Transaction Across 2 Databases?

Jul 23, 2005

Is it possible to wrap a transaction across 2 database? For example:

BEGIN TRANSACTION

.... alter something in Database_1

.... alter something in Database_2

COMMIT TRANSACTION
or if there is any error:
ROLLBACK TRANSACTION

View 3 Replies


ADVERTISEMENT

How To Maintain Transaction Between Two Databases?

Apr 9, 2007

Hi All,
Pandon me for asking such question, I am still a beginner to ASP.NET.
I have a project that require me to do single operation that is suppose to update two databases, wonder how do I maintain transaction between these two databases? Please advise, thank you!

View 3 Replies View Related

Separate Databases For High/low Transaction Volumes?

Jun 23, 2006

I have an existing database with approx 500,000 rows and accessed by afew hundred users per day creating approx 1,000 new records per dayplus typical reporting - relatively low volume stuff for SQL Server.I'm about to add a process that will be importing data daily fromlegacy databases and summarizing it for reporting purposes, integratingit with the existing database. This volume of data will be considerablyhigher, perhaps 100,000+ rows per day, which will be deleted once ithas been summarized and the results written to some intermediatetables.Is there any concern about mixing different levels of volume within onedatabase? As I'll be creating lots of rows daily and then deleting themI was wondering about fragmentation, transaction logging etc. andwhether having this processing in a separate database from the mainapplication would be 'better'.

View 3 Replies View Related

Data/Transaction Log Files For Two Databases Have Same File Name

Jul 20, 2005

We have two db's. One live and one test.When I right click on the live one in SQL Enterprise Manager andselect properties -> Data Files ->File Name is LIVE.MDFLocation is F:DataLIVE.MDFWhen I right click on the test one in SQL Enterprise Manager andselect properties -> Data Files ->File Name is LIVE.MDFLocation is F:DataTEST.MDFSame thing applies to Transaction log files too.My concern is File Name is same in both the above cases even thoughthe location is different. What are the consequences of this.Thanks for your helpGVV

View 1 Replies View Related

DB Engine :: Transaction Log Backup On AlwaysOn Databases

Jun 26, 2015

I am using alwayson on my SQL 2012 databases. I am using ola hallengren scripts for backing up databases. Full & diff db backups work fine, but the log is not getting backed up. The tran log backup job doesn't error out too. Trying to figure out what I may be missing?

View 10 Replies View Related

Transaction Support Across Tasks Accessing Two Different Databases

Apr 7, 2008

I am trying to determine if it is possible to add transaction support for a SSIS package. Here are the basic tasks:

Read New/Updated records from SQL Server
Update changed records in Access
Insert new records into Access
Update new records in SQL Server with Access key assigned on insert in previous step
Reset dirty_flag

I would like to wrap a transaction around this. If the package fails in the task that updates sql server with the Access key, the next time it runs, it duplicates the new records in Access because it did not finish the process. Is it possible to have a transaction wrap this entire process so I can undo the inserts to Access if I fail any subsequent tasks?

Thanks,

Steve

View 1 Replies View Related

SQL Server Admin 2014 :: Separate Transaction Log Files For Multiple Databases?

May 15, 2015

We have multiple databases on a single instance in an OLTP environment. I have my data files on a separate SAN LUN from my transaction log files (and a few NDFs split out onto additional LUNs). I was wondering if there is a performance benefit to putting each LDF file on its own LUN? Or at least my few busiest LDFs?

We are currently on 2012, but I'm having to put together specs for a 2014 installation and need to answer this question without having an environment in which I can benchmark different setups. I just want to hear whether or not others have done this (why or why not?).

View 3 Replies View Related

Error 8525: Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.

May 31, 2008

Hi All

I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.

If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.

I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.

set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN


It's got me stumped, so any ideas gratefully received.Thx

View 1 Replies View Related

SSIS, Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.

Feb 22, 2007

I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.

for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.

I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.

if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.

and

Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.

Please help me it's very urgent.

View 3 Replies View Related

Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.

Feb 6, 2007

I am getting this error  :Distributed transaction completed. Either enlist this session in a new
transaction or the NULL transaction. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: Distributed transaction completed. Either
enlist this session in a new transaction or the NULL transaction.have anybody idea?!

View 1 Replies View Related

Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.

Dec 22, 2006

i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.

Message is like this:

Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.

View 8 Replies View Related

Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction. (HELP)

Jan 8, 2008

Hi,

i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".

my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.



Thanks in advance.


View 2 Replies View Related

Linking Tables From Different Databases Or Querying From Multiple Databases

Dec 10, 2007

Dear Readers,Is it possible, like in Access, to link to tables in other SQL databases that are on the same server? I have a query that I originally had in Access that queered from multiply databases. It did this by having those other tables in the other databases linked to the database that had the query. 
 

View 3 Replies View Related

SQL Server Admin 2014 :: Restore Lost Transaction From Transaction Log File

Jun 10, 2015

I have Full database backup upto previous day and transaction logfile of Today transaction. my database has crashed. I have restored previous day's Full backup. I have faced difficulty to restore today's transaction from today's transaction log. What are the steps to restore full database back and one day's transaction log file. Note: there is no differential database backup and transaction backup.

View 8 Replies View Related

I Need Away To Show The Pending Transaction From Transaction Replication In A User Friendly Format.

Jul 11, 2007



I want to list out the pending transaction for transaction replication by publication.



Help needed.

View 1 Replies View Related

TRANSACTIONS In SSIS (error: The ROLLBACK TRANSACTION Request Has No Corresponding BEGIN TRANSACTION.

Nov 14, 2006

I'm receiving the below error when trying to implement Execute SQL Task.

"The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION." This error also happens on COMMIT as well and there is a preceding Execute SQL Task with BEGIN TRANSACTION tranname WITH MARK 'tran'

I know I can change the transaction option property from "supported" to "required" however I want to mark the transaction. I was copying the way Import/Export Wizard does it however I'm unable to figure out why it works and why mine doesn't work.

Anyone know of the reason?

View 1 Replies View Related

Analysis :: Find Amount Distribution Across Different Transaction Types Under Spend Transaction

Jul 27, 2015

I created a Calculated measure in cube something like this : ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount]). To get only spend transactions. Now, I want to slice this measure with same hierarchy to find the amount distribution across different transaction types under spend transaction. But this query behaving like the measure doesn't have relation with measure.

you can think this as below query:
WITH
MEMBER SPEND AS ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount])
SELECT NON EMPTY {SPEND} ON 0
,NON EMPTY ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent]) ON 1
FROM [CUBE]

View 6 Replies View Related

How Do I Make Use Of Begin Transaction And Commit Transaction In SSIS.

Jun 1, 2007

Hi



How do I make use of begin transaction and commit transaction in SSIS.

As am not able to commit changes due to certain update commands I want to explicitly write begin and commit statements. but when i make use of begin and commit in OLEDB commnad stage it throws an error as follows:

Hresult:0x80004005

descriptionyntax error or access violation.



its definately not an syntax error as i executed it in sql server. also when i use it in execute sql task out side the dataflow container it doesnt throw any error but still this task doesnt serve my purpose of saving/ commiting update chanages in the database.



Thanks,

Prashant

View 3 Replies View Related

Sql2005:Cannot Use SAVE TRANSACTION Within A Distributed Transaction

Oct 10, 2005

Error returned when trying to commit the transaction to a database that is a replication distributor. (sql2005 ctp16)

View 10 Replies View Related

Problem With SSIS Transaction...Transaction Scope

Jun 1, 2006



Hi,

I am having some problem with SSIS transaction. Eventhought I tried to imitate the concept that Jamie presented at http://www.sqlservercentral.com/columnists/jthomson/transactionsinsqlserver2005integrationservices.asp

. My workflow is as followed

*********************************
For Each ADO.Record in Oracle (transaction=not supported)

If (Certain_Field_Value = 'A')


Lookup Data in SQL DB with values from Oracle (transaction=not supported)

DO Sequence A (Start a Transaction , transaction=required)


INSERT/UPDATE some records in SQLDB(transaction=supported)
Finish Sequence A ( transaction should stop here)
UPDATE Oracle DB ( Execute SQLTask, transaction=not supported)
If (Certain_Field_Value = 'B')


Lookup Data in SQL DB with values from Oracle (transaction=not supported)

DO Sequence B (Start a Transaction , transaction = required)


INSERT/UPDATE some records in SQLDB (transaction=supported)
Finish Sequence A ( transaction should stop here)
UPDATE Oracle DB ( Execute SQLTask, transaction=not supported)
If (Certain_Field_Value = 'C')

------------
------------
End ForEach Loop
*************************************
My requirements are that I want separate transaction for each Sequence A, B, C, etc... If Sequence A transaction fails, the other should still be continuing with another transaction.
But I am getting an error regarding the OLEDB Error in next Task (e.g in Certain_Field_Value = 'B') "Lookup Data in SQL DB with values from Oracle ", the error message is ".......Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction. ".
What is it that I am doing wrong?
Regards
KyawAM

View 12 Replies View Related

Service Broker Not Working For Restored Databases (SQL 2000 Databases Restored On 2005)

Jan 24, 2006

I just restored my SQL server 2000 database on the SQL server 2005. after this i ran the Service broker sample ("Hello World") on this database by changing the AdventureWorks name to the new database name. The "setup.sql" runs fine. When i run the "SendMessage.sql" i was not getting any rows in the output (The message was not getting inserted into the queue). I checked the Service broker is enabled on this databased using the query "select is_broker_enabled from sys.databases where name = 'newdbname' " It was 1. I even tried the ALTER DATABASE SET ENABLE_BROKER. but it didnt work.

When i tried the sample on a newly created database it worked fine.

Is there any solution to make the restored database to work for service broker.

Thanks

Prashanth

View 3 Replies View Related

New Transaction Cannot Enlist In The Specified Transaction Coordinator

Nov 28, 2004

I'm getting this error:

The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].

http://support.microsoft.com/kb/839279 this didn't help

any suggestions?

View 3 Replies View Related

BEGIN TRANSACTION And COMMIT TRANSACTION

Oct 11, 2000

I am executing a stored procedure something like this

Create Procedure TEST
@test1
@test2
AS
BeGIN TRANSACTION ONE
SELECT...
UPDATE..
....
....

....
TRUNCATE
etc and lot of Select,update and delete statements like this
.....
COMMIT TRANSACTION ONE


The Block of code which I have b/w BEGIN TRANSACTION AND COMMIT TRANSACTION ..Will it be rolled back
if it encounters any errors in the SELECT,UPPDATE,DELETE ..statements which I have with the transaction one.
IF not How do I roll back if it encounters any erros b/w the BEGIN TRANSACTION and END TRANSACTION.

Thanks
micky

View 1 Replies View Related

New Transaction Cannot Enlist In Transaction Coordinator (was Please Help...)

Apr 18, 2005

Hi all,

In my ASP application, I've been using this code:

----------------------------------------------
dim conn, connectionstring

connectionstring= "Provider=SQLOLEDB.1; Data Source = blahblah; Initial Catalog = abc; User Id = osss; Password=xxx"

set conn = server.CreateObject("adodb.connection")
conn.open connectionstring

----------------------------------------------

It's just basically to set up the connection to the SQL server, it works on my other pages, but on a few pages, the last line (conn.open connectionstring) triggers this error:

"Microsoft OLE DB Provider for SQL Server error '8004d00a'

New transaction cannot enlist in the specified transaction coordinator. "

I've never encountered this error before and I couldn't think of any solution... please help!!!

Thanks so much,
Annie

View 2 Replies View Related

BEGIN TRANSACTION COMMIT TRANSACTION Help

Sep 24, 2007

I had thought that if any statement failed within a BEING TRANS .. COMMIT TRANS block, then all the statements would be rolled back. But I am seeing different behavior (SQL Server 2000 8.00.2039)

For instance, run these statements to set up a test:
--DROP TABLE testTable1
--DROP TABLE testTable2
CREATE TABLE testTable1 (f1 varchar(1))
CREATE TABLE testTable2 (f1 varchar(1))
CREATE UNIQUE INDEX idx_tmptmp ON testTable1 (f1)
insert into testTable1(f1) values ('a')

So table testTable1 has a unique index on it..

Now try to run these statements:

--DELETE FROM testTable2
BEGIN TRANSACTION
insert into testTable1(f1) values ('a')
insert into testTable2(f1) values ('a')
COMMIT TRANSACTION

SELECT * FROM testTable2


..the first insert fails on the unique index.. but the second insert succeeds. Shouldn't the second insert roll back? How can I make two operations atomic?

View 8 Replies View Related

Why Transaction Gets Promoted To Distributed Transaction

Feb 1, 2007

Hi,On My local SQL server I have added a linked server to another SQLserver (remoteserver) in another Windows NT Domain.When I run this codeselect count(*) from remoteserver.mosaics.dbo.LocationThis works fine.However when I usebegin transactionselect count(*) from remoteserver.mosaics.dbo.LocationIt errors out saying thatThe operation could not be performed because the OLE DB provider'SQLOLEDB' was unable to begin a distributed transaction.New transaction cannot enlist in the specified transactioncoordinator. ]OLE DB error trace [OLE/DB Provider 'SQLOLEDB'ITransactionJoin::JoinTransaction returned 0x8004d00a].My question is even though I am just reading data from theremoteserver, why does the local transaction get promoted to adistributed transaction.Any help will be grately appreciated.TIA...Rohit

View 2 Replies View Related

New Transaction Cannot Enlist In The Specified Transaction Coordinator

May 18, 2007

Hi



I am trying transfer data from Back Office Server to Head Office using DTS. It is failing in few stores, rest of the store it is OK

Configuration

Head office :Windows 2003 SP1 and Sql Server 2000 SP3

Failing Store:Windows 2003 SP2 and SQL SERVER 2005

Successful Store :Windows 2003 SP2 qnd SQL SERVER 2000





At Store: Setting for MSDTC

Log on Account for MSDTC Service : Network Service

Network DTC Access = True

Allow Inbound = True

Allow Outbound = True

No Authentication Required = True

TurnOffRPCSecurity = 1

port Ranges for RPC = 5000- 5100



The error Message is as follows:

(Microsoft Data Transformation Services (DTS) Package (8004d00a): Connection 'Head Office SQL Server' for Task 'DTSTask_DTSDataPumpTask_1' does not support joining distributed transactions or failed when attempting to join. Unable to enlist in the transaction.
) (Microsoft OLE DB Provider for SQL Server (8004d00a): New transaction cannot enlist in the specified transaction coordinator. )



If any one can help me, that will be great!!! Thanks in advance



Shiny

View 3 Replies View Related

Copying Databases Between Databases

Feb 8, 2000

hi from France !!!

i would like how to duplicate a database to another server with all datas, constraints, keys, indexes...
should i use sp_attach_db, dts, backup/restore, sql scripts... ???

thanks to all, nico

View 1 Replies View Related

Transaction Count After EXECUTE Indicates That A COMMIT Or ROLLBACK TRANSACTION Statement Is Missing. Previous Count = 1, Current Count = 0.

Aug 6, 2006

With the function below, I receive this error:Error:Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = 1, current count = 0.Function:Public Shared Function DeleteMesssages(ByVal UserID As String, ByVal MessageIDs As List(Of String)) As Boolean        Dim bSuccess As Boolean        Dim MyConnection As SqlConnection = GetConnection()        Dim cmd As New SqlCommand("", MyConnection)        Dim i As Integer        Dim fBeginTransCalled As Boolean = False
        'messagetype 1 =internal messages        Try            '            ' Start transaction            '            MyConnection.Open()            cmd.CommandText = "BEGIN TRANSACTION"            cmd.ExecuteNonQuery()            fBeginTransCalled = True            Dim obj As Object            For i = 0 To MessageIDs.Count - 1                bSuccess = False                'delete userid-message reference                cmd.CommandText = "DELETE FROM tblUsersAndMessages WHERE MessageID=@MessageID AND UserID=@UserID"                cmd.Parameters.Add(New SqlParameter("@UserID", UserID))                cmd.Parameters.Add(New SqlParameter("@MessageID", MessageIDs(i).ToString))                cmd.ExecuteNonQuery()                'then delete the message itself if no other user has a reference                cmd.CommandText = "SELECT COUNT(*) FROM tblUsersAndMessages WHERE MessageID=@MessageID1"                cmd.Parameters.Add(New SqlParameter("@MessageID1", MessageIDs(i).ToString))                obj = cmd.ExecuteScalar                If ((Not (obj) Is Nothing) _                AndAlso ((TypeOf (obj) Is Integer) _                AndAlso (CType(obj, Integer) > 0))) Then                    'more references exist so do not delete message                Else                    'this is the only reference to the message so delete it permanently                    cmd.CommandText = "DELETE FROM tblMessages WHERE MessageID=@MessageID2"                    cmd.Parameters.Add(New SqlParameter("@MessageID2", MessageIDs(i).ToString))                    cmd.ExecuteNonQuery()                End If            Next i
            '            ' End transaction            '            cmd.CommandText = "COMMIT TRANSACTION"            cmd.ExecuteNonQuery()            bSuccess = True            fBeginTransCalled = False        Catch ex As Exception            'LOG ERROR            GlobalFunctions.ReportError("MessageDAL:DeleteMessages", ex.Message)        Finally            If fBeginTransCalled Then                Try                    cmd = New SqlCommand("ROLLBACK TRANSACTION", MyConnection)                    cmd.ExecuteNonQuery()                Catch e As System.Exception                End Try            End If            MyConnection.Close()        End Try        Return bSuccess    End Function

View 5 Replies View Related

Transaction Scope - The Operation Could Not Be Performed Because OLE DB Provider SQLNCLI For Linked Server XXX_LINKED_SERVER Was Unable To Begin A Distributed Transaction. OLE DB Provider SQLNCLI&a

May 15, 2008

Hello, I've a problem with a software developed in C# with the framework 2.0. This is the error I receive : The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "XXX_LINKED_SERVER" was unable to begin a distributed transaction. OLE DB provider "SQLNCLI" for linked server "XXX_LINKED_SERVER" returned message "No transaction is active.". If I try directly to restart the process, it works fine. Is there someone who can help me ? This is the process 1. In C# --> Call of a Query : select from the linked server (db in sql 2005) and insert into a table SQL 2005 2. In the C# --> using (TransactionScope scope = new TransactionScope()) and insert in a table in SQL 2005 which is link server Thank in advance.

View 1 Replies View Related

The Microsoft Distributed Transaction Coordinator (MS DTC) Has Cancelled The Distributed Transaction.

Feb 29, 2008

We have a test db, a staging db and a live db. I have a stored procedure that runs fine on test and staging, but throws the following error on live.


The Microsoft Distributed Transaction Coordinator (MS DTC) has cancelled the distributed transaction.


The stored procedure uses linked servers and a transaction.
We're using the following transaction code in the stored procedure

BEGIN

BEGIN TRANSACTION

BEGIN TRY

---
procedure stuff here
---
COMMIT TRANSACTION
END TRY



BEGIN CATCH

DECLARE @ErrorSeverity INT, @ErrorNumber INT, @ErrorMessage NVARCHAR(4000), @ErrorState INT

SET @ErrorSeverity = ERROR_SEVERITY()

SET @ErrorNumber = ERROR_NUMBER()

SET @ErrorMessage = ERROR_MESSAGE()

SET @ErrorState = ERROR_STATE()



IF @ErrorState = 0

SET @ErrorState = 1



RAISERROR ('ERROR OCCURED:%d', @ErrorSeverity, @ErrorState, @ErrorNumber)

IF XACT_STATE() < 0

ROLLBACK TRANSACTION

END CATCH



END


I found the following link which seems to be the problem we're experiencinghttp://support.microsoft.com/kb/937517

The link includes a workaround which is the following:
"To prevent the SQLNCLI provider from sending an attention signal to the server, use the SQLNCLI provider to consume fully any rowsets that the OLE DB consumer creates. "


How do I use the SQLNCLI provider to fully consume any rowsets?

View 11 Replies View Related

Begin And End Transaction And Transaction Log

Dec 12, 2007

Hello everyone,This is more of an architectural question about SQL Server. Cansomeone please explain why when I perform a query such as the onebelow that updates a table using begin and end transaction I am unableto programmatically truncate the transaction log. The only way I havefound to truncate the transaction log is to stop and start the SQLServer Service. Does this transaction use the tempdb? Is that why Iam unable to truncate the transaction log? Is there a better way todo this?Begin trans T1Update sometableSet random_row = 'blah'End trans T1Thanks!

View 5 Replies View Related

Get The Current Transaction ID During The Transaction

Jan 15, 2008

Hi Everyone-
i wonder how can i get the current transaction ID during the running of transaction

thanx
Maylo

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved