The only way the job success is if I select the option add rows wich is copying all rows even the ones that are already there, I tried to drop amd recreate the table option but i just dosn't run that way, help please..
View 1 RepliesI have different versions of essentially the same database on two different computers. From Computer B I need to copy one table AND its data to Computer A.
I've read several articles and have tried several things but can't figure out how to do it. Incidentally, I'm running SQL Server Express 2005 on both machines.
Robert Werner
Vancouver, BC
In my requirement,My production server running more then 5 jobs . I want details in running schedule in minutes. For example
1) First Job
I am configured every one hour.
2) Second job
Configured in every 30 min
3) Third job
Configured every 60 min
4) Fourth Job
Configured every 24 hrs
I want the result
SNOJOBNameRunning Schedule(in Min)
1First JOB 60min
2Second JOB 30 min
3Third JOB 60min
4Fourth JOB 1440min
hi,
I created a SSIS package. It imports data from a flat file and then transfer to different data types and load it into destination table. I use look up transformation. Actually before I created final table, I created another intermediate data table for references.
Now I get a new source file once in a month. Then I'm supposed to connect new file and run the package. only difference in new source file is the data not data type. But when I connect the new flat file, package does not work. first one and fifth one are red when I run the package.
Can anyone help me to fix this?
Thanks
p/s;
I get the following error messages in execution result page.
[Lookup 5 [541]] Error: Row yielded no match during lookup.
[Lookup 5 [541]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "component "Lookup 5" (541)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Output" (543)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Lookup 5" (541) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited.
[Flat File Source [1]] Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
Hi all. i hope you can help me.
I´m exporting an ado recordset (SQL Server) to Excel from vb6.
This is what i´m doing but it only works on local server
********************************
Public Sub Export()
On Error GoTo Error
Dim strSheetName As String
Dim Conn As New ADODB.Connection
CDB.DialogTitle = "Exportar Datos"
CDB.Filter = "Archivos Excel (*.xls)|*.xls"
CDB.FileName = "Bitacora"
CDB.ShowSave
CDB.CancelError = True
If CDB.FileName = "" Then Exit Sub
If Conn.State = 1 Then Conn.Close
Conn.CursorLocation = adUseServer
Conn.Open "Provider=Microsoft.Jet.OLEDB.4.0;Data Source='" & CDB.FileName & "';Extended Properties=Excel 8.0;Persist Security Info=False"
strSheetName = "CREATE TABLE `Bitacora` (`IdUser` VarChar (3) ,`IdMenu` VarChar (20) ,`Fecha` DateTime ,`Referencia` VarChar (60) ,`Actividad` VarChar (120) ,`IP` VarChar (15) ,`HN` VarChar (15) )"
Conn.Execute strSheetName
If Conn.State = 1 Then Conn.Close
Conn.Open SisSession.SisConeccion
strSheetName = "insert into OPENROWSET('Microsoft.Jet.OLEDB.4.0', 'Excel 8.0;Database=" & CDB.FileName & "; HDR=YES', 'SELECT * FROM [Bitacora]') " & AdoData.Source & ""
Conn.Execute strSheetName
MsgBox "Datos Exportados en " & Chr(13) & CDB.FileName, vbOKOnly + vbInformation
Exit Sub
Error:
If Err.Number = 0 Then Exit Sub
ProcessError Err, Me.Name & " - Exportar", , , True
End Sub
*******************************************
Whe in configure the app for a network server it gives an error.
OLE/DB provider returned message: Microsoft Jet culd not find the object 'Bitacora'. Make sure the object exists and the route is ok.
This i assume is because the cange of the server from local to remote.
Can you help me with a solution?
I need to import data in several hunderd excell spreadsheets to a sql 2000 table. What function should I use? Do I need to create a table in sql with the same columns as the excell file and then run a query? Iam pretty new to sql, so please be gentle
View 4 Replies View Relatedi have data on a spreadsheet and i need to read it to a table in SQL server ? how can i do that ? some one refere to me a method for that but i need to see what other think is the best option and the most effecienet way let us say!!
View 4 Replies View RelatedI have requirement like to develop dynamic package for inserting data from flat file to table.
Find below points for more clarification :--
1) if I changed the flat file values and name in source variable AND  the table name should be also changed based on variable value .
2) it should dynamically mapped with column values with source file as we have to insert data in target table.
See below diagram for more clarification.
I have a table thats updated daily with monthly data totals:
Month, Total orders1, Total orders2, etc
12/01/2012, 5, 8, etc
11/01/2012, 6, 5, etc
How do I pull data from this table in SQL Server for ONLY the current month? I was thinking using the getdate() function to get the current month, but it doesn't match exactly so I get no results
i have a used database publishing wizard to create a sql fiel of a databse i wish to transfer to server running sql server management studio express on a server 2005 ,
what do i need to do to recreate my databse from the sql file.
many thanks
I have successfully created a SSIS package which execute a DTS 2000 package and with no problem to execute the task. But I failed to schedule this package. I was not success in setting the logging. When running the package in command line:
dtexec file "C:Documents and SettingslyangMy DocumentsVisual Studio 2005ProjectsTraingDTSTraingDTSDTSTraining.dtsx"
Error: 2008-03-24 08:03:24.36
Code: 0xC0012024
Source: Execute DTS 2000 Package Task
Description: The task "Execute DTS 2000 Package Task" cannot run on this edit
ion of Integration Services. It requires a higher level edition.
End Error
Warning: 2008-03-24 08:03:24.38
Code: 0x80019002
Source: DTSTraining
Description: The Execution method succeeded, but the number of errors raised
(2) reached the maximum allowed (1); resulting in failure. This occurs when the
number of errors reaches the number specified in MaximumErrorCount. Change the M
aximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Any help will be greatly appreciated.
(32 bit machine, standartd edition of SQL 2005)
which ALTER TABLE/ALTER COLUMN- Statement has a Recreate Table as result ?
View 2 Replies View RelatedI want to drop table and then recreate. It's referenced by many table and I dont want to drop all constraints referencing to it. Is there any feature like "switch off/on constraints" in MSSQL?(6.5)
View 1 Replies View RelatedI have a database around 500 GB. right now the database have only one data file and one log, it has only one filegroup also.all the indexes and table are placed in Primary Filegroup . we are going to separate them. the planing is to move all the indexes to Secondary filegroup and all the table will be in Primary filegroup.But there will be a problem while implementing it because there are around 600 tables and each table have at least 2 non-clustered index , so is there any way to move all the index to Secondary Filegroup.
View 3 Replies View RelatedI'm having a heck of a time trying to upload data to an excel spreadsheet. This works perfectly in sql 2000 but I've been having problems with 2005
SSIS package "Package1.dtsx" starting.
Error: 0xC002F210 at Drop table(s) SQL Task, Execute SQL Task: Executing the query "drop table `GRE`
" failed with the following error: "Table 'xxx' does not exist.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Drop table(s) SQL Task
Error: 0xC002F210 at Preparation SQL Task, Execute SQL Task: Executing the query "CREATE TABLE `xxx` (
`TEST_REC_NBR` Decimal(29,0),
`PROCESS_DT_GRE` LongText
)
" failed with the following error: "Invalid precision for decimal data type.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Preparation SQL Task
SSIS package "Package1.dtsx" finished: Failure.
I have an IS package containing approx. 10 tasks in the control flow - one of these tasks is a rather large data flow containing around 50 transformations plus 3 sources and two destinations. Around 10 of these are script components and another 10 are Union All transformations. The rest are primarily lookups, conditional splits and derived column transformation.
The XML file containing the package is approx. 4.5 MB. As I am developing the package, it is becoming increasingly slow to work with as more transformations are added to the data flow. Now, it takes 8 minutes every time I have to open the package for development (DelayValidation is even set to true) and DTExec (not the debugger) uses the same amount of time before it starts executing the package. It also takes a very long time to edit the data flow, as I typically have to wait 1-2 minutes every time the designer has to "commit" a change.
Does anyone have any idea what can be done to speed up the package - both with regard to development and execution?
I am trying to create and later read a data file from a package deployed in SSISDB, but it is not reading it while it is successfully creating the file. The same package when run from the file system package, runs successfully. Generating ispac and deploying in SSISDB is running for infinite time. Is it a permission issue?
View 7 Replies View RelatedI have an SSIS package that when run from Visual Studio takes 1 minute or less to complete. When I schedule this package to run as a SQL Server job it takes 5+ and sometimes hangs complaining about buffers.
The server is a 4 way 3ghz Xeon (dual core) with 8GB ram and this was the only package running.
When I look in the log I see that the package is running and processing data, although very very very very very slowly.
Has anyone else experienced this?
Thanks for your help
Marcus
Hello All,
I experienced a weird error while deploying my SSIS package. After running the manifest file, i noticed that one of the configuration file's path was not updated in the dtsx file. My solution has 8 packages and almost every package has 2 configuration files. Except 1 file every other config file's path is being updated. Has anybody experieced such a problem?
Thank you in advance for your help
Sumesh
Help ... i'm lost
I have one custom dataflow component in assembly A with version 1.1.0.0 used in many packages.
The component is now in assembly A with version 1.2.0.0 but not changed.
There is aniway to have those packaged configured in order to automaticaly be upgrated to use the new version of the component?
I tried (in this order):
- set the property "UpdateObjects" to true on package (while version 1.1.0.0 was available in GAC) and saved package.
- unistalled the version 1.1.0.0 from GAC.
- tried to reopen package with "Reload and Upgrade" option.
NO SUCCESS
I know that can be an brute way to do it, meaning replace as text in xml ... but i try to find a solution not this stupid "workaround"
Many thanx for any suggestions!
Catalin
PS: Excuse my english.
Does anyone know what would cause my log file (.LDF) to grow at a rate of over 1MB per second and quickly fill up the hard drive? I could use a quick answer on this. My experience is in Oracle but I'm assuming you can set the maximum size for a log file for starters? Not sure why it would be growing at this rate anyway though. I could use some quick answers on this one. Thanks!
View 4 Replies View RelatedI have MS SQL installed on my workstation at work. I am trying to use DTS to export data from our local network that uses a Pervasive DB to our web server that is hosted with another company.
If I go in and manually execute the DTS package from my workstation, it send the data to the web server.
If I try to schedule the DTS Package to automatically send the data, it fails. SQL Server Agent is running on my workstation and on the web server.
Is what I am trying to do possible? What am I doing wrong?
Hi All
I'm having problems scheduling a DTS package.
The server is SQL 7 sp2 running on NT4 sp5. The only other twist is that it's at a remote site that I connect to via NT Dial-up.
When I choose the 'Schedule Package...' menu option I get the normal dialog to set frequency etc... but the job isn't created.
Any guidence at all would be most appreciated.
Thanks
Phill
Hello and thanks for reading my post...
I have a DTS package that I can execute manually all I want, no problem.
However, when I try to schedule the package to run as a job, it error when it tries to connect to my remote database, giving me comments about the ODBC driver (which is installed correctly).
My best guess is that when I run it manually, it running under my userid/password (NT authentication), but when it runs as a job, it is using the SQL Agent, which has a different level of authority somehow.
This may be a no-brainer, but I've looked at everything I know of.
Please help!
I have been tasked with creating a web interface that kicks off a DTS package. The problem is that the DTS package takes a long time to run and basically hangs the browser until the process is complete...not good, and bumping up the script timeout in IIS doesnt help either. What i need to be able to do is schedule the package to run immediately rather than just execute it. That way I should be able to regain control of the browser as soon as the job has been scheduled. Does anyone have any code samples on how to do this? Any feedback would be greatly appreciated.
Michael D. Nelson
Hey,
I created a DTS package on my SQL server (2005).
It copies my data to an excel-file.
How can I run this package every night?
Thanks
Lainkes
HalloI have a DTS Package which reads data from a Access Database andimports it to SQL Server. This package runs without error when it isexecuted trough Enterprise Manager.When I create a job with "Schedule Package" and then try to run thejob, it gives errors like this:Ausführt als Benutzer: SQL-S002MURSQL_Admin. ...db Das System kanndas angegebene Laufwerk nicht finden.DTSRun: Lädt... DTSRun: Führtaus... DTSRun OnStart: DTSStep_DTSCreateProcessTask_1 DTSRunOnError: DTSStep_DTSCreateProcessTask_1, Fehler = -2147220330(80040496) Fehlerzeichenfolge: CreateProcessTask'DTSTask_DTSCreateProcessTask_1': Prozess gab Code 1 zurück. Dieserstimmt nicht mit dem....That means the system cannot find the specified drive.SQL Server and SQL Server Agent are running as SQL_Admin, I am alsologged in as SQL_Admin when I run the package in Enterprise Manager.Thank you very much, if someone can give me a hint.HP
View 1 Replies View RelatedHi,
What is the best way to schedule a package to run every 30 minutes during the day. Would it be using SQL Agent Jobs? If so, what is the things I need to consider.
Thank you,
Aldo
I am trying to create a job to automatically execute a package. The package was created by use of the wizard. It€™s very simple€¦export a view to a flat file. If I run the package as is it generated the file. However when I create a job and try to run the job it errors out with package cannot be found even though the path of the dtsx file is correct.
Shouldn€™t I be able to schedule a package which was created by the wizard? Do you have any idea when I€™d get a msg that package cannot be found even though the path is correct?
Please let me know your thoughts on this issue€¦I am at a lost.
Thanks,
Nats
My table as data as follow,
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[table_Data]') AND type in (N'U'))
DROP TABLE [dbo].[table_Data]
GO
/****** Object: Table [dbo].[table_Data] Script Date: 04/21/2015 22:07:49 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[table_Data]') AND type in (N'U'))
[code].....
Hi experts...
I'm trying to schedule a DTS package (import some tables from Mysql database) but there is
an error and I don't know how to resolve it.
The error is always the same...
"The job failed. The Job was invoked by Schedule 24 (Import RT data). The last step to run was step 1 (Import RT data)."
I have tried changing the all the parameters in the job properties, but I always obtein the same message.
The DTS package works fine, I can execute and it works, the problem is the schedule...
Thanks in advanced...
I'm new to DTS packages and have a problem with some new ones that have been set up and wondered if anyone else has experienced the same problem I am having.
A couple of DTS packages will run ok if I manually execute them but if I schedule them they fail. Any ideas would be appreciated.
Many Thanks
I have set up a couple of DTS local packages to run ActiveX scripts creating XML files and copying them to our webserver (on the same domain).
I can run them OK manually via the 'Execute' package command in the drop down list when I right click on them and also get the 'Package successfully run' message back on running them, but when I schedule them to run overnight I find the SQL Server Agent reports them as 'failed' although other packages set up seem to be running OK when scheduled.
What am I doing wrong?