Transaction Log Format

Jan 5, 2006

Is there any documentation that shows the format of the transaction log file? Are there any example programs that show how to read the log file?

View 5 Replies


ADVERTISEMENT

I Need Away To Show The Pending Transaction From Transaction Replication In A User Friendly Format.

Jul 11, 2007



I want to list out the pending transaction for transaction replication by publication.



Help needed.

View 1 Replies View Related

Error 8525: Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.

May 31, 2008

Hi All

I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.

If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.

I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.

set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN


It's got me stumped, so any ideas gratefully received.Thx

View 1 Replies View Related

SSIS, Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.

Feb 22, 2007

I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.

for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.

I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.

if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.

and

Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.

Please help me it's very urgent.

View 3 Replies View Related

Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.

Feb 6, 2007

I am getting this error  :Distributed transaction completed. Either enlist this session in a new
transaction or the NULL transaction. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: Distributed transaction completed. Either
enlist this session in a new transaction or the NULL transaction.have anybody idea?!

View 1 Replies View Related

Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.

Dec 22, 2006

i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.

Message is like this:

Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.

View 8 Replies View Related

Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction. (HELP)

Jan 8, 2008

Hi,

i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".

my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.



Thanks in advance.


View 2 Replies View Related

Reporting Services :: Exporting SSRS Output To Word Format And PDF Format Differs

Aug 19, 2015

I have created SSRS report which has many overlapping objects, the output in PDF format seems to good but in word format it is not giving the required output.

View 5 Replies View Related

Conversion Of Date From Legacy Systems With 7 And 6 Digit Format To DD/MM/YYYY Format

Nov 19, 2014

We are migrating data from old DB2 systems to sql server 2012, the DATE FORMAT in those systems is in decimal format with 7 digits. CYYMMDD format.

I need to convert this into DD/MM/YYYY format.

View 9 Replies View Related

Date In String Format Has To Be Changed Datetime Format

Jun 15, 2005

I have date coming to one page as a string in the following format"May 4 2005 12:00AM"
I need to query one of my tables using this date in combination of other nondate values. How can I convert this date into valid sql server datetime format before I query a database tables
Please help
 

View 3 Replies View Related

Transact SQL :: How To Format A String In A Format Coming From A Table

Jun 4, 2015

I have a table which stores date-of-birth in varchar 19861231(yyyymmdd). A view takes this data. I want to store this date as mmddyyyy in the view. How can we achieve this?

View 18 Replies View Related

Converting Csv Files From One Format To Another Format With Differing Columns

Dec 19, 2007

Hi,


I have a set of csv files and a set of Format Specification files for each of the csv files. I need to convert the csv files into another format of csv files as specified in the Format Specification files. All the columns of the input csv files do not have a mapping with the columns of the output csv files. How can I achieve this using SSIS ? This is an urgent requirement. Please reply asap. Thanks.

View 1 Replies View Related

How To Format Leave Detail Into Tabular/pivot Format?

Jun 16, 2006

Hello Expert!

I need help to I translate this data...

Table "LeaveDetail"

StaffNo | StartDate | EndDate | LeaveType |
1 | 23/04/2006 | 26/04/2006 | AL |
2 | 24/04/2006 | 25/04/2006 | MC |
3 | 26/04/2006 | 27/04/2006 | EL |
1 | 30/04/2006 | 02/05/2006 | EL |

Into this format...

|Apr|Apr|Apr|Apr|Apr|Apr|Apr|Apr|May|May|May|May|
StaffNo |23 |24 |25 |26 |27 |28 |29 |30 |01 |02 |03 |04..
---------------------------------------------------------
1 |AL |AL |AL |AL | | ... |EL |EL |EL |
2 | |MC |MC | | |
3 | | | |EL |EL |

Parameter:
Date From e.g. 23/04/2006 to 23/05/2006

Using only query statement...

Is this possible??

TIA

Regards.

View 7 Replies View Related

Adapter To Convert CSV Format File To SAP IDOC Format

Nov 16, 2006

Hi All,

I am stuck at one place, where I have to convert CSV format file data into SAP IDOC format file. In SSIS we don't have any such SAP adapter (though we have .NET Data Provider for mySAP suite [SSIS SAP Adapter] but this is still not fully supported by Microsoft, plus it doesn't have feature to convert data into IDOC format) that can do this. Can someone here please provide me some pointers on any third party adapters available in market to do this job or if anyone has already developed some custom approach to achieve this task?


Your quick response on this is highly appreciated.

Regards,

Kuldeep Chauhan

View 2 Replies View Related

SQL Server Admin 2014 :: Restore Lost Transaction From Transaction Log File

Jun 10, 2015

I have Full database backup upto previous day and transaction logfile of Today transaction. my database has crashed. I have restored previous day's Full backup. I have faced difficulty to restore today's transaction from today's transaction log. What are the steps to restore full database back and one day's transaction log file. Note: there is no differential database backup and transaction backup.

View 8 Replies View Related

TRANSACTIONS In SSIS (error: The ROLLBACK TRANSACTION Request Has No Corresponding BEGIN TRANSACTION.

Nov 14, 2006

I'm receiving the below error when trying to implement Execute SQL Task.

"The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION." This error also happens on COMMIT as well and there is a preceding Execute SQL Task with BEGIN TRANSACTION tranname WITH MARK 'tran'

I know I can change the transaction option property from "supported" to "required" however I want to mark the transaction. I was copying the way Import/Export Wizard does it however I'm unable to figure out why it works and why mine doesn't work.

Anyone know of the reason?

View 1 Replies View Related

Analysis :: Find Amount Distribution Across Different Transaction Types Under Spend Transaction

Jul 27, 2015

I created a Calculated measure in cube something like this : ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount]). To get only spend transactions. Now, I want to slice this measure with same hierarchy to find the amount distribution across different transaction types under spend transaction. But this query behaving like the measure doesn't have relation with measure.

you can think this as below query:
WITH
MEMBER SPEND AS ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount])
SELECT NON EMPTY {SPEND} ON 0
,NON EMPTY ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent]) ON 1
FROM [CUBE]

View 6 Replies View Related

How Do I Make Use Of Begin Transaction And Commit Transaction In SSIS.

Jun 1, 2007

Hi



How do I make use of begin transaction and commit transaction in SSIS.

As am not able to commit changes due to certain update commands I want to explicitly write begin and commit statements. but when i make use of begin and commit in OLEDB commnad stage it throws an error as follows:

Hresult:0x80004005

descriptionyntax error or access violation.



its definately not an syntax error as i executed it in sql server. also when i use it in execute sql task out side the dataflow container it doesnt throw any error but still this task doesnt serve my purpose of saving/ commiting update chanages in the database.



Thanks,

Prashant

View 3 Replies View Related

Date Format From Sql Without Millisecond ----12 Hr Format

May 4, 2008

dear all can anybody help me soon....
i am using visual studio 2005 webapplication based on  sql server 2005 database.
i can get one date from sql using one query.
I am selecting my field based on following code CONVERT(varchar, Oman.Positions.Datum, 9) AS LastUpdate
this case my output is May  4 2008  3:19:45:000AM.....
this output is correct but from this output i want to avoid millisecond part.
ie i want the output like May  4 2008  3:19:45 AM....
how i can do this
regards
 

View 4 Replies View Related

Sql2005:Cannot Use SAVE TRANSACTION Within A Distributed Transaction

Oct 10, 2005

Error returned when trying to commit the transaction to a database that is a replication distributor. (sql2005 ctp16)

View 10 Replies View Related

Problem With SSIS Transaction...Transaction Scope

Jun 1, 2006



Hi,

I am having some problem with SSIS transaction. Eventhought I tried to imitate the concept that Jamie presented at http://www.sqlservercentral.com/columnists/jthomson/transactionsinsqlserver2005integrationservices.asp

. My workflow is as followed

*********************************
For Each ADO.Record in Oracle (transaction=not supported)

If (Certain_Field_Value = 'A')


Lookup Data in SQL DB with values from Oracle (transaction=not supported)

DO Sequence A (Start a Transaction , transaction=required)


INSERT/UPDATE some records in SQLDB(transaction=supported)
Finish Sequence A ( transaction should stop here)
UPDATE Oracle DB ( Execute SQLTask, transaction=not supported)
If (Certain_Field_Value = 'B')


Lookup Data in SQL DB with values from Oracle (transaction=not supported)

DO Sequence B (Start a Transaction , transaction = required)


INSERT/UPDATE some records in SQLDB (transaction=supported)
Finish Sequence A ( transaction should stop here)
UPDATE Oracle DB ( Execute SQLTask, transaction=not supported)
If (Certain_Field_Value = 'C')

------------
------------
End ForEach Loop
*************************************
My requirements are that I want separate transaction for each Sequence A, B, C, etc... If Sequence A transaction fails, the other should still be continuing with another transaction.
But I am getting an error regarding the OLEDB Error in next Task (e.g in Certain_Field_Value = 'B') "Lookup Data in SQL DB with values from Oracle ", the error message is ".......Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction. ".
What is it that I am doing wrong?
Regards
KyawAM

View 12 Replies View Related

How To Convert Long Date Format To Short Date Format In Store Procedure.

Feb 1, 2008

E.g, i have a store procedure. The start date is long date (4/15/2007 3:00pm). i want to select the start date with a particular date (short date format 4/15/2006). Thanks in advance.

View 1 Replies View Related

Transact SQL :: Cast Or Convert Date In Format YYYY-MM-DD Into New Format Of MM/DD/YYYY?

Nov 27, 2015

I have a table that has a DATE field named. AccountingDate that is in the format YYYY-MM-DD. It's not a VARCHAR field. I simply want to convert this date field into the format MM/DD/YYYY and call it New_Accounting_Date.

I've played with various combinations of CAST & CONVERT but haven't been able to get it to work.

Below is my latest effort which returns the error:

Incorrect syntax near the keyword 'as'

What code would work to return a MM/DD/YYYY value for New_Accounting_Date?

Select GLBATCH.AccountingDate,
convert(GLBATCH.AccountingDate as date),101) AS New_Accounting_Date
from GLBATCH

View 11 Replies View Related

New Transaction Cannot Enlist In The Specified Transaction Coordinator

Nov 28, 2004

I'm getting this error:

The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].

http://support.microsoft.com/kb/839279 this didn't help

any suggestions?

View 3 Replies View Related

BEGIN TRANSACTION And COMMIT TRANSACTION

Oct 11, 2000

I am executing a stored procedure something like this

Create Procedure TEST
@test1
@test2
AS
BeGIN TRANSACTION ONE
SELECT...
UPDATE..
....
....

....
TRUNCATE
etc and lot of Select,update and delete statements like this
.....
COMMIT TRANSACTION ONE


The Block of code which I have b/w BEGIN TRANSACTION AND COMMIT TRANSACTION ..Will it be rolled back
if it encounters any errors in the SELECT,UPPDATE,DELETE ..statements which I have with the transaction one.
IF not How do I roll back if it encounters any erros b/w the BEGIN TRANSACTION and END TRANSACTION.

Thanks
micky

View 1 Replies View Related

New Transaction Cannot Enlist In Transaction Coordinator (was Please Help...)

Apr 18, 2005

Hi all,

In my ASP application, I've been using this code:

----------------------------------------------
dim conn, connectionstring

connectionstring= "Provider=SQLOLEDB.1; Data Source = blahblah; Initial Catalog = abc; User Id = osss; Password=xxx"

set conn = server.CreateObject("adodb.connection")
conn.open connectionstring

----------------------------------------------

It's just basically to set up the connection to the SQL server, it works on my other pages, but on a few pages, the last line (conn.open connectionstring) triggers this error:

"Microsoft OLE DB Provider for SQL Server error '8004d00a'

New transaction cannot enlist in the specified transaction coordinator. "

I've never encountered this error before and I couldn't think of any solution... please help!!!

Thanks so much,
Annie

View 2 Replies View Related

BEGIN TRANSACTION COMMIT TRANSACTION Help

Sep 24, 2007

I had thought that if any statement failed within a BEING TRANS .. COMMIT TRANS block, then all the statements would be rolled back. But I am seeing different behavior (SQL Server 2000 8.00.2039)

For instance, run these statements to set up a test:
--DROP TABLE testTable1
--DROP TABLE testTable2
CREATE TABLE testTable1 (f1 varchar(1))
CREATE TABLE testTable2 (f1 varchar(1))
CREATE UNIQUE INDEX idx_tmptmp ON testTable1 (f1)
insert into testTable1(f1) values ('a')

So table testTable1 has a unique index on it..

Now try to run these statements:

--DELETE FROM testTable2
BEGIN TRANSACTION
insert into testTable1(f1) values ('a')
insert into testTable2(f1) values ('a')
COMMIT TRANSACTION

SELECT * FROM testTable2


..the first insert fails on the unique index.. but the second insert succeeds. Shouldn't the second insert roll back? How can I make two operations atomic?

View 8 Replies View Related

Why Transaction Gets Promoted To Distributed Transaction

Feb 1, 2007

Hi,On My local SQL server I have added a linked server to another SQLserver (remoteserver) in another Windows NT Domain.When I run this codeselect count(*) from remoteserver.mosaics.dbo.LocationThis works fine.However when I usebegin transactionselect count(*) from remoteserver.mosaics.dbo.LocationIt errors out saying thatThe operation could not be performed because the OLE DB provider'SQLOLEDB' was unable to begin a distributed transaction.New transaction cannot enlist in the specified transactioncoordinator. ]OLE DB error trace [OLE/DB Provider 'SQLOLEDB'ITransactionJoin::JoinTransaction returned 0x8004d00a].My question is even though I am just reading data from theremoteserver, why does the local transaction get promoted to adistributed transaction.Any help will be grately appreciated.TIA...Rohit

View 2 Replies View Related

New Transaction Cannot Enlist In The Specified Transaction Coordinator

May 18, 2007

Hi



I am trying transfer data from Back Office Server to Head Office using DTS. It is failing in few stores, rest of the store it is OK

Configuration

Head office :Windows 2003 SP1 and Sql Server 2000 SP3

Failing Store:Windows 2003 SP2 and SQL SERVER 2005

Successful Store :Windows 2003 SP2 qnd SQL SERVER 2000





At Store: Setting for MSDTC

Log on Account for MSDTC Service : Network Service

Network DTC Access = True

Allow Inbound = True

Allow Outbound = True

No Authentication Required = True

TurnOffRPCSecurity = 1

port Ranges for RPC = 5000- 5100



The error Message is as follows:

(Microsoft Data Transformation Services (DTS) Package (8004d00a): Connection 'Head Office SQL Server' for Task 'DTSTask_DTSDataPumpTask_1' does not support joining distributed transactions or failed when attempting to join. Unable to enlist in the transaction.
) (Microsoft OLE DB Provider for SQL Server (8004d00a): New transaction cannot enlist in the specified transaction coordinator. )



If any one can help me, that will be great!!! Thanks in advance



Shiny

View 3 Replies View Related

SQL's America Date Format Conflict With Australian Date Format

Nov 14, 2006



Hi

I am trying get my VB6 application to insert a record into a table (SQL Express) which has a datetime column but it would not process if the data format is differ to *American Date format*.

The date() function in VB returns 15/11/2006 which is in Australian Date format (DD/MM/YYYY) according to my setting in "Reginal and Lanuage Option-> Locale 0> English (Australia)" setting.

I get the following error:

Msg 242, Level 16, State 3, Server KITSQLEXPRESS, Line 1
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
The statement has been terminated.

My computer's locale is set to English (Australia) and I expect the datetime format would follow what is set in system locale


I've read an article somewhere on the net about how SQL 2005 eliminate the confusion of date conversion when read/write datetime records into a table...but it seems to me that it is still as in-flexible as MS Access


Is there a setting in the database that takes care of it?

Thanks

View 6 Replies View Related

Transaction Count After EXECUTE Indicates That A COMMIT Or ROLLBACK TRANSACTION Statement Is Missing. Previous Count = 1, Current Count = 0.

Aug 6, 2006

With the function below, I receive this error:Error:Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 1, current count = 0.Function:Public Shared Function DeleteMesssages(ByVal UserID As String, ByVal MessageIDs As List(Of String)) As Boolean        Dim bSuccess As Boolean        Dim MyConnection As SqlConnection = GetConnection()        Dim cmd As New SqlCommand("", MyConnection)        Dim i As Integer        Dim fBeginTransCalled As Boolean = False
        'messagetype 1 =internal messages        Try            '            ' Start transaction            '            MyConnection.Open()            cmd.CommandText = "BEGIN TRANSACTION"            cmd.ExecuteNonQuery()            fBeginTransCalled = True            Dim obj As Object            For i = 0 To MessageIDs.Count - 1                bSuccess = False                'delete userid-message reference                cmd.CommandText = "DELETE FROM tblUsersAndMessages WHERE MessageID=@MessageID AND UserID=@UserID"                cmd.Parameters.Add(New SqlParameter("@UserID", UserID))                cmd.Parameters.Add(New SqlParameter("@MessageID", MessageIDs(i).ToString))                cmd.ExecuteNonQuery()                'then delete the message itself if no other user has a reference                cmd.CommandText = "SELECT COUNT(*) FROM tblUsersAndMessages WHERE MessageID=@MessageID1"                cmd.Parameters.Add(New SqlParameter("@MessageID1", MessageIDs(i).ToString))                obj = cmd.ExecuteScalar                If ((Not (obj) Is Nothing) _                AndAlso ((TypeOf (obj) Is Integer) _                AndAlso (CType(obj, Integer) > 0))) Then                    'more references exist so do not delete message                Else                    'this is the only reference to the message so delete it permanently                    cmd.CommandText = "DELETE FROM tblMessages WHERE MessageID=@MessageID2"                    cmd.Parameters.Add(New SqlParameter("@MessageID2", MessageIDs(i).ToString))                    cmd.ExecuteNonQuery()                End If            Next i
            '            ' End transaction            '            cmd.CommandText = "COMMIT TRANSACTION"            cmd.ExecuteNonQuery()            bSuccess = True            fBeginTransCalled = False        Catch ex As Exception            'LOG ERROR            GlobalFunctions.ReportError("MessageDAL:DeleteMessages", ex.Message)        Finally            If fBeginTransCalled Then                Try                    cmd = New SqlCommand("ROLLBACK TRANSACTION", MyConnection)                    cmd.ExecuteNonQuery()                Catch e As System.Exception                End Try            End If            MyConnection.Close()        End Try        Return bSuccess    End Function

View 5 Replies View Related

Transaction Scope - The Operation Could Not Be Performed Because OLE DB Provider SQLNCLI For Linked Server XXX_LINKED_SERVER Was Unable To Begin A Distributed Transaction. OLE DB Provider SQLNCLI&a

May 15, 2008

Hello, I've a problem with a software developed in C# with the framework 2.0. This is the error I receive : The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "XXX_LINKED_SERVER" was unable to begin a distributed transaction. OLE DB provider "SQLNCLI" for linked server "XXX_LINKED_SERVER" returned message "No transaction is active.". If I try directly to restart the process, it works fine. Is there someone who can help me ? This is the process 1. In C# --> Call of a Query : select from the linked server (db in sql 2005) and insert into a table SQL 2005 2. In the C# --> using (TransactionScope scope = new TransactionScope()) and insert in a table in SQL 2005 which is link server Thank in advance.

View 1 Replies View Related

Converting SQL Date Format To Oracle Date Format

May 28, 2008

Hi,

I have a column date in my database which I should send it to Oracle database. The Date format in Oracle is number. I don’t know how should I convert the date to that format?
Example :
SQL FormatOracle Format
02/16/05 105046

Thanks.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved