Transferring ACCESS DataBase(ABC.mdb) To SQL Table Using C#
Feb 14, 2008
I want to transfer ACCESS DataBase(ABC.mdb) to SQL Table Using c#.(SSIS Programming)
i need to use this query on access database
which will when run create 4 fileds
ABC.mdb
Sorce_Db_Id_Col
Attribute_Type
Attribute_Value
Query_Flag
And sorce database
Indentity_col
Att_typ
Att_value
Att_catg
I m very new in this stuff. so please please any one have any sample code for this then send me !
please i realy need it
My email id is ripal.parikh@softwaresolutionsindia.com
Thanks lot!!!!
I have recently started using VWD and SQl Express. I want to set up a catalogue of books on sql express of which there are three hundred which will then be presented on a web site. I already have most of the books on an access file. This may sound silly (I'm quite new to programming) but is there any way I can get sql express to extract information from the access file to save me writing it all out again? Thanks nick
I have an interesting challenge. we are not allowed to allow users direct access to data in our SQL Server. Audit requires us to take the data out of our production server and pass it to the user. my situation is i have a table in SQl with over 100,000 records and growing. i want to pass that to an access data base. i am utilizing DTS and a data transform.
i s there a better way? the package is running slow and even appears to freeze. i see this amount of data as growing as well.
I am using MS Access 2003 SP2 to maintain some data tables. I use SSIS to transfer them to SQL Server 2005, Enterprise Edition.
When I run the SSIS package from within Visual Studio 2005, the package runs without error.
When I try to run the same SSIS package by double-clicking on it in my File System (which invokes the Execute Package Utility, Version: 1.0) none of the tables get copied. Instead all I receive is a message for each table,
Error: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "Data Conversion 1" (49).
The only data conversion I perform is double-byte characters to single-byte characters.
Bob Bojanic, MSFT, made a few suggestions about this in another thread -- but I have created this new thread to help focus on this specific issue. In particular, he asked if we have installed the complete SSIS support for SQL Server 2005, Enterprise Edition, and my network support and database support staff assure me that such complete SSIS support was installed.
Are others having this problem?
Dan
(I just took a look at some of the transformations in the Data Conversion task, and many of them are using an Output Alias identical to the Input Column name. Might that be causing the problem? I will try changing the Output Alias for some tables and see if they then transfer correctly. The "identical name" Output Alias values were created by the Migration Wizard for a DTS 2000 package.)
Hi all,Here is my situation.I have an application that uses SQL 2000. The client has a programthat uses MSDE. The client MUST have the MSDE version of the Database.What I have done is to create a SQL 2000 Database that is exactly likethe MSDE version. What I wish to do, is at regularly scheduledintervals, update the SQL 2000 Data with the newest MSDE Data.On my clients server, they have both MSDE and SQL 2000 installedthe msde has a user name and password to access it, whereas the SQL2000 uses authenticated mode to access it.What I'm trying to do is to write a bunch of SQL Queries, that I canrun that will copy over the new Data, but I'm having problems accessingthe msde database in query analyzer from the SQL DatabaseCan anyone give me hints on the best way to try thisThanksScott
Currently I need to transfer existing database to another server. Unfortunately, after restoring all database file, user information is not available. It is stored in Master database.
I would like to know how can I transfer user login, database access, store procedures to another server ?
- INSERT INTO TABLE2 (COL1, COL2, COL3) SELECT COL1, COL4, COL7 FROM TABLE1 - what i want is i INSERT INTO TABLE2 (COL1, COL2, COL3) SELECT COL4, COL7 FROM TABLE1 Username (add one more value exp: Username)
I have a table on one server that I would like to copy over to another server. I have done the full backup and restore, however that seems to overwrite the formatting on all of my existing tables. As there are some differences in the tables between servers, I would prefer to not have to do the full restore. I have been able to use the SQL export utility to copy a table from one database to another on the same server, but I was wondering how that can be done between different servers with different Windows logins.
I need to transfer my database from one server to database on another server every 24 hours. I can create windows application but it will be cumbersome to write bulk of code . So can u suggest me some service or any other way through query or stored procedure by job scheduling which can run every 24 hours and move my data from one database on one server to another sql database. Both databases are sql server 2000 but servers are diffeerent so how to connect them while transferring dbs. ? plz help me , its urgent.
Hi I'm new to SQL server. What I'm trying to do is to automate the import of data from an Excel spreadsheet to a table within SQL Server. The index of the table has a seed set to increment by 1 and I assume that this is the same as the Autonum datatype in Access. When I import data I miss out this field as it is autogenerated, but the DTS package fails as it is trying to put a NULL in to this field. Where am I going wrong....is there something that I should change on the DTS import?
I have to pick up a row from Customers and transfer it to CustomerMaster and CustomerDetails. CustomerId of CustomerMaster will be the CustomerId of CustomerDetails while transfer.
I need to transfer my database from one server to database on another server every 24 hours. I can create windows application but it will be cumbersome to write bulk of code . So can u suggest me some service or any other way through query or stored procedure or by job scheduling which can run every 24 hours and move my data from one database on one server to another sql database. Both database systems are sql server 2000 but servers are diffeerent so how to connect them while transferring dbs. ? Any help is appreciated.
I am currently woking on transfering the table contents in sql server in an csv file i have created a stored procedure which would do same but the prob i am facing is the data in the table is not clean it contains tab,newline etc so i had to clean the data i had applied the folowing procedure
set @columns='' --'@columns+''replace(replace(replace(''+column_name +'',Char(10),''''''''),Char(13),''''''''),Char(19) ,'''''''')''' --print @sql select @columns=@columns+'replace(replace(replace('+colum n_name+',Char(10),''''),Char(13),''''),Char(19),'' '') as '+column_name+ ', ' from
[code]...
the table_name contains around 300 columns with the column_name of min 20 characters .When i run the above query i get only few columns instead of all the columns so i tried to find the length which gives me the result as 4000.I had declared @columns as Varchar(8000) i dont know why this issue is coming up?? is there any other way i can clean the data an the transfer it into the file
If TABLE2 has a data in resource 01-05 that isn't in resource01-05 of TABLE1 then I want to added it to the next free slot where ref is the unique key.
Hi,Ive been building a project on a local server and now need to transfer the files and database over to the live server. I have managed to transfer the files quite easily, however I am having a few problems transferring the database using Microsoft SQL Server Management Studio. When I try importing data to the live database, all the data and tables are brought across however some of the values for the fields are lost. For example all the fields which had a primary key no longer have one, and all the set default values for the fields are also lost. Ive been considering just going through every table in the database and re-entering the correct values for the fields, but this seems a bit time consuming and I'm also concerned about possible errors which could arise as there will be an inconsistency.Another method I tried was copying the SQL query across which created all the tables and the correct values for the fields. However when I tried to import the data an error was produced as you cannot import data into a table which has read only fields etc..Does anyone know a solution?Thanks for your time.
I need to transfer a database (contining one table) containing over 35 million records from one server to another. I have two options at present : (a) Use DTS to do the transfer (b) Copy the mdf file across and sp_attach_db it
Does any1 have a better idea, or does any1 know which of the two methods will be the quickest?
I have a SSIS package that transfers a couple of tables from one database to another database on the same server. It works fine in most of the machines we tested with. However on one of the customer machines, it consistently fails with the error message, The Return value was unknown. The process exit code was -1073741795. The step failed.
This package runs as a scheduled job on the sql agent. When i did a sql profiler to see what is going on, i noticed that the last step before the bulk insert, it gets the collation and the schema id of the 2 tables. My guess is, it compares these values from the source and destination databases and makes sure everything is ok before copying.
On a machine where this works, it goes ahead with the the next step which is the bulk insert itself. Whereas on the machines where it doesn't work, it stops right after this step. i.e. it does not even bother to call the 'bulk insert' api. Which makes me think it is doing some kind of validation with these values and it is getting something that is not expected.
If the collation or the schema was an issue, why throw an 'return value unknown' error? Can the error be more specific? Any other possible reasons for such a behavior? Any clues?
I set up a basic Transfer Database task (online, copy) to copy a DB. It works great except for the fact that it isn't transferring the PK's and FK's. It also looks like it did not transfer the views. Any idea why? Anything else the Transfer Database task doesn't actually transfer?
Hi All, I've got a problem transferring objects between SQL Databases. The source database is an SQL 2000 dbase, and the destination is a local SQL2005 instance. When trying to transfer I get the error: 0x80040E37 (table) does not exist at the source - but it does.
I am guessing its a schema related issue, I've tried setting the copyschema setting to true, but no joy. The copyallschemas function doesn't work with an SQL 2000 box so its set to false.
Hi all, I'm writing a procedure that require to access a table from a different database but from the same server. Can the procedure able to read this table. If so how should my procedure use that table? Thank you for all your help.
hi, i am using stored procedure which put data in another table fron different database.
so i am using servername.databasename.dbo.tablename.
if I am change the servername then i have to edit the Stored procedure. Is there any way to access server name.so that if server name is chane then also i dont have to change stored procedure.
Like in c we use #define where we change value of variable that is reflected in whole program.
Hi, I have 2 databases in SQL Server named Database1 and Database2. I have logged in Database1. I would like to see the records of the Table which is present in Database2. Could anyone please tell me How to access the tables in Database2 from Database1?
Does anybody know of a way to determine the last date/time a table has been accessed (query/update)? I've done enough research to know that this isn't easy. However, perhaps somebody has figured out a way through some of the stats that SQL Server keeps to determine the last access of a table. I have recently been put on a team that had no DBA and has a number of databases out there. They would like to determine which databases are inactive and get rid of them. I am a developer and haven't had much SQL Server Administration experience. Any info will help greatly! Thanks!
Hi there is there any way in tsql that I can tell when a database/table was last accessed? We have a lot of *** on our servers that need cleaning up.
If it is not possible could I put a trace on the servers that will tell me if any access has occured and run this for a couple of weeks for instance to see if any access has occured?
SELECT COUNT(*) FROM INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME = 'tab_db1'The above query will give the information of the table 'tab_db1' if it is available in the current database (say db1) connected.How can i access the information of a table (say 'tab_db2') which is created under a different database say db2 from the current db connected say db1.I tried the above query with changing the table_name to 'db2..tab_db2'but went invain.sysobjects also dint work..Any help on this will be appreciated..regards,Sathya V
I have created a .net application using visual studio .net and sql server destop edition on my pc. I have exported the database tables and stored procedures and imported them into a Sql Server database on a web hosting service. The web host does not allow me to access this database directly through visual studio .net.
My connection string to the external database works ok and I can access my stored procedures through my web pages. I know they accept parameters and that I can receive Return Values from them. However, whenever I try to access any of the tables on the external database through a stored procedure, I get a sqlException saying that the table cannot be found (Invalid object name 'UserList').
I have created a text type command which selects data from one of the tables and this runs through without any errors. I have also managed to Insert a row onto one of the external tables also by using a text type command. My only problem seems to be with commands using stored procedures.
Just in case this is the problem - the owner of the table/procedures on my desktop is shown as dbo but on the external database the owner of the tables is shown as [domainname].co.uk_dbuser while the stored procedures owner is still dbo.
Example of stored procedure on external database:
/****** Object: Stored Procedure dbo.AddUser Script Date: 01/03/2005 21:10:06 ******/ CREATE PROCEDURE dbo.AddUser ( @Username Varchar(20), @Password Varchar(20) ) AS ( Select User_ID From UserList Where User_Username = @Username ) GO
Have tried changing dbo.AddUser to [domain].co.uk_dbuser.Adduser but this would not save because there were too many full-stops!
Any help would be greatly appreciated as I am completely stuck.
Can anyone help me import a ms access (97) table into a sql 2005 express database? The sql database already contains other tables but I would like to add some of my older access tables to this database without having to re-enter all the data. Please help! Thanks!
I am pretty new to SSIS, so please excuse me if this is a trivial question.
I have a denormalized database table in an Access database that I need to import into several different tables in a SQL 2005 database. You can think of the Access table as a CustomerOrders table. For example customer related information (i.e. CustomerName, CustomerID, etc...) is repeated with each record in the Access table. When this data gets moved to the SQL 2005 database, I need to insert one record for each distinct CustomerName/Customer ID record into a Customers table. I then need to insert and link every "Order" record into an "Orders" table.
I am sure that this is probably a pretty common task, but I have not found any examples or articles explaining this particular situation. What ways can this be done?
I was thinking I need to loop through each DISTINCT Customer record in the Access (source) table and insert a Customer record into the destination database's Customer table. I would then need to iterate through each row of the Access (source) table and "Lookup" the appropriate CustomerID/Key Field and insert an "Order" record.
The Access table contains over 75,000 rows of data. I am looking for the most appropriate way of doing this with SSIS (so that I don't have to write a custom application to do this!). Any help, input, links, articles, etc. is appreciated!!
I am not sure I understand the problem I am causing, but I am a beginner!
Here's the situation: I have a table located on MS SQL server database number 1. Said table, which we'll call WIDGET_PRICES, is accessed regularly by my existing source code and has no problems.
At some point, I decide to move operations to MS SQL database number 2 and do a very simple database copy of WIDGET_PRICES from database 1 to database 2 using the Microsoft SQL Server Management Studio.
The end result, inevitably, is that my source code can no longer access the very same table as it is located on the new database server. The code hasn't changed, it's still trying to access WIDGET_PRICES as always. And, from what I see on my screen through Management Studio, WIDGET_PRICES appears just fine.
An example error is the one I just got:
Microsoft OLE DB Provider for SQL Server error '80040e37'
Invalid object name 'YB_ITEMS'.
/yardbark/tampabay/header.asp, line 27
The only clue is that while my transferred tables often look named like "database1.WIDGET_PRICES on database 1, they wind up looking like database2.WIDGET_PRICES on dabase 2.
I include a little more detail and screenshots of the tables in questions at this web page.