I'm trying to add a CASE to my statement, I keep getting a syntax error. Can anyone see the issue? Should this CASE work?
Thanks for your thoughts,
Select tmp.Alternate_Name,dbo.tblClient.Salutation
CASE
WHEN (tmp.Alternate_Name > '') Then tmp.Alternate_Name As Card_Name
Else dbo.tblClient.Salutation AS Card_Name END
From dbo.tblClient INNER JOIN dbo.tblCards tmp ON dbo.tblClient.ClientID = tmp.ClientID
Hello,
we have automated build on every night. In our solution is SSIS project, where each package is encrypted per password. We call build process per command line like this..
C:ProgrammeMicrosoft Visual Studio 8Common7IDEdevenv.exe (c:DevelopmentX3\X3.sln /build Release)' in 'c:DevelopmentProjectsDailyBuild
Through build process we get a error:
External Program Failed: C:ProgrammeMicrosoft Visual Studio 8Common7IDEdevenv.exe (return code was 1):
We think a reason is, that on build of SSIS project must be entered a password. You can wonder for what we need that SSIS packages are part of our build. We hope that on build process is also created Deployment Utility, if so set in dtproject.user. Is it so? Is there any way to create Deployment utility on automated build process? Can be a password provided pre command line?
with best regards
Anton Kalcik
How can I change my T-SQL text editor from text sensitive to text insensitive?
View 2 Replies View RelatedHello:
I have created an SQL server table in the past on a server that was all case sensative. Over time I found out that switching to a server that is not case sensative still caused my data to become case sensative. I read an article that said you should rebuild your master database then re-create your tables. So after rebuilding the master database, a basic restore would not be sufficient? I would have to go and manually re-create every single table again?
Any suggestions?
Can someone point me to a tutorial on how to search against a SQL Server 2000 using a case insensitive search when SQL Server 2000 is a case sensitive installation?
thanks in advance.
We need to install CI database on CS server, and there are some issueswith stored procedures.Database works and have CI collation (Polish_CI_AS). Server hascoresponding CS collation (Polish_CS_AS). Most queries and proceduresworks but some does not :-(We have table Customer which contains field CustomerID.Query "SELECT CUSTOMERID FROM CUSTOMER" works OK regardless ofcharacter case (we have table Customer not CUSTOMER)Following TSQL generate error message that must declare variable @id(in lowercase)DECLARE @ID INT (here @ID in uppercase)SELECT @id=CustomerID FROM Customer WHERE .... (here @id in lowercase)I know @ID is not equal to @id in CS, but database is CI and tablenames Customer and CUSTOMER both works. This does not work forvariables.I suppose it is tempdb collation problem (CS like a server collationis). I tried a property "Identifier Case Sensitivity" for myconnection, but it is read only and have value 8 (Mixed) by default -this is OK I think.DO I MISS SOMETHING ????
View 4 Replies View RelatedI am working in a SQL server database that is configured to be case-insensetive but I would like to override that for a specific query. How can I make my query case-sensitive with respect to comparison operations?
Jacob
I have column with value of all upper case, for example, FIELD SERVICE, is there anyway, I can convert into Field Service?
View 7 Replies View RelatedI am curious with using replication in sql server 2005 one way from db A (source) replicating to db B(destination) in which db A has a collation of CS and db B has a collation of CI. Will there be any problems with this scenario? Thanks in advance!
View 2 Replies View RelatedI have a view where I'm using a series of conditions within a CASE statement to determine a numeric shipment status for a given row. In addition, I need to bring back the corresponding status text for that shipment status code.
Previously, I had been duplicating the CASE logic for both columns, like so:
Code Block...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE
[logic for condition 1]
THEN 'Condition 1 text'
WHEN [logic for condition 2]
THEN 'Condition 2 text'
WHEN [logic for condition 3]
THEN 'Condition 3 text'
WHEN [logic for condition 4]
THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This works, but the logic for each of the case conditions is rather long. I'd like to move away from this for easier code management, plus I imagine that this isn't the best performance-wise.
This is what I'd like to do:
Code Block
...beginning of SQL view...
shipment_status =
CASE
[logic for condition 1]
THEN 1
WHEN [logic for condition 2]
THEN 2
WHEN [logic for condition 3]
THEN 3
WHEN [logic for condition 4]
THEN 4
ELSE 0
END,
shipment_status_text =
CASE shipment_status
WHEN 1 THEN 'Condition 1 text'
WHEN 2 THEN 'Condition 2 text'
WHEN 3 THEN 'Condition 3 text'
WHEN 4 THEN 'Condition 4 text'
ELSE 'Error'
END,
...remainder of SQL view...
This runs as a query, however all of the rows now should "Error" as the value for shipment_status_text.
Is what I'm trying to do even currently possible in T-SQL? If not, do you have any other suggestions for how I can accomplish the same result?
Thanks,
Jason
I am working on a C#/asp.net web application. The application has a text box that allows a user to enter a name. The name is then saved to the database.
Before the name is saved to the database, I need to be able to check if the name already exists in the database. The problem here is that what if the name is in the database as "JoE ScMedLap" and somoene enters the name as "Joe Schmedlap" which already exists in the database,but just differs in case.
In other words how do deal with case sensitiviy issues.
Yesterday I received a response to my CI/CS Collation problem and therecommendation was to try and restore a CI Collation database to a CSCollation database. After creating a blank CS database a full restore(Force restore over existing database) does change the Collation toCI. I'm unsure as to how I can restore without changing theCollation. Any suggestions?
View 2 Replies View RelatedHey folks, I just inherited a machine where select @@version returns this:
Microsoft SQL Server 7.00 - 7.00.710 (Intel X86)
Okay, I know that:
623 is orig sql
699 is sp 1
842 is sp 2
961 is sp 3 -- but what's 710 ?
going to http://search.support.microsoft.com/kb/c.asp?ln=en-us gets me exactly 0 <zero> hits. Is this a hotfix someone's aware of?
Any thoughts/documentation/whatever would be appreciated.
Thanks,
Tom
I know how to use sql to write a block of sql statements by cutting and pasting the results in to the execution window. Now my question is this...
is there a way to create the sql and execute the results. i.e. Automatically cut and paste the results into the execution window and run it??
Something to munch on if your bored. Ideas appreciated.
The common way that we use to delpoy reports in production server is using rsbuild.config file and running the command to execute it. Is this a Microsoft product ? does it have any licensing issue if i need to use this approach in my production environment to deploy the reports?
View 1 Replies View RelatedHi,
I have two tables called Actcodes and a another table called FundBalances...
The Act codes have the following format..
PlanId int,
ClientId int,
StartDate datetime,
EndDate datetime,
ClientActCode char(2)
CodeDescription char(15)
so based on what the user has selected i am getting the names of each codes
and they have the following Rows.
PlanId ClientId Startdate EndDate ClientActCode CodeDescription
111 1 1/1/2008 3/31/2008 01 Begininng balance
111 1 1/1/2008 3/31/2008 02 Contributions
111 1 1/1/2008 3/31/2008 03 something
111 1 1/1/2008 3/31/2008 04 sdkfjdkf
111 1 1/1/2008 3/31/2008 05 dfdfd
111 1 1/1/2008 3/31/2008 06 dfddfs
111 1 1/1/2008 3/31/2008 09 dfdf
111 1 1/1/2008 3/31/2008 15 dfdkfdlfk
and my fund balance i have the following rows..
PlanId int
Participantid int
StartDAte datetime,
end date datetime,
FundId int
Loans
Act1 char(2)
TotAct1 money
.
Act20 char(2)
TotAct20 money
and the data is as follows
PlanId ParticipantId StartDate EndDate fundId Loans Act1 TotAct1 Act2 totact2 ----- Act20 TotAct20
111 1212 1/1/2008 3/31/2008 15 NULL 01 15.15 02 15.48 20 12.4561
111 1212 1/1/2008 3/31/2008 45 0 01 45.12 02 453.123 20 54.00
so on and so so forth
tht Act1 matches the ClientActCode in the Act..
So is there a way i can get those column in my select which have actCodes present in the Act code table. for in... in my act code table for this plan i have 01,02,03,04,05,06, 09, 15 clientAct codes
so can i get the its respective Acts and Totacts column as Act1, Act, Act3, Act Act5, Act6 based on the ClientAct codes.
Any help will be appreciated..
Thanks
Karen
Hi.
I know this querry:
"SELECT TOP 10 * FROM MyTable ORDERBY ..."
will give the top 10 rows.
But how can I build a querry that can get the rows from 40-50 (ie).
Thanks.
Hi,
Please Help me to build this query.
I have got a "User" Table
---------------------
UserID UserName
---------------------
1 Tuffy
Another Table "Groups" Table
---------------------
GroupID GroupName
---------------------
1 Manager
2 Employee
3 Sales
I have got a "UserGroup" Table HOLDING ID'S as Foreign key.
The data in the TABLE is like this
---------------------
UserID GroupID
---------------------
1 1(Manager from "Group" Table
1 2(Employee)
1 3(Sales)
2 2(Employee)
2 3(Sales)
---------------------
Now when a user logged in The Groups have to be returned as a string that contains pipe separated Group names
for example "Manager|Employee|Sales|"
So if User 1 log in I need something like that
UserID (1)-->"Manager|Employee|Sales|"
Please help me how to write this query.
Regards
Hi there, I have 3 columns that contain the same kind of information and I would like to do a select that would return all the distinct records of all 3 colums. Any help woulb be appreciated.
Thanks
I have two tables linked with the colunm name systemId and I need to get all the systems responding to the condition (t1.software & 0000000001) = 1 and if they have any contacts I would like to see them.
Here is what I have for the moment however my querry do not return the system info if no contact exist and that is wrong.
select customers.customerId,customers.systemId,customers.country
from customers,contacts
where (customers.software & 0000000001) = 1
and customers.SystemId = contacts.SystemId
order by customerid
Systems
-SystemId
-CustomerId
-Name
...
Contacts
-ContactId
-SystemId
-Name
-Tel
...
please help me
i need for example
when my user clicke in the button a new table build in my sql database
please help me
Anyone know the final build # for the RTM version?
Thanks
I swear I saw a stored procedure that would tell me what version service pack and what build my sql servers are...
Does anybody know how to find out? I think its a transact query...
Also, I think I saw a stored procedure that would associate that cryptic string of numbers into text; ex: "SQL 6.5, Service Pack 5"
l would like to intergrate the the two procedures listed below into one procedure or function.
l'm doing it in two steps.This report will have each loan listed and a final line summed on each of the amounts?
enddate and startdate being my parameters and print the results to screen.And l'm failing to do that thats why its in two steps.Hope this makes it clear enough.
-- Exec New '2001-04-01 00:00:00.000','2002-05-29 23:59:59.000'
-- Exec New1 '2001-04-01 00:00:00.000','2002-05-29 23:59:59.000'
Alter procedure new (@startdate datetime,@enddate datetime)
as
begin
SELECT Distinct
Loan_no AS Loan_no,
Date_Issued AS Date_Issued,
Store AS Store,
Product AS Product,
Capital_Amount AS Capital_Amount,
Interest_Amount AS Interest_Amount,
Total_Amount AS Total_Amount,
Insurance_amount As Insurance_Amount,
Admin_Fee AS Admin_Fee,
User_Issued AS User_Issued,
LoanBook AS Company,
Status
FROM Loan
Where Date_Issued BETWEEN '2001-04-01 00:00:00.000' And '2002-05-29 23:59:59.000'
End
Alter procedure new1(@startdate datetime,@enddate datetime)
As
Begin
SELECT
Sum(Capital_Amount) AS Capital_Amount,
Sum(Interest_Amount) AS Interest_Amount,
Sum(Total_Amount) AS Total_Amount,
Sum(Insurance_amount) As Insurance_Amount,
Sum(Admin_Fee) AS Admin_Fee
FROM Loan
Where Date_Issued BETWEEN '2001-04-01 00:00:00.000' And '2002-05-29 23:59:59.000'
End
Whats the quickest way of building a calender split by day,month,year,day name of week. l want populate the table with that information.
View 1 Replies View RelatedThe Accounting Department needed some reports, and this was back when I was first learning SQL, so I wrote a batch file that used osql to run a procedure. This procedure created a second batch file with several hundred lines to run another stored procedure and output to .rpt files complete with page breaks.
Now I'm revisiting this process having learned alot since then, and would like some input on how to handle this better. The batch file works, but I've never been one of those "if it's not broke" type of people. I'm one of those "If it's not broke, give me 5 minutes and it will be" kind of people
I'm specifically interested in something to replace this CURSOR that builds the batch file:
Code:
DECLARE @Dealer Varchar(20)
DECLARE Dealer_Cursor CURSOR
FOR SELECT Dealer_id FROM Dealer WHERE (Dealer_id != '-1') AND (isnull(Category,'-1') != 'NOBILLING')
OPEN Dealer_Cursor
FETCH NEXT FROM Dealer_Cursor INTO @Dealer
WHILE @@Fetch_Status = 0
BEGIN
/* @Folder is passed as a fully qualified path to the billing folder */
/* Logging and Command Window Notification, to be placed into DealerBilling.bat */
PRINT 'ECHO Creating report for Dealer: ' + @Dealer + ' ...'
PRINT 'ECHO Creating report for Dealer: ' + @Dealer + ' ... >> "' + Substring(@Folder,1,3) + 'Reportlog.txt"'
PRINT '"osql" -SMYSERVER -UMYUSER -PMYPASS -w 103 -Q "EXEC MYSERVER.MYDB.dbo.Proc_Dealer_Listing '''
+ @Dealer + '''" -o "' + @Folder + '' + @Dealer + '.rpt"'
FETCH NEXT FROM Dealer_Cursor INTO @Dealer
END
PRINT ' '
CLOSE Dealer_Cursor
DEALLOCATE Dealer_Cursor
I have a table with 2 columns:
Col1 Col2
stat1,stat2 AV,AD
stat3 TD
I need to build a query like this:
SELECT *
FROM table3
WHERE stat1=AV and stat2=AD and stat3=TD
How do I do this?
I have a stored procedure which expects one parameter @City
Let’s say @City holds pipe delimited value: "New York|London|Paris"
In my stored procedure I need to replace all pipes with OR operator? In other words my select statement needs to look like this :
SELECT * FROM City WHERE CityName= 'New York' OR CityName= 'London' OR CityName= 'Paris'
Thank you
Here is my problem.
I need to build a new SQL query and im almost new with all the sql language. Im searching a lot and I have 2 book but I cant found what I'm looking for.
I need to update the Site and Department in the table 1 with the site/department in the table 3 using the table 2 as a join. The table one is an item owned by the person in the table 3 and I need to set the Site and Department as the same.
Table 1
Asset Name | InstanceID | Site | Department
Table 2
InstanceID | User Name |
Table 3
User Name | Site | Department
Help will be really appreciated!
Thanks
I need to build following query:
Each item has one or more manufacturers:
Is any way to get all the items with all manufacturers where one of manufacturers fit required expression.
I will try to explain in example:
items | manufacturers
------------------------------
ABC1 | golf
ABC1 | toyota
ABC1 | citroen
ABC2 | skoda
ABC2 | subaru
ABC2 | lada
ABC3 | peugeot
ABC3 | renault
ABC3 | dodge
Example for Input: *olf*
Output:
ABC1 | golf
ABC1 | toyota
ABC1 | citroen
Example for Input: *aul*
Output:
ABC3 | peugeot
ABC3 | renault
ABC3 | dodge
Thanks
I would like to build a workflow system where 100 processes are requesting an item from a ~1.000.000 items large DB, process that item and move it to the next state. The problem with the current implementation I tried is that I get deadlocks....
The DB table looks like:
CREATE TABLE Transactions(
itemid CHAR(32),
status TINYINT not null default 0,
result INT not null default 0,
lockby TINYINT not null default 0,
.... (etc.)
PRIMARY KEY(refno)
);
CREATE INDEX IxStatus on transactions (status)
Each process (with his own ID) is doing 4 step:
1) update transactions set status=1, lockby=<ID> from
(select top 1 itemid from transactions where status=0) as t1
where t1.itemid=transactions.itemid
2) select itemid from transactions where status=1 and lockby=<ID>
3) process item
4) update transactions set status=2,result=<RESULT> where itemid=<ITEMID>
Does anyone has a suggestion on how to do this?
HI,
I have developed one application in sql server 2005.
Once i generate the scripts for all the objects, i want to give them to the client as a build.
so that he can execute that build by giving parametres like server name,error log path,build source path and db name.
Please let me know how to create that.
Please do the needful.
Hello all. I have an .xsd file and a .xml file that goes with it. Are there any tools available that will build a database structure in SQL Server from either of these two files? I can't see the .xml file being of much use for building the structure, but how about the .xsd file?
View 5 Replies View Related