rows
ELSE
INSERT INTO uesrpt..coverage_level (ues_tier_id, long_name, short_name)
SELECT @tier_id, @tier_desctext, @tier_shortdesc
--Get next row from UES cursor
FETCH NEXT FROM cr_ues_tier INTO @tier_id, @tier_desctext, @tier_shortdesc
END
CLOSE cr_ues_tier
DEALLOCATE cr_ues_tier
GO
Any help is appreciated.
Thanks.
'Ello there. This proc has been giving me headaches for a week now, hopefully someone here knows whats wrong with it.
CREATE PROC [dbo].[search_querry_results](
@datefrom datetime = NULL,
@datetodatetime = NULL,
@querry_string varchar(60),
@slice int
)
AS
DECLARE @querry nvarchar(2000)
SET @querry = 'SELECT TOP ' + CAST(@slice AS varchar(100)) + ' * FROM FREETEXTTABLE( Exponent, *, ''' + @querry_string + ''' ) as ct JOIN Exponent AS e ON ct.[KEY] = e.[Key] WHERE date > ' + CAST( @datefrom AS varchar(30)) + ' AND date < ' + CAST(@dateto AS varchar(30)) + ' ORDER BY Rank DESC'
BEGIN
IF ( @datefrom IS NOT NULL ) AND ( @dateto IS NOT NULL )
EXEC sp_executesql @querry
END
GO
I am running it from Query Analyzer using the following line
EXEC search_querry_results @datefrom = '01/01/1970' , @dateto = '01/01/1980', @querry_string = 'Student' , @slice = '10'
The error it is giving me is: Line 1: Incorrect syntax near '1'.
Anyone have any ideas what is going wrong?
This query keeps giving me a Primary Key violation error and I am not sure what it is getting at. maybe you can help?
truncate table tbl_rtv_cosmetic_dif
go
insert tbl_RTV_COSMETIC_DIF
select d.fisc_yr
,d.fisc_pd
,d.fisc_wk
,d.fisc_dy
,substring(a.long_sku,1,4) as DeptNo
,substring(a.long_sku,7,3) as VendorNo
,substring(a.long_sku,10,5) as MarkStyleNo
,a.Loc as LocNo
,convert(int,a.RsnCd) as ReasonCode
,min(a.EAN_Nbr) as UPCEANNo
,coalesce(i.own_rtl,0) as OwnedCur
,sum(convert(int,a.units)) as UPCUnits
from november a
inner join generalinfo..tbl_fisc_date d
on a.date = d.cal_date
left outer join itemdata..tbl_item_import_history i
on substring(a.long_sku,1,4) = i.dept
and substring(a.long_sku,7,3) = i.vendor
and substring(a.long_sku,10,5) = i.mrk_style
and d.fisc_yr = i.amc_yr
and d.fisc_pd = i.amc_pd
and d.fisc_wk = i.amc_wk
group by fisc_yr,fisc_pd,fisc_wk,fisc_dy
,substring(long_sku,1,4),substring(long_sku,7,3),substring(long_sku,10,5)
,loc,rsncd,own_rtl
I have a table I insert a record into to give access to a user. It usesprimary keys so duplicates are not allowed, so trying to add a recordfor a user more than once is not allowed.In my .NET programs, sometimes it's easier to let the user select agroup of people to give access to eben if some of them may already haveit.Of course this throws an exception an an error message. Now I couldcatch and ignore the message in .NET for this operation but then I'mstuck if something is genuinely wrong.So is there a way to do this? :In my stored procedure determine if an error occured because of aduplicate key and somehow not cause an exception to be returned toADO.NET in that case?
View 5 Replies View RelatedHi all,I have a sproc that uses OpenRowset to an Oracle db. If OpenRowseterrors, it terminates the procedure. I need it to continueprocessing. Is there any workaround for this?ThanksPachydermitis
View 1 Replies View RelatedI have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.
for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.
I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.
if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
and
Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.
Please help me it's very urgent.
When I try to deploy this managed stored proc assembly on SQL Server 2005 I get this error:
Failed to initialize the Common Language Runtime (CLR) v2.0.50727 with HRESULT 0x8007000e. You may fix the problem and try again later
I looked on the net but found no documentation about it. I know the CLR v2.0 is working as I have some ASP.NET apps running from this server that use it. Any ideas?
i try create this example:http://www.codeproject.com/KB/webforms/ReportViewer.aspxI have Northwind database added in the SQL server management and i select Northwind databse in drop box and I push Execute!ALTER PROCEDURE ShowProductByCategory(@CategoryName nvarchar(15)
)ASSELECT Categories.CategoryName, Products.ProductName,
Products.UnitPrice, Products.UnitsInStockFROM Categories INNER JOIN
Products ON Categories.CategoryID = Products.CategoryIDWHERE
CategoryName=@CategoryNameRETURNbut error is:Msg 208, Level 16, State 6, Procedure
ShowProductByCategory, Line 11Invalid object name
'ShowProductByCategory'.on web not so clear what is issue pls. help
Does anyone know what this error message is telling me.
Thanks in advance everyone.
RB
I have a Stored Proc that is called by a SQL Job in SQL Server 2000. This stored proc deadlocks once every couple of days. I'm looking into using the @@error and try to doing a waitfor .5 sec and try the transaction again. While looking around google I've come across a few articles stating that a deadlock inside a Stored Proc will stop all execution of the stored proc so I will not be able doing any error handling. Is this true? Does anyone have any experience that could help me out?
I know the best solution would be to resolve why I get a deadlock. We are currently looking into that but until we can resolve those issues I would like to get some type of error handling in place if possible.
Thank you,
DMW
I feel like I'm missing something obvious here, but I'm stumped...I have a stored procedure with code that looks like:INSERT INTO MyTableA ( ...fields... ) VALUES (...values...)IF (@@ERROR <> 0)BEGINROLLBACK TRANSACTION;RAISERROR('An error occurred in the stored proc.', 16, 1);RETURN(1);END--FORCING AN ERROR AT THE END FOR TESTING PURPOSESRAISERROR('Proc Successful',16,1)On MyTableA, there is a trigger that loops through the inserted data andstops the insert in certain circumstances, returning an error:IF (some criteria)BEGINROLLBACKRAISERROR('An error occurred in the trigger.',16,1)RETURNENDWhen I call the stored procedure from VB (connecting via RDO) witherror-causing data, the trigger successfully stops the insert, and adds thetrigger-error-msg to the errors collection, but it does NOT seem to createan error situation back in the stored procedure. The procedure finishes upwith the "Proc Successful" message, so that when I iterate through theerrors collection back in VB, I have "Proc Successful" followed by "An erroroccurred in the trigger."Is there some way I'm not finding to have the calling procedure recognizethat a raiserror occurred in the trigger and behave appropriately for anerror situation?Jen
View 1 Replies View RelatedHi,I a stored procedure that inserts a record into a table asbelow.The insert works OK, but if the insert violates a uniqueindewx constraint on one of the columns, the proc terminatesimmediately, and does NOT execute the 'if @@ERROR <> 0'statement.Am I doing something wrong, or do I need to set an attributesomewhere?tia,Billbegin traninsert into Users(UserName, UserPWD, Lname, Fname, UserDesc)values (@userName, @userPWD, @lname, @fname, @userDesc)if @@ERROR <> 0beginrollback transet @returnCode = -2set @errMsg = 'SQL error '+ convert(varchar(6), @@ERROR)+ ' occurred adding user '+ @userNameend
View 1 Replies View RelatedI am trying to add a data driven subscription to my report. When I get to the screen to enter the Delivery Query, I enter the stored procedure (GetStatusReportData) in the query box. When i try to validate, I get a "Query is not valid" error. If I replace the stored procedure name with a generic query (select * from jobs), it works fine.
Is there some sort of syntax I need to use to enter a stored procedure here? I have used "exec GetStatusReportData" and that did not work either.
Thanks,
Stuart Fox
Hi,
I am having an SQL CLR stored proc which looks like this in SQL Svr
CREATE PROCEDURE [dbo].[callspGetMessage]
@strMsg [nvarchar](4000) OUTPUT
WITH EXECUTE AS CALLER
AS
EXTERNAL NAME [GetSSBMSG].[StoredProcs].[callspGetMessage]
GO
EXEC sys.sp_addextendedproperty @name=N'AutoDeployed', @value=N'yes' ,@level0type=N'SCHEMA', @level0name=N'dbo', @level1type=N'PROCEDURE', @level1name=N'callspGetMessage'
GO
EXEC sys.sp_addextendedproperty @name=N'SqlAssemblyFile', @value=N'StoredProcs.cs' ,@level0type=N'SCHEMA', @level0name=N'dbo', @level1type=N'PROCEDURE', @level1name=N'callspGetMessage'
GO
EXEC sys.sp_addextendedproperty @name=N'SqlAssemblyFileLine', @value=14 ,@level0type=N'SCHEMA', @level0name=N'dbo', @level1type=N'PROCEDURE', @level1name=N'callspGetMessage'
When I am trying to alter the queue to attach to this procedure using following code
alter queue q1 with activation (
status = on,
max_queue_readers = 1,
procedure_name = [callspGetMessage],
execute as owner);
I am getting following error.
The signature of activation stored procedure 'callspGetMessage' is invalid. Parameters are not allowed.
Parameters to the stored proc are not allowed or am I doing anything wrong.
Any help is greatly appreciated.
Thanks,
Don
Hi,
I have a stored proc which accepts a varchar(255) as a parameter and when I call the proc using a concatenised string I get an error i.e.
-- Proc
CREATE PROCEDURE #proc_param_test
@p_param1 varchar(40) = NULL
, @p_param2 varchar(40) = NULL
AS
BEGIN
SELECT @p_param1, @p_param2
END
EXEC #proc_param_test 'test', 'test 2'
returns
---------------------------------------- ----------------------------------------
test test 2
but EXEC #proc_param_test 'test', 'test 2' + ' - the rest'
gives a Incorrect syntax near '+'. error
The solution must be a real doddle but it's a 'mare to find anywhere.
Cheers,
John
I am getting this error :Distributed transaction completed. Either enlist this session in a new
transaction or the NULL transaction. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: Distributed transaction completed. Either
enlist this session in a new transaction or the NULL transaction.have anybody idea?!
i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.
Message is like this:
Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
Hi,
i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".
my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.
Thanks in advance.
I am attempting to compile a stored proc that contains SQL statements that access databases across different SQL servers. I am getting the following error:
"Heterogeneous queries require the ANSI_NULLS and ANSI_WARNINGS options to be set for the connection. This ensures consistent query semantics. Enable these options and then reissue your query."
Does this mean that I need to put the necessary statements (Set ANSI_NULLS ON etc.) in my stored proc or that I need to configure my SQL Server differently somehow? I tried the former without success.
Thanks.
I have one drop and create procedure script in one sql session and execute the procedure in other session. Now when i am compiling the procedure in first session, it gets completed successfully.
Now when i move to other session and try to execute the procedure, it gives me error saying :
"Invalid column name 'ColumnName'."
Now when I execute the procedure in same session in which procedure was compiled, it runs successfully. Once run, I go back to my other session and it runs again.
Hi All,Quick question, I have always heard it best practice to check for exist, ifso, drop, then create the proc. I just wanted to know why that's a bestpractice. I am trying to put that theory in place at my work, but they areasking for a good reason to do this before actually implementing. All Icould think of was that so when you're creating a proc you won't get anerror if the procedure already exists, but doesn't it also have to do withCompilation and perhaps Execution. Does anyone have a good argument fordoing stored procs this way? All feedback is appreciated.TIA,~CK
View 3 Replies View Related