Trigger Errors(New)
May 19, 2008
Hi,
I am new to triggers in sql and I am trying to make this one to work.
CREATE TRIGGER NewRequestMailTrigger
ON form_tbl
AFTER INSERT
AS
Declare @body varchar(2000),
Declare @intDate datetime,
Declare @Name varchar(60)
BEGIN
SELECT intDate, Name, nbr, Org, RepEmail, RepName, ContactTel
FROM form_tbl
SET @body = 'Date: "' + @intDate + '" Name:' + @Name + '.'
--xp_sendmail sproc used to send the email
EXEC master..xp_sendmail
@recipients = 'myemail@myemail.com',
@subject = 'New Request',
@message = @body
END
GO
I keep getting this errors when trying to execute the trigger.
Msg 156, Level 15, State 1, Procedure NewRequestMailTrigger, Line 11
Incorrect syntax near the keyword 'Declare'.
Msg 156, Level 15, State 1, Procedure NewRequestMailTrigger, Line 12
Incorrect syntax near the keyword 'Declare'.
Any help will be very appreciated.
Thanks.
View 6 Replies
ADVERTISEMENT
Apr 29, 2008
Hello,
I'm trying to create a trigger that would reset the database column, A_STATUS from 'True' to 'False' when the appointment date, stored in the column, MY_DATE of the database table has been reached or passed. A_STATUS has a bit datatype.
My code is as below:
Code Snippet
CREATE TRIGGER ACLT_STATUS
ON dbo.MY_CONTACTS
AFTER INSERT, UPDATE, DELETE
AS
UPDATE dbo. MY_CONTACTS
SET A_STATUS = 'False'
WHERE (DATEDIFF(mi, 0, MY_DATE) <= DATEDIFF(mi, 0, GETDATE()))
When I run it, I get the error below:
The data in row 1 was not committed.
Error Source: Microsoft.VisualStudio.DataTools.
Error Message: The row value(s) updated or deleted either do not make the row unique or they alter multiple rows(1 rows).
Thanks.
View 4 Replies
View Related
Apr 3, 2008
Hi,
Please can anyone help me code the trigger below. I have had errors pointing to "sp_configure 'SQL Mail XPs', 1;" and "RECONFIGURE", that this lines should be not where I have placed them.
Code Snippet
CREATE TRIGGER reportBugs
ON Report_Bug
FOR INSERT, UPDATE, DELETE
AS
sp_configure 'SQL Mail XPs', 1;
EXEC master..xp_sendmail 'Marks',
'Don't forget to print a bug report.'
RECONFIGURE
View 4 Replies
View Related
Dec 12, 2006
if there is an error in the trigger then the update to the table does not happen. is there a way to make sql ignore errors in a trigger and still update the table
View 4 Replies
View Related
Apr 25, 2008
I wrote an update trigger to set a "Last Updated" value in a table.
I think that this may be causing optomistic concurrency errors when a recordset is updated more than once without being refreshed.
1) Does it make sence that this could be the problem
2) Is there a good way around this?
thanks
Jacob
View 4 Replies
View Related
Jul 1, 2015
I recently updated the datatype of a sproc parameter from bit to tinyint. When I executed the sproc with the updated parameters the sproc appeared to succeed and returned "1 row(s) affected" in the console. However, the update triggered by the sproc did not actually work.
The table column was a bit which only allows 0 or 1 and the sproc was passing a value of 2 so the table was rejecting this value. However, the sproc did not return an error and appeared to return success. So is there a way to configure the database or sproc to return an error message when this type of error occurs?
View 1 Replies
View Related
Jul 31, 2006
I have a parent package that calls child packages inside a For Each container. When I debug/run the parent package (from VS), I get the following error message: Warning: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
It appears to be failing while executing the child package. However, the logs (via the "progress" tab) for both the parent package and the child package show no errors other than the one listed above (and that shows in the parent package log). The child package appears to validate completely without error (all components are green and no error messages in the log). I turned on SSIS logging to a text file and see nothing in there either.
If I bump up the MaximumErrorCount in the parent package and in the Execute Package Task that calls the child package to 4 (to go one above the error count indicated in the message above), the whole thing executes sucessfully. I don't want to leave the Max Error Count set like this. Is there something I am missing? For example are there errors that do not get logged by default? I get some warnings, do a certain number of warnings equal an error?
Thanks,
Lee
View 5 Replies
View Related
Apr 20, 2006
Starwin writes "when i execute DBCC CHECKDB, DBCC CHECKCATALOG
I reveived the following error.
how to solve it?
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -2093955965, index ID 711, page ID (3:2530). The PageId in the page header = (34443:343146507).
. . . .
. . . .
CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1635188736)' (object ID -1635188736).
CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1600811521)' (object ID -1600811521).
. . . .
. . . .
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -8748568, index ID 50307, page ID (3:2497). The PageId in the page header = (26707:762626875).
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -7615284, index ID 35836, page ID (3:2534). The PageId in the page heade"
View 1 Replies
View Related
Nov 14, 2006
Hey,
I'm new to this whole SQL Server 2005 thing as well as database design and I've read up on various ways I can integrate business constraints into my database. I'm not sure which way applies to me, but I could use a helping hand in the right direction.
A quick explanation of the various tables I'm dealing with:
WBS - the Work Breakdown Structure, for example: A - Widget 1, AA - Widget 1 Subsystem 1, and etc.
Impacts - the Risk or Opportunity impacts for the weights of a part/assembly. (See Assemblies have Impacts below)
Allocations - the review of the product in question, say Widget 1, in terms of various weight totals, including all parts. Example - September allocation, Initial Demo allocation, etc. Mostly used for weight history and trending
Parts - There are hundreds of Parts which will eventually lead to thousands. Each part has a WBS element. [Seems redundant, but parts are managed in-house, and WBS elements are cross-company and issued by the Government]
Parts have Allocations - For weight history and trending (see Allocations). Example, Nut 17 can have a September 1st allocation, a September 5th allocation, etc.
Assemblies - Parts are assemblies by themselves and can belong to multiple assemblies. Now, there can be multiple parts on a product, say, an unmanned ground vehicle (UGV), and so those parts can belong to a higher "assembly" [For example, there can be 3 Nut 17's (lower assembly) on Widget 1 Subsystem 2 (higher assembly) and 4 more on Widget 1 Subsystem 5, etc.]. What I'm concerned about is ensuring that the weight roll-ups are accurate for all of the assemblies.
Assemblies have Impacts - There is a risk and opportunity impact setup modeled into this design to allow for a risk or opportunity to be marked on a per-assembly level. That's all this table represents.
A part is allocated a weight and then assigned to an assembly. The Assemblies table holds this hierarchical information - the lower assembly and the higher one, both of which are Parts entries in the [Parts have Allocations] table.
Therefore, to ensure proper weight roll ups in the [Parts have Allocations] table on a per part-basis, I would like to check for any inserts, updates, deletes on both the [Parts have Allocations] table as well as the [Assemblies] table and then re-calculate the weight roll up for every assembly. Now, I'm not sure if this is a huge performance hog, but I do need to keep all the information as up-to-date and as accurate as possible. As such, I'm not sure which method is even correct, although it seems an AFTER DML trigger is in order (from what I've gathered thus far). Keep in mind, this trigger needs to go through and check every WBS or Part and then go through and check all of it's associated assemblies and then ensure the weights are correct by re-summing the weights listed.
If you need the design or create script (table layout), please let me know.
Thanks.
View 4 Replies
View Related
Jul 20, 2005
Are there any limitations or gotchas to updating the same table whichfired a trigger from within the trigger?Some example code below. Hmmm.... This example seems to be workingfine so it must be something with my specific schema/code. We'reworking on running a SQL trace but if anybody has any input, fireaway.Thanks!create table x(Id int,Account varchar(25),Info int)GOinsert into x values ( 1, 'Smith', 15);insert into x values ( 2, 'SmithX', 25);/* Update trigger tu_x for table x */create trigger tu_xon xfor updateasbegindeclare @TriggerRowCount intset @TriggerRowCount = @@ROWCOUNTif ( @TriggerRowCount = 0 )returnif ( @TriggerRowCount > 1 )beginraiserror( 'tu_x: @@ROWCOUNT[%d] Trigger does not handle @@ROWCOUNT[color=blue]> 1 !', 17, 127, @TriggerRowCount) with seterror, nowait[/color]returnendupdate xsetAccount = left( i.Account, 24) + 'X',Info = i.Infofrom deleted, inserted iwhere x.Account = left( deleted.Account, 24) + 'X'endupdate x set Account = 'Blair', Info = 999 where Account = 'Smith'
View 1 Replies
View Related
Dec 5, 2006
This Audit Trigger is Generic (i.e. non-"Table Specific") attach it to any tabel and it should work. Be sure and create the 'Audit' table first though.
The following code write audit entries to a Table called
'Audit'
with columns
'ActionType' //varchar
'TableName' //varchar
'PK' //varchar
'FieldName' //varchar
'OldValue' //varchar
'NewValue' //varchar
'ChangeDateTime' //datetime
'ChangeBy' //varchar
using System;
using System.Data;
using System.Data.SqlClient;
using Microsoft.SqlServer.Server;
public partial class Triggers
{
//A Generic Trigger for Insert, Update and Delete Actions on any Table
[Microsoft.SqlServer.Server.SqlTrigger(Name = "AuditTrigger", Event = "FOR INSERT, UPDATE, DELETE")]
public static void AuditTrigger()
{
SqlTriggerContext tcontext = SqlContext.TriggerContext; //Trigger Context
string TName; //Where we store the Altered Table's Name
string User; //Where we will store the Database Username
DataRow iRow; //DataRow to hold the inserted values
DataRow dRow; //DataRow to how the deleted/overwritten values
DataRow aRow; //Audit DataRow to build our Audit entry with
string PKString; //Will temporarily store the Primary Key Column Names and Values here
using (SqlConnection conn = new SqlConnection("context connection=true"))//Our Connection
{
conn.Open();//Open the Connection
//Build the AuditAdapter and Mathcing Table
SqlDataAdapter AuditAdapter = new SqlDataAdapter("SELECT * FROM Audit WHERE 1=0", conn);
DataTable AuditTable = new DataTable();
AuditAdapter.FillSchema(AuditTable, SchemaType.Source);
SqlCommandBuilder AuditCommandBuilder = new SqlCommandBuilder(AuditAdapter);//Populates the Insert command for us
//Get the inserted values
SqlDataAdapter Loader = new SqlDataAdapter("SELECT * from INSERTED", conn);
DataTable inserted = new DataTable();
Loader.Fill(inserted);
//Get the deleted and/or overwritten values
Loader.SelectCommand.CommandText = "SELECT * from DELETED";
DataTable deleted = new DataTable();
Loader.Fill(deleted);
//Retrieve the Name of the Table that currently has a lock from the executing command(i.e. the one that caused this trigger to fire)
SqlCommand cmd = new SqlCommand("SELECT object_name(resource_associated_entity_id) FROM
ys.dm_tran_locks WHERE request_session_id = @@spid and resource_type = 'OBJECT'", conn);
TName = cmd.ExecuteScalar().ToString();
//Retrieve the UserName of the current Database User
SqlCommand curUserCommand = new SqlCommand("SELECT system_user", conn);
User = curUserCommand.ExecuteScalar().ToString();
//Adapted the following command from a T-SQL audit trigger by Nigel Rivett
//http://www.nigelrivett.net/AuditTrailTrigger.html
SqlDataAdapter PKTableAdapter = new SqlDataAdapter(@"SELECT c.COLUMN_NAME
from INFORMATION_SCHEMA.TABLE_CONSTRAINTS pk ,
INFORMATION_SCHEMA.KEY_COLUMN_USAGE c
where pk.TABLE_NAME = '" + TName + @"'
and CONSTRAINT_TYPE = 'PRIMARY KEY'
and c.TABLE_NAME = pk.TABLE_NAME
and c.CONSTRAINT_NAME = pk.CONSTRAINT_NAME", conn);
DataTable PKTable = new DataTable();
PKTableAdapter.Fill(PKTable);
switch (tcontext.TriggerAction)//Switch on the Action occuring on the Table
{
case TriggerAction.Update:
iRow = inserted.Rows[0];//Get the inserted values in row form
dRow = deleted.Rows[0];//Get the overwritten values in row form
PKString = PKStringBuilder(PKTable, iRow);//the the Primary Keys and There values as a string
foreach (DataColumn column in inserted.Columns)//Walk through all possible Table Columns
{
if (!iRow[column.Ordinal].Equals(dRow[column.Ordinal]))//If value changed
{
//Build an Audit Entry
aRow = AuditTable.NewRow();
aRow["ActionType"] = "U";//U for Update
aRow["TableName"] = TName;
aRow["PK"] = PKString;
aRow["FieldName"] = column.ColumnName;
aRow["OldValue"] = dRow[column.Ordinal].ToString();
aRow["NewValue"] = iRow[column.Ordinal].ToString();
aRow["ChangeDateTime"] = DateTime.Now.ToString();
aRow["ChangedBy"] = User;
AuditTable.Rows.InsertAt(aRow, 0);//Insert the entry
}
}
break;
case TriggerAction.Insert:
iRow = inserted.Rows[0];
PKString = PKStringBuilder(PKTable, iRow);
foreach (DataColumn column in inserted.Columns)
{
//Build an Audit Entry
aRow = AuditTable.NewRow();
aRow["ActionType"] = "I";//I for Insert
aRow["TableName"] = TName;
aRow["PK"] = PKString;
aRow["FieldName"] = column.ColumnName;
aRow["OldValue"] = null;
aRow["NewValue"] = iRow[column.Ordinal].ToString();
aRow["ChangeDateTime"] = DateTime.Now.ToString();
aRow["ChangedBy"] = User;
AuditTable.Rows.InsertAt(aRow, 0);//Insert the Entry
}
break;
case TriggerAction.Delete:
dRow = deleted.Rows[0];
PKString = PKStringBuilder(PKTable, dRow);
foreach (DataColumn column in inserted.Columns)
{
//Build and Audit Entry
aRow = AuditTable.NewRow();
aRow["ActionType"] = "D";//D for Delete
aRow["TableName"] = TName;
aRow["PK"] = PKString;
aRow["FieldName"] = column.ColumnName;
aRow["OldValue"] = dRow[column.Ordinal].ToString();
aRow["NewValue"] = null;
aRow["ChangeDateTime"] = DateTime.Now.ToString();
aRow["ChangedBy"] = User;
AuditTable.Rows.InsertAt(aRow, 0);//Insert the Entry
}
break;
default:
//Do Nothing
break;
}
AuditAdapter.Update(AuditTable);//Write all Audit Entries back to AuditTable
conn.Close(); //Close the Connection
}
}
//Helper function that takes a Table of the Primary Key Column Names and the modified rows Values
//and builds a string of the form "<PKColumn1Name=Value1>,PKColumn2Name=Value2>,......"
public static string PKStringBuilder(DataTable primaryKeysTable, DataRow valuesDataRow)
{
string temp = String.Empty;
foreach (DataRow kColumn in primaryKeysTable.Rows)//for all Primary Keys of the Table that is being changed
{
temp = String.Concat(temp, String.Concat("<", kColumn[0].ToString(), "=", valuesDataRow[kColumn[0].ToString)].ToString(), ">,"));
}
return temp;
}
}
The trick was getting the Table Name and the Primary Key Columns.
I hope this code is found useful.
Comments and Suggestion will be much appreciated.
View 16 Replies
View Related
Oct 30, 2007
Table 1
First_Name
Middle_Name
Surname
John
Ian
Lennon
Mike
Buffalo
Tyson
Tom
Finney
Jones
Table 2
ID
F
M
S
DOB
1
Athony
Harold
Wilson
24/4/67
2
Margaret
Betty
Thathcer
1/1/1808
3
John
Ian
Lennon
2/2/1979
4
Mike
Buffalo
Tyson
3/4/04
5
Tom
Finney
Jones
1/1/2000
I want to be able to create a trigger that updates table 2 when a row is inserted into table 1. However I€™m not sure how to increment the ID in table 2 or to update only the row that has been inserted.
View 17 Replies
View Related
Feb 5, 2008
A
ID
Name
1
Joe
2
Fred
3
Ian
4
Bill
B
ID
1
4
I want to be able to create a trigger so that when a row is inserted into table A by a specific user then the ID will appear in table B. Is it possible to find out the login id of the user inserting a row?
I believe the trigger should look something like this:
create trigger test_trigger
on a
for insert
as
insert into b(ID)
select i.id
from inserted i
where
--specific USER
View 9 Replies
View Related
Mar 18, 2008
how to create new CLR trigger from existing T-Sql Trigger Thanks in advance
View 3 Replies
View Related
Jul 23, 2005
When a row gets modified and it invokes a trigger, we would like to beable to update the row that was modified inside the trigger. This is(basically) how we are doing it now:CREATE TRIGGER trTBL ON TBLFOR UPDATE, INSERT, DELETEasupdate TBLset fld = 'value'from inserted, TBLwhere inserted.id= TBL.id....This work fine but it seems like it could be optimized. Clearly we arehaving to scan the entire table again to update the row. But shouldn'tthe trigger already know which row invoked it. Do we have to scan thetable again for this row or is their some syntax that allows us toupdate the row that invoked the trigger. If not, why. It seems likethis would be a fairly common task. Thanks.
View 4 Replies
View Related
Jul 20, 2005
Salve, non riesco a disabilitare un trigger su sqlserver nè da queryanalyzer, nè da enterprise manager.In pratica tal cosa riuscivo a farla in Oracle con TOAD, mentre qui nonriesco.Mi interessa disattivarlo senza cancellarlo per poi riattivarlo al bisognosenza rilanciare lo script di creazione.Grazie a tuttiHi I need to disable a DB trigger and I'm not able to do this neither withquery analyzer, neither with enterprise manager.I remeber this job was quite simple using TOAd in Oracle.I'm interested in making it disabled not delete it, without run creationscript.Thanks a lot to everybody.
View 4 Replies
View Related
May 30, 2008
Hi,
I am not sure if this is the right forum to post this question.
I run an update statement like "Update mytable set status='S' " on the SQL 2005 management Studio.
When I run "select * from mytable" for a few seconds all status = "S". After a few seconds all status turn to "H".
This is a behaviour when you have an update trigger for the table. But I don't see any triggers under this table.
What else would cause the database automatically change my update?
Could there be any other place I should look for an update trigger on this table?
Thanks,
View 3 Replies
View Related
Sep 20, 2007
Hi all in .net I've created an application that allows creation of triggers, i also want to allow the deletion of triggers.
The trigger name is kept in a table, and apon deleting the record i want to use the field name to delete the trigger
I have the following Trigger
the error is at
DROP TRIGGER @DeleteTrigger
I'm guessing it dosen't like the trigger name being a variable instead of a static name
how do i get around this?
thanks in advance
-- ================================================
-- Template generated from Template Explorer using:
-- Create Trigger (New Menu).SQL
--
-- Use the Specify Values for Template Parameters
-- command (Ctrl-Shift-M) to fill in the parameter
-- values below.
--
-- See additional Create Trigger templates for more
-- examples of different Trigger statements.
--
-- This block of comments will not be included in
-- the definition of the function.
-- ================================================
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
CREATE TRIGGER RemoveTriggers
ON tblTriggers
AFTER DELETE
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
Declare @DeleteTrigger as nvarchar(max)
select @DeleteTrigger = TableName FROM DELETED
IF OBJECT_ID (@DeleteTrigger,'TR') IS NOT NULL
DROP TRIGGER @DeleteTrigger
GO
END
GO
View 7 Replies
View Related
Jan 23, 2008
Hi,
I have a trigger set on TABLE1 so that any update to this column should set off trigger to write to the AUDIT log table, it works fine otherwise but not the very first time when table1 has null in the column. if i comment out
and i.req_fname <> d.req_fname from the where clause then it works fine the first time too. Seems like null value of the column is messing things up
Any thoughts?
Here is my t-sql
Insert into dbo.AUDIT (audit_req, audit_new_value, audit_field, audit_user)
select i.req_guid, i.req_fname, 'req_fname', IsNull(i.req_last_update_user,@default_user) as username from inserted i, deleted d
where i.req_guid = d.req_guid
and i.req_fname <> d.req_fname
Thanks,
leo
View 7 Replies
View Related
Feb 25, 2000
When using the following format & .cmd file keep getting this error . . .
DB-LIBRARY error:
Unexpected EOF encountered in BCP data-file.
Have checked the .fmt & .cmd files & also the table layout that the data is being loaded into. Any help would be appreciated.
FMT File
6.0
28
1 SQLCHAR 0 30 "" 1 UserName
2 SQLCHAR 0 32 "" 2 Password
3 SQLCHAR 0 8 "" 3 PasswordExpirationDate
4 SQLCHAR 0 2 "" 4 HintQuestionID
5SQLCHAR 0 25 "" 5HintAnswer
6SQLCHAR 0 40 "" 6EmailAddress
7 SQLCHAR 0 1 "" 7MarketingEmailInd
8 SQLCHAR 0 1 "" 8 StatusEmailInd
9 SQLCHAR 0 30 "" 9 FirstName
10 SQLCHAR 0 30 "" 10 LastName
11 SQLCHAR 0 1 "" 11MiddleInitial
12 SQLCHAR 0 3 "" 12 Suffix
13SQLCHAR 0 9 "" 13SSN
14SQLCHAR 0 8 "" 14DOB
15SQLCHAR 0 1 "" 15 CustType
16SQLCHAR 0 1 "" 16GradeLevel
17SQLCHAR 0 1 "" 17 SharedComputerInd
18SQLCHAR 0 8 "" 18 SchoolCode
19 SQLCHAR 0 2 "" 19CampusCode
20 SQLCHAR 0 50 "" 20 SchoolName
21 SQLCHAR 0 8 "" 21 SchoolLastVerfiedDate
22 SQLCHAR 0 8 "" 22 DateCreated
23 SQLCHAR 0 8 "" 23 LastLoginDate
24 SQLCHAR 0 4 "" 24 LoginCount
25 SQLCHAR 0 4 "" 25 BadLoginCount
26 SQLCHAR 0 1 "" 26 Status
27 SQLCHAR 0 30 "" 27 LastModifiedUser
28 SQLCHAR 0 8 ";
" 28 LastModifiedDate
CMD File
BCP DEVL_CUSTOMER_DB..tblRegistered_Users_TempX in T:custbasedataincomingRegistered_User.txt /f T:custbaseapplsqlcpbuser.fmt /e T:custbasedata
eportsbuseri.err /o T:custbasedata
eportsbuseri.out /b 1000 /SDataserverjmk /User /Password
View 4 Replies
View Related
Jul 23, 1999
I have been receiving 644 errors on an index for one of my tables. We have dropped and rebuilt the index. Even BCP out, drop the table, create the table and BCP in everything and still have problems.
Has anyone else experienced problems with 644 errors? Did you ever determine the cause and are they any preventative ideas?
TIA
View 2 Replies
View Related
May 24, 2005
I get this error when i try to modify or fix a job
Cannot add, update, or delete a job(or ists steps or shcedules) that aoriginated from an MSX Server.
error 14274
Why is this? Any ideas. I checked the sysjobs in the msdb and they have the correct server name for the jobs?
View 2 Replies
View Related
May 11, 2004
Ok, whenever I try to connect, I get the following Error messages:
"SQL Server Registration failed because of the connection failure displayed below.
SQL Server does not exist or access denied.
ConnectionOpen (Connect())"
"An Error 1069 occured while performing this service operation on the
MSSQLServer Service"
I even went as far as uninstalling and reinstalling, but to no avail. Does anyone have an idea what's causing this? It was working fine and then all the sudden one day I start getting these messages and it won't work.
Thanks!
Smitty
View 6 Replies
View Related
May 5, 2008
I have a dynamics db that is used for archival purposes and it is not used very often. Now that someone decided to get some info out of it it wont let them. when I run dbcc I get the following message:
Msg 5242, Level 16, State 1, Line 1
An inconsistency was detected during an internal operation in database 'PACIF'(ID:12) on page (1:19451). Please contact technical support. Reference number 6.
Msg 8921, Level 16, State 1, Line 1
Check terminated. A failure was detected while collecting facts. Possibly tempdb out of space or a system table is inconsistent. Check previous errors.
I was just wondering if this meant anything to any of you? and since all of my backtapes have the same issue, is there any way to fix it?
thanks in advance.
View 11 Replies
View Related
Jun 5, 2007
Failer to generate user instance is the error.
View 1 Replies
View Related
Jan 21, 2008
Running SQL 05 Standard on a Vista box and I have about had it with Vista. Anytime I try to launch Config Manager I get Cannot connect to WMI provider. You do not have permission or the server is unreachable. So try I googled and tried everything I can fine from http://blogs.msdn.com/echarran/archive/2006/01/03/509061.aspx
C:Program FilesMicrosoft SQL Server90Shared>mofcomp "C:Program FilesMicrosoft SQL Server90Sharedsqlmgmproviderxpsp2up.mof" and now I get ..
An error occurred while processing item 10 defined on lines 73 - 79 in file C:s
qlmgmproviderxpsp2up.mof:
Error Number: 0x80041003, Facility: WMI
Description: Access denied
Compiler returned error 0x80041001
so I try every possible different permission setting for anything sql server - problem still happening... try procmonitor.. find the registry keys and grant full contorl to all of them.. problem still happending.. run the little fixwmi.cmd I found.. problem still happening..
try to uninstall SQL Server.. NOT - WMI error - try to reinstall over--- NOT WMI error.
What do I need to do to get this working. .this is becoming a serious hinderance to my productivity!!!
View 15 Replies
View Related
Jun 11, 2007
what a want to know is if there s a way to log sql server errors on a log file, table, these errors are not sql server logs which already exists, i want to log dead locks, sql server timeout errors vs on sql server or somewhere.
is it possible ?
may i use sql server profiler for that purpose?
thx in advance..
View 1 Replies
View Related
Jul 13, 2006
Hi Expert,
I have a datagrid which is filtering by a dropdownlist and a search textbox.
The dropdownlist allows to select the column they want to search.
The search textbox allows to enter the item they want based on the selection from dropdown.
Now I use a StoreProcedure to select the data they need, so I pass-in @DropDownListValue int and some others parameters, such as @ID int, @OrderType varchar(50) ... When I search for ID = 163
Input string was not in a correct format.
Then when I check with the SQL Server Profiler, I found out that:
exec usp_SelectOrder@DropDownListValue=N'1',@ID=N'163',@OrderType=N'163',@OrderSeries=N'163' ...
I already set every parameter's default value to NULL. How can I solve for this? Thanks!!
View 1 Replies
View Related
Sep 18, 2007
Why on earth is this not working, It WILL insert if there are NO apostheres (" ' "), but if I say like, "Cedric's Group" It will error out. I thought this approach was suppose to handle this character?
Thanks for any insight, String sqlStr = "Insert into cardgroups (username,groupname,insertdt,groupid) values (@username,@groupname,@insertdt,@groupid)";
SqlCommand cmd = new SqlCommand(sqlStr, connect);
cmd.Parameters.AddWithValue("@username", Session["memberusername"].ToString());
cmd.Parameters.AddWithValue("@groupname",this.namebox.Text.ToString());
cmd.Parameters.AddWithValue("@insertdt", DateTime.Now.ToString());
cmd.Parameters.AddWithValue("@groupid", myGroupStr);
connect.Open();
cmd.ExecuteNonQuery();
connect.Close();
View 2 Replies
View Related
Nov 17, 2007
Imports System.Data.SqlClientImports System.DataImports Microsoft.SqlServerPartial Class _Default Inherits System.Web.UI.Page Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click End Sub Protected Sub TextBox3_TextChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles TextBox3.TextChanged End Sub Protected Sub SqlDataSource1_Selecting(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceSelectingEventArgs) Handles SqlDataSource1.Selecting End Sub Protected Sub Save_Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Save_Button1.Click Dim conn As New SqlConnection() conn.ConnectionString = Data Source=REDSTONE;Persist Security Info=True;User ID=******;Password=******;Unicode=True End SubEnd Class
End of statement expected. C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb
'System.Data' is a namespace and cannot be used as an expression. C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb
C:Documents and SettingskasireddyMy DocumentsVisual Studio 2005WebSitesBankCustomerInfo.aspx.vb
View 1 Replies
View Related
Mar 25, 2006
Hello to all,
On my webPage I have Used one SQLDataSource to access DataBase. Now whenever some error occures it shows error page by default. I am not able to catch Errors and tackle in my way...
Furthermore in this new structure of accessing DataBase even I do not know where to write Try... Catch...
View 1 Replies
View Related
Apr 30, 2002
Hi,
Well there's always a first for everything!! I have a SQL 7.0 server on sP1
and ran upgrade to sp3 and recieved error 'error in upgrade script' retry or cancel. When I retried the upgrade ended. I tried to run the upgrade again and it tries continue where it ended before, but the upgrade ends unsucessfully. I even tried extracted the sp3 exe to a diffrent folder and ran the sp3 upgrade with same results.
I started the MSSQL service ok but not able to use Query Analyzer, DTS, EM.
Get the following message:ISQL.EXE - Entry Point not found. The procedure entry point?DeleteRow@CDataCTLStorage@@UAEJJPAPAG@Z could not be located in the dynamic link library SQLGUI.dll
I get similar msgs when trying to open DTS, Enterprise manager from the server. The user databases and appear to be ok. I am able to get to Query Analyzer, etc. from my worksation fine.
Has anyone encountered this before? Is there a fix for it or do I need to rebuild the server from SP1 and restore the databases, etc.??
Thanks Much,
Steve Bajada
Senior DBA
View 3 Replies
View Related
May 29, 2002
It gives following errors
1.time out
2.general network failure
* Are these due to large number of online connnections
*If so what is the maximum number of connections possible
*what is the hardware requirement to avoid this
*what is the impact on stored procedures
*How to tune the server to overcome the problems
*I'm currently using the standard edition what is the impact on enterprise edition
View 1 Replies
View Related
