Trying To Update In A Field That Contains Xml
Nov 11, 2013
Trying to run this SQL script
update Promotions
set PromotionDiscountData = '<ArrayOfPromotionRuleBase xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><PromotionRuleBase xsi:type="StartDatePromotionRule"><StartDate>2013-11-11T00:00:00</StartDate></PromotionRuleBase><PromotionRuleBase xsi:type="ExpirationDatePromotionRule"><ExpirationDate>2014-01-12T00:00:00</ExpirationDate></PromotionRuleBase><PromotionRuleBase xsi:type="ExpirationNumberOfUsesPerCustomerPromotionRule">
[code]...
but getting this error
Msg 402, Level 16, State 1, Line 1
The data types xml and varchar are incompatible in the equal to operator.Basically within each cell I am trying to change the StartDate only
View 5 Replies
ADVERTISEMENT
Nov 11, 2013
I want to update a field with a trigger only if a specific field is updated.
When I try the code below, it updates the field when any field in the record is updated. Is there a way to only make look at picked_dt?
ALTER TRIGGER [dbo].[UpdatePickedDate]
on [dbo].[oeordlin_sql]
after update
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
[Code] .....
View 4 Replies
View Related
Apr 16, 2015
If I have a table with 1 or more Nullable fields and I want to make sure that when an INSERT or UPDATE occurs and one or more of these fields are left to NULL either explicitly or implicitly is there I can set these to non-null values without interfering with the INSERT or UPDATE in as far as the other fields in the table?
EXAMPLE:
CREATE TABLE dbo.MYTABLE(
ID NUMERIC(18,0) IDENTITY(1,1) NOT NULL,
FirstName VARCHAR(50) NULL,
LastName VARCHAR(50) NULL,
[Code] ....
If an INSERT looks like any of the following what can I do to change the NULL being assigned to DateAdded to a real date, preferable the value of GetDate() at the time of the insert? I've heard of INSTEAD of Triggers but I'm not trying tto over rise the entire INSERT or update just the on (maybe 2) fields that are being left as null or explicitly set to null. The same would apply for any UPDATE where DateModified is not specified or explicitly set to NULL. I would want to change it so that DateModified is not null on any UPDATE.
INSERT INTO dbo.MYTABLE( FirstName, LastName, DateAdded)
VALUES('John','Smith',NULL)
INSERT INTO dbo.MYTABLE( FirstName, LastName)
VALUES('John','Smith')
INSERT INTO dbo.MYTABLE( FirstName, LastName, DateAdded)
SELECT FirstName, LastName, NULL
FROM MYOTHERTABLE
View 9 Replies
View Related
Mar 30, 2004
Hi all,
I have a problem about a query to update a table
UPDATE Email SET EmailDT='31 Mar 2004' WHERE Idx={BDF51DBD-9E4F-4990-A751-5B25D071E288}
where Idx field is a uniqueidentifier type and EmailDT is datetime type. I found that when this query calling by a VB app. then it have error "[Microsoft][ODBC SQL Server Driver]Syntax error or access violation" and i have tried again in Query Analyzer, same error also occur, the MS SQL server is version 7. Please help. thanks.
View 2 Replies
View Related
May 12, 2006
Not a SQL guy but can do enough to be dangerous :)Trying to update a record. We have records that have a field with datasurrounded by some comment text such as *** Previous Public Solution*** Start and *** Previous Public Solution *** End . What I am tryingto do is write a SQL statement that will:Check that field C100 = TICKET0001 (to test with one record beforerunning on whole db)Check that field C101 is = ClosedCheck that field C102 is nullCopy field C103 data to field C102 and strip out any words such as ***Previous Public Solution *** Start and *** Previous Public Solution*** endThanks for any help!Kevin
View 1 Replies
View Related
Oct 31, 2012
In Access, you have a combo with column designations for example me.combofield.column(x) and you can update another field with those column(x) values.
How do you do it in MS SQL?
I didn't mean "from a 'combo' field'" in SQL(!) I just want to reproduce the equivalent of an Access combo box.
View 14 Replies
View Related
Oct 25, 2006
Hi. I'm not such an expert in sql and I wanted to update a table's fields only if the value that im going to update it with is not null. How do I do that?
What I mean is something like:
---------------------------------------------------
Update database.dbo.table set
if(@newvalue !=null)
afield = @newvalue;
-------------------------------------------------
Really need your help on this. Thanks.
View 9 Replies
View Related
Jan 4, 2006
Hello,
I have a field in a table that I have to update to the number of the week.
Information i use is from another field, which is text in the format like :
01022005
02142005
07082005
11222005
...
12022005
mmddyyyy.
How to write an update to update empty field with a number of the week based on the value from another field.
Thank you very much.
View 3 Replies
View Related
Jan 24, 2007
if a db field "mynum" of type int contains for example the number 543.Is there a way I can update this field without first selecting the value?so for example set the the current value to +1
View 1 Replies
View Related
Feb 11, 2007
in sql server I want to update the "UpdatedDate" field automatically when I change ANY other field in that specific record.it has to be set to the current server time.
View 2 Replies
View Related
Jan 3, 2005
Hi,
I am trying to update a field in a temptable with the count of items in another table. To illustrate, CustomerID=23 and I want the number of occurences in the temp table. Here's the code which DOESN'T work:
INSERT INTO TempTable
(
CustomerID,
FirstName,
LastName,
DateAdded,
AlbumPicture,
LayoutCount
)
SELECT
Albums.CustomerID,
Customers.FirstName,
Customers.LastName,
DateAdded,
AlbumPicture,
COUNT(*) FROM Layouts WHERE Layout.customerID = Albums.CustomerID
FROM
Albums JOIN
Customers on (Albums.CustomerID=Customers.CustomerID)
Please take a look at the COUNT line. Here I want to count the occurences of a specific customerid in another table and put in into th LayoutCount field.
SQL server reports "Incorrect syntax near the keyword 'FROM'". Any ideas how to achieve this?
Many thanks!!
Eric
View 1 Replies
View Related
Jun 6, 2006
Is it possible to update the filed used in the inner join
Update t1 set t1.name=t2.name2
From t1 inner join t2 on t1.name = t2.name
View 1 Replies
View Related
Jun 12, 2001
Hello,
I am updating three fields (defined as decimal(18,4) NULL) in
a 1.7 million record table to 0.
This table is also very wide (meaning lot of columns). A simple
query like this -
Update Table1
Set [Decimal Field1] = 0,
[Decimal Field2] = 0,
[Decimal Field3] = 0
is taking forever (1+ hours) to run.
Either I may be doing something stupid here or I am missing
something vital.
Thanks for any help.
View 2 Replies
View Related
Jun 19, 2001
Hi,
I'm trying to use the Update command to change a field value. I only know the field name at run-time, how do you write this command. This is what I have done which just sets the variable @cFieldName to the value and not the field within the table.
UPDATE [Atable] SET @cFieldName = @aValue WHERE ([Id] = @Id_1)
Thanks
View 3 Replies
View Related
Sep 8, 2004
Hi all,
I have a table with millions of records, table has three fields: case_id,line_no and notedata field, notedata field is 60 chars long, datatype varchar.for each case_id there could be as many as 2000 line_no meaning 2000 notes. I need to compress these notes into one note by case_no, For example case_no 1 could have 2000 lines of notes but my comressed table shoul have only one line containing all 2000 notes in line_no sequence.
my compressed table contains two fields case_no and notetext, notetext is a text field.
here is the script I am trying to use to accomplish the task but it does not append more than 8000 chars in one case, so my notes are chopping of, how should I do this, please let me know of any suggestions..
Thanks.
truncate table eldoecinotescompressed
insert into eldoecinotescompressed (app_code, case_no)
select distinct app_code, substring(system_key, 6,8)
from eldoecinotes
DECLARE @case VARCHAR(20);
DECLARE @note VARCHAR(80);
DECLARE @lineno VARCHAR(5);
DECLARE notes_cursor CURSOR FOR
select substring(system_key, 6,8) case_no, line_no, rtrim(notedata) notedata FROM EldoECINotes
where substring(system_key, 6,8)<>''
order by 1,2;
OPEN notes_cursor;
FETCH NEXT FROM notes_cursor into @case, @lineno, @note;
WHILE (@@FETCH_STATUS = 0)
BEGIN
BEGIN TRANSACTION;
update eldoecinotescompressed
set notetext =
(case when isnull(datalength(notetext), 0) >= 0 then
substring(isnull(notetext,''), 1, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 8000 then
substring(isnull(notetext,''), 8001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 16000 then
substring(isnull(notetext,''), 16001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 24000 then
substring(isnull(notetext,''), 24001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 32000 then
substring(isnull(notetext,''), 32001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 40000 then
substring(isnull(notetext,''), 40001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 48000 then
substring(isnull(notetext,''), 48001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 56000 then
substring(isnull(notetext,''), 56001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 64000 then
substring(isnull(notetext,''), 64001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 72000 then
substring(isnull(notetext,''), 72001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 80000 then
substring(isnull(notetext,''), 80001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 88000 then
substring(isnull(notetext,''), 88001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 96000 then
substring(isnull(notetext,''), 96001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 104000 then
substring(isnull(notetext,''), 104001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 112000 then
substring(isnull(notetext,''), 112001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 120000 then
substring(isnull(notetext,''), 120001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 128000 then
substring(isnull(notetext,''), 128001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 136000 then
substring(isnull(notetext,''), 136001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 144000 then
substring(isnull(notetext,''), 144001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 152000 then
substring(isnull(notetext,''), 152001, 8000)
else '' end ) +
(case when isnull(datalength(notetext), 0) > 0 then
char(13) + char(10)
else '' end) +
isnull(@note,'')
where case_no=@case;
commit;
FETCH NEXT FROM notes_cursor into @case, @lineno, @note;
END
CLOSE notes_cursor;
DEALLOCATE notes_cursor;
View 3 Replies
View Related
Nov 21, 2005
I am tryin t to update the tbl1_ID from the tbl2_ID. How do I do a Update Join that will do a comparison on the param column and value columns so that I could get the correct ID into tble 1.
Tbl1 is my destination table and tbl2 is my source. Please Help.
ID Tbl1_ID tb1Param tbl1value
1NULLParam1 0
1NULLParam2 F
1NULLParam3 2
3NULLParam1 0
3NULLParam2 E
3NULLParam3 0
5NULLParam1 0
5NULLParam2 F
5NULLParma3 2
tbl2_ID tbl2Param tbl2value
100param1 0
101param1 1
102param1 2
103param1 3
104param1 4
105param2 E
106param2 F
107param2 H
108param2 HF
109param2 HS
110param2 L
111param2 LS
112param3 0
113param3 1
114param3 2
115param3 3
116param3 4
117param3 5
118param3 6
Here is what Im trying to do if you can understand this.
Update Tbl1
SET tb1ID = B.tbl2_ID
FROM tbl1 AS A JOIN tbl2 AS B
ON A.tbl1Param + A.tbl1Value = B.tbl2Param + A.tbl2value
View 2 Replies
View Related
Jul 25, 2006
This is my curren code for updaing ESN number. But this is incorrect.
<asp:SqlDataSource ID="ESNTrackingDataSource"
UpdateCommand="UPDATE [ESNTracking] SET [EsnNumber] = @EsnNumber WHERE [EsnTrackingId] = @EsnTrackingId"
OnInit="ESNTrackingDataSource_Init"
OnUpdating="ESNTrackingDataSource_Updating"
OnUpdated="ESNTrackingDataSource_Updated"
runat="server">
<UpdateParameters>
<asp:Parameter Type="String" Name="EsnNumber"></asp:Parameter>
</UpdateParameters>
</asp:SqlDataSource>
this is the Select statment I am trying to use so that I can update the Asset in Assets table and the ESN number in the ESN table. But using ESNId and AssetId.
This is my query that returns the ones are not assigned to and
Asset
SELECT DISTINCT EsnId, EsnNumber
FROM dbo.ESNTracking
WHERE (EsnId NOT IN (SELECT EsnId FROM dbo.EsnAsset))
View 1 Replies
View Related
Aug 17, 2004
Hi All,
I will be doing stress test for my app.
Loading thousands of records to the DB through bulk insert.
There's one field NText which I have left NULL because it will be hard to gen dummy flat file to it.
I have another table which has the Ntext Value which i will want to copy and duplicate to the other table.
what is the way to do it?
simply said i want to update a record with NULL value from one table with NText field with the value from another table..
View 1 Replies
View Related
Oct 4, 2004
I would like to append information to a varchar field with an update statement, for example the field currently contains a name (Mark) and I would like to add information to name for business purposes, to update it to Markqw215, is this possible to do with an update statement?
Thank you.
View 4 Replies
View Related
Oct 4, 2004
I would like to append information to a varchar field with an update statement, for example the field currently contains a name (Mark) and I would like to add information to name for business purposes, to update it to Markqw215, is this possible to do with an update statement?
Thank you.
View 1 Replies
View Related
Jul 12, 2007
ok, so we have a field in one of our db's, a do_not_synch field. this field has a datatype of char...
the following sql statement does not update the field..
update contacts
set do_not_synch = 'Y'
where id=1
and if i open up the table in sql server management studio, and cannot type in and save the value Y...yes i can update other fields in this row...so its not a permissions issue?
is there anything special i should have to do?
Cheers,
Justin
View 1 Replies
View Related
Dec 28, 2003
dear sirs,
this is my first contribution at you reputable forum ..
I have a serious problem which is .. I want to create a trigger which runs at the begining of each month .. so I created a table which has a field --> formula --> month(getdate()) i tested it by changing the month in the windows calender and each time i change the month it is updated in the table when I crated a trigger i checked if update(sal_month)
the trigger is as follows
========================================
create trigger tr_update_loan
on salary_month
for update
as
if update(sal_month)
begin
update hr_emp_loan
set payed = payed + one_loan , rest = rest - one_loan
end
=========================================
it returned an error "Column 'sal_month' cannot be used in an IF UPDATE clause because it is a computed column."
I tried to not to use if update() but when I change the date in the calender it is not updated in the other table
can any one help my in this because I'm doing my graduation project
View 6 Replies
View Related
Aug 20, 2013
I have this code
I want to update nilai = total where kd_bulan = 9 and nilai = 0 where kd_bulan = 12
View 13 Replies
View Related
Jan 17, 2014
I have update a table field and I like to know how do you "undo" the update? I set the field_length from 6 to 7 and like to undo this.Here is my command:
table = template_fileds
column= field_length.
filed name= field_name.
update template_fields set field_length='7' where field_name='assesscode9'
View 7 Replies
View Related
Sep 4, 2003
Using an SQL server and writing ASP code trying to set a numeric field to null.
ie ssql = "UPDATE users SET customer_id = null where name = 'Joe'"
Keeps on generating a syntax error
View 2 Replies
View Related
Apr 6, 2006
hello friend !!
i want to update date field but i am getting error like
update emp set convert(varchar(50),date_t,121) = '2006-03-31 19:56:36.933'
Server: Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'convert'.
please help me out
T.I.A
Shashank
View 20 Replies
View Related
May 29, 2006
Hi everybody,
Could someone help me ???
Iam starting with sql
My problem ..
Ihave a table Table_customer
In this table a column Table_customer.no
This column contain 8000 rows.
with customer numbers: like 30789
I would like to modify once all this row adding just before the number
a value to all these rows.This value will be a 60
So will have instaed of 30789 a 6030789
This column is an integer.
I have try a simple select wich give me this result
How i can do this with update ?
probably i have to convert fisrt to caracters
select kunr,nov_kunr=
'30'+ltrim(str(kunr))
from event
where kunr is not null
Thank
View 3 Replies
View Related
Feb 21, 2007
I have a table Class include field ID,Name,Email. With ID field.All data not Autocrement ! I want Update ID field autocrement . Please help me
View 2 Replies
View Related
Apr 4, 2007
i have problem when i want to update another field in the same sql command
i have tried this code:
"SQL = "UPDATE items SET item_status= 'issued' WHERE NO_INVENTORI= '" & Text5.Text & "' "
Set RS = Nothing
Set RS = con.Execute(SQL)
con.Close
"
an error occured said that" [Microsoft ](ODBC Microsoft Access Driver too few parameters.Expected 1."
what that does mean?
help me pliz..
View 8 Replies
View Related
Jul 23, 2005
How can I update only the date portion of a datetime field?Example:datetime field = '3/12/1995 12:05:50 PM'How can I change just the day '12' to a '7'Thanks
View 4 Replies
View Related
Jul 20, 2005
I have two tables STUDENTS and REGISTRATIONS. I wish to update mySTUDENT table field, LAST_ATTENDED_SESSION_ID from my REGISTRATIONtable of the max SESSION_ID found in the REGISTRATION table.STUDENT starts off with:STUDENT_ID LAST_ATTENDED_SESSION_ID123456789 000000234567890 000000345678901 000000REGISTRATIONS:STUDENT_ID SESSION_ID CLASS_ID123456789 200001 BUS100123456789 200102 BUS150123456789 200203 BUS160I want to update my STUDENT.LAST_ATTENDED_SESSION_ID with theMAX(SESSION_ID) found in REGISTRATIONS for each student.I'd end up with:STUDENT_ID LAST_ATTENDED_SESSION_ID123456789 200203234567890 000000345678901 000000I've found examples here about selects and sub-queries, but nothingyet in my situation with an update.TIARob
View 2 Replies
View Related
Jul 20, 2005
Hi,how can i update the data in a field like that:organizationamesurenamezipcityI want to update the content from "organization"into "eworganization" followed by "amesurenamezipcity"yoursmarvin
View 1 Replies
View Related
Aug 23, 2007
I need to update a field on a SQL Server table.
I load a foxpro table and then I need to look on a SQL Server table for a match, once I find a record match I need to update a field on the SQL Server table.
I do not want to upload records!.
Can anybody route me to a good example or feedback to accomplish it.
Thanks,
Sergio
View 1 Replies
View Related
