Transaction Log Failed To Auto Extend
Sep 6, 2001
Hi
Had a weird error yesterday, can anybody shed any light on it.
I got the following error in a SQL 7(sp2) database.
'The log file for database 'IT2PROD' is full. Back up the transaction log for the database to free up some log space..
Error: 9002, Severity: 17, State: 2'
The Transaction Log has unrestricted file growth and auto grow file set and the disk has over 20gb of free space.
The only explanation I can think of is that the Log tried to extend during the hourly backup. Would this cause the above error ??? The backup file is usually about 80mb but was over 300mb when this happened.
Any ideas ????
Thanks in advance
Gary
View 4 Replies
ADVERTISEMENT
May 12, 2004
Here's the situation:
I want to automatically send someone an email with Licensing information. I save the license information in SQL with a EmailSent field that will have the date when the email is sent. But, I want to only make the update to the licenses table if the email is sent correctly/successfully. I currently use stored procedures for all upates to the database. But I don't use sql server's email facilities, rather I am emailing from C# code with the SmtpMail class. Sometimes wel will be mailing and saving a single license. Other times we will mail multiple licenses in the same email causing us to have to update multiple records in our Licenses table.
As far as I see it, here are my options:
1. Use automatic (COM+) transactions to call the SendEmails method and the License.Save method together. Write a Seperate SaveMultipleLicenses method.
2. Call License.Save or SaveMultipleLicenses method without updating the email sent field. Send the email. If it is successful update the email sent field.
Basically, I would like to know the best way to include the email methods within my transaction to update the database becuase we don't want to save a license (thereby indicating the customer has a license) unless the email is sent successfully.
Any advice would be greatly appreciated.
John Downing
View 3 Replies
View Related
Oct 8, 2006
Hi,I recently installed VS Web Developer Express Ediition and SQL Server Express and I'm doing the How To tutorials and I can't finish the basic data access walkthrough:http://msdn2.microsoft.com/en-US/library/tw738475.aspxBecause I get an error like this (link for complete error below): An attempt to attach an auto-named database for file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData est.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.Exception Details: System.Data.SqlClient.SqlException: An attempt to attach an auto-named database for file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData est.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.Source Error:An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.http://pastecode.com/6196When I am setting up the data source for the gridview tool, everything works fine and the test query works fine, but then when I try to actually test the output in the browser with Cntrl+F5 I get this error. I have been trying for 48 hours to find a solution on my own. I have googled, I have searched everything and I just am at a point where I think I need to ask someone for help. Please help.
View 6 Replies
View Related
Jan 23, 2006
Hi
I have a problem when I want to open a page with the database record. This page is created in Visual Web Developer 2005 Express. When I try to open a page I get the following error message even though the connection between the database is ok:
An attempt to attach an auto-named database for file C:InetpubwwwrootmembershipApp_Dataaspnetdb.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An attempt to attach an auto-named database for file C:InetpubwwwrootmembershipApp_Dataaspnetdb.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
I have a computer with Windows XP Professional running IIS 5.1 and ASP.NET 2.0. Also I have SQL Express on my machine. Does any one know how to resolve it.Thanks
View 4 Replies
View Related
Oct 9, 2006
Hi,
I recently installed VS Web Developer Express Ediition and SQL Server Express and I'm doing the How To tutorials and I can't finish the basic data access walkthrough:
http://msdn2.microsoft.com/en-US/library/tw738475.aspx
Because I get an error like this (link for complete error below):
An attempt to attach an auto-named database for file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData est.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An attempt to attach an auto-named database for file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData est.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
http://pastecode.com/6196
When I am setting up the data source for the gridview tool, everything works fine and the test query works fine, but then when I try to actually test the output in the browser with Cntrl+F5 I get this error.
I have been trying for 48 hours to find a solution on my own. I have googled, I have searched everything and I just am at a point where I think I need to ask someone for help.
Please help.
View 3 Replies
View Related
Sep 27, 2007
Hi,
I am using SQL server 2000 and I created a maintenance plan. I started the jobs manually for the first time to see if everything will do as it's supposed to do before the scheduel takes place.
The DB backup are successful. When I start the Transaction Log backup job it returns failed. But when I look on the actual server ine the default directory the transaction logs are there with the current date and time.
Why do I always get a failed message. It says in the job history - The job failed. The job was invoved by user xxxxx. The last step to run was step 1(step 1).
Does anyone have an idea why I get this message. Also it says that is notified me by net send and it never does.
View 13 Replies
View Related
Feb 6, 2000
SQL 7 SP1 NT 4.0 SP5
I created a backup plan for transaction logs only to run every 30 minutes. It works great for all databases except the Master and my main database scdb_v2.
The routine backups up the other 3 databases with no issue.
Why is this happening ?
Thanks,
Craig Somberg
mailto:csomberg@stageone.com
View 3 Replies
View Related
Mar 9, 2004
Hi all,
SQl server 7
I have a job to run every six hours to take the transaction log backup.
but the job has failed.
when viewed through view job history its giving the below error msg.
sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
I tried starting the job but its failing with the same error msg.
pls help.
TIA
View 8 Replies
View Related
Apr 12, 2004
Hi All,
Greetings,
SQL Server 7,
I have scheduled transaction log backup for every 6 hours.
the scheduled job ran as per scheldue at 12pm but its giving error
The job failed. The Job was invoked by User comcreation. The last step to run was step 1 (Step 1).
sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
there is enough space in the drive where transaction log backup
is stored
Please help me.
View 8 Replies
View Related
Aug 16, 2006
Hi Greeting,
Sql sever7
OS winNT
We have scheduled transaction log backup for user database to run every one hour. Now the transaction has failed. it gives out put
[12] Database oas: Delete Old Backup Files...
Unable to delete file E:mssql7 logsoasoas_tlog_200608111300.TRN. 0 file(s) deleted.
When we try to delete the file manully, we get alert message "can not delelte the file as it is in use."
Please suggest how to solve this.
Awating for reply
Thanks in Advance
Adil
View 1 Replies
View Related
Mar 27, 2008
Any thoughts as to why I get this error, every hour. How do I fix it?
Be gentle I'm a SQL novice.
Error reported in the Application Event Log.
Package "Hourly Transaction Log" failed.
OS: Windows Ser_2003_sp1
Source: SQLISPackage
Category: None
Type: Error
Event ID: 12291
File Name dtsmsg.rll
File Version: 2005.90.3042.0
Product Name: Mic SQL Server.
Product Version: 9.0.3042.
Time 3:00:01 PM
Type: Error
View 4 Replies
View Related
Aug 11, 2002
Hi,
My application returns the following error when a SQL call is made during a transaction log backup.
Cannot open database requested in login 'login_name'. Login fails.
Has anyone come accross this problem before? or maybe worked around it?
Cheers
Luke
View 1 Replies
View Related
May 28, 2014
I have a publication on Sql Server 2012 that uses transactional replication to 7 subscribers (these are a mix of Sql Server 2008R2 and Sql Server 2012). Last night I scheduled the Snapshot job to run to "re-publish" the database to the subscribers. I had a few new table to push down. Unfortunately the snapshot job became the deadlock victim. Now updates to the publisher are not being sent to the subscribers.
Short of rerunning the snapshot job, is there a way to repair the replication so the updates to the publisher are pushed to the subscribers? The "re-publish" can only be run overnight when there is very little impact to users.
Bill Soranno
MCP, MCTS, MCITP DBA
Database Administrator
Winona State University
Maxwell 143
"Quality, like Success, is a Journey, not a Destination" - William Soranno '92
View 0 Replies
View Related
Aug 27, 2006
I get the following error in the SQL ErrorLog file and in the Event Viewer when using a J2EE web application deployed on BEA WLS 8.1sp5 using the Weblogic JDBC Type4 XA driver with MSSQL Server 2000 SP4
Enlist of MSDTC transaction failed: XACT_E_NOTRANSACTION.
View 2 Replies
View Related
Mar 24, 2008
Hello-
A customer has reported getting the following excpetion in our logs, and I have never seen it before and wanted to see if there was any insight you could provide to understand when you throw this exception.
The process is a "purging" process- it just executes a sequence of DELETE statements that should be fairly simple (delete a number of records from a table and CHECK some constraints, no cascading), after the sequence it commits. All of this occurs on the same connection. We use c3p0 for connection pooling.
Here is the exception:
2008-03-22 08:30:08,699 WARN impl.NewPooledConnection : [c3p0] A PooledConnection that has already signalled a Connection error is still in use!
2008-03-22 08:30:08,699 WARN impl.NewPooledConnection : [c3p0] Another error has occurred [ com.microsoft.sqlserver.jdbc.SQLServerException: The server failed to resume the transaction. Desc:9f00000002. ] which will not be reported to listeners!
com.microsoft.sqlserver.jdbc.SQLServerException: The server failed to resume the transaction. Desc:9f00000002.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(Unknown Source)
at com.microsoft.sqlserver.jdbc.IOBuffer.processPackets(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.doConnectionCommand(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection$ConnectionCommandRequest.execute(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeRequest(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectionCommand(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.rollback(Unknown Source)
at com.mchange.v2.c3p0.impl.NewProxyConnection.rollback(NewProxyConnection.java:855)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.hibernate.jdbc.BorrowedConnectionProxy.invoke(BorrowedConnectionProxy.java:50)
at $Proxy15.rollback(Unknown Source)
at
View 3 Replies
View Related
Aug 22, 2007
In a high load asp.net environment, I am getting an error. The transation active in this session has been committed or aborted by another session.Here is the code , I am getting error. 1 object returnObject = null;
2 SqlTransaction sqlTrans = null;
3 try
4 {
5 //Getting new SqlConnection
6 comm.Connection = GetConnection();
7 //Opening connection
8 OpenConn(comm.Connection);
9 //beginning transaction
10 sqlTrans = comm.Connection.BeginTransaction( IsolationLevel.ReadCommitted );
11 //setting transaction to SqlCommand object
12 comm.Transaction = sqlTrans;
13 //executing operation
14 returnObject = comm.ExecuteScalar();
15 //trying to commit.
16 sqlTrans.Commit();
17
18
19 }
20 catch (SqlException sex)
21 {
22 if (sqlTrans != null)
23 {
24 sqlTrans.Rollback();
25 }
26 }
27 finally
28 {
29 comm.Connection.Close();
30 }
Could you please explain , am I doing smthg wrong ?
View 5 Replies
View Related
Jul 25, 2007
I want to use Transaction(MS DTC) in SSIS package across domain. It's working fine if both the servers are in Corpnet microsoft domain but failing it one of the server at extranet microsoft domain. I did all the required settings for MS DTC service to run for distrubuted transaction and in SSIS package did the "TransactionOption" property for the container object to "Required" and for all inner tasks to "Supported". Is it possible or a Security voilation which won't allow to do through SSIS package.
Example: I have a database on Extranet server and a database at Corpnet Server.
Sql Job will pull the data from Extranet Database to Corpnet database through SSIS package and update back to Extranet database. Job will reside on Corpnet server.
SSIS package is failing with the error message: The AcquireConnection method call to the connection manager "<Connection Manager name>" failed with error code 0xC0202009.
Any special setting do we require for this. I did the following setting on both the servers:
Ø MS DTC should run on both the servers under €œNetwork Service€?
Ø Set the following on both the servers(ExtranetCoptnet) to run on a Distributed Transaction:
§ Go to "Administrative Tools > Component Services"
§ On the left navigation tree, go to "Component Services > Computers
§ €œMy Computer" (you may need to double click and wait as some nodes
need time to expand)
§ Right click on "My Computer", select "Properties"
§ Select "MSDTC" tab
§ Click "Security Configuration"
§ Make sure you check "Network DTC Access", "Allow Remote Client",
"Allow Inbound/Outbound", "Enable TIP"
§ The service will restart
Note: If I will chage the Extranet server to Corpnet then it's working file for me.
View 1 Replies
View Related
Aug 3, 2007
Does anybody know what it means?
The context is: a package with a single Data Flow finishes with this error: [Connection manager "xxx"] Error: The connection manager failed to defect from the transaction.
All components inside the data flow reports a successfull green status, however the DataFlow Task remains yellow for a long time, when suddenly the package stops with the above message. Another information is that the table remains locked during package execution (a select on that table does not complete...). This is a serious issue, and I couldnt find any relevant information about that. Thanks in advance.
View 4 Replies
View Related
Apr 18, 2007
Hi,
We recently migrated our application from SQL Server 2000 to SQL Server 2005 and we also migrated from WAS5 to WAS6.
We are getting the following exception when we call any of the stored procedures.
The server failed to resume the transaction. Desc200000003.
Basically we call these stored procedures frequently using the Java thread scheduler.
We didnt face any problem when we use IBM drivers
I guess this is the problem with the drivers.We use JDBC 2005 driver Version 1.1.
But we didnt face this problems when we use JDBC 2000 driver when we used to connect to SQL Server 2000
The Microsoft says that it has fixed the date problems as well as the transaction problems in the version 1.1.But still are facing the issues.
Can anyone of you please help me in getting the solution for the same?
View 4 Replies
View Related
Mar 6, 2007
HelloIn my website I have a textbox to search some products, but it would like to extend my search-function so that it could find special characters. For example:When I search Mexico, I would like to find México. Is there an easy way to do this?Thanks in AdvanceWesley
View 1 Replies
View Related
Oct 4, 2007
I have a database that is in production. It is almost full. How would I go about extending the size of it? Would it involve an outage?
View 4 Replies
View Related
Jun 8, 2001
Hi All,
I'm rather new to the MS SQL Server development in general and especially to its data security architecture and features - I'd like to know if it is possible for end-user to retrieve/update(!?) the data using a SP which executes on a table for which she/he doesn't have any privileges.
TIA,
Shamil
View 4 Replies
View Related
Jul 8, 2015
I found this script for dependencies and want to extend it:
I want to add the obj_typ (U, FN, P, V, TR...) for the dependency
How can I do this?
Here is the script:
WITH DepTree (referenced_id, referenced_name, referencing_id, referencing_name, NestLevel, obj_type )
AS
(
SELECT
o.[object_id] AS referenced_id ,
o.name AS referenced_name,
[Code] ...
View 3 Replies
View Related
Jun 27, 2007
Is there any way to extend the Alter Procedure command or fire somekind of event when it is executed in SQL Server 2005?
Thanks,
David
View 9 Replies
View Related
Jun 6, 2007
Hi,
I'm totally new to SSRS2005 and I was wondering if I could extend the existing report items. For instance, I'd like to add a few extra properties to the textbox report item. I tried wrting a custom Textbox control that inherits from System.Windows.Forms.Textbox. When I imported the dll in VS, the new textbox showed up in the toolbox, but it was grayed out.
Any idea what I'm missing here?
Thanks,
Phil
View 3 Replies
View Related
Jan 14, 2008
Howdy folks, first time poster.
In a UDF, how is the best way to extend a query with additional clauses based on expressions? The user input here is used to refine the basic query by introducing additional clauses. Is there something like the following?
-- The basic query
SELECT column
FROM table
WHERE clause
-- Additional clause, only appended to query
-- if expression evaluates to true
IF @parameter <> default_value
BEGIN
AND additional_clause
END
Right now I'm using CASE like the following, but it necessarily makes the query longer. Is there a more efficient way?
-- The basic query
SELECT column
FROM table
WHERE clause
-- Additional clause, should only effect result
-- set when the parameter is not default_value
AND table.column =
CASE @parameter
WHEN default_value THEN
-- identity, table.column=table.column,
-- should have no effect other than just a long query
table.column
ELSE
@parameter
END
View 8 Replies
View Related
Jun 2, 2006
Hi,
I have a number of functions which I'd like to be able to add to the expression language to avoid having to use numerous script components, but I can't find any information on how this is possible. Can anyone provide any advice, please?
Thanks in advance,
Lawrie
View 1 Replies
View Related
Mar 4, 2011
We had a siutation last night in our production environment that forced us to revert back to an earlier version of the database (before a major code rollout that failed). After restoring the days full backup (with NORECOVERY), and then restoring a DIFF backup (FULL RECOVERY and had checked Preserve Replication Settings)...the transaction replication failed.
Message #1
The replication agent has been successfully started. See the Replication Monitor for more information.
Message #2
2011-03-04 15:07:17.566 Copyright (c) 2008 Microsoft Corporation
2011-03-04 15:07:17.566 Microsoft SQL Server Replication Agent: logread
2011-03-04 15:07:17.566
2011-03-04 15:07:17.566 The timestamps prepended to the output lines are expressed in terms of UTC time.
2011-03-04 15:07:17.566 User-specified agent parameter values:
[code]....
I've tried reinitializing the publication/subscription and while that took brand new snapshots and copied it over to the replicated data server, it did not fix the problem.I read from a different post that I could try running "sp_replrestart" but that ran for about a half an hour and didn't appear to do anything but fill up our log files...did I not wait long enough?
The only thing I know to do at this point is to drop the publication on the production server and rebuild it completely (and with all the tables we're replicating that would take quite a bit of time.
View 9 Replies
View Related
Mar 2, 2005
Hello,
I am managing a sqlserver 6.5 database in my company. I get the message that the datafiles should be expanded but whenever I try to expand it the following message appears:
Could not find enough space on disks to extend the database. Meanwhile, I have about 6 gigabytes free space on my disks. Please help me out.
Thanks,
Albert
View 2 Replies
View Related
Jun 1, 2015
SQL 2014 I've inherited a db that has several partitioned tables. They are partitioned by month. We're approaching the last partition, 11-30-2015, so we need to extend the tables. My question is how do I do this? There are Partition Schemes and Partition Functions setup at the db level. I've figured out how to ALTER those. Next I go to a table that I know is partitioned, right-click Storage and select Manage Partitions.Â
My only option is to "create a staging table for partition switching". Not knowing what switching is, I'm not sure if this is what I want to do. All I want to do is add new partitions to the table - and remove some of the old ones since they are empty due to archiving of data.
So, what is the proper steps to adding new partitions to a table that is already partitioned?
View 4 Replies
View Related
Nov 7, 2007
Hi all,
Does anyone know how to setup the "table details" to take up all the space in a page (extend the boarder to the end of the page) even there is only one record in the table details?
Normally, for example, if you got a table in a report, if the table has only one record, the boarder of table will only take up maybe 1/4 of the page space (header, 1 line details, footer). if the table has 5 records, it may take up half of the page, but the boarder of table neven extend to the end of the report and i wwant it happen!!!!!!! Thank you.
Cheers,
Bryan
View 8 Replies
View Related
Oct 27, 2006
Using MS Access as a front end and SQL as a back end how can i get past the 4000 character limmit per table?
View 9 Replies
View Related
