Trying To Set Up SS 5 Express For Remote Connections
May 9, 2008
I am running a standalone WinXP SP2 system with VS 8 and SS 5 Express on it. I have been working very nicely with VB and SSCE, but I want to learn to use Sql Server 5 Express, which I also have on my system from a prior install of VS 5. I am strictly doing this as a learning experience on my own.
I have been trying to install the NW sample database into SS 5 Ex, but it is obviously not configured properly, because I am getting errors stating that the scripts cannot install because they cannot establish a remote connection to SS. So I looked up the FAQ item here on setting up for remote connections (which I am not even sure applies for a standalone system like mine). Anyway, I followed the instructions in the FAQ, using the SAC util to configure for remote connections, but it does not work. Every time I try to start the DB engine, it fails with the following message:
When trying to start Database Engine when configuiriung for remote connections in SAC:
"TITLE: Surface Area Configuration
------------------------------
The service did not respond to the start or control request in a timely fashion, you need
administrator privileges to be able to start/stop this service. (SQLSAC)
Now, I am the admin user on the PC but OK, so I selected the SAC option to set myself as SSadmin, even though this option is supposedly only for Vista users according to the dialog. Anyway, it does not allow me to set myself as SSAdmin, it returns the following error:
When trying to add myself to SQLSAC, even though it is for Vista:
"TITLE: .Net SqlClient Data Provider
------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL
Server 2005, this failure may be caused by the fact that under the default settings SQL Server
does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open
a connection to SQL Server)
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtI
D=2&LinkId=20476"
(which help link is no help BTW, because it is not valid). And the setting does not get set, because the next time I open that dialog, I am back to being a non-admin user.
So what is the solution here? Am I going to be able to use SS 5 Ex on my PC? No matter which connection option I select, either local only, or for any of the remote options, I cannot get it to work. Am I supposed to reboot my PC after changing a setting? Or is it just not possible to run SS 5 Ex on a standalone PC like mine?
Or worse, are there a bunch of other configuration settings I must change as well? I note that, when I look in the SS Config Manager at the properties for SS Express, I see that it shows the logon option that uses the built-in account "Network Service"rather than Local System or Local Service; is that correct? BTW the browser is always running in all this.
As you may gather, I know zip nada about SS, but I am an experienced VB/VBA/VC+/FP programmer of many years, did desktop Access databases w/VB6 frontends for a lot of customers, so I am familiar with DB design etc. I just know next to nothing about backend stuff like this, other than a little with BTrieve years ago.
Any help appreciated
Pete B
.
View 1 Replies
ADVERTISEMENT
Sep 19, 2007
Hi all,
In my office computer network system (LAN), my Windows XP Pro PC has SQL Server Express and VB 2005 Express installed and I was granted to have the Administrator priviledge to access SQL Server Express. I tried to create a SQLCLR project in my terminal PC.
1) I tried to set up a remote connection to SQL Server Express in the following way: SQL Server EXpress => SQL Server Surface Area Configuration. In the Surface Area Configuration for Service and Connection - local, I clicked on Remote Connection of Database Engine, SQLEXPRESS and I had a "dot" on "Local and remote connections" and "Using TCP/IP only". Then I clicked on "Apply" and "OK" buttons. Then I went to restart my database engine in SQL Server Management. When I went to check SQL Server 2005 Surface Area Configuration, I saw the arrow is pointing to "Service", not to "Remote Connections"!!!??? Is it right/normal? Please comment on this matter and tell me how I can have "Remote Connecton" on after I selected it.
2) After I restarted the database engine (I guess!!), I executed the following project code (copied from a book) in my VB 2005 Express:
//////////////--Form9.vb---/////////////////
mports System.Data.SqlClient
Imports System.Data
Public Class Form9
Dim cnn1 As New SqlConnection
Private Sub Form5_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
'Compute top-level project folder and use it as a prefix for
'the primary data file
Dim int1 As Integer = InStr(My.Application.Info.DirectoryPath, "bin")
Dim strPath As String = Microsoft.VisualBasic.Left(My.Application.Info.DirectoryPath, int1 - 1)
Dim pdbfph As String = strPath & "northwnd.mdf"
Dim cst As String = "Data Source=.sqlexpress;" & _
"Integrated Security=SSPI;" & _
"AttachDBFileName=" & pdbfph
cnn1.ConnectionString = cst
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
'Create a command to create a table
Dim cmd1 As New SqlCommand
cmd1.CommandText = "CREATE TABLE FromExcel (" & _
"FirstName nvarchar(15), " & _
"LastName nvarchar(20), " & _
"PersonID int Not Null)"
cmd1.Connection = cnn1
'Invoke the command
Try
cnn1.Open()
cmd1.ExecuteNonQuery()
MessageBox.Show("Command succeeded.", "Outcome", _
MessageBoxButtons.OK, MessageBoxIcon.Information)
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
End Sub
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
'Create a command to drop a table
Dim cmd1 As New SqlCommand
cmd1.CommandText = "DROP TABLE FromExcel"
cmd1.Connection = cnn1
'Invoke the command
Try
cnn1.Open()
cmd1.ExecuteNonQuery()
MessageBox.Show("Command succeeded.", "Outcome", _
MessageBoxButtons.OK, MessageBoxIcon.Information)
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
End Sub
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
'Declare FromExcel Data Table and RowForExcel DataRow
Dim FromExcel As New DataTable
Dim RowForExcel As DataRow
FromExcel.Columns.Add("FirstName", GetType(SqlTypes.SqlString))
FromExcel.Columns.Add("LastName", GetType(SqlTypes.SqlString))
FromExcel.Columns.Add("PersonID", GetType(SqlTypes.SqlInt32))
'Create TextFieldParser for CSV file from spreadsheet
Dim crd1 As Microsoft.VisualBasic.FileIO.TextFieldParser
Dim strPath As String = _
Microsoft.VisualBasic.Left( _
My.Application.Info.DirectoryPath, _
InStr(My.Application.Info.DirectoryPath, "bin") - 1)
crd1 = My.Computer.FileSystem.OpenTextFieldParser _
(My.Computer.FileSystem.CombinePath(strPath, "Book1.csv"))
crd1.TextFieldType = Microsoft.VisualBasic.FileIO.FieldType.Delimited
crd1.Delimiters = New String() {","}
'Loop through rows of CSV file and populate
'RowForExcel DataRow for adding to FromExcel
'Rows collection
Dim currentRow As String()
Do Until crd1.EndOfData
Try
currentRow = crd1.ReadFields()
Dim currentField As String
Dim int1 As Integer = 1
RowForExcel = FromExcel.NewRow
For Each currentField In currentRow
Select Case int1
Case 1
RowForExcel("FirstName") = currentField
Case 2
RowForExcel("LastName") = currentField
Case 3
RowForExcel("PersonID") = CInt(currentField)
End Select
int1 += 1
Next
int1 = 1
FromExcel.Rows.Add(RowForExcel)
RowForExcel = FromExcel.NewRow
Catch ex As Microsoft.VisualBasic.FileIO.MalformedLineException
MsgBox("Line " & ex.Message & _
"is not valid and will be skipped.")
End Try
Loop
'Invoke the WriteToServer method fo the sqc1 SqlBulkCopy
'object to populate FromExcel table in the database with
'the FromExcel DataTable in the project
Try
cnn1.Open()
Using sqc1 As SqlBulkCopy = New SqlBulkCopy(cnn1)
sqc1.DestinationTableName = "dbo.FromExcel"
sqc1.WriteToServer(FromExcel)
End Using
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
'Read the FromExcel table and display results in
'a message box
Dim strQuery As String = "SELECT * " & _
"FROM dbo.FromExcel "
Dim str1 As String = ""
Dim cmd1 As New SqlCommand(strQuery, cnn1)
cnn1.Open()
Dim rdr1 As SqlDataReader
rdr1 = cmd1.ExecuteReader()
Try
While rdr1.Read()
str1 += rdr1.GetString(0) & ", " & _
rdr1.GetString(1) & ", " & _
rdr1.GetSqlInt32(2).ToString & ControlChars.CrLf
End While
Finally
rdr1.Close()
cnn1.Close()
End Try
MessageBox.Show(str1, "FromExcel")
End Sub
End Class
//////////////////////////////////////////////////////////////////////////////
I got the following error messages:
SecurityException was unhandled
Request for the permission of type 'System. Security. Permissions.FileIOPermission,mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'failed that is pointing to the code statement "Dim int1 As Integer = InStr (My.Application.Info.DirectoryPath, "bin")."
Troubleshooting tips:
Store application data in isolated storage.
When deploying an Office solution, check to make sure you have fulfilled all necessary requirments.
Use a certificate to obtain the required permission(s).
If an assembly implementing the custom security references other assemblies, add the referenced assemblies to the full trust assembly list.
Get general help for the exception.
I am a new Microsoft VS.NET Express user to do the SQL Server 2005 Express and VB 2005 Express programming by using the example of a tutorial book. Please help and tell me what is wrong in my SQLCLR sep-up and project coding and how to correct the problems.
Many Thanks in advance,
Scott Chang
View 3 Replies
View Related
Sep 1, 2006
I have an application that will deployed on LANS running 1- 10 systems on average.
The front end is C#.net 2.0 and the backend will be sql express.
I need to enable remote connections by default because 99.5% of our customers have 2 or more computers.
I have two questions:
1) How do I enabled remote access during installation? Can I run the sqlExpress install silently and turn this on so that my users (who are very non-technical) do not have to go into surface configuration and turn on network access?
2) If I already have sql express installed (like on my development machine now) how do I enable remote access via a command line utility without having to run the surface configuration tool? I want to be able to execute a command to turn on network access so my users don't have to go to a GUI tool(Surface area configuration) and turn it on themselves. Can I use sqlcmd to turn on network access or some other command line utility that I can execute easily. Perhaps there is some type of .NET assembly that I can reference from within my C#.net application that will allow me to enable remote access? Basically How do i take care of this without making my users have to do it?
thanks in advance
View 3 Replies
View Related
May 7, 2007
Hi,
I'm having problems getting a remote connection to sql server express.
The application connects fine on the local PC (using SQL server authentication), however a networked laptop cannot connect to sql.
The PC/Laptop have been networked using the network wizard, and files on the PC are accesible from the laptop.
tcp/ip is enabled on express and the browser service is running. All firewalls have been switched off.
Any ideas?
View 3 Replies
View Related
May 3, 2007
Hi,
My Web Aplication read and write into a sql server express database. The database is in one server and the applicacion is running from my laptop.
Everything works well.
But if i publish the web in the same server that the sql server and getting the next error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
When am running the application from my laptop i am using the external IP and when I publish it in the same server i am changing the IP for the server name. The most interesting part is that the web can read but when it tries to insert is when am getting this error.
Any clue??' I can select, delete, insert using Microsoft SQl Server management Studio from my laptop, then the sql server accept remote connections.
I do not understand why the ASP.Net application works perfectly when runs from my computer but get this error when is publish in the server.
Any help will be more than appreciate.
Thanks in advance
View 8 Replies
View Related
Jul 6, 2006
My target market includes Micro-SMEs (i.e. 1 to 2 person business). This users often have multiple computers, but tend to run XP Home edition. Hence I need to set up a SQL Server Express on one of the machines and allow the other machines to access it.
So far I realise:
XP machines must be SP2ed (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=379560&SiteID=1)
XP Home machines need to be in the same work group (am I right?)
I have to Open up the MS Firewall on each of the machines for TCP ports 1433 and 1434 (see http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=511441&SiteID=1)
On the machine hosting the SQL Server Express instance, start the "Browser" Service (again http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=511441&SiteID=1)
I have several questions surrounding this.....
If I package SQL Express with my application is there away I can get the Browser to be started automatically? Do I need to write some custom code using the Microsoft.SqlServer.Management namespace?
My understanding of the SQL Server security model is that ideally I should ideally use Windows Authenticated users connections - how do I set up the remote XP Home user on the XP Home machine which is hosting the SQL Server Instance? I'm thing I may have to used Mixed Mode and pass the SQL Server username and password in the connection string. Am I right or can I use Windows Authenticated?
Are there any more resources other than http://msdn.microsoft.com/sql/express/default.aspx?pull=/library/en-us/dnsse/html/emsqlexcustapp.asp which I should look at for help on installing an app bound to SQL Server Express?
Thanks in advance
Ben
View 4 Replies
View Related
Feb 27, 2006
I've developed an asp.net 2.0 web app with vs 2005 and am using a SQL Server 2005 Express database. The app works fine locally, but after uploading to the remote web server the following error occures:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
How do I go about granting remote connections to SQL Server Express?
Does the web server have to have SQL Server Express installed in order to run apps that utilize SQL Server 2005 Express databases?
Do I grant access locally on my machine or do I have to be on the web server to grant remote connections?
I've been using .net 1.1 with access databases for the past couple of years, so this is all new to me.
Thanks.
View 27 Replies
View Related
Aug 15, 2006
Hello. I have SQLEXPRESS 2005 installed on my laptop running Windows XP Home Edition with SP2. I have an application that can connect to the local instance with no problem. The other day, I tried to configure SQLEXPRESS 2005 for a remote connection from my desktop. To date, I have been unable to figure out how to do this.
I have followed the instructions posted at various locations on the internet, but to no avail. While I can configure SQLEXPRESS 2005 to allow TCP/IP connections, I have been unable to restart the server.
Here is the pertinent snippet from the error log:
<time> Server A self-generated certificate was successfully loaded for encryption.
<time> Server Error: 26024, Severity: 16, State: 1.
2006-08-14 21:02:27.18 Server Server failed to listen on 'any' <ipv4> 0. Error: 0x277a. To proceed, notify your system administrator.
<time> Server Error: 17182, Severity: 16, State: 1.
<time> Server TDSSNIClient initialization failed with error 0x277a, status code 0xa.
<time> Server Error: 17182, Severity: 16, State: 1.
<time> Server TDSSNIClient initialization failed with error 0x277a, status code 0x1.
<time> Server Error: 17826, Severity: 18, State: 3.
<time> Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
<time> Server Error: 17120, Severity: 16, State: 1.
<time> Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I have a feeling this problem is due to the way my system is configured, not necessarily how my SQLEXPRESS 2005 is configured. My laptop and desktop are connected via a wireless router, and both machines are running Norton Anti-Virus 2006. I've added sqlserver.exe and sqlbrowser.exe to the exceptions list for the Worm protection on the laptop, i.e., the server machine. There's not a setting at the router that would prevent the server from re-starting, is there?
Any help is GREATLY appreciated!
Matt
View 15 Replies
View Related
Aug 23, 2006
Fellow Devs,
I have an instance of SQL Server Express 2005 running on another box and I have Remote Connections enabled over both TCP/IP and Named Pipes, but on my other box I keep getting the error that the server does not accept Remote Connections.
Any ideas why this might be happening? Is there some other configuration?
View 25 Replies
View Related
Oct 11, 2007
HiI'm going insane.I have a club starter kit on my local server which is working fine.I have migrated the database to my remote host and seems to have transfered ok.For a brief period I was able to connect to the database remotely, but now I cannot I get the following, even though SQL Server Surface Area Config is set to accept remote connections.An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)This is my connection string;<add name="ClubSiteDB" connectionString="Data Source=xx.xxx.xx.xx,xxxx; Network Library=DBMSSOCN; Initial Catalog=tets; User ID=sqladminbob;Password=sqlbob4398;" providerName="System.Data.SqlClient="/>I hav also tried to use aspnet_regsql.exe to add the remote provider but I get the same message. Thanks
View 3 Replies
View Related
Apr 10, 2008
Hi,I have SQL Server Express Edition. I tried working out some ASP.NET Labs in my local system. Here is the link of the Virtual Lab which I tried. http://msevents.microsoft.com/CUI/WebCastEventDetails.aspx?EventID=1032286906&EventCategory=3&culture=en-US&CountryCode=USI recieve this error in my local system. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I tried working out solutions from various websites. But the no solution is effective. Could anyone help me in solving this issue.
View 3 Replies
View Related
Oct 27, 2007
Does someone have a guide or a link to a guide to allow remote connections from a default install?
Just that I'm currently testing my setup on a work laptop but not having much success but thats probably down to the network admins limiting me far too much on here.
However I am getting a new DELL machine, which I'm gonna make sure the network admins get no where near. Once I have this machine I will be forwarding port 1433 to the machine, but need to know what other changes I need to make to allow my friend access to the machine as well.
So I'd need to know what server settings I need to change and also what my friend needs to do as a client.
thanks in advance!
View 4 Replies
View Related
May 20, 2008
Hi all,
I would like to enable remote connection on SQL Express 2005 using SMO.
How can I do it?
Thanks,
Assaf
View 5 Replies
View Related
Mar 26, 2008
Hello community
I have the following problem = /
http://img101.imageshack.us/my.php?image=asdfzv7.jpg
View 1 Replies
View Related
Jun 2, 2007
While trying to transfer my website project to another computer I am encountering an error when tryng to run the solution. It gives me a "Does not allow remote connections". Why is this when on the original computer everything worked fine.
Walter
View 2 Replies
View Related
Jul 12, 2007
Hi folks,Perhaps every 100 calls to DB i get 1 error message like this:"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)" i am using SQL 2000 and am wondering why this happens.I appreciate your help.Leo.
View 3 Replies
View Related
Feb 10, 2008
I am getting the following connection error:An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)When I run the page locally on my develepment environment, the page runs fine. I'm using VS2005 and SQL Server Management Studio Express.When I upload the page to the remote server, I get the connection error indicated above.To further troubleshoot the issue, I created a simple test page with the connection string hardcoded in the code-behind and binded to a dropdownlist using the following code:SqlConnection conn = new SqlConnection("Data Source=xxx.xxx.xxx.xx;network=DBMSSOCN;Initial Catalog=TechCenter;Persist Security Info=True;User ID=xxxxx;Password=xxxxxrx;Asynchronous Processing=True;MultipleActiveResultSets=True");
conn.Open(); SqlDataReader dr; SqlCommand command = new SqlCommand("SELECT RecordID, customer_id FROM Customers WHERE recordtype <> 'F' ORDER BY customer_id ASC", conn); dr = command.ExecuteReader(); while (dr.Read()) { DropDownList1.Items.Add(new ListItem(dr["customer_id"].ToString(), dr["RecordID"].ToString())); } dr.Close(); conn.Close();When I run the test page, it works fine, so I know I'm using the correct connection string properties.When I move the connection string to the web.config file and using a dataset with a tableadapter, I get the error about the sql server not allowing remote connections? I'm stumped. I cannot isolate the cause of the error.The remote server is using sql server 2000 and error indicates it is trying to connect to SQL Server 2005??? Any help would be greatly appreciated.Thank you.
View 5 Replies
View Related
Apr 11, 2001
I have a need to connect to a remote (i.e. database on the clients site) SQL Server database from a live application. It is relatively easy under Oracle, but I havent tried to do to an SQL Server. Has anyone done this? The remote SQL Server database in question is 6.5
You can set up odbc connections to remote clients (99% sure on this) so you could go this way. You can also connect directly to a sql box through an IP address in sql7, but I am not too sure how it is with 6.5.
View 1 Replies
View Related
Apr 18, 2008
Hi All,
I installed full version of SqlServer 2005. Iam able to Connect to all the systems that are in Intranet. But iam not able to Connect to the external systems (or) remote Connections. I followed all the steps that are in the following URL support.microsoft.com/kb/914277
Still iam getting the problem. Show me a way in this issue.
Thanks&Regards,
SrinivasReddy
View 3 Replies
View Related
Jul 11, 2006
Hello guys,
I would like to know how to enable remote connections to my SQLExpress installation? Thank you very much for any help!
Regards,
Fabian
my favorit hoster is ASPnix : www.aspnix.com !
View 4 Replies
View Related
Oct 11, 2006
Hello ,
The problem is that we are having Problem while making the remote Connection to the Sql Server 2005
Basically We are having a problem connecting to SQL2005 through a package remotely. when we try to connect to a remote data base, we get the following error
[Connection manager "CRA LRRS Development DB"] Error: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login timeout expired". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. ".
Although by running the configuration manager on the Remote DataBase System we have enable the Remote Connections through name and IP both but still it cant access it.
Please tell us the possible consequences and provide us the feedback.
I will be really obliged if any of you can provide us the feedback on it as soon as possible.
Thanking You,
Yours Sincerely,
Saima Salim
View 1 Replies
View Related
Apr 16, 2008
Hello,
In SQL Server 2005 configuration tools, is there a way to set SQL Server to remote connections and to set the TCP Port through c# code?
Thanks for your help.
View 1 Replies
View Related
Apr 7, 2008
I am having trouble with Report Manager. It seems that every day or every other day we get this message:
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No such host is known.) An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections."
To fix this we open the Surface Area Configuration for the server that hosts the Reporting Database and stop and restart the database engine then open up the Surface Area Configuration for the server that hosts the Report Manger database and stop and restart that database engine along with the Reporting Services Browser.
This actually may not be the exact order that we do the stop/starts because we have tried so many different combinations (ie. stop one then start another then restart that one, etc.). Anyway, we usually keep on stoping and restarting until we can get back into Report Manager without getting the error message from above.
Does anyone have any insight as to what this could be??
View 4 Replies
View Related
Mar 3, 2007
TITLE: Connect to Database Engine
------------------------------
Cannot connect to FRI-0503SQLEXPRESS.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.) (Microsoft SQL Server, Error: 10061)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10061&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
I have recieved this error and i have changed the surface area configuration to allow remote connections but it still won't allow them after i start and restart the server service. is there any way to fix this i have reinstalled several times and that has not yet fixed the problem either.
View 5 Replies
View Related
Dec 18, 2007
Hi all
This question has probably been asked a few times on the forum but none of the answers work for my situation.
I recently installed SQL Server 2005.
When trying to connect to my server, locally, using Management studio, I get the following error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53).
I have already enabled remote connections in the Surface Area Configuration, using TCP/IP and pipes.
I created exceptions in the Firewall and started the Server Browser service.
Please help
Thanks
View 5 Replies
View Related
Sep 21, 2006
I downloaded VS studio express, and created a personal website using the wizard to test drive the thing. When I hit ctr + f5 to run the sample provided, then I get this message:
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) "
I tried disabling the firewall (Norton's firewall because Windows is disable always). Any suggestions? This is a brand-new machine, running XP sp2, just downloaded the VS studio express.
I really appreciate your inputs.
Regards,
Carlos
info@paesano.com
View 4 Replies
View Related
Dec 5, 2006
Hi,
I'm without a clue when it comes to SQL and how to secure it!
I've set up a SQLExpress running on a dedicated server on the web and I'm using TCP/IP remote connection to connect to the DB from a the web server running the ASP .
Would it be better using named pipes?
Also is there some way I can additionally authenticate a connection based on IP numbers?
I would really appreciate some advice thanks.
View 1 Replies
View Related
Dec 8, 2006
Hi,
Attempting to open a new database engine from a Windows 2003
R2 server (x64) which is
running SQL Server 2005 to my desktop PC (XP Pro) which is running SQL 2005 developer
edition.
I€™ve opened up TCP/IP and named pipes and enabled all protocols
within surface area configuration and server
configuration manager but get this€¦
An error has occurred while establishing a connection to the
server. When connecting to SQL Server
2005, this failure may be caused by the fact that under the default settings
SQL Server does not allow remote connections. (provider: TCP Provider, error: 0
- A connection attempt failed because the connected party did not properly
respond after a period of time, or established connection failed because
connected host has failed to respond.) (Microsoft SQL Server, Error: 10060)
Is this a red-herring type message? I ask because the text
states €œthis failure may be caused€? and as far as I can see I€™ve open up my
PC to all connections.
Thanks in advance
Dave
View 10 Replies
View Related
Jul 2, 2007
hi,
sql server 2005 express is installed on comp1. my client application is installed on comp2 and comp3. all comps have win xp. when i run my application, it can't connect to sql server express. i got the following message:
an error has occured while establishing a connection to the server. when connecting to sql server 2005, the failure may be caused by the fact that under the default settings sql server does not allow remote connections. (provider: sql network interfaces, error 26 - error locating server/instance specified)
so, how can i solve this problem, to connect to the server?
View 4 Replies
View Related
Mar 3, 2007
TITLE: Connect to Database Engine
------------------------------
Cannot connect to FRI-0503SQLEXPRESS.
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.) (Microsoft SQL Server, Error: 10061)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10061&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
this is the error message i get and i don't know how to correct it. i have tried going into surface area configuration and setting it allow remote connections but that hasn't changed anything. i am at a loss for how to correct this situation.
View 1 Replies
View Related
Jan 25, 2007
when i try to add a new data connection from within Visual basic or C#, i get a 'provider: SQL Network Interfaces, error number 26 - error locating server/instance specified.
i have tried to allow remote connections through the sql configuration manager and the surface area configuration.
View 3 Replies
View Related
Dec 18, 2007
I've got the following error from running my aspx webpages, trying to communicate to the MSSQL 2005 database.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Shared Memory Provider, error: 40 - Could not open a connection to SQL Server)
I've see and read a lot of chatter on the forum on the topic, but didn't find my solution. I have done a number of things, all of which didn't shake the error.
1) I went into SQL Server Surface Area Configuration for Services and Connections, and set Remote Connections to Local and Remote Connections, using TCP/IP only
2) Disabled Firewall
3) Made exceptions throught the Firewall for SQL Server and SQL Browser
Any other suggestions, thanks in advance.
View 4 Replies
View Related
Apr 18, 2008
Hi All,
I Installed full version of SqlServer 2005. Iam able to connect to all of our systems which are in intranet. But iam not able to connect to external system. I performed all the steps that are mentioned in the following URL support.microsoft.com/kb/914277 . Even then i was not able to connect to the remote systems. I request you to show me a solution to this issue.
Thanks&Regards,
SrinivasReddy.Tadi
View 1 Replies
View Related
