Transaction Log Full - Msg 9002, Level 17, State 2 - SQL Server 2005 Standard
Jul 6, 2007
Hi,
I have database with unlimited growth in Data with 2MB growth and Log File with 1MB growth. The continuous data is inserted with min 20KB per minute. We struct with following error and Log file size is too large (85GB) than Data file(20GB). Now server is not allowing to take backup as diskspace is not available.
Msg 9002, Level 17, State 2, Procedure DumpData, Line 10
The transaction log for database '%DB' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
status at SYS.DATABASES:
log_reuse_wait log_reuse_wait_desc
-------------- ------------------------------------------------------------
2 LOG_BACKUP
Please help me to resolved the issue and let me know hints to shrink LOG file. Data inserted are using ADO applications that uses some insert/select stored procedures that does not have begin transaction-Commit Transaction block as appliction issues the Commit over connection object.
Regards,
Pavan
View 7 Replies
ADVERTISEMENT
Jul 20, 2005
I have a stored procedure that takes 18 hours to complete. SometimesI get the below error message when I run the stored procedure.'Server : Msg 9002, Level 17, State 6, Line 1 The log file fordatabase 'Customer' is full. Back up the transaction log for thedatabase to free up some log space.'.I checked my log file and it is not full. And I don't know why I amgetting this message. Any help is appreciated.Thanks,Anjula
View 2 Replies
View Related
Jan 21, 2008
I am getting this error in my SQL Server 2005 server.
It is saying that one of my databases transaction log file is full, but I am a little confused.
I googled this the other day and found a threat here, but I was having problems with the search function. I wasn't getting anything back. Hate to repost.
Anyway, the DB is in simple recovery mode. The disk that it is on has plenty of space; 80+gigs.
I cannot recall the T-SQL command to be able to query of sys.databases to find infor on 'log_reuse_wait_desc' (I am really new to SQL).
Does anyone have some suggestions and help? Can someone help me with the t-sql command to use against sys.databases?
Thanks.
JW
View 12 Replies
View Related
Apr 26, 2007
I'm getting a specific error when i try to run a .sql script for a Custom TableProfileProvider ,when i Parse the .sql file Commands execute perfectly. But when i actually "Execute" the .sql script i get the following error. It will produce the table but with "Errors" which dosn't do anyone any good to have errors in the table. I even used the Sql Server Surface Area Configuration to add a new Administrator with the name listed below (WYATT-PCWyatt), that didnt help either..Here is part of the Sample Scheme the problem lies in the [YOURMACHINENAMEASPNET]
Server = WYATT-PCSQLEXPRESS
Computer Name = Wyatt-PC
OS: Windows Vista Home Premium
===========================================================
use TableProfileProviders
go
--
--grants on ASP.NET stored procedures and tables used by the custom providers
--
grant EXECUTE on dbo.aspnet_Applications_CreateApplication to [YOURMACHINENAMEASPNET]
grant EXECUTE on dbo.aspnet_Users_CreateUser to [YOURMACHINENAMEASPNET]
grant SELECT on dbo.aspnet_Users to [YOURMACHINENAMEASPNET]
grant UPDATE on dbo.aspnet_Users(LastActivityDate) to [YOURMACHINENAMEASPNET]
go
--drop table dbo.ProfileTable_1
--go
create table dbo.ProfileTable_1 (
UserId uniqueidentifier not null Primary Key,
FirstName nvarchar(50) null,
LastName nvarchar(50) null,
Age int null,
LastUpdatedDate datetime not null)
go
grant SELECT,INSERT,UPDATE,DELETE on dbo.ProfileTable_1 to [YOURMACHINENAMEASPNET]
go
================================================================================
Msg 15151, Level 16, State 1, Line 5
Cannot find the user 'WYATT-PCWyattASPNET', because it does not exist or you do not have permission.
How can i fix this??
View 16 Replies
View Related
Jun 23, 2000
Server: Msg 229, Level 14, State 5, Procedure sp_monitor, Line 167
EXECUTE permission denied on object 'sp_monitor', database 'master', owner 'dbo'.
How do I fix this? which roles, or permission is that? Is there a
easier way to find out solutions for these problems, as books online
does not seem to provide much help.
Thanks,
Vijay
View 2 Replies
View Related
May 13, 2008
IN THE SQL SERVER 2000 AND IN ALSO IN 2005 WHEN GOING FOR THE LOGGING IN TO THE SQL SERVER USING A PUBLIC IP, AND GIVING THE SQL SERVER AUTENTICATION IT IS GIVING THE FOLLOWING ERROR
Server: Msg 11, Level 16, State 1[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]General network error. Check your network documentation.
THE SAME ISSUE HAPPENING WITH THE ODBC CONNECTION. CAN ANYONE EXPLAIN ME WITH THE FOLLOWING ERROR
DO NOT GIVE A SUGGESTION OF REINSTALLATION, BECAUSE TRIED THAT ONE TOO
REGARDS
CHAITANYA BABU YANAMADALA
View 2 Replies
View Related
Nov 2, 2006
Hi,
Does anyone else have this error message pop up in SSMS when you try to parse sql statements:
.Net SqlClient Data Provider: Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
There was a thread back in March 2006 that mentioned this error, but the posted resolution was to install SP1. I have SP1 installed but I still get the error.
I only receive the error when I'm parsing statements, if I run the statement it's fine.
Thanks
Matt
View 8 Replies
View Related
Jun 7, 2005
Simple SQL Error Can anyone help for a new starter. Error MessageServer: Msg 209, Level 16, State 1, Line 6 Ambiguous column name 'CustomerID'.Codeselect CustomerID, ContactName, OrderId from CustomersInner Join Orders OnCustomers.CustomerID = Orders.CustomerIDDBMS = SQL Server 2000 SP 3aDatabase = NorthwindI have no idea why i receive this error
View 1 Replies
View Related
Mar 16, 2001
Hi, I would appreciate your help. I donot know why I am getting this error when I run this query :
if (select SUBSTRING(de_ftpdownload,1,CHARINDEX('.',de_ftpdow nload,0)-1)as de_ftpdownload from vendor_invoice)
<> (select stamp_number from vendor_invoice)
select 'no'
else
select 'yes'
I get this Error
Server: Msg 536, Level 16, State 3, Line 1
Invalid length parameter passed to the substring function.
----
yes
(1 row(s) affected)
I would appreciate your hlep
Al
View 1 Replies
View Related
Jun 23, 2004
Can anybody help me with this syntax?
select
PHN.N_PHN_ID 'ID',
PHN.N_PHN_AREACD 'AREAD1',
PHN.N_PHN_PREFIX 'PREFIXD1',
PHN.N_PHN_NUMBER 'NBRD1',
PHN.N_PHN_EXTENTN 'EXTD1',
PHN2.N_PHN_AREACD 'AREAD2',
PHN2.N_PHN_PREFIX 'PREFIXD2',
PHN2.N_PHN_NUMBER 'NBRD2',
PHN2.N_PHN_EXTENTN 'EXTD2'
from Donor_Visit2 DV2 RIGHT OUTER JOIN NAT_PHN_DB_REC PHN
ON DV2.COUNT_INSTID = PHN.N_PHN_INSTID
RIGHT OUTER JOIN NAT_PHN_DB_REC PHN2
ON DV2.COUNT_ID = PHN2.PHN.N_PHN_ID
order by PHN.N_PHN_ID
here is the error message:
Server: Msg 107, Level 16, State 2, Line 1
The column prefix 'PHN2.PHN' does not match with a table name or alias name used in the query.
View 1 Replies
View Related
Nov 22, 2004
Hello All,
This table was created by coldfusion and has been given all priviliges to public and I am in the public group but I still cant select from it. It gives me this error message: Server: Msg 208, Level 16, State 1, Line 1. Help!
Thanks in Advance.
View 5 Replies
View Related
Jul 18, 2007
Hi All,
I am facing a very strange problem in one of my SQL2000 instance.
Actually, In one of my 2000 instance 'A', I have linked another 2000 instance 'B' (server 'B' is running under windows authentication) and I am a member of a group (SQL_Group) and that group is listed in sysadmin of both 'A' and 'B' Instances. When I am trying to run a simple select query from server 'A' to linked server 'B'
i.e. select top 2 * from [<Server_Name> <Instance_ Name>].master. dbo.sysobjects
It is giving me an error.
Server: Msg 18452, Level 14, State 1, Line 1
Login failed for user 'sa'. Reason: Not associated with a trusted SQL Server connection.
But rest of the members of same group (SQL_Group) are able to execute this query. Can anyone please let me know why this issue is only for me even I am having the same permissions as others??
Any help will be highly appreciated. thanks a lot to all of you.
Rizwan...........
View 2 Replies
View Related
Jan 25, 2002
If we run the query below with the values of 'rml' and 'ra' it runs but if we use 'cca' and 'cc' we get this error:
Server: Msg 1101, Level 17, State 10, Line 8
Could not allocate new page for database 'TEMPDB'. There are no more pages available in filegroup DEFAULT. Space can be created by dropping objects, adding additional files, or allowing file growth.
Here is the query
Declare @Level_1 varchar(3),
@Level_2 varchar(2)
Select @Level_1 = 'cca'
Select @Level_2 = 'cc'
select distinct tblAsset.State, tblAsset.County, tblAsset.Plant, tblAsset.Account,
tblAsset.Acq_Yr, tblAsset.Acq_Pd, tblAsset_Book.Cost_Original,
tblCounty_Names.County_Name, CER..tblLocation.Location,
tblGL_Account.Account_Desc
from tblAsset, tblAsset_Book, tblCounty_Names, CER..tblLocation, tblGL_Account
where tblAsset_Book.Level_1 = @Level_1
and tblAsset.Level_1 = tblAsset_Book.Level_1
and tblAsset_Book.Level_2 = @Level_2
and tblAsset.Level_2 = tblAsset_Book.Level_2
and tblGL_Account.Company = tblAsset.Level_2
and CER..tblLocation.SBU = tblGL_Account.Company
and tblCounty_Names.County = tblAsset.County
and CER..tblLocation.County = tblCounty_Names.County
and CER..tblLocation.Code = tblAsset.Plant
and tblGL_Account.Account = tblAsset.Account
and tblAsset_Book.Book_Number = '1'
order by tblAsset.State
View 1 Replies
View Related
Jan 5, 2001
When I try to update one table from another I get the following error
message, Does anyone know what may be the cause of the error :
Server: Msg 8152, Level 16, State 9, Line 1
String or binary data would be truncated.
The statement has been terminated.
Thanks
KUL
View 2 Replies
View Related
Oct 24, 2005
Server:Msg 1105,Level 17,State 2,Line9
Coule not allocate space to the object 'Tutorial' on 'Mytest1db'
in database because the 'PRIMARY' file group is full.
When I run a query to insert records into a table....i'm getting this error.Please Help....
View 2 Replies
View Related
Feb 9, 2006
Dear All participants.
My distribution log file size is reached upto 33GB, What I should do?
Any clue or helps are too appreciable.
Thanks
R.Mall
View 3 Replies
View Related
Aug 25, 2007
i have sp4 install. Anyone know how to fix it?
Server: Msg 2537, Level 16, State 43, Line 1
Table error: Object ID 1376776012, index ID 0, page (1:56868), row 2. Record check (Valid SqlVariant) failed. Values are 7 and 0.
Server: Msg 2537, Level 16, State 1, Line 1 ... so on
=============================
http://www.sqlserverstudy.com
View 9 Replies
View Related
Nov 23, 2005
Dear (and mighty) all:I backed up a database (SQL server 7.0) and tried to restore it onanother system (SQL Server 2000). This is not the first time I'm doingthis and never had a problem before:-- in the source dbBACKUP db_icoaraci TO DISK = 'C:TEMPBACKUP-ICOARACI.DAT'--in the destination dbRESTORE db_icoaraci FROM DISK='E:TEMPBACKUP-ICOARACI.DAT'WITH MOVE='ICOARACI_DAT' TO 'E:DBICOARACI.MDF',MOVE='ICOARACI_LOG' TO 'E:DBICOARACI.LDF'Today, to my surprise, the destination SQL returned the followingerror:Processed 25592 pages for database 'db_icoaraci', file 'ICOARACI_DAT'on file 1.Processed 1 pages for database 'db_icoaraci', file 'ICOARACI_LOG' onfile 1.Server: Msg 1105, Level 17, State 2, Line 1Could not allocate space for object '(SYSTEM table id: 6)' in database'db_icoaraci' because the 'PRIMARY' filegroup is full.Server: Msg 3013, Level 16, State 1, Line 1RESTORE DATABASE is terminating abnormally.I searched the list and a found a few posts refering to the same error,but none in the exactly same scenario.I tried to restore the database with NORECOVERY, and, before restoringthe log, increase its size (ALTER DATABASE ... etc), but SQL Serversays that the DB couldn't be open because it's in the middle of arestore...I'll appreciate any help.Regards,Branco.
View 3 Replies
View Related
Dec 17, 2007
I am experiencing some frustration in regards to parsing an email that I need to work with.
(I don't have control over the format of the email I am receiving)
Any help would be appreciated.
Thank you
Jake
Here is the error I get, when I use the SQL Query Analyzer to process my Stored Procedure. (Not every email gets this error, just some, others process just fine.)
String or binary data would be truncated.
The statement has been terminated.
Stored Procedure: eResponse.dbo.spParser
Return Code = -6
My Code is as follows:
CREATE PROCEDURE spParser
@_id nvarchar(50)
AS
--assumes the email is no longer than 4000 characters. if it might be longer, bump this number up.
-- Common Varriables
DECLARE @body nvarchar(4000)
DECLARE @i int
DECLARE @phone nvarchar(50)
DECLARE @phonestart int
DECLARE @phoneend int
DECLARE @email nvarchar(50)
DECLARE @emailstart int
DECLARE @emailend int
DECLARE @comments nvarchar(3000)
DECLARE @commentsstart int
DECLARE @commentsend int
DECLARE @OrigID varchar(50)
-- Jose Ole Variables
DECLARE @firstname nvarchar(50)
DECLARE @firstnamestart int
DECLARE @firstnameend int
DECLARE @lastname nvarchar(50)
DECLARE @lastnamestart int
DECLARE @lastnameend int
DECLARE @address1 nvarchar(50)
DECLARE @address1start int
DECLARE @address1end int
DECLARE @address2 nvarchar(50)
DECLARE @address2start int
DECLARE @address2end int
DECLARE @city nvarchar(50)
DECLARE @citystart int
DECLARE @cityend int
DECLARE @state nvarchar(5)
DECLARE @statestart int
DECLARE @stateend int
DECLARE @zip nvarchar(15)
DECLARE @zipstart int
DECLARE @zipend int
DECLARE @country nvarchar(50)
DECLARE @countrystart int
DECLARE @countryend int
DECLARE @phone2 nvarchar(50)
DECLARE @phone2start int
DECLARE @phone2end int
DECLARE @productname nvarchar(50)
DECLARE @productnamestart int
DECLARE @productnameend int
DECLARE @upccode nvarchar(50)
DECLARE @upccodestart int
DECLARE @upccodeend int
DECLARE @datecode nvarchar(50)
DECLARE @datecodestart int
DECLARE @datecodeend int
DECLARE @purchaseat nvarchar(50)
DECLARE @purchaseatstart int
DECLARE @purchaseatend int
DECLARE @purchasecity nvarchar(50)
DECLARE @purchasecitystart int
DECLARE @purchasecityend int
DECLARE @datepurchased nvarchar(50)
DECLARE @datepurchasedstart int
DECLARE @datepurchasedend int
DECLARE @dateopened nvarchar(50)
DECLARE @dateopenedstart int
DECLARE @dateopenedend int
DECLARE @subject nvarchar(50)
DECLARE @subjectstart int
DECLARE @subjectend int
-- Windosr Variables
DECLARE @name nvarchar(50)
DECLARE @namestart int
DECLARE @nameend int
DECLARE @company nvarchar(50)
DECLARE @companystart int
DECLARE @companyend int
--First replace all ASCII carriage returns and line feeds and assign the whole chunk of data to a variable.
SET @body = (select replace( REPLACE(convert(varchar(4000), message),CHAR(10),' '),CHAR(13),'') from message where mailid = @_id)
--below is the sample syntax for the individual replacements of line feeds and carriage returns, but it's combined into one statement above.
--SELECT REPLACE(@jb,CHAR(10),'') as firstpass
--SELECT REPLACE(@jb,CHAR(13),'') as secondpass
IF left(@body,47) = 'Fromubject:contact info sent from samplesite.com'
--If this is true.. then it is a sample company.
BEGIN
--The 12 in the start is compensating for the 12 Characters of "First Name: "
--Below is collecting First Name
SET @firstnamestart = (CHARINDEX('First name:',@body) + 11)
SET @firstnameend = (CHARINDEX('Last name:',@body) - 1)
SET @firstname = SUBSTRING(@body,@firstnamestart,@firstnameend-@firstnamestart)
----Below is collecting Last Name
SET @lastnamestart = (CHARINDEX('Last name:',@body) + 10)
SET @lastnameend = (CHARINDEX('Address 1:',@body) - 1)
SET @lastname = SUBSTRING(@body,@lastnamestart,@lastnameend-@lastnamestart)
--Below is collecting Address1
SET @address1start = (CHARINDEX('Address 1:',@body) + 10)
SET @address1end = (CHARINDEX('Address 2:',@body) - 1)
SET @address1 = SUBSTRING(@body,@address1start,@address1end-@address1start)
--Below is collecting Address2
SET @address2start = (CHARINDEX('Address 2:',@body) + 10)
SET @address2end = (CHARINDEX('City:',@body) - 1)
SET @address2 = SUBSTRING(@body,@address2start,@address2end-@address2start)
--Below is collecting city information
SET @citystart = (CHARINDEX('City:',@body) + 5)
SET @cityend = (CHARINDEX('State/Prov',@body) -1)
SET @city = SUBSTRING(@body,@citystart,@cityend-@citystart)
--Below is collecting state information
SET @statestart = (CHARINDEX('State/Province:',@body) + 15)
SET @stateend = (CHARINDEX('Zip/Postal',@body) -1)
SET @state = SUBSTRING(@body,@statestart,@stateend-@statestart)
--Below is collecting zip information
SET @zipstart = (CHARINDEX('Zip/Postal Code:',@body) + 16)
SET @zipend = (CHARINDEX('Country',@body) -1)
SET @zip = SUBSTRING(@body,@zipstart,@zipend-@zipstart)
--Below is collecting country information
SET @countrystart = (CHARINDEX('Country:',@body) + 8)
SET @countryend = (CHARINDEX('E-mail address',@body) -1)
SET @country = SUBSTRING(@body,@countrystart,@countryend-@countrystart)
--Below is collecting email information
SET @emailstart = (CHARINDEX('E-mail address:',@body) + 15)
SET @emailend = (CHARINDEX('Daytime',@body) -1)
SET @email = SUBSTRING(@body,@emailstart,@emailend-@emailstart)
--Below is collecting phone information
SET @phonestart = (CHARINDEX('Daytime Phone:',@body) + 14)
SET @phoneend = (CHARINDEX('Evening Phone:',@body) -1)
SET @phone = SUBSTRING(@body,@phonestart,@phoneend-@phonestart)
--Below is collecting phone2 information
SET @phone2start = (CHARINDEX('Evening Phone:',@body) + 14)
SET @phone2end = (CHARINDEX('Product Name',@body) -1)
SET @phone2 = SUBSTRING(@body,@phone2start,@phone2end-@phone2start)
--Below is collecting Product Name information
SET @productnamestart = (CHARINDEX('Product Name:',@body) + 12)
SET @productnameend = (CHARINDEX('UPC Code:',@body) -1)
SET @productname = SUBSTRING(@body,@productnamestart,@productnameend-@productnamestart)
--Below is collecting UPC Code information
SET @upccodestart = (CHARINDEX('UPC Code:',@body) + 9)
SET @upccodeend = (CHARINDEX('Date Code:',@body) -1)
SET @upccode = SUBSTRING(@body,@upccodestart,@upccodeend-@upccodestart)
--Below is collecting Date Code information
SET @datecodestart = (CHARINDEX('Date Code:',@body) + 10)
SET @datecodeend = (CHARINDEX('Purchased At',@body) -1)
SET @datecode = SUBSTRING(@body,@datecodestart,@datecodeend-@datecodestart)
--Below is collecting Purchase At information
SET @purchaseatstart = (CHARINDEX('Purchased At',@body) + 26)
SET @purchaseatend = (CHARINDEX('Purchase City:',@body) -1)
SET @purchaseat = SUBSTRING(@body,@purchaseatstart,@purchaseatend-@purchaseatstart)
--Below is collecting Purchase City information
SET @purchasecitystart = (CHARINDEX('Purchase City:',@body) + 14)
SET @purchasecityend = (CHARINDEX('Date Purchased',@body) -1)
SET @purchasecity = SUBSTRING(@body,@purchasecitystart,@purchasecityend-@purchasecitystart)
--Below is collecting Date Purchased information
SET @datepurchasedstart = (CHARINDEX('Date Purchased:',@body) + 15)
SET @datepurchasedend = (CHARINDEX('Date Opened',@body) -1)
SET @datepurchased = SUBSTRING(@body,@datepurchasedstart,@datepurchasedend-@datepurchasedstart)
--Below is collecting Date Opened information
SET @dateopenedstart = (CHARINDEX('Date Opened:',@body) + 12)
SET @dateopenedend = (CHARINDEX('E-mail Subject:',@body) -1)
SET @dateopened = SUBSTRING(@body,@dateopenedstart,@dateopenedend-@dateopenedstart)
--Below is collecting Email Subject information
SET @subjectstart = (CHARINDEX('E-mail Subject:',@body) + 15)
SET @subjectend = (CHARINDEX('Comments:',@body) -1)
SET @subject = SUBSTRING(@body,@subjectstart,@subjectend-@subjectstart)
--Below is collecting message information
SET @commentsstart = (CHARINDEX('Comments:',@body) + 10)
SET @commentsend = len(@body)
SET @comments = SUBSTRING(@body,@commentsstart,@commentsend-@commentsstart)
--below is the part that actually writes the data out to the Output table
INSERT INTO OutputEmails
(FirstName, LastName, Address1, Address2, City, State, Zip, Country, eMail, Phone, Phone2, ProductName, UPCCode, DateCode, PurchaseAt, PurchaseCity, DatePurchased, DateOpened, Subject, Comments, OrigID)
SELECT
ltrim(SUBSTRING(@body,@firstnamestart,@firstnameend-@firstnamestart)) as FirstName,
ltrim(SUBSTRING(@body,@lastnamestart,@lastnameend-@lastnamestart)) as LastName,
ltrim(SUBSTRING(@body,@address1start,@address1end-@address1start)) as Address1,
ltrim(SUBSTRING(@body,@address2start,@address2end-@address2start)) as Address2,
ltrim(SUBSTRING(@body,@citystart,@cityend-@citystart)) as City,
ltrim(SUBSTRING(@body,@statestart,@stateend-@statestart)) as State,
ltrim(SUBSTRING(@body,@zipstart,@zipend-@zipstart)) as Zip,
ltrim(SUBSTRING(@body,@countrystart,@countryend-@countrystart)) as Country,
ltrim(SUBSTRING(@body,@emailstart,@emailend-@emailstart)) as eMail,
ltrim(SUBSTRING(@body,@phonestart,@phoneend-@phonestart)) as Phone,
ltrim(SUBSTRING(@body,@phone2start,@phone2end-@phone2start)) as Phone2,
ltrim(SUBSTRING(@body,@productnamestart,@productnameend-@productnamestart)) as ProductName,
ltrim(SUBSTRING(@body,@upccodestart,@upccodeend-@upccodestart)) as UPCCode,
ltrim(SUBSTRING(@body,@datecodestart,@datecodeend-@datecodestart)) as DateCode,
ltrim(SUBSTRING(@body,@purchaseatstart,@purchaseatend-@purchaseatstart)) as PurchaseAt,
ltrim(SUBSTRING(@body,@purchasecitystart,@purchasecityend-@purchasecitystart)) as PurchaseCity,
ltrim(SUBSTRING(@body,@datepurchasedstart,@datepurchasedend-@datepurchasedstart)) as DatePurchased,
ltrim(SUBSTRING(@body,@dateopenedstart,@dateopenedend-@dateopenedstart)) as DateOpened,
ltrim(SUBSTRING(@body,@subjectstart,@subjectend-@subjectstart)) as Subject,
ltrim(SUBSTRING(@body,@commentsstart,@commentsend-@commentsstart)) as Comments,
@_id as OrigID
FROM dbo.message
WHERE (mailId = @_id)
END
ELSE BEGIN
--below prints the whole value in the debugger (SQL Query Analyzer)
--print @body
--below prints the length of the whole value
--print len(@body)
--below prints the location of 'Callers Name:'
--Print CHARINDEX('Name: ',@body)
--Below is collecting the Name information
--The 6 in the start is compensating for the 6 Characters of "Name: "
SET @namestart = (CHARINDEX('Name:',@body) + 5)
SET @nameend = (CHARINDEX('Email:',@body) - 1)
SET @name = SUBSTRING(@body,@namestart,@nameend-@namestart)
--Below is collecting email information
SET @emailstart = (CHARINDEX('Email:',@body) + 6)
SET @emailend = (CHARINDEX('Title:',@body) -1)
SET @email = SUBSTRING(@body,@emailstart,@emailend-@emailstart)
--Below is collecting Company information
SET @companystart = (CHARINDEX('Company:',@body) + 8)
SET @companyend = (CHARINDEX('Phone Number:',@body) -1)
SET @company = SUBSTRING(@body,@companystart,@companyend-@companystart)
--Below is collecting phone information
SET @phonestart = (CHARINDEX('Phone Number:',@body) + 13)
SET @phoneend = (CHARINDEX('Comments:',@body) -1)
SET @phone = SUBSTRING(@body,@phonestart,@phoneend-@phonestart)
--Below is collecting message information
SET @commentsstart = (CHARINDEX('Comments:',@body) + 9)
SET @commentsend = len(@body)
SET @comments = SUBSTRING(@body,@commentsstart,@commentsend-@commentsstart)
--below is the part that actually writes the data out to the Output table
INSERT INTO OutputEmails
(Name, eMail, Company, Phone, Comments, OrigID)
SELECT
ltrim(SUBSTRING(@body,@namestart,@nameend-@namestart)) as Name,
ltrim(SUBSTRING(@body,@emailstart,@emailend-@emailstart)) as eMail,
ltrim(SUBSTRING(@body,@companystart,@companyend-@companystart)) as Company,
ltrim(SUBSTRING(@body,@phonestart,@phoneend-@phonestart)) as Phone,
ltrim(SUBSTRING(@body,@commentsstart,@commentsend-@commentsstart)) as Comments,
@_id as OrigID
FROM dbo.message
WHERE (mailId = @_id)
END
--At the very end when you're satisfied that the data has been processed properly, delete the appropriate message record from the message table
DELETE FROM MESSAGE Where message.mailID = @_ID
GO
Sample Data that has problems
Fromubject:contact info sent from samplesite.comBody:First name: Sample
Last name: Name
Address 1: 123 Testing Road
Address 2: Don't filled
City: Park Forest
State/Province: FL
Zip/Postal Code: 12345-1234
Country: USA
E-mail address: validemail@email.com
Daytime Phone: 123-123-1234
Evening Phone: Don't filled
Product Name: Sample Product with Cheese
UPC Code: 12345-89521
Date Code: 1251237 D PST . 5290
Purchased At (Store Name): StoreName
Purchase City: Store City
Date Purchased: 12/8/2007
Date Opened: 12/14/2007
E-mail Subject: nail in product
Comments: when I purchased your product, there was something in it. Obviously I am not happy about this. Please contact me. Thank you John Q Public
View 6 Replies
View Related
Jun 6, 2007
Hi,
When I am trying to access SQL Server 2000 database from another machine i got this error
Server: MSg 17, Level 16, State 1 [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied
but I could access the database on same server and in that server i could access other databases in different server.
View 6 Replies
View Related
Feb 28, 2007
As an 'SA' I thought that you have permission to do anything on the server. Running an update command from Query Analyzer is throwing this error:
SQL Server 2000 SP3
Server: Msg 18456, Level 14, State 1, Line 1
Login failed for user 'sa'.
The table is in the dbo schema.
Has anyone seen this error before?
View 12 Replies
View Related
Oct 20, 2007
I am getteing
need help
Query analyzer error Unable to connect server local Msg17, level 16,state 1
ODBC SQL server driver [DBNETLIB]SQL server does not exist
View 6 Replies
View Related
Aug 24, 2007
HI,
may i know the sql server 2005 standard cd is equal sql server 2005 standard volumn license cd ?
View 3 Replies
View Related
Apr 26, 1999
Hi,
Running NT 4 Svc Pack 4, SQL Server 6.5 Svc Pack 5a. I have an sp to build indexes and it is no longer running...after a couple moments I get the error(s) "Msg 1509, Lvl20, State 2, Row Compare Error". The "State" is 2 on most of the messages and 1 on 1...I get 5 messages at once. I looked through the support information at Microsoft's site and found 1 article on this but...it was for 6.0, it stated that it was fixed in Svc Pack 3, and provided a workaround of increasing the "sort pages" value in the SQL configuration. I was unable to find the "sort pages" option so I am assuming it is no longer available. I then installed the SQL Svc Pack 5a but still no resolution. At this point I have no indexes on my tables and can't find a way to rebuild them. Any help would be appreciated...The only thing I can think of is that I installed the NT svc pack last week and this might have caused it...the indexes sp runs over the weekend so I did not notice this until this morning.
Thanks in Advance,
Kevin
View 1 Replies
View Related
Jun 14, 2001
Attempt to fetch logical page ' ' in database ' '. Object belongs to ' ' not object ' '.
Please someone help me fix this. My table is corrupt and I cannot drop it and restore it because I keep getting an error message that says:
Cannot drop table ' ' there is not enough space in syslogs. blah, blah, blah.
Can anyone help me? It woould be much appreciated.
Christine
View 1 Replies
View Related
Feb 1, 2006
Hi,I am getting the following error from the query below against SQLServer 8.00.2039 (SP4)Error:====Server: Msg 107, Level 16, State 2, Line 1The column prefix 'd' does not match with a table name or alias nameused in the query.Select Statement:=============select ....from trades a,gems_product_groups b,portfolio_nav_mapping c,products d,limit_types eleft outer join gems_prod_trade_mod f on d.product_id =f.product_IDI know this was a known bug in MS-SQL7, but I thought it had been fixedin 2000.Can anyone help?Thanks
View 3 Replies
View Related
Dec 17, 2007
I am writing a user defined function but I am receiving an error message that I can figure out. Any answers out there?
Msg 102, Level 15, State 1, Procedure ufn_GetStreetNumber, Line 25
Incorrect syntax near '@StreetNum'.
-- ---------------------------------------------------------------------------------
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Description: Parses out the Street number for Address field
-- =============================================
CREATE FUNCTION dbo.ufn_GetStreetNumber
(
-- Add the parameters for the function here
@StreetAddr varchar(50)
)
RETURNS int
AS
BEGIN
-- Declare the return variable here
DECLARE @StreetNum varchar(50);
DECLARE @iIter smallint, @iNoOfChars smallint, @iStreetNo int;
SET @StreetNum=NULL;
SET @iStreetNo=0;
SET @iNoOfChars=1;
SET @iIter=1;
-- Add the T-SQL statements to compute the return value here
WHILE Isnumeric(Substring(@StreetAddr,@iNoOfChars,@iIter))=1
@StreetNum=@StreetNum + Substring(@StreetAddr,@iNoOfChars,@iIter)
@iIter=@iIter+1
BREAK
@iStreetNo=@StreetNum
-- Return the result of the function
RETURN @iStreetNo
END
GO
View 3 Replies
View Related
Feb 15, 2008
I'm getting this error in SQL server.
Msg 8101, Level 16, State 1, Line 68
An explicit value for the identity column in table 'temp_notes' can only be specified when a column list is used and IDENTITY_INSERT is ON.
My original script looked like this.
SET NOCOUNT ON
DECLARE @patient_id int
,@phn varchar(9)
,@full_name varchar(100)
,@birth_date datetime
,@entry_note varchar(8000)
,@entry_date datetime
,@rec_counter int
,@Clinic_identifier varchar(24)
,@chart_count int
set @Clinic_identifier = 'MEDOWL.'
set @rec_counter = 0
DECLARE patients_cursor CURSOR FOR
SELECT a.full_name, a.birth_date, a.phn, a.patient_id
FROM patient as a
,clinicdoctors as b
WHERE a.patient_id IN (51450,49741,57290) --= 51450
and datalength(a.phn) = 9
and b.clinicdoctor_id = a.clinicdoctor_id
ORDER BY a.last_name,a.first_name,a.patient_id
OPEN patients_cursor
FETCH NEXT FROM patients_cursor
INTO @full_name, @birth_date, @phn, @patient_id
--select @full_name, @birth_date, @phn, @patient_id
WHILE @@FETCH_STATUS = 0
BEGIN
DECLARE chartcount_cursor CURSOR FOR
select count(*)
from ChartEntries
where patient_id = @patient_id
OPEN chartcount_cursor
FETCH NEXT FROM chartcount_cursor INTO @chart_count
--select @chart_count as chtcount
DECLARE chartentries_cursor CURSOR FOR
select entry_datetime,entry_note
from ChartEntries
where patient_id = @patient_id
order by Patient_id, ChartEntry_Id desc
-- Variable value from the outer cursor
OPEN chartentries_cursor
FETCH NEXT FROM chartentries_cursor INTO @entry_date,@entry_note
--select @entry_date,@entry_note
WHILE @@FETCH_STATUS = 0
BEGIN
set @rec_counter = @rec_counter + 1
--select @@FETCH_STATUS as status
IF @@FETCH_STATUS = 0
insert into temp_notes
values (@Clinic_identifier+@phn+'.'
+convert(varchar,@rec_counter)+'.'
+convert(varchar,@chart_count),
@phn,
@full_name,
@birth_date,
@entry_date,
@entry_note
)
-- Get the next entry note
FETCH NEXT FROM chartentries_cursor INTO @entry_date,@entry_note
--select @entry_date,@entry_note
END
CLOSE chartentries_cursor
DEALLOCATE chartentries_cursor
CLOSE chartcount_cursor
DEALLOCATE chartcount_cursor
set @rec_counter = 0
set @chart_count = 0
-- Get the next patient record
FETCH NEXT FROM patients_cursor
INTO @full_name, @birth_date, @phn, @patient_id
--select @full_name, @birth_date, @phn, @patient_id
-- Get the next chart record count
--FETCH NEXT FROM chartcount_cursor INTO @chart_count
--select @chart_count as chtcount
END
CLOSE patients_cursor
DEALLOCATE patients_cursor
GO
I then changed it to left pad the variables @rec_counter and @chart_count.
SET NOCOUNT ON
DECLARE @patient_id int
,@phn varchar(9)
,@full_name varchar(100)
,@birth_date datetime
,@entry_note varchar(8000)
,@entry_date datetime
,@rec_counter int
,@Clinic_identifier varchar(24)
,@chart_count int
set @Clinic_identifier = 'MEDOWL.'
set @rec_counter = 0
DECLARE patients_cursor CURSOR FOR
SELECT a.full_name, a.birth_date, a.phn, a.patient_id
FROM patient as a
,clinicdoctors as b
WHERE a.patient_id IN (51450,49741,57290) --= 51450
and datalength(a.phn) = 9
and b.clinicdoctor_id = a.clinicdoctor_id
ORDER BY a.last_name,a.first_name,a.patient_id
OPEN patients_cursor
FETCH NEXT FROM patients_cursor
INTO @full_name, @birth_date, @phn, @patient_id
--select @full_name, @birth_date, @phn, @patient_id
WHILE @@FETCH_STATUS = 0
BEGIN
DECLARE chartcount_cursor CURSOR FOR
select count(*)
from ChartEntries
where patient_id = @patient_id
OPEN chartcount_cursor
FETCH NEXT FROM chartcount_cursor INTO @chart_count
--select @chart_count as chtcount
DECLARE chartentries_cursor CURSOR FOR
select entry_datetime,entry_note
from ChartEntries
where patient_id = @patient_id
order by Patient_id, ChartEntry_Id desc
-- Variable value from the outer cursor
OPEN chartentries_cursor
FETCH NEXT FROM chartentries_cursor INTO @entry_date,@entry_note
--select @entry_date,@entry_note
WHILE @@FETCH_STATUS = 0
BEGIN
set @rec_counter = @rec_counter + 1
--select @@FETCH_STATUS as status
IF @@FETCH_STATUS = 0
insert into temp_notes
values (@Clinic_identifier+@phn+'.'
+REPLICATE('0',3),convert(varchar,@rec_counter)+'. '
+REPLICATE('0',3),convert(varchar,@chart_count),
@phn,
@full_name,
@birth_date,
@entry_date,
@entry_note
)
-- Get the next entry note
FETCH NEXT FROM chartentries_cursor INTO @entry_date,@entry_note
--select @entry_date,@entry_note
END
CLOSE chartentries_cursor
DEALLOCATE chartentries_cursor
CLOSE chartcount_cursor
DEALLOCATE chartcount_cursor
set @rec_counter = 0
set @chart_count = 0
-- Get the next patient record
FETCH NEXT FROM patients_cursor
INTO @full_name, @birth_date, @phn, @patient_id
--select @full_name, @birth_date, @phn, @patient_id
-- Get the next chart record count
--FETCH NEXT FROM chartcount_cursor INTO @chart_count
--select @chart_count as chtcount
END
CLOSE patients_cursor
DEALLOCATE patients_cursor
GO
That is when I received the error, so I inserted this command before the insert line but it made no difference.
SET IDENTITY_INSERT temp_notes ON
insert into temp_notes
values (@Clinic_identifier+@phn+'.'
+REPLICATE('0',3),convert(varchar,@rec_counter)+'. '
+REPLICATE('0',3),convert(varchar,@chart_count),
@phn,
@full_name,
@birth_date,
@entry_date,
@entry_note
)
I'm concatenating four different variables together to insert into the column note_id.
What is the problem? I just don't see it. My table definition looks like this.
CREATE TABLE [dbo].[temp_notes](
[temp_Id] [int] IDENTITY(1,1) NOT NULL,
[note_Id] [varchar](24) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
[phn] [char](9) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
[full_name] [varchar](100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[birth_date] [datetime] NULL,
[entry_datetime] [datetime] NULL,
[Entry_Note] [text] COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
CONSTRAINT [PK_temp_notes] PRIMARY KEY CLUSTERED
(
[temp_Id] ASC
) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
View 2 Replies
View Related
Dec 4, 2007
Error 4305
What would be the cause of this error?
Msg 4305, Level 16, State 1, Line 1
The log in this backup set begins at LSN 8229000000047200001, which is too recent to apply to the database. An earlier log backup that includes LSN 8219000000021400001 can be restored
And what would the fix be?
I am trying to restore from a Full Backup and then the log files on a development machine.
Cheers,
Casey
View 5 Replies
View Related
Aug 2, 2007
Hi,
I have built a stored procedure and the code is like below:
Code Snippet
DECLARE @Table_Name VARCHAR(100)
DECLARE @Table_Desc SQL_VARIANT
DECLARE @Query VARCHAR(8000)
USE HRD
SELECT @Table_Name = 'Employee'
SELECT @Query = 'IF EXISTS (SELECT * FROM sys.triggers WHERE object_id = OBJECT_ID(N''[dbo].[DEL_' + UPPER(@Table_Name) + ']''))
DROP TRIGGER [dbo].[DEL_' + UPPER(@Table_Name) + ']'
EXEC(@Query)
SELECT @Table_Desc = (SELECT a.value
FROM
sys.extended_properties a, sys.tables b
WHERE a.major_id = b.object_id
AND a.minor_id = 0
AND a.name = 'MS_DESCRIPTION'
AND b.name = @Table_Name)
SELECT @Query = '''CREATE TRIGGER [DEL_' + UPPER(@Table_Name) + '] ON dbo.' + @Table_Name + '
FOR DELETE
AS
DECLARE @Old_Value VARCHAR(8000)
DECLARE @New_Value VARCHAR(8000)
DECLARE @P_Key VARCHAR(8000)
DECLARE @P_Key_Value VARCHAR(8000)
DECLARE @P_Key_Insert VARCHAR(8000)
DECLARE @Comment VARCHAR(8000)
SELECT @P_Key_Insert = ''''''''
EXEC(''''IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N''''''''[dbo].[Temp_PrimKey]'''''''') AND type in (N''''''''U''''''''))
DROP TABLE [dbo].[Temp_PrimKey]'''')
SELECT K.COLUMN_NAME INTO Temp_PrimKey
FROM INFORMATION_SCHEMA.TABLE_CONSTRAINTS T
INNER JOIN INFORMATION_SCHEMA.KEY_COLUMN_USAGE K
ON T.CONSTRAINT_NAME = K.CONSTRAINT_NAME
WHERE
T.CONSTRAINT_TYPE = ''''PRIMARY KEY'''' AND T.TABLE_NAME = ''''' + @Table_Name + '''''
EXEC(''''IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N''''''''[dbo].[Temp_Value]'''''''') AND type in (N''''''''U''''''''))
DROP TABLE [dbo].[Temp_Value]'''')
EXEC(''''CREATE TABLE [dbo].[Temp_Value](
[PValue] [VARCHAR](max) NOT NULL
) ON [PRIMARY]'''')
EXEC(''''IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N''''''''[dbo].[Temp_Deleted]'''''''') AND type in (N''''''''U''''''''))
DROP TABLE [dbo].[Temp_Deleted]'''')
SELECT * INTO Temp_Deleted FROM deleted
DECLARE Curs_PrimKey CURSOR FOR
SELECT * FROM Temp_PrimKey
OPEN Curs_PrimKey
FETCH NEXT FROM Curs_PrimKey INTO @P_Key
WHILE @@FETCH_STATUS = 0
BEGIN
EXEC(''''INSERT INTO Temp_Value SELECT ''''+ @P_Key + '''' FROM Temp_Deleted'''')
SELECT @P_Key_Value = (SELECT PValue FROM Temp_Value)
EXEC(''''DELETE FROM Temp_Value'''')
SELECT @P_Key_Insert = @P_Key_Insert + @P_Key + '''' = '''' + @P_Key_Value + '''', ''''
FETCH NEXT FROM Curs_PrimKey INTO @P_Key
END
CLOSE Curs_PrimKey
DEALLOCATE Curs_PrimKey
EXEC(''''IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N''''''''[dbo].[Temp_Deleted]'''''''') AND type in (N''''''''U''''''''))
DROP TABLE [dbo].[Temp_Deleted]'''')
EXEC(''''IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N''''''''[dbo].[Temp_Value]'''''''') AND type in (N''''''''U''''''''))
DROP TABLE [dbo].[Temp_Value]'''')
SELECT @P_Key_Insert = LEFT(@P_Key_Insert, LEN(@P_Key_Insert)-2)
SELECT @Comment = ''''' + CAST(@Table_Desc AS VARCHAR) + ' deleted, '''' + @P_Key_Insert
INSERT INTO TLOG(Log_Date, Log_Reference, Log_Comment)
VALUES (GETDATE(), @P_Key_Insert, @Comment)
'''
--PRINT @Query
EXEC(@Query)
Problem is when I run it gives error:
Msg 102, Level 15, State 1, Line 1Incorrect syntax near 'CREATE TRIGGER [DEL_EMPLOYEE] ON dbo.Employee FOR DELETEAS DECLARE @Old_Value VARCHAR(8000)DECLARE @New_Value VARCHA'.
If I print the @Query and run it in a query analyzer using the statement EXEC it worked. It's giving me headache, this supposed to be a simple exec statement. Please advise. Thanks.
View 2 Replies
View Related
May 1, 2008
need help
on expression IN
whan i do this i get an error
Msg 207, Level 16, State 1, Line 17
Invalid column name 't.empID'.
Code Snippet
DECLARE @vempID varchar(500)
set @vempID = '68737477,51622017'
update [nili].[dbo].[tb_pivot_big]
set fld1 = case v.fld1 when '101' then 'a' when '102' then 'd' when '103' then 'u' when '104' then 'j' end
, f1 = case v.fld1 when '101' then 'b' when '102' then 'r' when '103' then 'i' when '104' then 'l' end
, f11 = case v.fld1 when '101' then 'c' when '102' then 't' when '103' then 'd' when '104' then 'm' end
from [nili].[dbo].[tb_pivot_big] t
inner join (select *
from [nili].[dbo].[tb_pivot_big]
where val_orginal = 1) v
on t.empID = v.empID
WHERE (t.val_orginal = 2) AND (charindex(','+CONVERT(varchar,[t.empID])+',',','+@vempID+',')) > 0
whan i run it like this it OK
Code Snippet
SELECT v.Fname, v.empID
FROM dbo.tb_pivot_big AS t INNER JOIN
(SELECT napipot, Fname, empID, new_unit, mhlka_id, mhlka, val_orginal, fld1, f1, f11, fld2, f2, f22, fld3, f3, f33, fld4, f4, f44, fld5, f5, f55, fld6, f6, f66, fld7, f7, f77,
fld8, f8, f88, fld9, f9, f99, fld10, f10, f110, fld11, f_11, f111, fld12, f12, f112, fld13, f13, f113, fld14, f14, f114, fld15, f15, f115, fld16, f16, f116, fld17, f_7,
f117, fld18, f18, f118, fld19, f19, f119, fld20, f20, f220, fld21, f21, f221, fld22, f_22, f222, fld23, f23, f223, fld24, f24, f224, fld25, f25, f225, fld26, f26, f226,
fld27, f27, f227, fld28, f28, f228, fld29, f29, f229, fld30, f30, f330, fld31, f31, f331
FROM dbo.tb_pivot_big
WHERE (val_orginal = 1)) AS v ON t.empID = v.empID
WHERE (t.val_orginal = 2) AND (t.empID IN (68737477, 51622017))
TNX
View 1 Replies
View Related
Jul 19, 2006
Hello Folks,
I am moving the model & Msdb databases to a different location and I have this error.
Thanks
Msg 3710, Level 16, State 1, Line 1
Cannot detach an opened database when the server is in minimally configured mode.
View 3 Replies
View Related
Dec 7, 2000
What is the default transaction isolation level for SQL Server?
and Advantages of having multiple filegroups ?
View 1 Replies
View Related
