Transaction Open
Jul 6, 2004Hi
How do we will know whether transaction is open or closed.
Nageswar
ADVERTISEMENT
No Active Open Transaction
Jun 8, 2015I was expecting this to return an active transaction
begin transaction
select * from table1
dbcc opentran
(no COMMIT or ROLLBACK)
Find And Rollback An Open Transaction
Oct 15, 2007We have a locked table and all I need is a way to show all open trans, so I can roll teh offender back
View 1 Replies View RelatedTransaction Left In Open State On SQLServer 2000 And JDBC
Sep 6, 2007I have a problem where my connection always has an open transaction as viewed by activity monitor.
I am using the latest MS SQL Server 2005 JDBC driver (1.1) and connecting to SQL Server 2000.
This issue arises only when selectMethod=cursor and autoCommit is set to false. This issue does not exist when I connect to SQL Server 2005.
Has anyone else seen this issue?
How can this issue be resolved?
Thanks
Peter
Open Transaction With Sleeping Status And Wait Type As AWAITING COMMAND
Sep 4, 2015During our DR drill we found that the same code which used to run perfectly fine on our Primary Data Centre is running very slow on Disaster Recovery DB Server and there are Lot's of open transaction with sleeping status and waittype as 'AWAITING COMMAND'.CPU, Memory and disk utilization are good. The ping reply between the app server and the DB server is well within the limit's even blocking is not their, also nothing is reported in the error logs. We are using SQL server 2014 STD 64 BIT on Windows Server 2012.
View 6 Replies View RelatedError 8525: Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.
May 31, 2008Hi All
I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.
If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.
I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.
set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN
It's got me stumped, so any ideas gratefully received.Thx
SSIS, Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.
Feb 22, 2007I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.
for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.
I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.
if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
and
Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.
Please help me it's very urgent.
Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.
Feb 6, 2007I am getting this error :Distributed transaction completed. Either enlist this session in a new
transaction or the NULL transaction. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: Distributed transaction completed. Either
enlist this session in a new transaction or the NULL transaction.have anybody idea?!
Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.
Dec 22, 2006i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.
Message is like this:
Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction. (HELP)
Jan 8, 2008Hi,
i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".
my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.
Thanks in advance.
Cannot Open User Default Database. Login Failed. (only When IDE Is Open)
Sep 7, 2007I get the below error only when my IDE open. It connects well when it is found closed.
[SqlException (0x80131904): Cannot open user default database. Login failed.Login failed for user 'JPASPNET'.]
I could solve this by giving the logged in windows user to impersonate under IIS window > WEBSITE > ASP.NET tab > EDIT CONFIG > APPLICATION tab
But I wish someone could give me the proper solution.
I almost tried all from giving ASPNET user as a administrator to configuring the same in Express management tool.
Environment: XP pro, VWD and SQL Express
Leave The Connection Open Or Always Open And Close Immediately?
Jun 7, 2006Hi there,
I got an approach like that:
1) Read something from DB - check the value, if true stop if false go on2) Read the second Value (another SQL Statement) - check the value etc.
Now I could open the connection at 1) and if I have to go to 2) I leave the connection open and use the same connection at 2). Is it ok to do that?
The other scenario would be opening a connection at 1), immediately close it after I read the value and open a new connection at 2).
Thanks for the input!
Unable To Open New Query Window Or Open Any Table
Nov 3, 2014Post installation of SQL Server 2014 Express edition, I am able to connect to the Database Instance.
But while opening a new query window in SSMS or opening a table getting the error:
Package 'RadLangSvc.Package, RadLangSvc, Version 12.0.0.0, Culture=Neutral, Public Token=89845dcd8080cc91' failed to load
Object reference not set to an instance of an object. (mscorlib)..Have already tried installing the componentsDACProjectSystemSetup_enu.msi, TSql LanguageService_enu.msi, DACFramework_enu.msi from path VS 2010 WCU DAC.
Open Report In New Window: Window.open Method Gives Error
Jun 26, 2006
Hi,
I am using SSRS Microsoft SQL Server Reporting Services Designers
Version 9.00.1399.00. I want to open linked report in new window.
I tried whats mentioned in http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=240172&SiteID=1 but i get an error on Window.Open method.
How do I solve the problem?
Thanks
SQL Server Admin 2014 :: Restore Lost Transaction From Transaction Log File
Jun 10, 2015I have Full database backup upto previous day and transaction logfile of Today transaction. my database has crashed. I have restored previous day's Full backup. I have faced difficulty to restore today's transaction from today's transaction log. What are the steps to restore full database back and one day's transaction log file. Note: there is no differential database backup and transaction backup.
View 8 Replies View RelatedI Need Away To Show The Pending Transaction From Transaction Replication In A User Friendly Format.
Jul 11, 2007
I want to list out the pending transaction for transaction replication by publication.
Help needed.
TRANSACTIONS In SSIS (error: The ROLLBACK TRANSACTION Request Has No Corresponding BEGIN TRANSACTION.
Nov 14, 2006I'm receiving the below error when trying to implement Execute SQL Task.
"The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION." This error also happens on COMMIT as well and there is a preceding Execute SQL Task with BEGIN TRANSACTION tranname WITH MARK 'tran'
I know I can change the transaction option property from "supported" to "required" however I want to mark the transaction. I was copying the way Import/Export Wizard does it however I'm unable to figure out why it works and why mine doesn't work.
Anyone know of the reason?
Analysis :: Find Amount Distribution Across Different Transaction Types Under Spend Transaction
Jul 27, 2015I created a Calculated measure in cube something like this : ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount]). To get only spend transactions. Now, I want to slice this measure with same hierarchy to find the amount distribution across different transaction types under spend transaction. But this query behaving like the measure doesn't have relation with measure.
you can think this as below query:
WITH
MEMBER SPEND AS ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount])
SELECT NON EMPTY {SPEND} ON 0
,NON EMPTY ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent]) ON 1
FROM [CUBE]
How Do I Make Use Of Begin Transaction And Commit Transaction In SSIS.
Jun 1, 2007Hi
How do I make use of begin transaction and commit transaction in SSIS.
As am not able to commit changes due to certain update commands I want to explicitly write begin and commit statements. but when i make use of begin and commit in OLEDB commnad stage it throws an error as follows:
Hresult:0x80004005
descriptionyntax error or access violation.
its definately not an syntax error as i executed it in sql server. also when i use it in execute sql task out side the dataflow container it doesnt throw any error but still this task doesnt serve my purpose of saving/ commiting update chanages in the database.
Thanks,
Prashant
Keep A Few Connections Open All The Time Or Open/close Connections On The Fly?
Jul 20, 2005Just a quick question about connection management. My application willnever need more than 1 or 2 connections about at any given time. Also, I donot expect many users to be connected at any given time. For efficiency, Iwould like to keep connections alive throughout the lifetime of the objectsrequiring them, rather than opening a new connection, executing code andthen closing it again. What is the most efficient way of doing this?Should I perform the open/close or just one open when I create the objectand a close when I dispose of it?
View 1 Replies View RelatedSql2005:Cannot Use SAVE TRANSACTION Within A Distributed Transaction
Oct 10, 2005Error returned when trying to commit the transaction to a database that is a replication distributor. (sql2005 ctp16)
View 10 Replies View RelatedProblem With SSIS Transaction...Transaction Scope
Jun 1, 2006
Hi,
I am having some problem with SSIS transaction. Eventhought I tried to imitate the concept that Jamie presented at http://www.sqlservercentral.com/columnists/jthomson/transactionsinsqlserver2005integrationservices.asp
. My workflow is as followed
*********************************
For Each ADO.Record in Oracle (transaction=not supported)
If (Certain_Field_Value = 'A')
Lookup Data in SQL DB with values from Oracle (transaction=not supported)
DO Sequence A (Start a Transaction , transaction=required)
INSERT/UPDATE some records in SQLDB(transaction=supported)
Finish Sequence A ( transaction should stop here)
UPDATE Oracle DB ( Execute SQLTask, transaction=not supported)
If (Certain_Field_Value = 'B')
Lookup Data in SQL DB with values from Oracle (transaction=not supported)
DO Sequence B (Start a Transaction , transaction = required)
INSERT/UPDATE some records in SQLDB (transaction=supported)
Finish Sequence A ( transaction should stop here)
UPDATE Oracle DB ( Execute SQLTask, transaction=not supported)
If (Certain_Field_Value = 'C')
------------
------------
End ForEach Loop
*************************************
My requirements are that I want separate transaction for each Sequence A, B, C, etc... If Sequence A transaction fails, the other should still be continuing with another transaction.
But I am getting an error regarding the OLEDB Error in next Task (e.g in Certain_Field_Value = 'B') "Lookup Data in SQL DB with values from Oracle ", the error message is ".......Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction. ".
What is it that I am doing wrong?
Regards
KyawAM
New Transaction Cannot Enlist In The Specified Transaction Coordinator
Nov 28, 2004I'm getting this error:
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].
http://support.microsoft.com/kb/839279 this didn't help
any suggestions?
BEGIN TRANSACTION And COMMIT TRANSACTION
Oct 11, 2000I am executing a stored procedure something like this
Create Procedure TEST
@test1
@test2
AS
BeGIN TRANSACTION ONE
SELECT...
UPDATE..
....
....
....
TRUNCATE
etc and lot of Select,update and delete statements like this
.....
COMMIT TRANSACTION ONE
The Block of code which I have b/w BEGIN TRANSACTION AND COMMIT TRANSACTION ..Will it be rolled back
if it encounters any errors in the SELECT,UPPDATE,DELETE ..statements which I have with the transaction one.
IF not How do I roll back if it encounters any erros b/w the BEGIN TRANSACTION and END TRANSACTION.
Thanks
micky
New Transaction Cannot Enlist In Transaction Coordinator (was Please Help...)
Apr 18, 2005Hi all,
In my ASP application, I've been using this code:
----------------------------------------------
dim conn, connectionstring
connectionstring= "Provider=SQLOLEDB.1; Data Source = blahblah; Initial Catalog = abc; User Id = osss; Password=xxx"
set conn = server.CreateObject("adodb.connection")
conn.open connectionstring
----------------------------------------------
It's just basically to set up the connection to the SQL server, it works on my other pages, but on a few pages, the last line (conn.open connectionstring) triggers this error:
"Microsoft OLE DB Provider for SQL Server error '8004d00a'
New transaction cannot enlist in the specified transaction coordinator. "
I've never encountered this error before and I couldn't think of any solution... please help!!!
Thanks so much,
Annie
BEGIN TRANSACTION COMMIT TRANSACTION Help
Sep 24, 2007I had thought that if any statement failed within a BEING TRANS .. COMMIT TRANS block, then all the statements would be rolled back. But I am seeing different behavior (SQL Server 2000 8.00.2039)
For instance, run these statements to set up a test:
--DROP TABLE testTable1
--DROP TABLE testTable2
CREATE TABLE testTable1 (f1 varchar(1))
CREATE TABLE testTable2 (f1 varchar(1))
CREATE UNIQUE INDEX idx_tmptmp ON testTable1 (f1)
insert into testTable1(f1) values ('a')
So table testTable1 has a unique index on it..
Now try to run these statements:
--DELETE FROM testTable2
BEGIN TRANSACTION
insert into testTable1(f1) values ('a')
insert into testTable2(f1) values ('a')
COMMIT TRANSACTION
SELECT * FROM testTable2
..the first insert fails on the unique index.. but the second insert succeeds. Shouldn't the second insert roll back? How can I make two operations atomic?
Why Transaction Gets Promoted To Distributed Transaction
Feb 1, 2007Hi,On My local SQL server I have added a linked server to another SQLserver (remoteserver) in another Windows NT Domain.When I run this codeselect count(*) from remoteserver.mosaics.dbo.LocationThis works fine.However when I usebegin transactionselect count(*) from remoteserver.mosaics.dbo.LocationIt errors out saying thatThe operation could not be performed because the OLE DB provider'SQLOLEDB' was unable to begin a distributed transaction.New transaction cannot enlist in the specified transactioncoordinator. ]OLE DB error trace [OLE/DB Provider 'SQLOLEDB'ITransactionJoin::JoinTransaction returned 0x8004d00a].My question is even though I am just reading data from theremoteserver, why does the local transaction get promoted to adistributed transaction.Any help will be grately appreciated.TIA...Rohit
View 2 Replies View RelatedNew Transaction Cannot Enlist In The Specified Transaction Coordinator
May 18, 2007Hi
I am trying transfer data from Back Office Server to Head Office using DTS. It is failing in few stores, rest of the store it is OK
Configuration
Head office :Windows 2003 SP1 and Sql Server 2000 SP3
Failing Store:Windows 2003 SP2 and SQL SERVER 2005
Successful Store :Windows 2003 SP2 qnd SQL SERVER 2000
At Store: Setting for MSDTC
Log on Account for MSDTC Service : Network Service
Network DTC Access = True
Allow Inbound = True
Allow Outbound = True
No Authentication Required = True
TurnOffRPCSecurity = 1
port Ranges for RPC = 5000- 5100
The error Message is as follows:
(Microsoft Data Transformation Services (DTS) Package (8004d00a): Connection 'Head Office SQL Server' for Task 'DTSTask_DTSDataPumpTask_1' does not support joining distributed transactions or failed when attempting to join. Unable to enlist in the transaction.
) (Microsoft OLE DB Provider for SQL Server (8004d00a): New transaction cannot enlist in the specified transaction coordinator. )
If any one can help me, that will be great!!! Thanks in advance
Shiny
Transaction Count After EXECUTE Indicates That A COMMIT Or ROLLBACK TRANSACTION Statement Is Missing. Previous Count = 1, Current Count = 0.
Aug 6, 2006With the function below, I receive this error:Error:Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 1, current count = 0.Function:Public Shared Function DeleteMesssages(ByVal UserID As String, ByVal MessageIDs As List(Of String)) As Boolean Dim bSuccess As Boolean Dim MyConnection As SqlConnection = GetConnection() Dim cmd As New SqlCommand("", MyConnection) Dim i As Integer Dim fBeginTransCalled As Boolean = False
'messagetype 1 =internal messages Try ' ' Start transaction ' MyConnection.Open() cmd.CommandText = "BEGIN TRANSACTION" cmd.ExecuteNonQuery() fBeginTransCalled = True Dim obj As Object For i = 0 To MessageIDs.Count - 1 bSuccess = False 'delete userid-message reference cmd.CommandText = "DELETE FROM tblUsersAndMessages WHERE MessageID=@MessageID AND UserID=@UserID" cmd.Parameters.Add(New SqlParameter("@UserID", UserID)) cmd.Parameters.Add(New SqlParameter("@MessageID", MessageIDs(i).ToString)) cmd.ExecuteNonQuery() 'then delete the message itself if no other user has a reference cmd.CommandText = "SELECT COUNT(*) FROM tblUsersAndMessages WHERE MessageID=@MessageID1" cmd.Parameters.Add(New SqlParameter("@MessageID1", MessageIDs(i).ToString)) obj = cmd.ExecuteScalar If ((Not (obj) Is Nothing) _ AndAlso ((TypeOf (obj) Is Integer) _ AndAlso (CType(obj, Integer) > 0))) Then 'more references exist so do not delete message Else 'this is the only reference to the message so delete it permanently cmd.CommandText = "DELETE FROM tblMessages WHERE MessageID=@MessageID2" cmd.Parameters.Add(New SqlParameter("@MessageID2", MessageIDs(i).ToString)) cmd.ExecuteNonQuery() End If Next i
' ' End transaction ' cmd.CommandText = "COMMIT TRANSACTION" cmd.ExecuteNonQuery() bSuccess = True fBeginTransCalled = False Catch ex As Exception 'LOG ERROR GlobalFunctions.ReportError("MessageDAL:DeleteMessages", ex.Message) Finally If fBeginTransCalled Then Try cmd = New SqlCommand("ROLLBACK TRANSACTION", MyConnection) cmd.ExecuteNonQuery() Catch e As System.Exception End Try End If MyConnection.Close() End Try Return bSuccess End Function
Transaction Scope - The Operation Could Not Be Performed Because OLE DB Provider SQLNCLI For Linked Server XXX_LINKED_SERVER Was Unable To Begin A Distributed Transaction. OLE DB Provider SQLNCLI&a
May 15, 2008Hello, I've a problem with a software developed in C# with the framework 2.0. This is the error I receive : The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "XXX_LINKED_SERVER" was unable to begin a distributed transaction. OLE DB provider "SQLNCLI" for linked server "XXX_LINKED_SERVER" returned message "No transaction is active.". If I try directly to restart the process, it works fine. Is there someone who can help me ? This is the process 1. In C# --> Call of a Query : select from the linked server (db in sql 2005) and insert into a table SQL 2005 2. In the C# --> using (TransactionScope scope = new TransactionScope()) and insert in a table in SQL 2005 which is link server Thank in advance.
View 1 Replies View RelatedThe Microsoft Distributed Transaction Coordinator (MS DTC) Has Cancelled The Distributed Transaction.
Feb 29, 2008We have a test db, a staging db and a live db. I have a stored procedure that runs fine on test and staging, but throws the following error on live.
The Microsoft Distributed Transaction Coordinator (MS DTC) has cancelled the distributed transaction.
The stored procedure uses linked servers and a transaction.
We're using the following transaction code in the stored procedure
BEGIN
BEGIN TRANSACTION
BEGIN TRY
---
procedure stuff here
---
COMMIT TRANSACTION
END TRY
BEGIN CATCH
DECLARE @ErrorSeverity INT, @ErrorNumber INT, @ErrorMessage NVARCHAR(4000), @ErrorState INT
SET @ErrorSeverity = ERROR_SEVERITY()
SET @ErrorNumber = ERROR_NUMBER()
SET @ErrorMessage = ERROR_MESSAGE()
SET @ErrorState = ERROR_STATE()
IF @ErrorState = 0
SET @ErrorState = 1
RAISERROR ('ERROR OCCURED:%d', @ErrorSeverity, @ErrorState, @ErrorNumber)
IF XACT_STATE() < 0
ROLLBACK TRANSACTION
END CATCH
END
I found the following link which seems to be the problem we're experiencinghttp://support.microsoft.com/kb/937517
The link includes a workaround which is the following:
"To prevent the SQLNCLI provider from sending an attention signal to the server, use the SQLNCLI provider to consume fully any rowsets that the OLE DB consumer creates. "
How do I use the SQLNCLI provider to fully consume any rowsets?
Begin And End Transaction And Transaction Log
Dec 12, 2007Hello everyone,This is more of an architectural question about SQL Server. Cansomeone please explain why when I perform a query such as the onebelow that updates a table using begin and end transaction I am unableto programmatically truncate the transaction log. The only way I havefound to truncate the transaction log is to stop and start the SQLServer Service. Does this transaction use the tempdb? Is that why Iam unable to truncate the transaction log? Is there a better way todo this?Begin trans T1Update sometableSet random_row = 'blah'End trans T1Thanks!
View 5 Replies View RelatedGet The Current Transaction ID During The Transaction
Jan 15, 2008Hi Everyone-
i wonder how can i get the current transaction ID during the running of transaction
thanx
Maylo