Transaction Log Backups

Mar 13, 2008

Yesterday I received a message from the Trans Log backup job that it could not complete because a full backup wasn't completed. I checked and a full backup was completed that morning 5:00 AM. This happened during the 4 PM run and again at 5 PM. There was enough space to do the backup, even though I did a shrink file on the log. I, also, ran another backup between 5-6 PM. Between both of these activities, the job completed during the 6 PM run. Is this a common occurance? Has anyone else seen this happen. I am curious. Any light that can be shed on this, would be greatlt appreciated. Tom.

View 6 Replies

DB Engine :: Will Transaction Log Backups Not Free Up Log During Full Backups

Nov 15, 2015

The space allocated to the Log in question is 180 GB. During this time period I was running TLog backups every 5 minutes, yet the log continued to chew through to 80 GB used, even after the process was complete and a final TLog backup had been taken. It continued to stay very large until the Full backup was complete -- or something else that I'm unaware of completed. Like every other DBA I typically take a TLog backup to shrink the log, but what appeared to be the case here was the Full completed and it released the used log space. All said, will Transaction Log backups not free up the log during Full backups?

View 3 Replies View Related

Transaction Backups

Nov 15, 2001

I setup a maintenance plan to create full backups every night and to backup the transaction logs every hour. In the backup log, it always fails on backing up the transaction log for Master and MSDB. I believe this is because the recovery model for these two databases is set to "SIMPLE". Is it ok to change the recovery model on these two system databases to "FULL"?

Thanks,
Ken Nicholson

View 1 Replies View Related

Transaction Log Backups

May 9, 2001

I am trying to create a backup for the transaction logs on one
of the databases I support. The problem is in EM, the only
options it gives me are a Full DB Backup or a Differential DB
Backup. I have other DB's with TL backup's, why can't I on this
particular one?

View 1 Replies View Related

Transaction Log Backups

Mar 31, 2004

I have 5 databases on my sql server and they are taking backups on everyday twice. ANd we are not taking any transactional log backups.Now i have very larger log files which are more than 6 GB each.And the databases are less in size compared to the logfiles.
Should I take transaction log backups with truncate option...
PLease suggest me the best stratagy i should follow to overcome the problem.
Thanks.

View 14 Replies View Related

Reading In Transaction Log Backups With T-SQL

May 30, 2002

I have a backup regime where i take a full backup of my production database once a day and then 3 min log backups, I backup my msdb and master once a week.

I need to write a script to scroll through a given directory and restore the log backups in date/time order(with no restore) until the last file and then restore.

I know this is availible in the backup history but if my SQl box crashes and i cant get a uptodate master and msdb the backup history will not be uptodate to restore the database to it's current state.

Can anybody help with a script? or give me any pointers of how to read in filenames in SQL (please remenber i am a SQL virgin).

Thanks

Barry.

View 1 Replies View Related

Failed Transaction Log Backups

Feb 6, 2000

SQL 7 SP1 NT 4.0 SP5

I created a backup plan for transaction logs only to run every 30 minutes. It works great for all databases except the Master and my main database scdb_v2.

The routine backups up the other 3 databases with no issue.

Why is this happening ?

Thanks,

Craig Somberg
mailto:csomberg@stageone.com

View 3 Replies View Related

Remote Transaction Log Backups

Jan 20, 1999

Using SQL Server 6.5 and NT 4.0,..I'm trying to schedule a backup of a transaction log from one SQL Server
to another SQL Server both running NT 4.0. I keep getting:

dbsvolopen:Backup device t:ackup
emote.dat failed to open, operating system error =5 (Access denied)

I've checked every conceivable permissions entry on the target NT server and am now reading about the
different security modes for communicating between SQL Servers but I'm concerned that this may not be
where the problem really resides. Time is money.

Has anyone else configured a backup strategy where the database has a full backup to tape daily and the
transaction log is backed up every couple of hours, without truncatre, to disk, on another SQL Server?

Thanks in advance,
Doug

View 4 Replies View Related

Failure Of Transaction Log Backups

Jan 14, 2002

The Transaction log backups that I do for the msdb and master databases ALWAYS fail. The full database backups always succeed. Are the master and msdb databases not supposed to have their transaction logs backed up? Jobs where configured thru the Database Maintenance wizard. Will the jobs fail if nothing has changed in either database? I am also confused by the fact that database and log backups for the model database ALWAYS work when I expect their to be little if none activity in that database.

Thanks in advance,

Riley

View 2 Replies View Related

Why Won't My Transaction Log Backups Purge

Oct 5, 2004

Hi

We are running SQL Server 2000 and making full database backups using a maintenance plan. The transaction logs are being backed up via a separate plan.

However, the transaction log backups aren't purging but the database ones are. They are both run under the same id and both write to the same directory. Old text reports also get purged fine. I've got 'Delete older than 1 week' ticked for everything.

Can anyone think of anything else to check ?
Thanks

View 7 Replies View Related

Question On Transaction Log Backups

May 23, 2006

New to Sql Server, running SQL Server 2000.Our transaction log file backups occasionally fail as the size of thetransaction log gets really huge. We'd like to schedule additionaltransaction log backups. Does that require an exclusive on the databaseor can the db be used during a transaction log backup?Also, does switching to a bulk mode recovery model before a bulkoperation then switching back to full recovery mode after present anyissues?Thanks in advance.

View 16 Replies View Related

Backups And Transaction Logs

Jan 10, 2008

Have a small shop and a maintenance plan that does a full backup on all user databases every night. I would have thought that a full backup (transaction log, too), would reduce the size of the transaction logs? Isn't that the point of a full backup? Mine seem to be growing larger. I do the shrink, rebuild indexes, backup the databse, backup the transaction log, clear history and folders older than 7 days. For example, the following db decreased only once during the period. But, note how the transaction log size continues to increases most of the time.

db, trn
253,196 - 394,245
253,193 - 365,695
253,191 - 360,572
254,219 - 381,699
254,223 - 406,346
254,223 - 411,018

Can someone explain this to me? Am I doing something wrong or just not understanding the process correctly?

Thanks,
Janet

View 4 Replies View Related

Differential And Transaction Log Backups

Feb 12, 2008

Hi,

On our SQL Server 2005 SP 2 i recently updated our Backup Plan.
I now make a Full backup every night, Differential backup every hour and Transaction log backup every 15 minutes.
This all works fine all the time except sometimes when the differential and transaction log backups want to run on the same time and then 1 of the 2 fails.
The error i get is code 0xC0010018. Error loading a task.

I made 1 Maintenance Plan with a subplan for each backup type (Full, differ....), so i can schedule them the way i want.
Searched the internet for an answer but i couldn't find it. The tasks only fail when the run simultaneous. Starting them manually always works.

Anybody has an idea what i need to do to get this working properly?
Thanks!!

View 3 Replies View Related

Transaction Log Backups (Mass Storage)

May 30, 2002

I want to backing up my hourly transaction log backups direct to a mass storage unit as opposed to the local server. However when trying to set this up it only gives me option of backing up to local drives, even though I have a drive mappping to the mass storage unit.. I'm there is a simple around this.Would appreciate any advice..many Thanks..

View 2 Replies View Related

Transaction Log Backups Failing (Miserably)

Aug 1, 2000

We have a maintenance plan in SQL 7.0 that is performs a full backup each night and is supposed to perform tran log backups every two hours throughout each business day. For the most part, the first tran log backup after the full backup works fine, but the others fail.

Any ideas?

Thanks!

Ellen

View 3 Replies View Related

Utility To Read Transaction Log Backups

Nov 20, 2000

Does anyone know of a utility to read SQL 7 Transaction Log Backups and present them in a meaningful format?

View 2 Replies View Related

TFS Transaction Log Backups Failing After SQL/SP2 Applied

May 29, 2007

The SQL server transition log backups for the ReportServer and ReportServerTempDB databases have stopped working ever since I applied SQL Server SP2 to my TFS. I know this because I know the date the SQL SP was applied and I see that my transaction logs started to fail immediately after application of the SP. This is noted because the backup logs for SQL server start to contain the failure immediately after SP2 application. The failure is because the databases are now set to the simple recovery model (or they were set to the simple model before application of SP2 and the previous SQL server allowed or properly ignored transaction log backups with the simple database recovery model). Why is this failing since the backup task indicates that databases with simple recovery are automatically excluded? Is the reportserver and reportservertempdb both supposed to be simple recovery? I thought reportserver was usually full recovery.

Here's the contents of TfsTransactionLogBackup_20070308160004.txt before the SP2 application:

Code SnippetMicrosoft(R) Server Maintenance Utility (Unicode) Version 9.0.2047
Report was generated on "TEAMSERVER".
Maintenance Plan: TfsTransactionLogBackup
Duration: 00:00:00
Status: Succeeded.
Details:

Here's the contents of TfsTransactionLogBackup_Subplan_20070308180007.txt immediately after application of SP2:

Code Snippet

NEW COMPONENT OUTPUT
Microsoft(R) Server Maintenance Utility (Unicode) Version 9.0.3042
Report was generated on "TEAMSERVER".
Maintenance Plan: TfsTransactionLogBackup
Duration: 00:00:05
Status: Warning: One or more tasks failed..
Details:
Back Up Database (Transaction Log) (TEAMSERVER)
Backup Database on Target server connection
Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped.
Databases: All user databases
Type: Transaction Log
Append existing
Task start: 2007-03-08T18:00:02.
Task end: 2007-03-08T18:00:02.
Failed:(0) Database 'ReportServer' will not be backed up because it does not have its recovery model set to Full or BulkLogged.

Back Up Database (Transaction Log) (TEAMSERVER)
Backup Database on Target server connection
Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped.
Databases: All user databases
Type: Transaction Log
Append existing
Task start: 2007-03-08T18:00:02.
Task end: 2007-03-08T18:00:02.
Failed:(0) Database 'ReportServerTempDB' will not be backed up because it does not have its recovery model set to Full or BulkLogged.

Back Up Database (Transaction Log) (TEAMSERVER)
Backup Database on Target server connection
Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped.
Databases: All user databases
Type: Transaction Log
Append existing
Task start: 2007-03-08T18:00:03.
Task end: 2007-03-08T18:00:03.
Failed:(-1073548784) Executing the query "BACKUP LOG [ReportServer] TO DISK = N'E:\SQL Server\Database Services\MSSQL.1\MSSQL\Backup\ReportServer_backup_200703081800.trn' WITH NOFORMAT, NOINIT, NAME = N'ReportServer_backup_20070308180002', SKIP, REWIND, NOUNLOAD, STATS = 10
" failed with the following error: "The statement BACKUP LOG is not allowed while the recovery model is SIMPLE. Use BACKUP DATABASE or change the recovery model using ALTER DATABASE.
BACKUP LOG is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.

Command:BACKUP LOG [ReportServer] TO DISK = N''E:SQL ServerDatabase ServicesMSSQL.1MSSQLBackupReportServer_backup_200703081800.trn'' WITH NOFORMAT, NOINIT, NAME = N''ReportServer_backup_20070308180002'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [ReportServerTempDB] TO DISK = N''E:SQL ServerDatabase ServicesMSSQL.1MSSQLBackupReportServerTempDB_backup_200703081800.trn'' WITH NOFORMAT, NOINIT, NAME = N''ReportServerTempDB_backup_20070308180002'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [TfsWorkItemTracking] TO DISK = N''E:SQL ServerDatabase ServicesMSSQL.1MSSQLBackupTfsWorkItemTracking_backup_200703081800.trn'' WITH NOFORMAT, NOINIT, NAME = N''TfsWorkItemTracking_backup_20070308180002'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [TfsIntegration] TO DISK = N''E:SQL ServerDatabase ServicesMSSQL.1MSSQLBackupTfsIntegration_backup_200703081800.trn'' WITH NOFORMAT, NOINIT, NAME = N''TfsIntegration_backup_20070308180003'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [TfsVersionControl] TO DISK = N''E:SQL ServerDatabase ServicesMSSQL.1MSSQLBackupTfsVersionControl_backup_200703081800.trn'' WITH NOFORMAT, NOINIT, NAME = N''TfsVersionControl_backup_20070308180003'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [TfsWorkItemTrackingAttachments] TO DISK = N''E:SQL ServerDatabase ServicesMSSQL.1MSSQLBackupTfsWorkItemTrackingAttachments_backup_200703081800.trn'' WITH NOFORMAT, NOINIT, NAME = N''TfsWorkItemTrackingAttachments_backup_20070308180003'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [TfsActivityLogging] TO DISK = N''E:SQL ServerDatabase ServicesMSSQL.1MSSQLBackupTfsActivityLogging_backup_200703081800.trn'' WITH NOFORMAT, NOINIT, NAME = N''TfsActivityLogging_backup_20070308180003'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [TfsBuild] TO DISK = N''E:SQL ServerDatabase ServicesMSSQL.1MSSQLBackupTfsBuild_backup_200703081800.trn'' WITH NOFORMAT, NOINIT, NAME = N''TfsBuild_backup_20070308180003'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [STS_Config_TFS] TO DISK = N''E:SQL ServerDatabase ServicesMSSQL.1MSSQLBackupSTS_Config_TFS_backup_200703081800.trn'' WITH NOFORMAT, NOINIT, NAME = N''STS_Config_TFS_backup_20070308180003'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [STS_Content_TFS] TO DISK = N''E:SQL ServerDatabase ServicesMSSQL.1MSSQLBackupSTS_Content_TFS_backup_200703081800.trn'' WITH NOFORMAT, NOINIT, NAME = N''STS_Content_TFS_backup_20070308180003'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [TFSWarehouse] TO DISK = N''E:SQL ServerDatabase ServicesMSSQL.1MSSQLBackupTFSWarehouse_backup_200703081800.trn'' WITH NOFORMAT, NOINIT, NAME = N''TFSWarehouse_backup_20070308180003'', SKIP, REWIND, NOUNLOAD, STATS = 10

Back Up Database (Transaction Log) (TEAMSERVER)
Backup Database on Target server connection
Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped.
Databases: All user databases
Type: Transaction Log
Append existing
Task start: 2007-03-08T18:00:03.
Task end: 2007-03-08T18:00:03.
Failed:(-1073548784) Executing the query "BACKUP LOG [ReportServerTempDB] TO DISK = N'E:\SQL Server\Database Services\MSSQL.1\MSSQL\Backup\ReportServerTempDB_backup_200703081800.trn' WITH NOFORMAT, NOINIT, NAME = N'ReportServerTempDB_backup_20070308180002', SKIP, REWIND, NOUNLOAD, STATS = 10
" failed with the following error: "The statement BACKUP LOG is not allowed while the recovery model is SIMPLE. Use BACKUP DATABASE or change the recovery model using ALTER DATABASE.
BACKUP LOG is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.

Command:BACKUP LOG [ReportServer] TO DISK = N''E:SQL ServerDatabase ServicesMSSQL.1MSSQLBackupReportServer_backup_200703081800.trn'' WITH NOFORMAT, NOINIT, NAME = N''ReportServer_backup_20070308180002'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [ReportServerTempDB] TO DISK = N''E:SQL ServerDatabase ServicesMSSQL.1MSSQLBackupReportServerTempDB_backup_200703081800.trn'' WITH NOFORMAT, NOINIT, NAME = N''ReportServerTempDB_backup_20070308180002'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [TfsWorkItemTracking] TO DISK = N''E:SQL ServerDatabase ServicesMSSQL.1MSSQLBackupTfsWorkItemTracking_backup_200703081800.trn'' WITH NOFORMAT, NOINIT, NAME = N''TfsWorkItemTracking_backup_20070308180002'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [TfsIntegration] TO DISK = N''E:SQL ServerDatabase ServicesMSSQL.1MSSQLBackupTfsIntegration_backup_200703081800.trn'' WITH NOFORMAT, NOINIT, NAME = N''TfsIntegration_backup_20070308180003'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [TfsVersionControl] TO DISK = N''E:SQL ServerDatabase ServicesMSSQL.1MSSQLBackupTfsVersionControl_backup_200703081800.trn'' WITH NOFORMAT, NOINIT, NAME = N''TfsVersionControl_backup_20070308180003'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [TfsWorkItemTrackingAttachments] TO DISK = N''E:SQL ServerDatabase ServicesMSSQL.1MSSQLBackupTfsWorkItemTrackingAttachments_backup_200703081800.trn'' WITH NOFORMAT, NOINIT, NAME = N''TfsWorkItemTrackingAttachments_backup_20070308180003'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [TfsActivityLogging] TO DISK = N''E:SQL ServerDatabase ServicesMSSQL.1MSSQLBackupTfsActivityLogging_backup_200703081800.trn'' WITH NOFORMAT, NOINIT, NAME = N''TfsActivityLogging_backup_20070308180003'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [TfsBuild] TO DISK = N''E:SQL ServerDatabase ServicesMSSQL.1MSSQLBackupTfsBuild_backup_200703081800.trn'' WITH NOFORMAT, NOINIT, NAME = N''TfsBuild_backup_20070308180003'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [STS_Config_TFS] TO DISK = N''E:SQL ServerDatabase ServicesMSSQL.1MSSQLBackupSTS_Config_TFS_backup_200703081800.trn'' WITH NOFORMAT, NOINIT, NAME = N''STS_Config_TFS_backup_20070308180003'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [STS_Content_TFS] TO DISK = N''E:SQL ServerDatabase ServicesMSSQL.1MSSQLBackupSTS_Content_TFS_backup_200703081800.trn'' WITH NOFORMAT, NOINIT, NAME = N''STS_Content_TFS_backup_20070308180003'', SKIP, REWIND, NOUNLOAD, STATS = 10
GO
BACKUP LOG [TFSWarehouse] TO DISK = N''E:SQL ServerDatabase ServicesMSSQL.1MSSQLBackupTFSWarehouse_backup_200703081800.trn'' WITH NOFORMAT, NOINIT, NAME = N''TFSWarehouse_backup_20070308180003'', SKIP, REWIND, NOUNLOAD, STATS = 10

And here it is after the KB934458 has been applied:

Code Snippet

NEW COMPONENT OUTPUT
Microsoft(R) Server Maintenance Utility (Unicode) Version 9.0.3054
Report was generated on "TEAMSERVER".
Maintenance Plan: TfsTransactionLogBackup
Duration: 00:00:06
Status: Warning: One or more tasks failed..
Details:
Back Up Database (Transaction Log) (TEAMSERVER)
Backup Database on Target server connection
Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped.
Databases: All user databases
Type: Transaction Log
Append existing
Task start: 2007-05-01T08:00:03.
Task end: 2007-05-01T08:00:04.
Failed:(0) Database 'ReportServer' will not be backed up because it does not have its recovery model set to Full or BulkLogged.

Back Up Database (Transaction Log) (TEAMSERVER)
Backup Database on Target server connection
Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped.
Databases: All user databases
Type: Transaction Log
Append existing
Task start: 2007-05-01T08:00:03.
Task end: 2007-05-01T08:00:04.
Failed:(0) Database 'ReportServerTempDB' will not be backed up because it does not have its recovery model set to Full or BulkLogged.

Back Up Database (Transaction Log) (TEAMSERVER)
Backup Database on Target server connection
Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped.
Databases: All user databases
Type: Transaction Log
Append existing
Task start: 2007-05-01T08:00:04.
Task end: 2007-05-01T08:00:04.
Failed:(-1073548784) Executing the query "BACKUP LOG [ReportServer] TO DISK = N'E:\SQL Server\Database Services\MSSQL.1\MSSQL\Backup\ReportServer_backup_200705010800.trn' WITH NOFORMAT, NOINIT, NAME = N'ReportServer_backup_20070501080004', SKIP, REWIND, NOUNLOAD, STATS = 10
" failed with the following error: "The statement BACKUP LOG is not allowed while the recovery model is SIMPLE. Use BACKUP DATABASE or change the recovery model using ALTER DATABASE.
BACKUP LOG is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.

Back Up Database (Transaction Log) (TEAMSERVER)
Backup Database on Target server connection
Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped.
Databases: All user databases
Type: Transaction Log
Append existing
Task start: 2007-05-01T08:00:04.
Task end: 2007-05-01T08:00:04.
Failed:(-1073548784) Executing the query "BACKUP LOG [ReportServerTempDB] TO DISK = N'E:\SQL Server\Database Services\MSSQL.1\MSSQL\Backup\ReportServerTempDB_backup_200705010800.trn' WITH NOFORMAT, NOINIT, NAME = N'ReportServerTempDB_backup_20070501080004', SKIP, REWIND, NOUNLOAD, STATS = 10
" failed with the following error: "The statement BACKUP LOG is not allowed while the recovery model is SIMPLE. Use BACKUP DATABASE or change the recovery model using ALTER DATABASE.
BACKUP LOG is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly

.

View 13 Replies View Related

Unable To Take Differential Or Transaction Log Backups

Dec 7, 2007

Hello SQL Server 2005 SE sp1.
Unable to take differential or transaction log backups. Get the error message a full backup need to be down. Have done a full backup. Immediately upon completion of full have tried diff and transaction log. Still no luck
Other databases on server are fine. Full backup will restore.

Thanks,

Joe

View 2 Replies View Related

Load SQL 7 Database And Transaction Log Backups To SQL 2000

Jul 20, 2005

Is it possible to load both the SQL 7 database and transaction logbackups to SQL 2000 ? I assume it will perform the upgrade during theload.Thanks,James

View 4 Replies View Related

Maintenance Plans Not Deleting Old Transaction Log Backups

Jan 31, 2007

I'm the dba for a large company and have setup many maintenance plans for our sql servers. One of the options I have set is to delete old backups of databases and transaction logs after 2 days. For some reason, the old database backups are being deleted, but the old transaction logs backups are not. I have them being put in the same directory. Anybody have any ideas why this is happening and what if any fix is available?

View 1 Replies View Related

Logshipping Problem With Naming Transaction Log Backups

Oct 11, 2006

Hey, my logshipping is working just fine but the name of the backup file is of a concern to me. It's using the name in the format of DbName_20061011200002.trn. I know 20061011 is the date. That's fine. 2000 is supposed to be the time but it's giving the wrong time. It's supposed to be 1500 because the time right now is 3pm. And I dont know why the last 2 digits before the .trn are for. Is this something new in SQL 2005 logshipping? SQL 2000 didn't have it. Thank you.

View 4 Replies View Related

Recovery :: Log Shipping Transaction Log Backups Not Being Deleted On Primary

Oct 12, 2015

I've got log shipping set up, and everything seems to be working fine, but the log files are not being deleted from the primary server despite configuring log shipping to retain them for 3 days. I see no errors concerning the log shipping, but did not configure a monitor. What process is responsible for deleting the older log backups, and how can I look for errors. I could simply set up a jog to delete the older files, but that will only mask the issue.

View 3 Replies View Related

SQL Server 2008 :: Backup Device Creating Backups With A New Transaction Log For Each Day

Jun 19, 2015

Having a lot of problems with backup device creating backups with a new transaction log for each day. This is causing the backups to grow way to fast. Seems to be random with our clients. Created new device backups but getting same problem. A manual backup selecting overwrite all existing backup sets will fix it. But starts the cycle all over again.

View 9 Replies View Related

Pros And Cons Of Using Transaction Replication Doing Initialization From Database Backups

Jun 27, 2007

I am using transaction replication between a transaction and reporting database server. When I use a snapshot to initialize my subscribers, I currently get a lot of deadlocks during the snapshot creation. I am considering using a database backup instead. Can anyone tells me how to reduce the table locks that I am getting during snapshot creation or advice on using database backups?

View 1 Replies View Related

Error 8525: Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.

May 31, 2008

Hi All

I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.

If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.

I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.

set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN

It's got me stumped, so any ideas gratefully received.Thx

View 1 Replies View Related

SSIS, Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.

Feb 22, 2007

I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.

for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.

I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.

if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.

and

Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.

Please help me it's very urgent.

View 3 Replies View Related

Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.

Feb 6, 2007

I am getting this error :Distributed transaction completed. Either enlist this session in a new
transaction or the NULL transaction. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: Distributed transaction completed. Either
enlist this session in a new transaction or the NULL transaction.have anybody idea?!

View 1 Replies View Related

Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.

Dec 22, 2006

i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.

Message is like this:

Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.

View 8 Replies View Related

Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction. (HELP)

Jan 8, 2008

Hi,

i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".

my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.

Thanks in advance.

View 2 Replies View Related

SQL Server Admin 2014 :: Restore Lost Transaction From Transaction Log File

Jun 10, 2015

I have Full database backup upto previous day and transaction logfile of Today transaction. my database has crashed. I have restored previous day's Full backup. I have faced difficulty to restore today's transaction from today's transaction log. What are the steps to restore full database back and one day's transaction log file. Note: there is no differential database backup and transaction backup.

View 8 Replies View Related

I Need Away To Show The Pending Transaction From Transaction Replication In A User Friendly Format.

Jul 11, 2007

I want to list out the pending transaction for transaction replication by publication.

Help needed.

View 1 Replies View Related

TRANSACTIONS In SSIS (error: The ROLLBACK TRANSACTION Request Has No Corresponding BEGIN TRANSACTION.

Nov 14, 2006

I'm receiving the below error when trying to implement Execute SQL Task.

"The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION." This error also happens on COMMIT as well and there is a preceding Execute SQL Task with BEGIN TRANSACTION tranname WITH MARK 'tran'

I know I can change the transaction option property from "supported" to "required" however I want to mark the transaction. I was copying the way Import/Export Wizard does it however I'm unable to figure out why it works and why mine doesn't work.

Anyone know of the reason?

View 1 Replies View Related

Analysis :: Find Amount Distribution Across Different Transaction Types Under Spend Transaction

Jul 27, 2015

I created a Calculated measure in cube something like this : ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount]). To get only spend transactions. Now, I want to slice this measure with same hierarchy to find the amount distribution across different transaction types under spend transaction. But this query behaving like the measure doesn't have relation with measure.

you can think this as below query:
WITH
MEMBER SPEND AS ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount])
SELECT NON EMPTY {SPEND} ON 0
,NON EMPTY ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent]) ON 1
FROM [CUBE]

View 6 Replies View Related