Greetings,
My database has a situation where my transaction log is growing out of control. However I have not been able to figure out where any memory leaks are occuring.
Is there a way to monitor the database in order to find out at when the tlog is growing. Or even better, what sql is being executed that is causing this unreasonable tlog growth?
Thanks a million,
Roger
I upgraded from SQL 6.5 to SQL 7 last month, and so far, everything's
been going fine.
However, I'm not using my old SQL 6.5 backup scripts, which, when the
backup was done, would dump the transaction log with TRUNCATE_ONLY, shrinking
the log size.
My SQL 7 server is set up with a Maintenance Plan which does everything,
including backup, but the log file seems to be growing and growing. I'm
up to 4.5 gigs now, for a database with a data file of 3.5 gigs.
How do I "dump transaction with TRUNCATE_ONLY" on a SQL 7 database?
Thanks,
Todd Wallace
I wonder if anyone could explain why when monitoring the transaction log size it doesn't appear to be growing! I'm using the following code to test image data types with logging.. I've got 'Truncate log on Checkpoint' switched off and 'Select into Bulk copy' also switched off.
Running the following code I would expect to see the transaction log grow and grow and grow... Monitoring it using perfmon indicates that it isn't in fact logging...
DECLARE @ptrval varbinary(16)
SELECT @ptrval = TEXTPTR(pr_info)
FROM pub_info pr INNER JOIN publishers p
ON p.pub_id = pr.pub_id
AND p.pub_name = 'New Moon Books'
declare @Loop int
select @Loop = 0
While @Loop <= 10000
BEGIN
WRITETEXT pub_info.pr_info @ptrval
with log
'New Moon Books (NMB) '
select @Loop = @Loop + 1
END
Hi,
I'm getting this SQL server log...
The log file for database 'P5_Nextel' is full. Back up the transaction log for the database to free up some log space
What i'm doing is, i just resizing the space allocated, but the problem is my disk is now out of space. How can i prevent this kind of problem without adding a new disk? Is there any other way?
Please advise.
Thanks!
I am having problems with the transaction log growing. I set up a maintenance plan to backup every 15 minutes. The recovery model is set to full. It is set to auto grow by 10 percent with unrestricted file growth. The space allocated is 2mb. Should this be set higher? It seems whenever I unchecked the auto shrink, the log is growing larger. The command I use to check is:
SELECT *
FROM sysfiles
WHERE name LIKE '%LOG%'
GO
This is the log size and the log space used.
1.492187538.02356
This has grown 4 percent since yesterday. Are there any good practices to maintain these log files?Any help would be appreciated.
msr976
Hi,We have created a SQL server 2000 database. We observe that thetransaction log keeps growing over time. We are now about to run out ofspace. We have been periodically shrinking the database. Neverthelessthe size has increased. I would imagine that a transaction log can beeliminated if we stop the database. Can that be done? Is there a way tocompletely wipe off the transaction log?Thanks,Yash
View 4 Replies View RelatedI have to admit, I'm usually using the MySql database, but in this particular case I have to use MSSQL 2000.
Over to my problem.
I'm building a web-based system (who isn't these days) in which the user types arbitrary information that is published when the user pushes the save button. Nothing new about that.
Here comes the tricky part, when the user wants to edit an existing item I copy all information in the database and sets the id of the 'edit-copy' to the negative value ( id 45 becomes id -45 for the edit-copy). This is also done on all items in other tables that is connected to the main item.
This way I get a copy that the user may edit without messing up the published information. When the user is done I either delete all the negative items (cancel) or delete the positive items and update the negative to become positive (save).
So far so good, allmost... my problem is that the transaction log grows tremendously.
Is there any other way to accomplish a safe edit that doesn't affect the transaction log as much as my current solution?
Could I be doing something wrong when updateing or deleteing my items?
The transaction log of a database grows until it runs out of disk space. If disk space is full, all databases on instance may get problems. Because of this i have set a limitation on how much it may grow, up to 40 GB. It grows in steps of 100 MB. It reaches its limit a couple of times a week, causing the application to hang.
The database file itself is about 2,3 GB large.
The SQL version is 10.50.4276, SQL2008R2 SP2.
The recovery model is FULL.
I have a backupjob that runs a FULL Backup at midnight.And a backupjob that runs a LOG backup every 30 minutes.Both finishes with success. However, the transaction log is never truncated, the unused space is never released.
I have checked for "long running jobs", it sometimes sys "backup_log", sometimes "active_transaction".
Could a workaround be to set the recovery mode to simple, and create a full-backup job that runs every 30 minutes for this database? It is a critical database....
Hi there,
We have a Principle, Mirror and Witness set-up and all is working fine, however, the transaction logs for a few large databases just keep growing over a the course of the month until the disk is full. As I understand it, and having tried you can't dump the transaction logs while mirroring is configured, is there any way at all to commit and truncate the logs while mirroring is running or do I have to manually remove the mirroring each month, dump the transaction logs and then re-enable it again after doing the backup/restore?
The databases in question are about 6GB in data size and the transaction logs can grow to be about 60GB in a month.
Would a normal SQL Server 2005 backup truncate the logs if I configured this? At the moment we use Litespeed for SQL server for nightly backups.
Any advice would be very helpful.
Thanks
Ed
Hi.
I know this question has been posted before but after reading some other post I'm still a bit confuse of what to do?
In my database, I have a 3Mb data file and the transaction log file has growed to 500Mb and keep growing... Can you please advise what I should do to reduce it size and/or stop it from continue growing?
Thanks for your help.
Hello,
What if there are uncommited transactions in the log and backing up the database/logs does not trunicate the log and it still grows?
Thanks
wade
Hi there - I have an sms server which uses a sql 7 database. The transaction log on it keeps growing at an incredible rate (about 1gb p/w). The database was successfully backed up yesterday, and I thought that should delete the inactive entries in the log. Can someone tell me some steps to do reduce it to a regular size?
thanks for any help
Jonathan McCrea
I am running Microsoft SQL 2005 Express.
The transaction log of the main database has gotten huge and I just noticed it because the disk is nearly out of free disk space.
The database data file is 46MB and the transaction log is 210GB. This happended because autogrowth was on, and no limit was set I suppose.
So my goal is to knock this thing down to size, and set the max size of the transaction file to like 5GB.
I CANNOT do a backup of the transaction log because I do not have enough free space for such an operation. I tried doing:
DUMP TRANSACTION dbName
No luck, got the following error: Backup or restore requires at least one backup device.
Can I just stop the service and manually DELETE the transaction log file?
Thanks for the help.
hi all,
my tlogs at the subscriber are growing very large
irregardless of my recovery mode. any help
using snapshot-push replication
thanks,
joey
hi,
we have a SQL Server 2000 database which we set to 'SIMPLE' recovery mode at 6pm (due to nightly large data loads). We revert back to 'FULL' recovery mode at 6am.
My understanding was that in 'SIMPLE' recovery mode, the transaction log would not grow because it would automatically be truncated after a checkpoint. However this is not the case. I thought perhaps it could be due to a long running uncomitted transaction, but when I ran 'dbcc opentran', the oldest running transactions doesn't last for more than a couple minutes. I manually run a 'checkpoint' command as well in the hope of forcing the transaction log truncation. I repeat this a couple of times to no avail. When I run 'dbcc sqlperf(logspace)' , I can still see the transaction log growing.
It is not until I run 'backup log db with truncate_only' that the transaction log gets truncated.
I do not understand, why the transaction log does not get automatically truncated in SIMPLE recovery mode?
Andrew
Hi,
We have configured the following in the Publisher server..
1) Merge Replication - Synchronisation to be running in the continuous mode.
2) Merge Replication - Synchronisation in Scheduled mode.
The issue that we are facing here is the transaction log file of the databases which are in replication are growing very largely. And we get this error message in the Subscriber :
Error messages:
The Merge Agent failed to retrieve article information for publication 'MCC_Pos_CashlessPub'. Increase the -QueryTimeOut parameter and restart the synchronization. When troubleshooting, use SQL Profiler or restart the agent with a higher value for -HistoryVerboseLevel and check the output log file for errors. Correct any database engine conditions that may be causing internal replication stored procedures to fail. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147201017)
Get help: http://help/MSSQL_REPL-2147201017
The transaction log for database 'tempdb' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases (Source: MSSQLServer, Error number: 9002)
Get help: http://help/9002
In fact for the past two days there are no data movement or any changes to the table, still we are able to see the growth in the transaction log file.
As mentioned in the error description when checked the log_reuse_wait_desc column of the sys.databases table, it showed the value "LOG_BACKUP". So took database backup 3 times. and took transaction log backup 2 times from the subscriber server in which the error was thrown. Still the issue persists. There is no change in the transaction log size.
What is the reason behind the growth of LDF?? Is it because of Merge Replication Configured in the server??
Kindly check and let as know regarding this issue. We are facing lot of problems because of this issue. Thanks in advance.
Regards,
Swapna.B.
I have merge replication setup up for 6 SQLCE Subscribers.
I have noticed that the MSmerge_tombstone table is growing
at a fast rate regardless of any changes to the data in
the database. It seems to be consistantly adding 50 rows
of data to the table every 2 minutes. As the table grows
it causes the SQLCE subscirbers to fail with the following
message:
ERROR: -2147467259
SQL Server Reconciler failed: Run
ERROR: -2147200925
: Failed to enumerate changes in the filtered
articles.
ERROR: 0
: {call sp_MSsetupbelongs
(?,?,?,?,?,0,?,?,1,?,?,?,?,?,?)}
ERROR: 0
: The merge process timed out while executing a
query. Reconfigure the QueryTimeout parameter and retry
the operation.
I'm sure that this is due to the size of the
MSmerge_tombstone.
Should the MSmerge_tombstone table grow at this rate?
36,000 rows every 24hrs!
I understand there is the sp_mergecleanupmetadata Stored
procedure but if i use this does that mean that because i
have to reinitialise all the subscribers, they are going
to have to pull down the whole subscription again.
I have since Changed a settings to make subscription
expiration date to 8 days instead of never expires but
we're still getting 50 rows added every 2 minutes
SQL SERVER 2000 SP3
Hope someone can shed some light on this for me.
Thanks.
.
Hi All
I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.
If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.
I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.
set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN
It's got me stumped, so any ideas gratefully received.Thx
I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.
for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.
I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.
if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
and
Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.
Please help me it's very urgent.
I am getting this error :Distributed transaction completed. Either enlist this session in a new
transaction or the NULL transaction. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: Distributed transaction completed. Either
enlist this session in a new transaction or the NULL transaction.have anybody idea?!
i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.
Message is like this:
Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.
Hi,
i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".
my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.
Thanks in advance.
Hello,
Does 7.0 store db Growth rate information?
I am looking for information that tells me how fast a db is growing in MB and or percentages over a given period of time, ie weekly, monthly, yearly etc. Either in real numbers or estimates. Does 7.0 already store something like this or do I need to create some code for this?
Or does someone have something like this already coded that they would be willing to share?
Thank you in advance.
Troy
In SQL Server 7.0 sp1 (NT 4.0 sp5) I have a server that
has a tempdb database that continues to grow. This server
contains the database for SMS. Over the weekend, the tempdb
had grown so much that it filled up the drive (37GB). I have
shrunk it down to a much more reasonable size and put a limit
on how large it can grow. I'm noticing today that it is
beginning to grow again. Is there a way I can look at the
information that is in tempdb right now? I have to think
that there are open transactions for some reason that can't
commit. I know that tempdb gets cleared out when SQL Server
is restarted, but I can't be restarting it this often.
On Microsoft's website, I did find an article about SMS Y2K
queries using large amounts of Tempdb and failing to complete.
The solution they have in this article Q234912 is to install
SMS sp1 which is already installed.
I haven't been able to find any other useful information yet
on this problem. I would appreciate any help you can offer.
Thanks!
Toni
Why does a log (.ldf) file keep growing and growing and growing? Is this related to the fact that the scheduled Maintenance keeps failing due to exclusive access problems?
SQL Server 2000 Std.
Thanks!
Hi there,
My tempdb is growing from its normal size of 800MB to 2GB.
I've been shrinking it using dbcc shinkfile/ dbcc shrinkdatabase.
Everytime I run the command, immediately it says that the execution is completed and successful. However, when I checked the disk space, it remained the same, as though no shrinking is done. Can anyone help?
Also, it was published that restarting the SQL server can re-create tempdb from scratch. I've tried it too, the tempdb just wont go back to its normal allocation. My constraint is limited disk space, would appreciate any good samaritan to give me some help here.
Thanks in advance!
We have a database that's growing pretty fast because of firewall logs. We need the data available via an asp.net application. I don't have great experience with SQL other than installing and doing some development as a back end, so i'm wondering if there's a general rule of thumb of database size, when you should start breaking it out into smaller segments? if so, what are some good practices?
View 3 Replies View RelatedI have a database that seems to have grown out of control. I have tried deleting tables, but that has not really reduced the size. What could have caused the database to grow this big and what can I do to reduce it's size. I have backed up, truncated the logs, ran the shrink database command, all to no avail. Pleas help.
View 5 Replies View RelatedHi,
my log files are growing like anything. One of my log file size is 20GB.
How i have to reduce the log file size.
If i run DBCC command is it come backs...
Pls tell me the way how i have to find the free space and reduce logsizes.
After taking backups also my log file sizes are not reducing.
Thanks!
Kavira
Does anyone know at what point SQL Server 7.0 decides to grow the database when the autogrow option is set? Our site just went down for 45 minutes because the growing process was taking too long as compared to the data coming in, so the device filled up.
Ray? Craig? You guys seem to know all, so jobs.com appreciates your input...
I notice this morning that my tempdb grows very fast. I have 26GB in my
hardrive and all the space occupied by tempdb and finaly the qeury got failed due to 0 space in hardrive and there is no space to grow tempdb.
The select query supposed to bring about 40000 rows.
I ran this same query in different server that is not growing even 1 mb.
I checked the tempdb option the Trunc log on checkpoint is true.
Why this problem happening ?.
I have just dbo permission to access all the database.
Do you have any advice regarding this?.
Thanks,
Ravi
I have a database of 22 gb in sql 2000, my database option is set to full recovery mode, the problem i'm having is the tran log is growing too fast, this morning it was 24 gb, more than the database size. Can anyone help how I can keep it in a managable size?
Thanks in advance!!
Hi all
I have a DB with 1 data file, 1 log file and 1 index file.
data file is 3 GB but index file is 12 GB.
Index file is growing big day by day.
This cause performance of DB down.
What should I do to prevent index file become bigger and size of index file smaller?
Thanks in advanced
Thi Nguyen