I am having problems when I enable transactions on a container and run my SSIS package on a workstation (as opposed to running it directly on the SQL Server). I have created a simple package consisting of four tasks
View 9 RepliesHi all,I am trying to setup a VB.Net development environment on my desktop for one of the application which was already in the production for couple of years (some unknown contractor(s) developed and maintained it so far). The application works fine on the web.Visual Studio 2005, .Net 2.0, SQL 2000, SQL Server 2005 were installed on my desktop. When I try to build the entire application/solution in the debug mode (i.e., with http://localhost/), build succeeds and I could get to the login.aspx. When I try to login, I am getting an error in the Visual Studio at the following code;connection = New SqlConnection(connectionString)
connection.Open()
saying "Communication with the underlying transaction manager has failed", "System.Transactions.TransactionManagerCommunicationException was unhandled by user code". And the web browser displays the following error "Error HRESULT E_FAIL has been returned from a call to a COM component". When I try to connect the SQL Server 2005 with the same ConnectionString attributes by going to Tools>Connect to Database, it works fine. But, through application connection.Open() giving above errors. I have set the MSDTC properties (i.e., under Component Services>MyComputer Properties>Security Configuration) as below:-Enabled Network DTC Access, Allow Remote Clients, Allow Remote Administration, Allow Inbound, Allow Outbound, No Authentication required - selected, Enabled XA Transactions...& DTC Logon Account is "NT AUTHORITYNetworkService".Please help.Thanks in advance,Chandra
Does anybody know what it means?
The context is: a package with a single Data Flow finishes with this error: [Connection manager "xxx"] Error: The connection manager failed to defect from the transaction.
All components inside the data flow reports a successfull green status, however the DataFlow Task remains yellow for a long time, when suddenly the package stops with the above message. Another information is that the table remains locked during package execution (a select on that table does not complete...). This is a serious issue, and I couldnt find any relevant information about that. Thanks in advance.
Hello out there in SQL land! I'm writing a T-SQL script to create tables and grantlogins to local machine NT accounts. The problem is that I'm sending this script out to about 1700 machines with 1700 different DomainNames!
So hard-coding the domainusername is NOT an option. In other words, non-networked computers. In the T-SQL command:
EXEC sp_grantlogin [DomainUsername]
-OR-
EXEC sp_grantdbaccess [DomainUsername]
note: Domain= @@SERVERNAME
Username = Jib
I want to have a variable of some sort pass the DomainName & concatenated username in order to grant login the SQL Server for the NT user. Any help would be greatly appreciated.
Thanks!
Hi All
I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.
If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.
I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.
set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN
It's got me stumped, so any ideas gratefully received.Thx
Hi,
I am working on SQL Server 2005 (x64) with Windows Server 2003 (x64) operating system. I am having a major issue in SSIS. Here is the detailed explanation of the issue :
I have an EXCEL file in 2003 / 2007 version. It contains some data. I want to import the data using SSIS into SQL Server 2005 (x64) database table. I have taken "EXCEL FILE SOURCE" and "SQL Server DESTINATION". It was failed on importing data. Surprisingly it works fine in SQL Server 2005 (x32). Can you please explain why it is NOT woking on (x64) ?
Here is the error code i am getting:
[Excel Source [1]] Error: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.
Appreciate your time and patience !!
Thanks
I am trying to create a script file that will get me the total number of orders in july. How exactly would i say july because i know my syntax is wrong and I would be using sum instead of count right?
What i tried
use Cis11101_Northwind
Declare @Julycount int
Set @Julycount= (Select sum(*) From orders Where OrderDate = 'july')
print 'The total orders for july is ' + Cast(@JulyCount as varchar)
SSIS doesn`t start after applying SQL Server 2005 SP1
I get an error Message in event log
event id 7000 source: Service Control Manager Type: Error
Message:
The SQL Server Integration Services service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
regards
Lothar Belle
I am trying to do something simple to test TransactionOption. I have a ScriptTask (out of the box), which runs fine. To test TransactionOption, I set the Package Properties TransactionOption = Required. Straight away the package fails with the following message
Error: The SSIS Runtime has failed to start the distributed transaction due to error 0x8004D01B "The Transaction Manager is not available.". The DTC transaction failed to start. This could occur because the MSDTC Service is not running.
I am running this on my Laoptop, which has XP Pro with SP2.
I checked the services and MSDTC and it is running fine. I have checked the Event Viewer and saw the following messages... One is Information and the other is Error
Information (Disk - Event ID 2444)
----------------------------------------------
MSDTC started with the following settings:
Security Configuration (OFF = 0 and ON = 1):
Network Administration of Transactions = 0,
Network Clients = 0,
Inbound Distributed Transactions using Native MSDTC Protocol = 1,
Outbound Distributed Transactions using Native MSDTC Protocol = 1,
Transaction Internet Protocol (TIP) = 0,
XA Transactions = 0
Error (Devices - Event ID 4437)
------------------------------------------------
The account that the MS DTC service is running under is invalid. This can happen if the service account information has been changed using the Services snap-in in Microsoft Management Console (MMC). MS DTC service will continue to start. Please make sure that the MS DTC service account information is updated using the Component Services Explorer.
I have checked Component Services. All looks fine from what I can see.
Anyone else came across this?
Thanks
Sutha
I'm receiving the below error when trying to implement Execute SQL Task.
"The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION." This error also happens on COMMIT as well and there is a preceding Execute SQL Task with BEGIN TRANSACTION tranname WITH MARK 'tran'
I know I can change the transaction option property from "supported" to "required" however I want to mark the transaction. I was copying the way Import/Export Wizard does it however I'm unable to figure out why it works and why mine doesn't work.
Anyone know of the reason?
I have a Rounding error: Between flat file connection manager Source & OLE DB Connection Destination (SQL Server 2005) in my Dataflow.
File looks like this lets call column names Col A,B,C,D
70410000 RD1 1223631.92 196042.42
70329000 ICD 11025.84 3353.88
71167300 COL 104270.59 24676.96
flat file connection manager settings: first row Column names then Advanced tab Col A float , Col B float , Col C string ,Col D float ,
OLE DB Connection Destination (SQL Server 2005)
CREATE TABLE [dbo].[PT_CUST_ABR](
[PARTY_NO] [float] NULL,
[PARTY_NAME] [varchar](75) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[TELECOMABR] [float] NULL,
[GENIABR] [float] NULL,
Problem: ColA (Source) Rounding error to PARTY_NO (Destination)
I have a field of text of in a flat file that the flat file connection manager Source picks up correctly €œ70000893€?
However when it gets the OLE DB Connection Destination the data has changed to 70000896. That€™s before its even Written to the database.
The only clue that something is wrong in the middle is the great Data viewer shows the number as 7.000009E+07
Other clues looking at the data it appears there is a rounding error on only the number that dont end in 00
ColA (Source) PARTY_NO (Destination)
71167300 71167296
70329000 70329000
70410000 70410000
Any ideas people?
Thanks in advance
Dave
I am using SSIS 2005 on Windows 2003 server. Using Excel Source to dump the data for staging database.
I am getting following error while I execute it through BI studio's execute button.
Please help.
- Sachin
I have deployed my packages into Sql Server and I am using Configuration File. As my Data Source is Excel, I have changed the connection string during deployment with Server Path. But I am getting the following errors. Actually the File Exist in Path. May I know What is cause of the issue? Do I need to give any permission to execute the package.
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
component "Excel Source Service Contract Upload" (1) failed validation and returned error code 0xC020801C.
One or more component failed validation.
There were errors during task validation.
DTS_E_OLEDBERROR, Error Code: 0x80004005 Source: "MS JET DB Engine" Description : Path is not valid
I'm trying to run an SSIS package. The package runs on an SQL 2005 server on Win2k3 server. The package tries to connect to another win2k3 server with sql 2000 to retrieve some data. However, I recieve the errormessage shown in the topic.
I found info about modifying the MSDTC security settings under "component services" and did so. I made sure everything was allowed. However, the result was the same. Does anyone have any other idéa about what could cause this problem?
PS. The package works fine if I set up both databases on the same physical machine...
Regards Andreas
Hi All, I am using the CSLA framework for the data access with SQL Server 2005 and we are not using distributed transaction. When we are using this architecture for our local machine it is working fine and our DB is in local machine itself.
But I am getting the following error in our development server and our DB is in the Network. " DataPortal.Fetch failed
(DataPortal.Fetch failed (DataPortal.Fetch failed (Network access for
Distributed Transaction Manager (MSDTC) has been disabled. Please enable DTC for
network access in the security configuration for MSDTC using the Component
Services Administrative tool.))) ---> DataPortal_Fetch method call failed
---> DataPortal.Fetch failed (DataPortal.Fetch failed (Network access for
Distributed Transaction Manager (MSDT... Procedure Script call failed." Please help me out to get rid of it. Your help would be appreciated.
RegardsGomaz
When my production server processing some queries suddenly the SQL Server service crashed and following error was in the error log:
SQL Server Internal Error. Text manager cannot continue with current statement.
The server is running SQL Server 2000 with SP4.
I am really concerned because this is a production sever and there are over 300 users access concurrently.
Please help me to find a solution.
Thanks,
Roshan.
Hi,all BI experts here,
Thank you very much for your kind attention.
I am having a problem with connecting to SQL Server 2005 database from Office Business Scorecard Manager 2005 (the connection string i am using is: provider=SQLOLEDB;Data source=server_name; Initial catalog=database_name). But the connection failed. Would please any experts here shed me any light on what is the problem and how to fix it then? As there is no any forum for Office Business Scrorecard manager 2005. Therefore I post my thread here as it is related to the connection to SQL Server 2005 database engine, thought here is the best place for this question.
Thank you very in advance for your kind advices and help. And I am looking forward to hearing from you soon.
With best regards,
Yours sincerely,
Hi all,
can anyone tell me if an oleDb connection (provider is Jet 4.0 to Access database) can be enlisted in a Distributed Transaction?
The goal is to copy data from SqlServer to Access within a transaction.
Pier
I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.
for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.
I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.
if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
and
Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.
Please help me it's very urgent.
I am getting this error :Distributed transaction completed. Either enlist this session in a new
transaction or the NULL transaction. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: Distributed transaction completed. Either
enlist this session in a new transaction or the NULL transaction.have anybody idea?!
i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.
Message is like this:
Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
Hi,
i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".
my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.
Thanks in advance.
I installed Visual Studio 2005 Professional then after that was installed and running, I tried to install the the SQL Server 2005 Developer's Edition which installed but I do not get the SQL Server 2005 Studio Manager. I have remove and reinstalled but it never gets installed. Any ideas?
Chuck
Ok I just installed VS 2005 Pro with that it asked me to install SQL 2005 and I said yes. Now I can't find the Enterprise Manager to create a database --weired-- All I see is configuration tools under SQL Server 2005. Am I missing something here? Thanks.
View 3 Replies View RelatedI just downloaded SQL 2005 Enterprise Edition and I cannot find Enterprise Manager, which is a feature of SQL 2000. I do not know how to create a database, a table, etc without it. How do I do get enterprise manager.
Thanks.
HelloI have reinstalled MS SQL 2005 developer edition with ALL components, but I cant find anywhere the database manager ! where am i supposed to find it ? what is the name ?actually I can only find >>http://images2.hiboox.com/images/3907/hu01t4rq.jpgwhat must be installed : Server components, tools, Books Online, and samplesorRun the SQL Native Client Installation Wizard?thank you for helping
View 2 Replies View RelatedEvery morning it takes about 30 seconds to load Report Manager on the server.
(But of course next loading is within speed of light ).
Any ideas how to decrease load time?
I am getting the following error when trying to access SQL from a win98 machine. "SQL connection manager is not running at specified port number" What does this mean?
View 1 Replies View RelatedHi All,
Sqlserver 7.
From the Enterprise Manager when i right click on a table and select
Return all row. I am getting the below error
An unexpected error happened during this operation.
[Query]- Query Designer encountered a Query error: Unspecified error
When i use Query Analyser i am able to retrive the Data
Pls help Its Urgent
TIA
Adil
I have seen this issue in other posts, but I've never seen a way to fix it.
When I try to access the Report Manager, I get the following:
Server Error in '/Reports' Application.
Could not load file or assembly 'ReportingServicesWebServer' or one of its dependencies. The system cannot find the file specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: Could not load file or assembly 'ReportingServicesWebServer' or one of its dependencies. The system cannot find the file specified.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'ReportingServicesWebServer' could not be loaded.
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLMSoftwareMicrosoftFusion!EnableLog].
Stack Trace:
[FileNotFoundException: Could not load file or assembly 'ReportingServicesWebServer' or one of its dependencies. The system cannot find the file specified.]
System.Reflection.Assembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0
System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +211
System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +141
System.Reflection.Assembly.Load(String assemblyString) +25
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +32
[ConfigurationErrorsException: Could not load file or assembly 'ReportingServicesWebServer' or one of its dependencies. The system cannot find the file specified.]
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +596
System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +70
System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) +177
System.Web.Compilation.BuildProvidersCompiler..ctor(VirtualPath configPath, Boolean supportLocalization, String outputAssemblyName) +180
System.Web.Compilation.ApplicationBuildProvider.GetGlobalAsaxBuildResult(Boolean isPrecompiledApp) +3446629
System.Web.Compilation.BuildManager.CompileGlobalAsax() +51
System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled() +462
[HttpException (0x80004005): Could not load file or assembly 'ReportingServicesWebServer' or one of its dependencies. The system cannot find the file specified.]
System.Web.Compilation.BuildManager.ReportTopLevelCompilationException() +57
System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled() +612
System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters) +456
[HttpException (0x80004005): Could not load file or assembly 'ReportingServicesWebServer' or one of its dependencies. The system cannot find the file specified.]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +3426855
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +88
System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +149
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
I am using SSE2005 SP2
What can I do to fix this? This is a production server that is very precisely configured, so I can't just format and reinstall everything (this would take DAYS)
Please please help!!! : )
Hi, I am new to Sql Server 2005. I have worked previously in Sql Server 2000. I want to know if Enterprise Manager exists in Sql Server 2005. If yes, then where? Regards,ap.
View 2 Replies View RelatedI have uninstall MS SQL 2000 and installed MS SQL 2005, but i cant find nowhere the service manager to run the server
where is it ?
thank you
Is it true that the Report Manager is not designed to be run on non-IE browsers like Firefox etc?
I can't even view a proper report if it's launched by Firefox......:eek: