Hi,
I need to copy a table between 2 different SQL servers.
There are a lot of different solutions :
-DTS
-Bulk Insert
-Replication
...
What are the pros and cons of these solutions ?
How to choose ?
Thanks
I have installed a msde engine (sql server 7 desktop) on a nt 4.0 sp6 workstation. I have around 17 megs of data
of need to transfer from a Sql Server 7 from a nt 4.0 sp6 Server. I can't get anything to work. Bcp complains
something to the effect there is no server attribute which is true because it is a work station. if I remove the
-S option it complains that I did not designate the server. This bcp script works just fine from SQL Server 6.5
on servers. DTS puts a message that I do not have a liscense to use DTS for the SQL Server Desktop. I tried
transfering the database to Access and then use the upsizing Wizard but the database is to big. I tried a bulk insert
but I got the vague message ' OLE DB provider 'STREAM' reported an error. The provider did not give any
information about the error' What is the best way to do this? Why am I having trouble with Bcp and Bulk insert?
Hi,
I 'am working with SQL Server7.0, and I need to transfer bulk of data(in millions) from aremote database in Rdb to SQL Server. What is the best approach other than using a comma delimited flat file? Is there a way to create a database link and then use a copy script in SQL to copy the data directly? I would appreciate any help. Thank You.
Jothi
Im having some issues with bulk insert.
This is the table:
CREATE TABLE [dbo].[tmp_GA_status](
[GA_recno] [int] NOT NULL,
[GA_desc] [varchar](40) NULL
)
This is the file (unicode):
1|"test1"
2|"test2"
3|"test3"
4|"test4"
5|"test5"
6|"test6"
7|"test7"
8|"test8"
and this is the sql:
bulk insert tmp_GA_status from 'C: empTextDumpGA_status.dta'
with (CODEPAGE='RAW', FIELDTERMINATOR='|', ROWTERMINATOR='
', DATAFILETYPE='widechar')
so yeah, pretty simple. But whatever I do I get this;
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 2 (GA_desc).
So what am I doing wrong ?
I'm trying to use Bulk insert for the first time and getting the following error. I think it might have something to do with my Format File and from the error msg there's a conversion error for the first column. In my database the Field is nvarchar(6) so my best guess is to use SQLNChar for the first column. I've checked the end of each line is CR LF therefore the is correct for line 7 right?
Msg 4863, Level 16, State 1, Line 1
Bulk load data conversion error (truncation) for row 1, column 1 (ASXCode).
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
BULK
INSERTtbl_ASX_Data_temp
FROM
'M:DataASXImportTest.txt'
WITH
(FORMATFILE='M:DataASXSQLFormatImport.Fmt')
[code]...
Hi,
i have a file which consists data as below,
3
123||
456||
789||
Iam reading file using bulk insert and iam inserting these phone numbers into table having one column as below.
BULK INSERT TABLE_NAME FROM 'FILE_PATH'
WITH (KEEPNULLS,FIRSTROW=2,ROWTERMINATOR = '||')
but i want to insert the data into table having two columns. if iam trying to insert the data into table having two columns its not inserting.
can anyone help me how to do this?
Thanks,
-Badri
Hello,
I'm just learning SSIS and I've hit my first bump. I am doing a bulk import from a tab delimited text file to an empty sql table that has a Idendity column defined. How do I tell the bulk insert task to skip that column when inserting from the text file. If I remove the identity column it imports the data fine, but I want to create the indentity column in the table too.
Thanks.
I've got a problem:
I want to transfer data between an sql server 2005 and my pocket pc. So i've installed a sql server CE on it.
I know that i can use the merge replication but, i don't have any IIS. So, i've got to transmit data though email that have got a file attached. I Know how to email from sql server 2005. When the pocket receive that email, i don't know how to insert the data in sql ce from outlook compact. Doi have tu use SSIS , in that case how can i run the package?
thanks
Hi!
I'm building a web application. I need to read data from a text or excel file and process the data and then store the result records into database. The record number is big. I can store the data record into database (SQL Server 2005) one at a time. I think it's slow. Is there any way to insert the data in bulk.
Thanks!
ccy
SQL Server 7.0 doesn't seem to support data files for bulk insert that have quoted text fields.
e.g.
" 1","Farmer","Joe","AAA","Smith John","",20001001,
I've tried using the format file to strip out the quotes. But, this doesn't seem to work.
My format file looks like this:
4.2
9
1 SQLCHAR 0 0 """ 0 dummy1
2 SQLCHAR 0 9 "","" 2 EmployeeID
3 SQLCHAR 0 35 "","" 3 LastName
4 SQLCHAR 0 35 "","" 4 FirstName
5 SQLCHAR 0 10 "","" 5 Category
6 SQLCHAR 0 35 "","" 6 Supervisor
7 SQLCHAR 0 5 ""," 7 OpCode
8 SQLCHAR 0 8 "," 8 HireDate
9 SQLCHAR 0 8 "
" 9 TermDate
Any idea on how I can bulk insert a data file where some of the fields are qutoed.
I have imported data in my table using the bulk insert command. I was supposed to fill specific columns of my table with that data so I used a view to put them in the column I wanted.
The table looks like this now:
id | id_param | val_param
+-----------+--------------+
1 | no_tel | 742062141
2 | sex | 1
3 | age | 23
4 | no_tel | 765234157
5 | sex | 1
6 | age | 34
When I want to select only the val_param that is=1 for the id_param=sex using this interogation:
select * from bd_rox where id_param='sex' and val_param='1'
it returns no value and I don`t know why.The wanted result should look like this:
id | id_param | val_param
+-----------+--------------+-
2 | sex | 1
5 | sex | 1
I manage a legacy system that dumps it's data into a number of different databases (same schema) on a nightly basis using bulk insert. I need to formulate a strategy for efficiently aggregating that data into a single database right after these nightly extractions complete. Here is my current stategy:
1. Duplicate the legacy system's database schema and add an identifier column to specify which database the data loaded from.
2. Each night, delete all records in the table.
3. Each night, for each database:
3a. Set each table's default value to a value that references the current database being loaded.
3b. Use the legacy system's flat files and format files to bulk insert into the database.
3c. Clear the default value.
What other steps would faciliate performance? Dropping and recreating the indexes? Does anyone forsee faults in this strategy?
Thanks,
Matt
Any help would be appreciated.I am running a script that does the following in succession.1-Drop existing database and create new database2-Defines tables, stored procedures and functions in the database3-Imports data using bulk insert4-Analyzes data using stored proceduresI would like to improve the performance of the analysis in step 4 bycreating indexes in step 2.Question 1-Are indexes updated when data is bulk inserted? I know they arewhen using normal insert, update, or delete T-SQL but I am not sure aboutbulk insert of data.Question 2-Do I need to update the index statistics in any way or would theybe ready to use in step 4.Thanks,CJ
View 2 Replies View Relatedbefore anyone even says it, i checked the collation order on everything and it's the same. i get the error when the snapshot is trying to be bulk copied to the subscriber.
i'm on sql2k sp4, server and db collations are SQL_Latin1_General_SP1_CI_AS. here's a repro. 1st, run this in a blank db:
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Event_Transactions]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[Event_Transactions]
GO
CREATE TABLE [dbo].[Event_Transactions] (
[EventTransactionId] [int] IDENTITY (1, 1) NOT NULL ,
[OrphanedFlag] [bit] NOT NULL ,
[ProcessedFlag] [bit] NOT NULL ,
[ProcessedTimeStamp] [datetime] NULL ,
[EventTimeStamp] [datetime] NOT NULL
) ON [PRIMARY]
GO
CREATE CLUSTERED INDEX [EventTransactions_IDX_ProcessedOrphanedEventTimeSt amp] ON [Event_Transactions] (
[ProcessedFlag],
[OrphanedFlag],
[EventTimeStamp]
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[Event_Transactions] ADD
CONSTRAINT [PK_Event_Transactions] PRIMARY KEY NONCLUSTERED
(
[EventTransactionId]
) ON [PRIMARY]
GO
insert into Event_Transactions (
OrphanedFlag
,ProcessedFlag
,ProcessedTimeStamp
,EventTimeStamp
)
values (
1
,0
,NULL
,'2004-05-07 15:15:24.000'
)
insert into Event_Transactions (
OrphanedFlag
,ProcessedFlag
,ProcessedTimeStamp
,EventTimeStamp
)
values (
0
,1
,'2004-07-08 13:04:01.513'
,'2004-07-07 16:52:08.000'
)
Now, use transactional replication to replicate it to another db taking all the defaults. when the distribution agent tries to apply the snapshot, it fails with the message mentioned in the title..
Has anyone ever seen this? It's keeping us from considering MS replication for one of our major products. Thanks.
Short version:
The best/fastest way to load large amounts of data from a comma delimited text file into an SQL Server table. Where the text file contains date fields in ccyy/mm/dd format and the SQL Server table defines those fields as datetime data types.
Details:
When I attempt to load files (using either bcp or BULK INSERT) containing datetime data the load process errors because the datetime fields in my text file are in ccyy/mm/dd format and the default format for SQL Server is mm/dd/yy. I have been unable to change the default format by using the SET DATEFORMAT statement (apparently the SET DATEFORMAT statement will not work for bcp because bcp runs outside of the SQL Server session???).
The only alternatives that I have come up with are: 1) Change the format of date fields in the text file from ccyy/mm/dd to mm/dd/ccyy. 2) Create a temporary table that defines the date fields as a char(n) datatype. Then load the data into the temp table. Then SET the DATEFORMAT to ccyy/mm/dd. Then copy the temp table into the permanent table (the permanent table using datetime data types).
Both of these alternatives would require additional processing time. Since this is a process that loads large amounts of data on a monthly (soon to be weekly) basis, speed is of the essence.
I would appreciate any suggestions.
Thanks!
Hi everyone. Does anyone know if you can retrieve truncated data from a BULK INSERT operation?
We have a file that needs to be inserted into a SQL Server Database. There is a field that has a maximum of 8000 characters, but some times users submit files that have more than that. We need to be able to capture the truncated data. The BULK INSERT operation does not throw an error. The only way I can think of to get the data is if I bulk insert the data into a temporary table with a memo field and then copy it over, but that may really slow down the SP.
Has anyone encountered this situation before? I also have the option of parsing the file in .NET.
Thanks and take care,
Angel
Hi, I´m trying to bulk insert files that looks like this:
aaaa,bbb,dddd,
ccc,dfd,tghj,
each file can have up to 10 data fileds per line, and each file will have same number of data fileds in particular file, let´s say 3 like above. Second file could have let´s say 10 and that is maximum.
I read the file and insert data with fieldterminator in temp table from witch I insert data to other tables regarding some parameters inside.
Now problem is:
Msg 4832, Level 16, State 1, Line 1
Bulk load: An unexpected end of file was encountered in the data file.
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
That is because I´m trying to insert 3 fields of data in temporary table which is made of 10 columns (It have to be 10 because next file could have 10 fileds of data). If the temp table has same number of columns like text file has data fields than it works.
What is solution for this problem?
Can I bulk insert NULL in columns for which I don't have data?
I can also import each line of text file to one column (with delimiter inside) but than I don´t know how to insert that data to correct tables or even to one table but to seperate data fields to columns with fieldterminator which is , in this case.
I'm new to SQL and I would apriciate any help.
Thank you
Hi,
I ran my package and it was successfu. I tried running it again, but this time it throws me this error:
Dim_T_Account [56575]: Unable to prepare the SSIS bulk insert for data insertion.
Error: 0xC004701A at CallerType, CallerChannel, Dealer, DODealer, HotlineType, Model, Reg'l Signal Code, Account, Contact, DTS.Pipeline: component "Dim_T_Account" (56575) failed the pre-execute phase and returned error code 0xC0202071.
Information: 0x40043008 at CallerType, CallerChannel, Dealer, DODealer, HotlineType, Model, Reg'l Signal Code, Account, Contact, DTS.Pipeline: Post Execute phase is beginning.
Why suddenly without changing anything, i encountered this error? What does it mean it cannot prepare the SSIS bulk insert. My connection to server is working ok.
cherriesh
Hi All,
I'm using DTS package, a tool to transfer data from a txt file to database(Bulk Insert).
The Bulk Insert task provides an efficient way to copy large amounts of data into a SQL Server table or view.It seems that the Bulk Insert task supports only OLE DB connections for the destination database. But I want to use sql server authentication as OLEDB connection requires windows authentication.
So can the bulk insert be done using SQLServer authentication ? if yes then please help me.
I have given the code snippet below.
Code Sample:
Dim oPackage As New DTS.Package2()
Dim oConnection As DTS.Connection
Dim oStep As DTS.Step2
Dim oTask As DTS.Task
Dim oCustomTask As DTS.BulkInsertTask
Try
oConnection = oPackage.Connections.New("SQLOLEDB")
oStep = oPackage.Steps.New
oTask = oPackage.Tasks.New("DTSBulkInsertTask")
oCustomTask = oTask.CustomTask
With oConnection
oConnection.Catalog = "pubs"
oConnection.DataSource = "(local)"
oConnection.ID = 1
oConnection.UseTrustedConnection = True
oConnection.UserID = "Tony Patton"
oConnection.Password = "Builder"
End With
oPackage.Connections.Add(oConnection)
oConnection = Nothing
With oStep
.Name = "GenericPkgStep"
.ExecuteInMainThread = True
End With
With oCustomTask
.Name = "GenericPkgTask"
.DataFile = "c:dtsauthors.txt"
.ConnectionID = 1
.DestinationTableName = "pubs..authors"
.FieldTerminator = "|"
.RowTerminator = "
"
End With
oStep.TaskName = oCustomTask.Name
With oPackage
.Steps.Add(oStep)
.Tasks.Add(oTask)
.FailOnError = True
End With
oPackage.Execute()
Catch ex As Exception
MsgBox("Error: " & CStr(Err.Number) & vbCrLf_
& Err.Description, vbExclamation, oPackage.Name)
Finally
oConnection = Nothing
oCustomTask = Nothing
oTask = Nothing
oStep = Nothing
If Not (oPackage Is Nothing) Then
oPackage.UnInitialize()
End If
End Try
Hey all
I have a bulk insert situation that would be nice to be able to pull off. I have a flat file with 46 columns that are to go into a table. The table, I want to have a 47th column to be updated later on by means of a stored proc saying if the import into the system was sucessful or not. I have the rowterminator set as '"' thinking that would tell SQL to begin on the next row, leaving the importstatus column null but i still receive an error.
First of all, is this idea possible within this insert statement. Secondly, if so, what would be the syntax to tell the insert statement to skip that particular column. It is the last column listed in the table so it just needs to start on the next row after it inserts the last bit of data in the flatfile.
If this is not possible, is it possible to bulk insert into a temp table?
Thanks
I need to load the following data into a SQL table. This is how the vendor is able to provide it to us.
CRCorp Daily Report,,,,,,
,,,,,,
Facility,Location,Purchase Order #,Vendor,Inventory #,Date Ordered,Extended Cost
09-Mowtown 495 CRST,09-402A Women's Imaging,327937,"BARD PERIPHERAL VASCULAR, INC.",113989,7/25/2014,650
09-Mowtown 495 CRST,09-402A Women's Imaging,327936,"WB MASON CO., INC.",112664,7/25/2014,8.64
01-Mowtown 499 CRST,01-302B Oncology,327947,McKesson General Medical,n/a,7/25/2014,129.02
[Code] ....
I have attempted to bulk insert it into this table with no luck.
CREATE TABLE POMaster
(Facility VARCHAR(75),
Location VARCHAR(75),
PONum INT,
VendorNm INT,
INVENTORYNUM VARCHAR(25),
orderDte DATE,
ExtendedPrice NUMERIC(10,2)
)
GO
It does not like the double quotes. How to make this format work? Do I need a format file?
I use bulk insert to fill a table
I use code bellow
bulk insert dbo.test
from 'c: est.txt'
with(FIRSTROW=2,FORMATFILE='c: est.xml'
go
but data inserted to table start from 3throw.
I want to bulk insert data into a table named scd_event_tab inside a database named rdb.
When I do select * from rdb.dbo.scd_event_tab, i get :
JOB_ID RUN_ONPRIORITYPAYLOADTIMEOUT_INTERVALSTATUSPICKUP_TIMESCD_TYPESCHEDULE_IDDB_ADMIN_LOGIN_REQUIRED_YN
I saved the result into a csv file and then truncated the table. Now, I am trying to bulk insert the data into the table. So I used:
bulk insert
rdb.dbo.scd_event_tab from 'C:userssluintel.ctrdesktopeventtab.csv'
with
(
codepage = 'RAW',
datafiletype = 'native',
fieldterminator = ' ',
keepidentity,
keepnulls
);
go
However, I get this error:
Msg 4867, Level 16, State 1, Line 1
Bulk load data conversion error (overflow) for row 1, column 1 (JOB_ID).
Msg 4866, Level 16, State 5, Line 1
The bulk load failed. The column is too long in the data file for row 1, column 3. Verify that the field terminator and row terminator are specified correctly.
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
I am running a set of SQL statements on a SQL server, to insert flat file data into a SQL table. The flat file is already FTP'ed to the SQL server. I seem to be getting an error, which is possibly pointing to a permissions issue
The statements:
BULK INSERT [Jedox_prod].[dbo].[B_BP_Customer]
FROM 'c:jedox_dailyjdcom4401.txt'
WITH
(
FIRSTROW = 2,
MAXERRORS = 0,
FIELDTERMINATOR = '|',
ROWTERMINATOR = '
'
)
GO
The error is :
Msg 4861, Level 16, State 1, Line 1
Cannot bulk load because the file "c:jedox_dailyjdcom4401.txt" could not be opened. Operating system error code 3(failed to retrieve text for this error. Reason: 1815)
If it is permissions issue, how do I overcome this?
hi
"Bulk insert data conversion error (truncation) for row 1, column 1 (id)."
when you get the error above or similar in sql server 2000 does it continue inserting the data by truncating it or does it stop beacause looking at the data that i have got it seems to continue inserting the data but just truncates the colunm. i have tried it several time its seeems to be consistent.
I have data that has white spaces after the actual data e.g. '00093 ' hence i am happy aslong as i can be sure that it does always continue as i will be loading alot of data using a similar process.
hence my question is that will it load all the data all the time and just truncate it to fit the column size?
Hi all,Hope there is a quick fix for this:I am inserting data from one table to another on the same DB. Theinsert is pretty simple as in:insert into datatable(field1, field2, field3)select a1, a2, a3 from temptable...This inserts about 4 millions rows in one go. And since I had the'cannot obtain lock resources' problem, several methods were suggestedby some web sites:1) one to split the insert into smaller chunks (I have no idea how Ican spit a insert to insert only n records at a time..)2)to use waitfor - which I did but did not fix the error.3)use bulk insert (in t-sql) - I dont know how to do this?As I see I am simply trying to move data from one table to another(ofcourse lots of data) in SQL Server 2000 and I dont see one simplesolution to the locking problem.any ideas on how best I can do this will save my day!thanks all.
View 9 Replies View RelatedHi Guys,
The way I understand a Data Flow Task is that it inserts the rows from the source to destination one by one. Is there a way to make it act like a bulk insert task? We have been experiencing performance issues when inserting a lot of rows from one table to another. If there's no way to actually do it, can a bulk insert task functionality be scripted? Coz what I need is a table to table insert, and the bulk insert task only accepts data files as sources.
Thanks!
Kervy
Hi,
I have a data file in the folloing format
SubjectId1|class1
SubjectId2|class2
SubjectId3|class3
I just wanted to insert only SubjectIds into my table 'Subjects' which has the follwing schama ignoring the classes
The row delimeter is "
" and the column delimeter is ' | '
Table Subjects
{
ID (Autoincrement)
SubjectId varchar(20)
}
Can any one provide the format file for doing this or suggest anyway to do this?
Please do note that the file may contain millions of records
Thank u
~mohan
USE TEST
GO
/****** BULK INSERT ******/
BULK
INSERT [Table01]
FROM 'C:empdata.csv'
[code]....
I am using above code to insert csv file data which consist of arabic data as well. Upload is successful however Arabic field data is uploaded with invalid characters and getting the following error Msg 4864, Level 16, State 1, Line 3...Bulk load data conversion error (type mismatch or invalid character for the specified codepage)
With "bcp MyDatabase.dbo.MyTable out C:MyFile.Dat -n -T" command line, I could get an exported data file. And I can also import this file into MyTable using 'BULK INSERT MyDatabase.dbo.MyTable FROM 'C:MyFile.dat' WITH (DATAFILETYPE='native');' query statement.
Now, I want to make my own data file just like made by bcp above. Although I could make file of 'char' type, 'native' type file is needed for performance and other reasons. And the format file should not be used.
Any one help?
Hi,
I have a data file and the contents of it are as follows
2 -- This is the header indicating the no of records in my files
1001|s1
1006|s2
The content of format file is as follows. This is to skip first column of the all the rows and get only Subs (i.e s1 and s2 )
9.0
2
1 SQLCHAR 0 100 "|" 0 ID ""
2 SQLCHAR 0 100 "
" 1 Subs ""
Here is my query to get all the Subs from my data file
SELECT * FROM OPENROWSET( BULK 'datafile.txt',
FORMATFILE = 'FormatFile.fmt',
FIRSTROW = 2 ) AS a
But this query retuns only s2 where i was expeting s1 and s2. The reason being is that the firts row i.e header doesn't follow the format
Can any one please let me know how to skip the first line in the data file and get the result as required
~Mohan
Does anyone know how to do a bulk insert using just the script task? I've been searching everyehere but can't seem to find a sample.
hi, i having a problem in bulk insert , which is regard the text file that
to insert into database, when insertion processing,
if my textfile have NULL value, it give me Bulk insert data conversion error
for example in my text file c:mytest.txt , it contains data NULL
123 studentname NULL
can we let bulk insert detect NULL value ?
i have try on putting "KEEPNULLS" , but it doesn't help , caused some fields in table may in datetime type
BULK INSERT [mytable] FROM c:mytest.txt WITH (FIELDTERMINATOR = '' '', ROWTERMINATOR = '''', KEEPNULLS )'
thank you