Transfer Manager
Oct 20, 2000
I have a database that I tried to shrink with no luck and have read to use the transfer Manager to transfer the data to a smaller database. Is this possible
to do?? Right now the database size is 31.5 Gig though the backups are only 14 Gig. I want to set the
database to about 20 gig.
Can anyone help me??
View 1 Replies
ADVERTISEMENT
Oct 22, 1998
I am using transfer manager in SQL 6.5 to copy a database and
all objects with data to another server. Transfer manager is not recreating all stored procedures. This even happens when I used it to another database on the same server. Any ideas??
View 3 Replies
View Related
Feb 16, 1999
Hello:
I have been trying to run transfer manager to transfer all of the data
from the production database on one server to a test database on another
server(to refresh it). In order to make sure it runs on the server, I have
been scheduling it under EM to do so and I am pointing to the log on the
destination server on the EM Transfer panel.
For some reason, I am getting the following message in the destination
server error log:
99/02/16 10:24:41.42 ods Error : 17824, Severity: 10, State: 0
99/02/16 10:24:41.42 ods Unable to write to ListenOn connection
'.pipesqlquery', loginname 'sa', hostname 'TEMP09'.
99/02/16 10:24:41.42 ods OS Error : 232, The pipe is being closed.
99/02/16 10:24:41.42 spid17 Error : 1608, Severity: 21, State: 2
99/02/16 10:24:41.42 spid17 A network error was encountered while sending
results to the front end. Check the SQL Server errorlog for more
information.
I checked the event viewer error log and see no messages for today.
Can any one advise me what I need to do for this to run successfully?
Thanks. Any information furnished will be greatly appreciated.
David Spaisman
View 1 Replies
View Related
Nov 17, 1998
When using transfer manager between two sql servers on two different machines, is it necessary to use the same character set, sort order?
View 1 Replies
View Related
Jun 14, 2000
Hello:
I need to develop an off-line database that replicates/copies some key tables for reporting. The info is fairly static (codes. etc.)and does not need to be real-time.
Is it feasible that I can set up a scheduled task on SQL 6.5 using Transfer Manager to copy & append data to this off-line db on a schedule.
I may not be able to set-up replication on our production server.
So, I am considering alternatives. Appreciate any input. Thank you :)
View 3 Replies
View Related
Sep 14, 1999
Hello:
I am running on mssql 6.5, sp4. We have been trying to use EM transfer manager to move one test database on one server to another database on another server.
We are dealing with 135 tables on this database. The transfer works up until about the 80th atble and then just dies but the scheduled task says it failed and check error log. The transfer creates the tables on the destination database but only loads the data until this one table.
WE use all of the options in EM Transfer manager which are st as defaults.
THere is no one on the source or destination databases locking this table.
Other smaller databases were successfully transferred from one database on one server to the other database on the other server without any problems today and yesterday.
Has any one run across something like this?
THanks.
David Spaisman
View 1 Replies
View Related
May 30, 2008
Is it possible/advisable when transfering very large amounts of data from server to server to:
trasnfer the data to a new table first
second alter new table adding indexes, defaults, ets based on original table
if it is what flow item would be used to transfer/alter the indexes and defaults?
I'm very new to ssis so the more detail you can give the better.
Thanks
View 5 Replies
View Related
Nov 2, 2007
A user was created with a limited privilege under the USERS group. Once this user loged in the Report Manager he is acting like an Admin and Content Manager, though he is not given even a browser role.
What do u think that this guy is acting like a Super User evenif he is restricted to a browser role on the Report Manager ????????????
I did all my best, but no luck so far
View 5 Replies
View Related
Jul 20, 2005
On one of our machines, all of the SQL Server 2000components except for the main Server component (SQL Servercore) itself were installed (Management tools, etc) a while agoand everything was running fine. Now I go and add/install theServer component and then Service Pack 3a.It seems that Service Manager won't start up (I get an hourglass cursor)and now I find that Enterprise Manager won't run as well. No errormessages appeared and I don't think I saw anything unusual inthe log file.However, I can use Enterprise Manager on a differentmachine and connect to the database (so the databaseitself seems to be running).Any suggestions as to what the problem might be and how tofix it? I like to see if I can repair this without havingto do a reinstall.Thanks.PF
View 2 Replies
View Related
Dec 6, 2006
IF someone can assist me. Everytime I load up enterprise manager the service manager turns off. And the enterprise manager can't connect to the local database. But everytime i turn it back on and try to connect again it shuts it off and around and around we go. Help would be appreciated. Thanks.
View 2 Replies
View Related
Mar 24, 2008
I am using SSIS 2005 on Windows 2003 server. Using Excel Source to dump the data for staging database.
I am getting following error while I execute it through BI studio's execute button.
Please help.
- Sachin
View 2 Replies
View Related
Mar 11, 2008
I have deployed my packages into Sql Server and I am using Configuration File. As my Data Source is Excel, I have changed the connection string during deployment with Server Path. But I am getting the following errors. Actually the File Exist in Path. May I know What is cause of the issue? Do I need to give any permission to execute the package.
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
component "Excel Source Service Contract Upload" (1) failed validation and returned error code 0xC020801C.
One or more component failed validation.
There were errors during task validation.
DTS_E_OLEDBERROR, Error Code: 0x80004005 Source: "MS JET DB Engine" Description : Path is not valid
View 27 Replies
View Related
Dec 27, 2007
Hi,
I am working on SQL Server 2005 (x64) with Windows Server 2003 (x64) operating system. I am having a major issue in SSIS. Here is the detailed explanation of the issue :
I have an EXCEL file in 2003 / 2007 version. It contains some data. I want to import the data using SSIS into SQL Server 2005 (x64) database table. I have taken "EXCEL FILE SOURCE" and "SQL Server DESTINATION". It was failed on importing data. Surprisingly it works fine in SQL Server 2005 (x32). Can you please explain why it is NOT woking on (x64) ?
Here is the error code i am getting:
[Excel Source [1]] Error: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.
Appreciate your time and patience !!
Thanks
View 3 Replies
View Related
Mar 19, 2014
In the full recovery model, if i run a transaction that inserts 10MB of data into a table, then 10 MB of data is moved in the data file. Does this mean then that the log file will grow by exactly 10MB as well?
I understand that all transactions are logged to the log file to enable rollback and point in time recovery, but what is actually physically stored in the log file for this transactions record? Is it the text of the command from the transaction or the actual physical data from that transaction?
I ask because say if I have two drives, one with 5MB/s write speed for the log file and one with 10MB/s write speed for the data file, if I start trying to insert 10 MB of data per second into the table, am I going to be limited to 5MB/s by the log file drive, or is SQL server not going to try and log all 10 MB each second to the log file?
View 6 Replies
View Related
Mar 1, 2007
Hi,
I have the following method which transfers data SQL to SQL on the same server but when I try to change the destination server it won't transfer the data. The method runs through as expected with no exceptions or errors but with no data transfered.
Private Sub TransferSQLData(ByVal SourceDetails As Admin_upload.EnvironmentDetails, ByVal DestinationDetails As Admin_upload.EnvironmentDetails)
'Transfer database from source to destination.
Dim oPackage As New DTS.Package2
Dim oConnection As DTS.Connection2
Dim oStep As DTS.Step2
Dim oTask As DTS.Task
Dim oCustomTask As DTS.TransferObjectsTask2
Try
oStep = oPackage.Steps.New
oTask = oPackage.Tasks.New("DTSTransferObjectsTask")
oCustomTask = oTask.CustomTask
oPackage.FailOnError = False
With oStep
.Name = "Copy Database design and data"
.ExecuteInMainThread = True
End With
With oTask
.Name = "GenericPkgTask"
End With
With oCustomTask
.Name = "DTSTransferObjectsTask"
.SourceServer = "MYSERVER"
.SourceUseTrustedConnection = True
.SourceDatabase = SourceDetails.MetaDB
.SourceLogin = SourceDetails.MetaUser
.SourcePassword = SourceDetails.MetaPWD
.DestinationServer = "MYSERVER"
.DestinationUseTrustedConnection = True
.DestinationDatabase = DestinationDetails.MetaDB
.DestinationLogin = DestinationDetails.MetaUser
.DestinationPassword = DestinationDetails.MetaPWD
.CopyAllObjects = True
.IncludeDependencies = False
.IncludeLogins = False
.IncludeUsers = False
.DropDestinationObjectsFirst = True
.CopySchema = True
.CopyData = DTS.DTSTransfer_CopyDataOption.DTSTransfer_ReplaceData
End With
oStep.TaskName = oCustomTask.Name
oPackage.Steps.Add(oStep)
oPackage.Tasks.Add(oTask)
oPackage.Execute()
Catch ex As Exception
LabelUploadMeta.Text = "Failed to Upload MetaData: " & ex.Message
Throw ex
Finally
oConnection = Nothing
oCustomTask = Nothing
oTask = Nothing
oStep = Nothing
If Not (oPackage Is Nothing) Then
oPackage.UnInitialize()
End If
End Try
End Sub
This works fine but when I set the following within the method:
.DestinationServer = "ANOTHERSERVER"
It won't transfer the data.
I can access the remote server and read and write data to it.
Any ideas?
View 1 Replies
View Related
Jun 16, 2000
Hi ,
Can anyone suggest me to transfer a database from 65 to 70.
I trasfer a database using DTS, but i am only getting data. I need my users , views, stored procedures, permissions.
I need to upgrade three databases from 65 to another 70 server.
i also generated a script from 65, but which is showing errors.
Could u pls give any suggestions.
thank u.
--Raj
View 1 Replies
View Related
Oct 8, 1999
I recently transferred a db from our production machine to a test machine. After the transfer was complete I realized that all copied logins were copied with blank passwords. Is this default behavior? Can I set the transfer to include passwords?
Dave King
View 3 Replies
View Related
Sep 13, 2005
Hi,
stupid question but i have forgotten how to transfer a DTS package between servers, its been so long since i last had to!!!
TIA
View 1 Replies
View Related
Feb 4, 1999
Hi Everybody...
I have recently tried to transfer my database over from one machine to another, but failed to do so because it gets jammed on 30%. I am just wondering if there is any other ways I can take to migrate the database over.
I am currently running sql server 6.5 in concurrent with iis 4 and nt4. I am trying to seperate the iis to a new server machine and sql server to another server.
Please advise me which route to take if you have any suggestions and your solution is important to me. Thanks!
-Ken
View 1 Replies
View Related
Oct 19, 2007
Hi,
I want to transfer rows from one database to another.
Source My Source tables in database 'Staging'
CustomersEng
Name
Age
StCode
CityCode
InternalID
CustomersSpanish
Name
Age
StCode
CityCode
InternalID
CustomersEng and CustomersSpanish contains a replica..only difference being that 'Name' in the CustomerSpanish table is written in spanish language. The Stcode, citycode and Internalid together makes the row unique.
Code BlockSample script
Create table #CustomersEng (name nvarchar(20),age int, st_code int,
citycode int, internalid int)
Insert into #CustomersEng values('Aron',23,1,1,12);
Insert into #CustomersEng values('Cathy',28,1,1,13);
Insert into #CustomersEng values('Zarog',33,1,1,14);
Insert into #CustomersEng values('Michale',25,1,2,12);
Insert into #CustomersEng values('Linda',43,1,2,13);
Insert into #CustomersEng values('Burt',53,1,2,14);
Create table #CustomersSpanish (name nvarchar(20),age int, st_code int,
citycode int, internalid int)
Insert into #CustomersSpanish values('Arona',23,1,1,12);
Insert into #CustomersSpanish values('Cathylo',28,1,1,13);
Insert into #CustomersSpanish values('Zarogo',33,1,1,14);
Insert into #CustomersSpanish values('Michalo',25,1,2,12);
Insert into #CustomersSpanish values('Lindalo',43,1,2,13);
Insert into #CustomersSpanish values('Burto',53,1,2,14);
---------------------------------------------------------------------------------------------------------------
Destination tables in database 'CMO'
CustomerMaster
CustomerId (identity) (pk)
StCode
CityCode
InternalID
CustomerDetails [customerid and languagecode together are primary keys]
CustomerId (fk)
Name
Age
languagecode
Language
languagecode (pk)
languagename
Code Block
Create table #CustomerMaster (customerid int identity(1,1), st_code int,
citycode int, internalid int)
Create table #CustomerDetails (customerid int,name nvarchar(20),age int,
languagecode int)
Create table #CustLanguage (languagecode int, languagename varchar(10))
Insert into #CustLanguage VALUES (1,'English')
Insert into #CustLanguage VALUES (2,'Spanish')
Code BlockEXPECTED OUTPUT
CustomerMaster
1 1 1 12
2 1 1 13
3 1 1 14
4 1 2 12
5 1 2 13
6 1 2 14
CustomerDetails
1 Aron 23 1
1 Arona 23 2
2 Cathy 28 1
2 Cathylo 28 2
3 Zarog 33 1
3 Zarogo 33 2
4 Michale 25 1
4 Michalo 25 2
5 Linda 43 1
5 Lindalo 43 2
6 Burt 53 1
6 Burto 53 2
How can i write t-sql for this?
thanks
View 4 Replies
View Related
Mar 17, 2008
Greetings,
I have an SSIS package that I need to modify. It was developed in Visual Studio 2005 and runs faithfully in production on SQL Server 2005. Suddenly, I can't open the package on my own workstation. I see a big red "X" image and a message stating "Microsoft Visual Studio is unable to load this document." The real reason the document can't be loaded appears to be:
Error loading DataWarehouseLoader.dtsx: The connection type "OLEDB" specified for connection manager "Warehouse Logging OLE DB" is not recognized as a valid connection manager type. This error is returned when an attempt is made to create a connection manager for an unknown connection type. Check the spelling in the connection type name.
Does anyone know what causes this and what I can do? The package has been in production for 9 months and I've never seen this problem before.
Thanks,
BCB
View 10 Replies
View Related
Feb 23, 2007
Hi All;
I know that in the SQL Server, the logins are not contained in the database (thanks to Kevin Yu) but I don't know where are they stored. For example if I want to transfer to another server I'll have to backup users too; but HOW?
In order to be more clear: When I simply take a backup from my server and restore it to my computer I can not login again with the user login information which is created on the server; However even if I make some changes; after backing the DB up from my computer and restoring to the server the logins are working (with re-mapping)
Thanks...
View 7 Replies
View Related
Mar 26, 2007
I had Sql Server 2005 installed on my machine, with that I am working on Visual Studio 2005. I just need to add an existing database into the app_data folder. The database is existing in the Sql server, it contains 180 tables so I cannot manually copy that tables in the app_data folder. for that is there any another way to copy all the tables into the database into the folder app_data with the data in the table.
Thanks & Regards
Girish Nehte
View 4 Replies
View Related
Apr 16, 2004
I recently transferred my SQL DB from one server to another, I backed the DB up, copied across and restored it into the new location, the problem is that I get the following error.
System.Data.SqlClient.SqlException: Invalid object name 'Table Name'
I have created a new user for this database and changed my code accordingly.
<%@ Import Namespace="System.Data.SqlClient" %>
<%@ Page Language="VB" Debug="true" %>
<Script Runat="Server">
Sub Page_Load
Dim conPubs As SqlConnection
Dim cmdSelectContacts As SqlCommand
Dim dtrContacts As SqlDataReader
conPubs = New SqlConnection("Server=Treebeard;UID=Intranet;Pwd=glglgl;Database=Contacts")
ConPubs.Open()
cmdSelectContacts = New SqlCommand ("Select * From Clientdata", ConPubs)
dtrContacts = cmdSelectContacts.ExecuteReader()
While dtrContacts.Read()
Response.Write( "<li>" )
Response.Write( dtrContacts( "c_forename" ))
End While
dtrContacts.Close
conPubs.Close()
End Sub
</script>
Any Ideas?
View 4 Replies
View Related
Aug 22, 2005
Hi everyone,I need some help transfering my database(SQL2005) to the host's server.In SQL 2000 I had the Management tools > DTS or ImportExport tools.SQL2005 lacks this, all I've got is Express Manager > can't connect to multiple databases.Can connect to one database and has a screen to excute TSQL commands.I don't want to have to recreate the whole database on the server.....This would be crazy... 150 stored procedures and 30 tables. Not to mention all the individual settings for each column.I know there is SQL Studio Management tools for the full version of SQL 2005. Anyone got any idea's ?Any input/suggestions is greatly appreciated.Thanks,JShep
View 1 Replies
View Related
Jan 16, 2006
I am trying to transfer my database from my computer where built it to another computer. I have microsoft SQL server 2005 CTP on my computer and the other computer has Microsoft SQL server.
Does anyone have any suggestions on how to do this??? I cannot find much info on SQL server 2005 CTP. I have found some info about the copy database wizzard, but I cannot find that in CTP.
Please any ideas or info would be wonderful
Thanks
Sarah
View 6 Replies
View Related
Mar 1, 2002
If I’m using the DTS Transfer SQL Object to move all objects and data from one server to another server and I make a schema change to source server, why is the dts package failing the next time I run it? Do I have to do some sort of refresh?
Any help!
View 1 Replies
View Related
May 11, 2001
I have a corrupt master db due to a rogue script that inserted lots of information into it. I have two SQL servers, and I could use some advice on the best way to copy the files over to the second server, then back after a reload of the first server. My main concern is the DTS packages I have built- I can't afford to lose those.
View 4 Replies
View Related
Jul 26, 2000
Hi,
I am in the process of upgrading database in sql server 6.5 to 7.0.
For that i am following one computer upgrade.
For creating dev environment in my computer i am using Transfer/Objects in 6.5
for transferring database from remote(production) computer to my computer.
Do i need only to transfer Userdatabase alone or do i need to Transfer Master and other ?
Or Is it better to restore dump ?
Thanks
View 4 Replies
View Related
Jul 12, 2000
HI,
If i transfer logins from one server to another server using dts, I am getting all the logins and permissions... How will i get passwords too..
-thank u.
--Siva
View 2 Replies
View Related
Sep 18, 2000
Does anyone have a sample SQL DMO script to transfer SQL Server logins from one server to another including the passwords ? any pointers will be greatly appreciated
View 1 Replies
View Related
Jul 30, 2000
Hello. Firstly apologies for what might appear as a basic question, but being a newbie and all :-). .
I have a SQL 7 DB, loads of sp, vw, tables etc. I want to copy this DB to another server so that all the DB and sp permissions stay current, all the sql logins come across etc etc.
I have tried restoring a backup to the new server (which worked fine), but then I appear to have lost the permissions for the tables and sp's.
I have then tried taking a copy of the original SQL master table and restoring this to the new server - but no luck.
Can anyone advise a sure method of copying an entire table and related entries (meaning sql logins etc) to a new server.
Appreciate any comments.
Regards
View 3 Replies
View Related
Aug 3, 2000
can any body can tell how data trnsfer from oracle database to sql server database. what is the methods i can use? is it required to write scripts.
if scripts required, can anybody can give me sample scipt.
View 1 Replies
View Related