Transactional Replication From SQL Server 2005 To SQL Server 2000
Nov 8, 2006
I am trying to test simple replication (only tables) of a database that resides on a SQL Server 2005 instance to a SQL Server 2000 instance. The Publisher and Distributer are set up on the SQL Server 2005 instance for Transactional replication. The subscriber is set up on in the 2000 instance. Replication Monitor shows the following error after applying a few scripts:
"Category: SQLSERVER Source SQLSERVER2000 Number: 170 Message: Line 6: Incorrect syntax near
'max'."
Here SQLSERVER2000 is the name of my 2000 instance, as should be obvious.
Beyond this point, replication fails. Any pointers as to where the problem could lie? Is this a known backward compatibility issue? I've checked all tables in the database and none contain any datatype that is new to 2005 (the database was actually created in and for SQL Server 2000.
Replication from 2000 to 2005 works fine, but the other way round is failing as described above. Any clues?
View 3 Replies
ADVERTISEMENT
Aug 29, 2006
we have the standard licensed copy for sql server 2005
while configure transaction replication not allow to move
message is required licesence for replication again i have to get license for
replication
please advice
View 2 Replies
View Related
Nov 8, 2007
Hi,
I setup transactional replication between 2005-> 2000 database for only one table. It works fine no problem. I checked replication monitor everything works well.
My Subscription was Push Subscription on Publisher.
This morning I restored main database at publication server, I saw all my publication configuration were gone.
I then went to create a publication and push subscription again..and did it, But when I went to replication monitor.
I checked that Snapshot are being created, but from distributor to Subscriber is saying below message?
"The concurrent snapshot for publication is not available because it has not been fully generated.....lONG CHPPPED off meassage"
Can any body tell me hwo to get over this issue?
Many Thanks
SKR
View 7 Replies
View Related
Mar 2, 2007
I have a publication on 2000 machine, replicating by pull subscription to a 2005 machine. I added a table to the Articles in the publication. Reinitialized the subscription, and also restarted both the snapshot and log reader agent. I was kind of assuming the publication would automatically create the table on the subscriber, but after a very long wait it is still not there. Am I missing anything?
PS. Distination Object setting : "Action if name is in use" is set to drop and create new, not that that should make any difference since name is not in use anyway.
Thanks
View 4 Replies
View Related
Aug 21, 2007
Sql Server 2000
I am looking for bidirectional transactional replication using updatable subscribers (queued or immediate) . Is it possible to replicate the image data from the updatable subscribers to the publisher. I understood that the Image data can't be replicated to the publisher from the updatable subscriber. I am not using the WRITETEXT or UPDATETEXT. I am using just INSERT and UPDATE for image data type transactions.
Any thoughts on this is greatly appreciated.
Thanks in advance
View 3 Replies
View Related
Aug 3, 2007
We have a SQL2000 database (Publisher) replicating inserts and updates across a 10Mb link to a SQL 2005 database (Subscriber). The Publisher has two tables we are interested in, 1 with 50 columns and 1 with 15. Both tables have 6 insert/update triggers that fire when a change is made to update columns on the publisher database.
We have set up a pull transactional replication from the Subscriber to occur against the Publisher every minute. We have limited the subscription/replication configuration to Publsih 6 columns from table 1 and 4 from table 2. Any change occuring on any other columns in the Publisher are of no interest. The SQL 2005 database has a trigger on table 1 and table 2 to insert values into a third table. There are around 7,000 insert/updates on table 1 and 28,000 on table 2 per day. All fields in the tables are text.
We are seeing "excessive" network traffic occuring of approximately 1MB per minute (approx 2GB per 24 hrs). We also see that the Distributor databases are getting very large -- upto around 30GB and growing until they get culled. We have reduced the culling intrval from 72 hrs to 24 hours to reduce the size.
Does anyone have any suggestions as to how this "excessive" network traffic can be minimised and how the distributor database size can be minimised. I think that maybe they are both related?
Thanks,
Geoff
WA POLICE
View 5 Replies
View Related
Jun 26, 2007
Hello,
Are there any requirements that dictate the SQL Server version for the distribution agent for a SQL 2000 publisher with a transactional push subscription to a SQL 2005 subscriber?
Thanks in advance,
John
View 3 Replies
View Related
Sep 21, 2007
Hello,
We previously having two servers A and B. Server A is used for updation of data and the data then replicated to server B. Server B is used for
Server A :
purpose : used for database updation/ modification
SQL Server version : SQL Server 2000 SP 2
Server Z :
purpose : used for Reporting
SQL Server version : SQL Server 2000 SP 2
We were doing Transactional replication from Server A to Server B.
Last month we have broght another server (Server B) with same hardware configuration but having SQL SERVER 2005 installed. This is to speed up our database update process. We have moved some of the database on this new server so that we can achieve our deadlines.
Server B :
purpose : used for database updation/ modification
SQL Server version : SQL Server 2005
I have set up the transactional replication from Server B to Server Z and replication works fine.
However, the issue is after it is started replicating from this new server (Server B) performance of all the queries reduced a lot.(making my life harder)
I didnt expected this as our reporting server is still SQL server 2000.
I have restored the backup of database which was replicated from server A (sql server 2000) and compared execution plan for one of our common query (which is used in most of the reports and which is now taking longer time to provide results)
I found that database which is replicated from Server B (Sql server 2005) is having primary keys. which was not present in the database which replicated from server A(Sql server 2000).
I have then removed the primary key and make the indexes same as previous copy of database(which was replicated from server A) But still the query takes long time.
Execution plan now shows "Table Spool" which was not present in previous copy of database.
Almost every query for this database is taking longer time now.
Can someone suggest me what is wrong and what should I need to fix.
Am I going on the right direction?
View 14 Replies
View Related
Dec 2, 2005
I'm currently trying out transactional replication with updatable subscriptions across two 2005 servers.
View 3 Replies
View Related
Jul 6, 2006
Hi
I have a setup where I need to replicate the database which is actually subscribing from another database. The current setup is all in SQL Server 2000. I need to now setup a Distrbutor on a SQL server 2005 and publish the database using this distributor to another server on SQL server 2000.
Has anybody done this before. If yes what will I need to check. Can you please let me know :-
1) SQL Server 2000 which SP should be installed to support this enviroment.
2) SQL Server 2005 which SP should be installed to support this environment.
3) Any thing that I need to look out for.
Thanks for any inputs on this.
Regards
View 3 Replies
View Related
Jun 12, 2006
Hi,
Transactional replication allows updatable subscriptions where changes at the subscriber are replicated up to the publisher, this can happen via Immediate Updating subscriptions, Queue subscriptions and P2P (new in SQL 2005), all forms of Transactional replication.
Any compared document between merge replication and Transactional with updatable subscribtion ?
Thanks,
Tarek Ghazali
SQL Server MVP
View 4 Replies
View Related
Feb 20, 2008
I doing a transactional replication with two servers. Server A, the Publisher and Distributor. Server B, the Subcriber. I did the replication using a dummy DB for practice purpose and it works fine. When I try to implement the replication in original DB, I found that some tables don't have primary keys and to be able to implement transactinal replication all the replicated tables need to have a primary key. I want to add the primary keys to those tables and also implement the replication but the problem is those tables have data in it. I'm thinking in create the new table and do a DTS to import the data to the new table or it's fine just to modify the table in design to add the primary key "Those table have record in it".
Some of you have any advice to me?
View 4 Replies
View Related
Apr 11, 2007
I am trying to replicate data from SQL Server 2000 to SQL Server 2005.previously we did it from 2000 to 2000 using script.
but when i am tring to use that script with 2000 to 2005 its not working i have made the necessary changes in the script.Is there major changes to replicate from 2000 to 2005
View 1 Replies
View Related
Nov 17, 2006
I have tried setting up transactional push replication using stored procedures and using wizards. I have two Publishers that are their own Distributors, and 1 Subscriber. All servers are running SQL 2000 SP4 build 2187. Replication appears to be working correctly, but on the Subscriber, under Replication > Subscriptions, the replication type is showing as 'Snapshot' instead of transactional for both subscriptions.
Any ideas?
Thanks.
View 4 Replies
View Related
Sep 5, 2005
Our database has grown to the point where our current server is struggeling with the query load. One option is to get a 4 processor machine with 16GB of RAM, but I'm also looking at transactional replication as a solution. Currently we run dual Xeon with 4GB of ram (using the /3GB switch in the OS) We have SQL 2000 Enterprise.
The idea is to setup a secondary server with transactional replication pushed from the main server, so that some SELECT-only queries can be executed on the secondary server - thus taking load of the main one. We should be able to add PKs to the small number of tables that currently don't have them, and we should be able to run all updates / inserts on the main server.I'll setup a push-subscription for the entire DB (maybe excluding some log tables) and then for ceratain stored procedures I'll direct our applications to use the backup instead of the main server.
So: Is this a good idea? Is it easy to backup the server using transactional replication? How much extra overhead will this mean for the main server?
View 1 Replies
View Related
Apr 17, 2008
Hi All,
Currently we use SQL 2K SP4 and snapshot replication with a Central Publisher with Remote Distributor toplogy.
I am looking to upgrade or migrate our SQL servers to SQL 2005 and was wondering what is the best way to do this for our replicated architecture?
Is the best way to run the SQL 2005 Upgrade on all 3 servers (publisher, distributor, subscriber) and should it automatically upgrade the servers including the replication components? Is there anything i should consider/watch out for when doing the upgrade and it involves replication (namely snapshot replication)?
Thanks in advance.
View 1 Replies
View Related
Sep 15, 2006
I want to replicate data from sql server 2000 to a sql server express 2005 box.
I can dts data across..but I want to be able to set up push replication from the Sql Server 2000 box, but the option to push the data to the Sql Express server in the GUI does not come up only Sql Server 2000 boxes are listed. Initially I will be using Snapshot replication but would like to eventually move on to transactional rep if only I can get it to push the data across.
Does anyone know how to acheive this thanks for any help Sammy.
View 3 Replies
View Related
Nov 10, 2006
SQL Server 2005 Books Online provides an article entitled, "Initializing a Transactional Subscription without a Snapshot". Is it possible in SQL Server 2000 to initialize transactional replication without a snapshot?
So far, I have been unable to find a similar procedure mentioned in the SQL 2000 Books Online. I was able to follow the 2005 procedure using SQL 2000 until I got to the step that says to enable the "Allow initialization from backup files" option on the "Subscription Options" tab of the "Publication Properties" dialog. But that option does not appear in the SQL 2000 version of the specified dialog box.
Any ideas?
View 4 Replies
View Related
Jun 5, 2006
We are attempting to rollout a name and address system to 10,000 users who will use an application connected to an MSDE database.
We are using transactional replication to distribute data updates to them. Clients are connecting via the On-Idle feature of Synchronization Manager to grab transactions.
Server spec:
Network card: 1GB
Processors: 2* Xeon 3.2Ghz
Server spec: DL380 2Gb memory
Concurrent connections set to: 600
Disc: RAID 10 with 6400 controller
We are not using hyper-threading.
So far we have rolled the system out to 3500 subscribers, 500 per day.
Each day a subsciber will receive at least 400 transactions and 5000 commands.
Latency is 6 seconds, delivery rate 180 commands per second at less busy times.
Latency is 14 seconds, delivery rate 127 commands a second at busy times.
I have seen it get as slow as 0.04 commands a seconds at busy times.
The server becomes incredibly slow when there are more than 50 concurrent connections.
We are seeing 100 CPU for most of the day as clients connect to the distributor at various times. Lunchtime is particularly busy when people go to lunch, leaving their machines idle. We see lots of "time-outs" and "unable to connect to distributor" messages on the replication monitor during peak times.
What can we do to improve the performance of the distribution server?
Are we being over-ambitious by selection SQL Replication for this scenario?
Thank you for any help!
Best wishes
Julian
View 1 Replies
View Related
Jun 15, 2015
How do we know our schema changes will propagate to subscriber without breaking the replication? Is there any t-sql command to find out the option true or false?
View 2 Replies
View Related
Jun 6, 2007
Hi,
I'd appreciate any help i can get here. I'm working with an MS SQL Server 2005 SP2 db on a Windows 2003 OS. I set up replication from an Oracle 10g instance a few months ago, and everything was working until i installed SP2 for SQL Server.
I get the following error:
2007-06-06 16:06:22.488 Status: 4096, code: 20024, text: 'Initializing'.
2007-06-06 16:06:22.488 The agent is running. Use Replication Monitor to view the details of this agent session.
2007-06-06 16:06:23.082 Status: 0, code: 1008, text: 'ORA-01008: not all variables bound
'.
2007-06-06 16:06:23.082 ORA-01008: not all variables bound
2007-06-06 16:06:23.082 Status: 0, code: 22037, text: 'Heterogeneous Logreader encountered an error in call to LoadReplCmds when processing state 'PROCESSSYNCDONE'.'.
I can get snapshot replication to work just fine, but transactional replication throws up the error above.
Anyone with any ideas on how i can proceed?
Thanks in advance!
Regards,
Rama.
View 7 Replies
View Related
Mar 19, 2015
Is there a way to force the snapshot to use a format file when bcp'ng the data to the subscriber?
The publisher and subscriber schemas are slightly different. Mainly added columns to the subscriber.
We have a post snapshot script that updates these additional columns on the subscriber.
I'd like to force the snapshot to use a format file, so it doesn't error when initially loading the data to the subscriber.
Is this possible?
View 1 Replies
View Related
May 17, 2015
We have installed 2014 sql server. We have currently 2008r2. We have to run the real time report. So we need to set up transactional replication b/n those two servers. We need to use 2008r2 as publisher and 2014 as subscriber.
Is it ok to have subscriber higher version than the publisher?
View 6 Replies
View Related
Jun 15, 2015
Any experience of success or failure setting up CDC on the subscriber end of transactional replication?
Also for a bonus answer, why are explicit index operations not permitted (I'm assuming this is even on the publisher?) From BOL:
• Explicitly adding, dropping, or altering indexes is not supported. Indexes created implicitly for constraints (such as a primary key constraint) are supported.
View 0 Replies
View Related
Sep 10, 2015
I have created a publication on SQL 2014 SP1/CU1 it is going to a distribution server also a SQL 2014 database. The subscriber is also SQL 2014 SP1/CU1. When I set it up there are no errors. I fire up Replication MGR and it looks good after the snapshot and distribution agent have been started. Again, no errors. When I do a tracer token the information gets to the distributer in 1 - 4 seconds but it never gets to the subscriber, the tracer token monitoring screen only shows pending for distributor to subscriber.
I can upload the scripts used to create the publication and/or the subscription but am a little hesitant because of server names in the scripts.
View 2 Replies
View Related
Jun 13, 2006
We have two SQL Server 2005 production DB at remote sites. Due to network bandwidth issue, we need to replicate these DBs (publishers and distributers) to central corporate SQL 2000 DB (subscriber for backup and possible reporting (and in rare case as a failover server).
We would start out with backup from SQL 2000 db restored on remote SQL 2005 DBs. When we have DB issue on remote 2005 DB, we want to restore it from central corp. 2000 DB backup. Since two DBs are replicating to central DB, we DO NOT want combined db back up data on restored remote 2005 db. We can restore the db and delete unwanted data before we turn on replication from this restored server. So, this is not a problem.
The real problem is how to avoid snapshot replication (during initialization) when we create a transaction replication on this restored server to avoid over writing data on the central subcriber sql 2000 DB???
HELP!!
View 5 Replies
View Related
Mar 15, 2007
I have used skiperrors parameter for 2601,2627 and 20598 errors in my Transaction replication setup. When transactions with above error are encountered, its skipped but I€™m not getting sql command that is skipped in MSrepl_errors table. Since SQL server 2000 is not saving transaction sequence number in the MSrepl_errors we are not getting the command, which have the errors.
Is there any way to track the commands those are skipped in transactional replication.
View 11 Replies
View Related
Feb 20, 2015
Is there a script to find which non-clustered indices are replicated? I know i can do this easily through GUI , having a script will make my life much easier ....
View 0 Replies
View Related
Jun 14, 2015
I am getting the error The transaction log for database 'ReplicationDB' is full due to 'LOG_BACKUP'.log_reuse_wait_desc from sys.databases is showing logbackup
The database is subscribed database. We configured transactional replication. But the transactional replication is getting errors and failed. Is there relation b/n this replication failures and log growth in subscriber db?
View 3 Replies
View Related
Sep 15, 2015
We have a large database with a small number of large tables in it (and a larger number of SMALLER tables), and it is a publisher for a transactional replication scenario. When I create a snapshot to initialize a new subscription, I notice with the larger tables that sometimes it generates multiple files in the snapshot folder, usually in multiples of 16, and numbers them like this:
MyTable_3#1.bcp
MyTable_3#2.bcp
...
MyTable_3#16.bcp
With other tables, I'll get just one LARGE snapshot file, named:
MyOtherTable_4.bcp
In the latter case, the file can be very large (most recent is 38GB).
In both cases, the subscription will eventually be initialized, but the smaller files will generate separate log entries every few minutes in the Replication Monitor, showing 'Bulk Copied data into 'MyTable' (34231221 rows)', whereas the larger table will generate only ONE log entry, showing 'Bulk coping data into table 'MyOtherTable', and it may take a couple of hours before there is anything else showing...except for an entry saying, 'The process is running and is waiting for a response from the server.'
My question is: what would be the difference between the two tables that would result in one generating MULTIPLE snapshot files, the other only a single, much larger one? The only difference I can see in the table definition is that the one generating multiple files has a clustered index, whereas the others do not.
View 0 Replies
View Related
Apr 28, 2015
Any TSQL script to monitor replication(Transactional, Snapshot) with current status ? I have tried below script but it giving error.
"Msg 8164, Level 16, State 1, Procedure sp_MSload_tmp_replication_status, Line 80
An INSERT EXEC statement cannot be nested."
DECLARE @srvname VARCHAR(100)
DECLARE @pub_db VARCHAR(100)
View 4 Replies
View Related
Jul 17, 2007
Hello
I have server "123456" SQL 2005 On clustered environment. I added permissions to snapshot folder, it is on sharing for both nodes.
I got error during the set up as:
Microsoft.SqlServer.ConnectionInfo
Additional Information:
An exception occurred while executing a TSQL or Batch(
Microsoft.SqlServer.ConnectionInfo)
An error occurred during the execution of xp_cmdshell. A call to "Create Process" failed with error code 5
Destination path d:Microsoft SQL ServerMSSQL.1MSSQLData is not Valid. Unable to list directory contents. Specify a valid destination path
Changed database context to 'master' (Microsoft SQL Server, Error 15121)
The datafolder exists, sql cluster service account from domain added in to snapshot folder, administrators access also on this folder.
Please advice how to troubleshoot this issues. Thanks, Jay
View 1 Replies
View Related
Jun 20, 2008
Hi All,
I am trying to configure Transactional replication with updatable subscription sql server 2005 with service pack 2.
Creating distributor and publisher on the same box, but subscriber on a different server.
Distributor and publisher are configured without any problem but when I try configuring subscriber, it throws below warning.
TITLE: New Subscription Wizard
------------------------------
Unable to set the Publisher login for the updatable subscription. You may have to set this up directly on the Subscriber machine using sp_link_publication.
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "REPLLINK_QA-WIN2K3-1413475264_ADVENTUREW1643387368_WELLCORE-542849619_ADVENTUREW1643387368" was unable to begin a distributed transaction.
Changed database context to 'AdventureWorks'.
OLE DB provider "SQLNCLI" for linked server "REPLLINK_QA-WIN2K3-1413475264_ADVENTUREW1643387368_WELLCORE-542849619_ADVENTUREW1643387368" returned message "The transaction manager has disabled its support for remote/network transactions.". (Microsoft SQL Server, Error: 7391)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.3152&EvtSrc=MSSQLServer&EvtID=7391&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I tried setting this up directly on the Subscriber machine using sp_link_publication but the same error.
Any help or suggestion are welcome.
Thanks
Sachin
Don't sit back because of failure. It will come back to check if you still available. -- Binu
View 7 Replies
View Related
