I keep getting this error message even though I have droped and recreated
the replication several times. Has anybody had the same problem?
error message.
"Another snapshot agent for the publication is running"
Thanks for your time.
I want to list out the pending transaction for transaction replication by publication.
Help needed.
What is the main difference between snapshot and transactional and merge replication?
View 5 Replies View RelatedDear all,
I set up a transaction replication (from server A to server B) for tables and stored procedures. When I update the data at server A, the data at server B will be updated by replication. However, the stored procedure can't update at server B no matter what I changed at server A's stored procedure. How can I update the stored procedure using transaction replication?
The other question is the table schema. As I know, the transaction replication will be created a snapshot to project all needed tables and stored procedures at the first time. If I created a new table, stored procedure or changed the table schema (e.g. add/delete a new column), the transaction replication didn't update the new objects to the server B. What can I do to update the transaction replication except creating a new subscription?
Thanks.
epjames
Good Morning to all,
I am new to SQL Server.Here is my question. I have set up transactional replication with immediately updating subscriber between to servers A & B. A is publisher/Distributor and B is subscriber. In the event A fails the applications will be directed towards B. My problem is suppose A has faliled and my data is now written to B. How can i syncronise data in A and b when A is again online and what should i do ?
thanks in advance.
Minesh.
Hi all,
I am using SQL 2k on two seperate servers on win 2k advance servers without any service packs. My problem is i am using transactional replication between two servers (SML1 and SML2), SML1 is publisher/Distributor and SML2 is subscriber. My db name on both the server is same. when i am inserting data in db on SML1 it replicates immediately on SML2 but vice versa in not happening. Any help in setting up two way replication is highly appreciated. (There is no timestamp column on table which is used as article and there is PK).
thanks in advance.
Minesh.
My Transaction Replication fail with this error message pls help.
This is the error message The process could not create file 'SQLMS1d$MSSQL7ReplDatauncSQLMS1_AFT_National_EMN _National - Transaction - Changes at Both Sides - EMN to Local Only20000607090006Benefit.sch'.
I it possible to setup transaction replication between two sql servers if both Sqlerveragents runs under different accounts and the servers are in different domains
Thanks in advance
Langel
I am attempting to set up transactional replication between a production server (SQL1) and a “reports” server (SQL2). The production server is the publisher, the “reports” server is the distributor and the first subscriber, other subscribers will be added later. There are multiple databases on the production server; selected tables from each will be replicated to corresponding databases on the other servers. Both are SQL7, no SP (yet).
I have set up the replication on two databases so far. The initial snapshot replication runs fine; the tables and data are duplicated on the reports server.
For one DB the transaction replication fail the other still reports “No replicated transactions are available”, which is probably true.
The failing log reader agent history reports: “The process could not execute ‘sp_replcmds’ on SQL1“ (five time, 10 minutes apart). The session details shows 2 items, “Initializing” and the same error message. The error details show it as an ODBC error timeout.
After the fifth time the log agent history reports “The process could not execute ‘sp_Msadd_repl_commands27hp’ on SQL2 ” The session details show 3 items , “Initializing”, “No replicated transactions are available” and the same error message. The error details show the following (Category, Source, Number, Message): Agent, blank, 2000, “IDistPut Interface has been shut down.”; Agent, SQL1-JCL1, 20007,” No replicated transactions are available.” ( 26 times); Data Source, SQL2, 1007 “Cannot insert duplicate key row in object 'MSrepl_transactions' with unique index 'ucMSrepl_transactions'.Cannot insert duplicate key row in object 'MSrepl_transactions' with unique index 'ucMSrepl_transactions'.”
I can restart the agent, but after two hours the same thing appears. These were set up with EM using the wizzards
Any suggestions would be greatly appreciated.
I had established a transaction log replication ,it's not immediate-updated.
on next 2 days,it's normal.but now,it's not available ,and haven't any warning,error,informatin.
I have very trouble about the 'log reader' is running but i change the data in articles it's no effect.
please tell how i do?
Hi,
Every one
Can I add coulmn in my existing table which i am using for replication. This article is i am using for transaction replication. I added column to both articles , publisher & subscriber, But now it is giving me error that, Insert error.
I checked in Create & Manage publications property on E.M , that cloumn is not checked & it is not allowing me to do from E.M , Does any one know
which store proc I require to execute from QA.
Appreciate Your Help
Thanks
Nirmal.
I am trying to setup real time transaction replication between two databases on two different sql server 7.0.The ideas is to replicate all the objects from the first database to the second database including table, stored procedures and views. Both SQL servers’ runs under different service NT account.
The sql server that I want to replicate runs an application that create additional tables when the application is running.
How do I schedule a transaction replication so that all the objects plus those additional tables and stored procedures that the application creates at run time are also going to get replicated in real time?
Thanks in advance.
JACK
Hi All,
I have been asked to take over the maintenance on dB servers that I have not originally 'set up'. The request came as a result of the database log files growing at such a rapid pace its taking up hard drive space. I ran sp_dboption and noticed that the log files are NOT set up to truncate on checkpoint. As in SQL 2000 I wanted to determine if the dB was set up in 'simple' or 'full' recovery mode. It appears they are set up in 'full' recovery mode (which we can modify, since this is not a transactional dB and we rarely if ever have to restore from the transaction log). Hence my question,
Is there anything I need to worry about (regarding replication)if I change the dboption to truncate on checkpoint and set dB in simple recovery mode?
And after I backup the transaction log and try to shrink it will that have any adverse affects? I feel like this is all I need to do but replication is new ground for me, any information regarding it would be greatly appreciated. Also, any advice on how to maintain the transaction logs would be helpful.
Christine
How terrible my life! save me!
Do you know the function of system store procedures for replication in publish database and distrubtion database? please tell me.
I'd established 'transaction log' replication, it's like something is full or can't active,i don't know what process is unvalid.
How i do!
Hi,
Every one
I have added new column in my Publication - Article Table ,
Same column I have added in my Subscriber Table ,
I am doing Transaction replication , but now its giving me error
Insert Error - Column Name or Supplied Value doesn't Match,
If any one has any idea please suggest me
Thanks
Nirmal
Hi all,
I am using SQL 2k on two seperate servers on win 2k advance servers without any service packs. My problem is i am using transactional replication between two servers (SML1 and SML2), SML1 is publisher/Distributor and SML2 is subscriber. My db name on both the server is same. when i am inserting data in db on SML1 it replicates immediately on SML2 but vice versa in not happening. Any help in setting up two way replication is highly appreciated. (There is no timestamp column on table which is used as article and there is PK).
thanks in advance.
Minesh.
Besides loopback detection, is there anything else that is needed to prevent the replication command from sending back to the source. Cos i am having problem with the subscriber B sending back the replication to A in the form of B as the publisher and A as the subscriber.
:confused:
Two Servers,1st 2nddatabase a -------> after replication a'b' <------- after replication bon 1st server a is replicated to 2ndon 2nd server b is replicated to 1stI tried with merge replication it is working fine.But if i tried to usetransactional replication it give some error like "accessviolation".Using tansactional replication is it possible.plz help me toslove this problem.Regards,Senthil prabu R
View 1 Replies View RelatedHi all, using transactional replication in SQL 05, I have a schema that is different at the subscriber and wanted to know the best approach for transforming the published data. For example, the subscriber is more normalized than the data being published causing 1 published record broken out into to many tables at the subscriber. Also need to applying scalar funtions to a few published columns before committing at subscriber.
I've read DTS, although backwards compatible, is being deprecated in a future release. I suppose I can use either SSIS or custom procedures. I didn't see any tie-in to SSIS in the system procedures to setup replication (only DTS). Any advice on which would work in this type of scenario?
Much appreciated, Pat
Hi!
View 1 Replies View RelatedThanks. I worry about my setup information may be have some issue.I can't express it in word.so please tell me you e-mail address,i will send a document to you.
Some information may be useful,i had did same thing with another database,it's normal in 1 day.
I need help to add new fields in Transaction replication & also want to know how it will be replicated to Subscriber.
View 1 Replies View Related:mad:
I have one Publisher! (SQL 2005)
Two Subscribers. (SQL 2005)
Each subscriber requires different row filter from the published tables.
So, i need to create Two publications for each subscriber for the same db.
When i setup first publication, and apply filters to published tables.
All goes fine.
As soon i create an other publication with same published tables but DIFFERENT row filter; the log reader agent fails!
The process could not execute 'sp_replcmds' on 'DB1'. (Source: MSSQL_REPL, Error number: MSSQL_REPL20011)
Get help: http://help/MSSQL_REPL20011
Execution of filter stored procedure 2076702271 failed. See the SQL Server errorlog for more information. (Source: MSSQLServer, Error number: 18764)
Get help: http://help/18764
The Log Reader Agent failed to construct a replicated command from log sequence number (LSN) {0008443a:000003b5:003e}. Back up the publication database and contact Customer Support Services. (Source: MSSQLServer, Error number: 18805)
:confused:
I have tried to re-initialze the subscriptions and re-run snapshots but no luck.
As i remove the row filter from the second publication; log reader starts working fine.
Previously i was using Merge replication and all was going BUT, on very large DML on publisher, we use to receive deadlock errors on application.
I decided to use Tran repl instead because log reader reads the changes from tran-log instead of locking the published tables; NOW I AM STUCK!
Ideas please!!!!
I wanted to schedule the transaction replication. How do I do it? Currently I have set up a transaction replication which runs continuously and synchronizes the changes with immediate effect.
I need to configure a replication which will gather logs from the publication once in a day.
We are implementing 2005 transaction replication on source database to target staging subscring database but we want to keep all transaction changes from source within staging subscribing tables.
If source column gets updated we want to keep old record and new updated record in staging subscriber. Transaction replication synchronizes but does not keep history on subscriber. Do we update stored proc's
anyone have examples of code or ideas??
i have transactional replication setup. recently i found that some of the new records in the publisher are not replicated to subscriber, but the replication is going on as normal with most of the record replicated.
the only this happen is user stop and restart the synchronization.
why this happen, how to find all the records which are not replicated and how to replicate to subscriber now.
Hi All
I have set up transactional replication between our production and reporting server boxes and getting the following error messages too oftenly.
Anybody having any idea to reslove the issue would be of great help.
Error messages:
The process could not execute 'sp_replcmds' on. (Source: MSSQL_REPL, Error number: MSSQL_REPL20011) Get help: http://help/MSSQL_REPL20011
A system assertion check has failed. Check the SQL Server error log for details (Source: MSSQLServer, Error number: 3624)
Get help: http://help/3624
The process could not execute 'sp_replcmds' on 'STRATASQL4'. (Source: MSSQL_REPL, Error number: MSSQL_REPL22037)
Get help: http://help/MSSQL_REPL22037
Early Thanks,
Salman Shehbaz.
The process could not execute 'sp_repldone/sp_replcounters' on 'sqldb2008'. (Source: MSSQL_REPL, Error number: MSSQL_REPL20011).The specified LSN {00000000:00000000:0000} for repldone log scan occurs before the current start of replication in the log {001317bf:0000f736:0008}. (Source:Â
MSSQLServer, Error number: 18768).The process could not set the last distributed transaction. (Source: MSSQL_REPL, The process could not execute 'sp_repldone/sp_replcounters' on 'sqldb2008'. (Source: MSSQL_REPL, Error number: MSSQL_REPL22037)
I have a publication on Sql Server 2012 that uses transactional replication to 7 subscribers (these are a mix of Sql Server 2008R2 and Sql Server 2012). Last night I scheduled the Snapshot job to run to "re-publish" the database to the subscribers. I had a few new table to push down. Unfortunately the snapshot job became the deadlock victim. Now updates to the publisher are not being sent to the subscribers.
Short of rerunning the snapshot job, is there a way to repair the replication so the updates to the publisher are pushed to the subscribers? The "re-publish" can only be run overnight when there is very little impact to users.
Bill Soranno
MCP, MCTS, MCITP DBA
Database Administrator
Winona State University
Maxwell 143
"Quality, like Success, is a Journey, not a Destination" - William Soranno '92
Is there any problem with implementating some kind of replication andbacking up transaction logs at the same time? SQL Server 2000 StandardEditionThe server is configured to back up log files regularly, with thepresenceof a(New) Disaster recovery server and with an inability forstandby(Standard Edition)I am planning to implement some kind ofreplication hopefully still backing up the transaction logs to enablea point in time recovery.Thanks in advance for your great ideasVincento
View 1 Replies View RelatedI'm trying to create a transaction replication from SQL Server 2000 to 2005. Basic replication between the servers works just fine. However, what I want to accomplish is to be able to skip some of the transactions. Example - from time to time we want to purge some of the historical data from the main database (the publisher). We don't want the same purging to occur on the destination database, which will be used for reporting purposes and needs to include all the historical information. I wanted to simply stop the replication log reader, purge the records, backup the transaction log with truncation and then restart the reader. The only problem - the truncation on the replicated database keeps the transactions of the purging until they are replicated, so the transaction log backup doesn't help. Any ideas would be greatly appreciated!
View 5 Replies View Related
How do I get a new table added to a transaction publication with R/O subscribers? Is it not possible to add new tables without completely drop and recreating the publication?
Hello!
View 5 Replies View Related