Triggering SSRS Report From Command Prompt

Dec 17, 2007



Hi,

We have requirement where we need to run the SSRS report from Command Prompt. We are using Control + M, which is a scheduler runs only from DOS prompt.

Can anyone help us to know the procedure of doing this.


Thanks
Karthik

View 1 Replies


ADVERTISEMENT

Using Prompt Parameter Into SSRS Report Based On Sql Query

Dec 12, 2007

Hi All,

I have a question regarding how to use report prompts in SSRS reports that are based on SQL queries.
When I added the prompt into the query for use as a filter value, it says that there is an error.
It does not recognise the '!' inside the parameter prompt string. Example is parameter!month_prompt.Value, which the ! is not recognised.

Your help is much appreciated.

Thanks & Regards,
Mohd Fadzli

View 1 Replies View Related

Reporting Services :: Extra Command Button To Print SSRS Report

Aug 8, 2015

I have created  web based  ssrs report with Report viewer  and I am trying to add Command button to print result of report reside in ReportViewer and I have worked with  code to generate. Is there any other way to work around without writing function or java script  on Extra print button to print  ssrs report.

using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;

[code]....

View 4 Replies View Related

Triggering A Report

May 22, 2007

Is there a way to trigger a report to run and the be stored as a snapshot? We have a Reporting Build process that stores aggregate values into a summary table, however this stored proc takes a couple of hours to run. What we would like is to have a report run immediately after the stored procedure is complete and then the reports be able to be viewed on-demand, but already run and stored in the Report Server



Not know much about the SQL part of it, is this possible?



Thanks for the information.

View 3 Replies View Related

Triggering Report Subscription

Dec 21, 2006

Is there a way to trigger a Subscription from DTS?

or is there a another way to do the following:

I have a Subscription that creates a pdf file on our server. I want to archive the existing file before I create the new one.

I was thinking of using a DTS package to copy the file then trigger the report.

But, I'm open to other solutions...Thanks in advance!!!

View 1 Replies View Related

Triggering A Report On Sql Statement

Aug 17, 2007

is it possible to trigger the sending of a report upon the results of a sqlstatement

i.e my statement brings back 10 different e-mails can i trigger a report to be sent to these e-mails.
next day my report brings back 5 different e-mails can i trigger a report to be sent to these e-mails and not the others


cheers for your help

View 11 Replies View Related

BCP Utility & Command Prompt

Dec 7, 2000

Can anyone tell me how to enable bcp utility. Because anytime I try to run BCP I get the following error messages: (BCP not enable). Also how can I get to SQL Server command prompt? I look forward to hearing from anyone.

View 2 Replies View Related

Running A DTS Job From Command Prompt

Oct 17, 2000

Sorry for the new thread.
How to run a DTS job from command prompt? Any help is appreciated!
Thanks.

View 1 Replies View Related

Start Job From The Command Prompt?

Feb 23, 2006

I have a Microsoft SQL server that is setup, and inside it is a job. Inside the job is a bunch of lines of transact sql statements.

I would like to be able to start the job from the command prompt. Moreover, I do not want to have to create new files or modify anything that is existing. I just want to be able to have it set up so that a new user who installs the server and all of the job on their machine fresh, can just punch in the command to run the job.

I know I can copy the transact sql statements from the job, and run them through the command prompt, but that would be a poor way to do it, because if the statements in the job were ever modified, with this task being automated, the command prompt statements would be out of date.

So I just need a way to start the existing job from the command prompt. Is this possible? Maybe with OSQL?

View 4 Replies View Related

Sql Install From Command Prompt

Jun 18, 2008

Please let me know how to install sql server by using command prompt.

View 4 Replies View Related

BCP Problem Using Command Prompt

Mar 26, 2008

I am have trouble configuring developer edition when trying to run a Bulk Copy through Command Prompt. I have configured remote connections within the surface area configuration and have created a firewall exception

I enter and run

bcp FileImportDB..Exam in "c:FileImportPracticeExamImportFile.txt" -T -c

then i get the following error message

Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:UsersDineen>bcp FileImportDB.Exam in "c:FileImportPracticeExamImportFile.t
xt" -T -c
SQLState = 08001, NativeError = 2
Error = [Microsoft][SQL Native Client]Named Pipes Provider: Could not open a connection to SQL Server [2].
SQLState = HYT00, NativeError = 0
Error = [Microsoft][SQL Native Client]Login timeout expired
SQLState = 08001, NativeError = 2
Error = [Microsoft][SQL Native Client]An error has occurred while establishing a
connection to the server. When connecting to SQL Server 2005, this failure may
be caused by the fact that under the default settings SQL Server does not allow remote connections.

I am running developer edition on vista and Service pack 2, iam connecting to my instance with no problem.

Can someone please help

Kind regards

Rob

View 6 Replies View Related

Running SQL Scripts From Command Prompt

Jul 25, 2006

I have a requirment, when a user logs in to the pc, I want to run some SQL scripts which is been saved as a stored procedure on another pc. Could this be possible. I know in oracle you could do it using SQLLDR. Is there any way to do it in SQL?
Please advice. Any help is greatly appreciated.

View 3 Replies View Related

Backing Up Database From Command Prompt

Sep 13, 2000

Is there a way by which we can execute the backing up of database from the command prompt......

Suppose i need to do the below task. I can write a stored procedure and schedule it. But the situation demands to run from the command prompt. Is there a way out.


-- Create the backup device for the full MyNwind backup.

USE master

EXEC sp_addumpdevice 'disk', 'MyNwind_2', 'c:mssql7ackupMyNwind_2.dat'

-- Back up the full MyNwind database.

BACKUP DATABASE MyNwind TO MyNwind_2


-Rajesh

View 2 Replies View Related

Running Sp From The Command Prompt (of Another Server)

Jan 23, 2001

I have created linked servers and successfully run the following stored procedure.

exec [db-2001server].sales..sp_test

Can anyone give me the exact syntax for running the same from command promt(without using the query analyzer).I am new to isql/osql.So,please help me with the syntax.
Thanks!!

View 1 Replies View Related

How To Import Database In Command Prompt?

Jan 7, 2001

How to import database in command prompt?

View 1 Replies View Related

Sql Srvr 6.5 Only Runs From Command Prompt

Oct 11, 1999

We have a development server that will only run SQL Server from a DOS command prompt. Each time I reboot the server the services don't autostart, and I am unable to start them manually using Service Manager. Does anyone know what I can do to fix this problem?
Thanks

View 1 Replies View Related

Problem In Using Sqlmaint In Command Prompt

Feb 13, 2004

Hi,

I try to backup DB (DatabaseA) in ServerA using sqlmaint utility in command prompt.

The sqlmaint.exe does reside in ..MssqlBinn Folder.

Below is the command i used (MS-DOS):
..Binn>sqlmaint -S ServerA -U "sa" -P "########" -D DatabaseA
-BkUpDB C:Temp -HtmlRpt BackupRpt.html

When I execute the command, it only shows a list of the commands as if I execute -? command. There's NO any other messages that indicate the backup command is being executed.

When I check in the C:Temp folder, there's no BackupRpt.html file.

Anyone got any idea?

Thanks.

View 5 Replies View Related

Command Prompt Output Capture?

Jun 25, 2014

How can i get the output (like 1 rows(s) inserted)in a file from an input file through sql command prompt.

View 1 Replies View Related

Execute Sql Commands Through Command Prompt

Nov 15, 2007

Hi,

I wanted to know if there is a way to execute sql commands on the operating system's command line. If it is possible, then how do we do it ? For example to execute a SELECT * from Table statement what are we supposed to do ?

Thanks
S

View 2 Replies View Related

Help! SQLEXPRESS Command Prompt Installation!

Aug 8, 2007



i have a problem installing SQLEXPRESS via command prompt... the installation is successful but the 'sa' account could not login to the server.. here's the command in my batch file.





Code SnippetStart /wait <exe> /qb INSTANCENAME=MYINSTANCE ADDLOCAL=ALL *AUTOSTART=1 RSCONFIGURATION=DEFAULT SECURITYMODE=SQL SAPWD=sapwd SQLCOLLATION=Latin1_General_BIN requiresmsiengine=1




and one more thing, i need to run the report server automatically.. thanks!

View 2 Replies View Related

Using The Command Prompt Via SQL Server Agent

Jun 4, 2007

I need to verify a csv file exists before I call a stored procedure to complete a bulk insert. The first step in the SP will be to verify the file exists (that particular "Job" step did not fail). I have only one step in the job that I have set the type as "Operating System (CmdExec)" and the Command is "Dir C:NAFCDMDataShipmentsCooperShipments.csv". When I execute the job manually to verify the proper operation I receive the error listed below. I know the path and file name are correct as I originally typed in the UNC, when it failed I copied it from the Address bar. I attempted to move the file to the root location without success. I attempted to use another file. I have attempted to rename the file. The DBAs will not allow me to use the SP_cmdshell stored procedure (that was my first thought).

I added 'Everyone' with Full Access to the root folder and propagated these permissions to all containing folders. This again did not allow the job to run. I changed the statment to "REN C:NAFCDMShipmentsShipment.csv Shipment1.csv". I continue to get the same error. Can someone Please point me in a direction to fix this problem?



"The process could not be created for step 1 of job 0x71D51027F920A140A2913234DB7FF509

(reason: The system cannot find the file specified). The step failed.

The job failed. The Job was invoked by User sa. The last step to run was step 1 (Verify the File's Existance)."

View 1 Replies View Related

MSDE Installation Stops In Command Prompt

Aug 14, 2005

Hi,I am trying to install MSDE from a CD. At the beginning I cunpack all files at C:sql2ksp3. Then in in Command promptI enter          C:sql2ksp3MSDE> Setup SAPWD=Hello SecurityMode=SQL The problem is that nothing happens after that. When I press enter another line appears             C:sql2ksp3MSDE>but that's about it.The installation does not continue. Does anybody know how to "push" it a bit so it will continue?Thanks

View 1 Replies View Related

Unable To Run Command Prompt SQL Utility From SQL Agent

Mar 20, 2003

I am unable to execute DTS packages,ISQLs when scheduled from SQL Server Agent . It dispalys a Dr.Watson Access Voilation message on the box .The result of the job is "failed as the step did not return any result ".

1)The utilities run fine when run from clients from other computers .


2)They fail again when run thru the command prompt of the box .

3)They suceed when run via the xp_cmdshell .

Can anybody help me out ?

Thanks,
Venkat

View 7 Replies View Related

Calling SSIS Package Through Command Prompt

Feb 24, 2008

All, I am developing the data mart refresh task in SSIS. I wanted to call the package in command prompt. I need help. Can any one give any tips on it. Thanks and appricate in advance.

Regards
Govind

View 2 Replies View Related

SQL Server Agent Accessing The Command Prompt

Jun 4, 2007

I need to verify a csv file exists before I call a stored procedure to complete a bulk insert. The first step in the SP will be to verify the file exists (that particular "Job" step did not fail). I have only one step in the job that I have set the type as "Operating System (CmdExec)" and the Command is "Dir C:NAFCDMDataShipmentsCooperShipments.csv". When I execute the job manually to verify the proper operation I receive the error listed below. I know the path and file name are correct as I originally typed in the UNC, when it failed I copied it from the Address bar. I attempted to move the file to the root location without success. I attempted to use another file. I have attempted to rename the file. The DBAs will not allow me to use the SP_cmdshell stored procedure (that was my first thought).

I added 'Everyone' with Full Access to the root folder and propagated these permissions to all containing folders. This again did not allow the job to run. I changed the statment to "REN C:NAFCDMShipmentsShipment.csv Shipment1.csv". I continue to get the same error. Can someone Please point me in a direction to fix this problem?



"The process could not be created for step 1 of job 0x71D51027F920A140A2913234DB7FF509

(reason: The system cannot find the file specified). The step failed.

The job failed. The Job was invoked by User sa. The last step to run was step 1 (Verify the File's Existance)."

View 3 Replies View Related

Installing SQL Express And Attaching A Mdf Db From The Command Prompt

Mar 21, 2007

Hi,

I need to install a customed SQL server express instance on the client's computer by using the Command prompt installation. I've already defined the security settings and everything i need but i was wondering if is possible to attach a mdf database during the installation. Perhaps there is a paramenter i can include in the in the ini file.

Thank you

View 6 Replies View Related

Login To SQL Server Express Using Command Prompt

Jun 30, 2006

How can I login to SQL Server Express instance(localhostSqlExpress) using command prompt so that I can query database. Is there any alternative GUI tool for SQL Server Express Manager? (I think Microsoft has discontinued SQL Server Express Manager). I prefer using Command Prompt. I am using WindowsXP Professional.

View 8 Replies View Related

How Can I Connect To Sql Sever 2005 Express From The Command Prompt.

Apr 24, 2007

Iam trying to connect to local copy of sql sever express from the command prompt with this command(sqlcmd)  but i get the error below. What should i do to overcome the error. Basically what i want to do is to try out some commandline backup utilities and i deadly want to know how to do a backup from the command prompt. Help is greatly appreciated.
HResult 0x2, level 16, state 1
Named pipes provider: could not open a connection to sql sever [2]
sqlcmd: Error: Microsft sql native client: An error has occurred while estarblishing a connection to the sever. When connecting to sql sever 2005, this failure may be caused by the fact that under the default settings SQL sever does not allow remote connections..
Sqlcmd: Error:  Microsoft sql native client: Login time out expired.

View 3 Replies View Related

Errors While Running Ssis Packages From The Command Prompt.

Dec 23, 2005

I have created ssis package. It has been successfully running at UI level.

But when i am trying to execute it from the command prompt by using dtexec utility it is showing the following error messages.

Error: 2005-12-23 17:01:57.67
   Code: 0xC00470FE
   Source: Data Flow Task DTS.Pipeline
   Description: The product level is insufficient for component "Flat File Source" (1).
End Error
Error: 2005-12-23 17:01:57.67
   Code: 0xC00470FE
   Source: Data Flow Task DTS.Pipeline
   Description: The product level is insufficient for component "Script Component" (9).
End Error


i have entered the command as follows.

dtexec /f "c:somefolderpackage1.dtsx"

 

Any points regarding this issue would be helpful.

 

View 7 Replies View Related

Package Runs From Command Prompt, But Wouldn't From The Agent

Sep 20, 2007

A strange thing is happening to us: we create a bat file that executes an SSIS package with multiple connection managers and tasks.

When calling the bat file from command prompt €“ the package runs just fine!

When calling the same bat file from SQL Server Agent (that runs under the same NT account as SSIS, and all other SQL services, and belongs to local Adminstrators), the package fails half way through with connection failed issue.

Plus it gives us something like this: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER

Has anyone ever experienced this issue, do you have any possible solutions?

Thank you!
Anastasia

View 4 Replies View Related

Setting Service Account To LocalSystem Via Command Prompt

Dec 5, 2007



Hello,

I was wondering if there was any way to set the service account on sql server 2005 express to Local System via command prompt.

To giva some background to this issue, I am installing 2005 express via command prompt, however, the default service account is network I believe. However, when running this, I keep getting an "error 3415" whenever I try to attach a database, which states that the files are "read only", which they are not. However, when setting the service account to local or set the security mode to windows authenticaiton, I can attach just fine.

The parameters I use to install are pretty standard:


"/qb ADDLOCAL=ALL INSTANCENAME=<name>SAPWD=<pwrd> SECURITYMODE=SQL DISABLENETWORKPROTOCOLS=0 SQLAUTOSTART=1"

So I was wondering if there was some way to set the service account to local system to local using some command prompt parameter. OR if there was another way around the error 3415 that will enable me to attach a database, that I do not know about that I can use, preferrably via command prompt, but anything will be fine at this point.

Thank you all in advance.

View 6 Replies View Related

SQL Server Express Edition Silently At Command Prompt

Sep 26, 2006

I want to install the SQL Server Express Edition silently at command prompt (but want the dialog boxes, I mean with /qb option), locally, with no network options.

I want to install it with following options

i) In the Feature Selection, I need
a) Data file (Database Services)
b) Shared tools (Database Services)
c) Connectivity Components (Client Components)
d) Management Studio Express (Client Components)
ii) Instance name as €œDefault Instance€?
iii) Service Account as €œUse Built-in service accountà Local System€?
iv) Authentication Mode as €œMix mode€? with sa password as €˜sysadm€™
v) Collate Settings as €œLatin1_General_CS_AI

How could I achieve this using command prompt?

I already had done

start /wait setup.exe /qb ADDLOCAL=ALL SECURITYMODE=SQL SAPWD=sysadm SQLCOLLATION=Latin1_General_CS_AI

any other attribute need to add?

Regards,
Thanks.
Gurpreet S. Gill

View 10 Replies View Related

SQLCMD Command Prompt Window Not Functioning Properly

Sep 15, 2007

The MSDN Library topic Using the sqlcmd utility(SQL Server Express) states "To access the sqlcmd utility, click Start, click Run, and type sqlcmd.exe."

A command prompt window opens with "SQLCMD" in the title bar. I cannot enter anything in the command prompt window and the window remains open for only about five or six seconds.

The version I have installed is MS SQL Server 2005 Express with SP2. The cumulative updates package 3 does not list this problem, so I did not install it.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved